{"sources":{"src/BeezieCollectiblesV2.sol":{"content":"// SPDX-License-Identifier: UNLICENSED\npragma solidity 0.8.30;\n\n// OpenZeppelin Contracts\nimport {SignatureChecker} from \"@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol\";\nimport {MessageHashUtils} from \"@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol\";\nimport {Initializable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport {ERC2771ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/metatx/ERC2771ContextUpgradeable.sol\";\nimport {ERC2981Upgradeable} from \"@openzeppelin/contracts-upgradeable/token/common/ERC2981Upgradeable.sol\";\nimport {Strings} from \"@openzeppelin/contracts/utils/Strings.sol\";\n\n// ERC721A Contracts\nimport \"ERC721A-Upgradeable/contracts/extensions/ERC721AQueryableUpgradeable.sol\";\n\n// Constants\nimport {SEAPORT} from \"@/constants/Constants.sol\";\n\n// Structs\nimport {DBObject, Drop} from \"@/structs/Structs.sol\";\n\n// Interfaces\nimport {ICreatorToken} from \"@/interfaces/ICreatorToken.sol\";\nimport {ITransferValidator} from \"@/interfaces/ITransferValidator.sol\";\nimport {IPermit2} from \"@/interfaces/permit2/IPermit2.sol\";\n\n// Core\nimport {BeezieLocator} from \"@/BeezieLocator.sol\";\nimport {BeezieClawMachineFactoryV2} from \"@/BeezieClawMachineFactoryV2.sol\";\n\ncontract BeezieCollectiblesV2 is\n    Initializable,\n    UUPSUpgradeable,\n    ERC721AQueryableUpgradeable,\n    ERC2771ContextUpgradeable,\n    ERC2981Upgradeable,\n    ICreatorToken\n{\n    using Strings for uint256;\n\n    //----------------------------------\n    // Errors\n    //----------------------------------\n    error NotMinterOrOwner();\n    error InvalidSignature();\n    error AlreadyTokenized();\n    error NotAuthorized();\n    error UserBlacklisted();\n    //#Message: The URIs length must be equal to the sum of the amounts\n    error URISDoNotMatchAmount();\n\n    //----------------------------------\n    // Events\n    //----------------------------------\n    event Tokenized(uint256 indexed dbIdentifier, uint256 startToken, uint256 numTokens);\n    event PhysicalsRedeemed(bytes32 indexed orderHash, bytes32 indexed shippingHash, uint256[] tokenIds);\n    event BlacklistUpdated(address indexed user, bool blocked);\n\n    //----------------------------------\n    // Storage\n    //----------------------------------\n    address private _transferValidator;\n    string private _baseUri;\n\n    BeezieLocator public locator;\n\n    mapping(address => bool) private _isMinter;\n    mapping(uint256 => DBObject) private _dbObjects;\n    mapping(uint256 => string) private _tokenURIs; // OBSOLETE\n    uint256 public signerCounter;\n    address public dbSigner;\n\n    mapping(address => uint256) public nextClaimNonce;\n    mapping(address => bool) private _isTrustedForwarder;\n\n    /// @dev per-wallet blacklist\n    mapping(address => bool) private _isBlacklisted;\n\n\n    //----------------------------------\n    // Modifiers\n    //----------------------------------\n    modifier onlyAuthorized() {\n        require(_isAuthorized(_msgSender()), NotAuthorized());\n        _;\n    }\n\n    //----------------------------------\n    // Constructor\n    //----------------------------------\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(address _trustedForwarder) ERC2771ContextUpgradeable(_trustedForwarder) {\n        _disableInitializers();\n    }\n\n    //----------------------------------\n    // Initializer\n    //----------------------------------\n    function initialize(address _locator, address _feeRecipient, string memory baseUri)\n        public\n        initializerERC721A\n        initializer\n    {\n        __ERC721A_init(\"Beezie Collectibles\", \"CCLT\");\n        __ERC2981_init();\n        _setDefaultRoyalty(_feeRecipient, 700);\n\n        locator = BeezieLocator(_locator);\n\n        _baseUri = baseUri;\n    }\n\n    //----------------------------------\n    // External\n    //----------------------------------\n    /**\n     * @notice allows an admin to tokenize an *amount* of tokens for a given *receiver* and *dbIdentifier*.\n     * @param receivers - the addresses that will receive the tokens\n     * @param amounts - the amount of tokens to mint for each receiver\n     * @param signature the signature of the dbIdentifier, receiver, amount and signerCounter\n     */\n    function tokenize(\n        address[] calldata receivers,\n        uint256[] calldata amounts,\n        uint64 dbIdentifier,\n        bytes calldata signature\n    ) external {\n        _onlyMinter();\n        bytes32 message = getTokenizeDigest(receivers, amounts, dbIdentifier);\n        if (_dbObjects[dbIdentifier].numTokens > 0) revert AlreadyTokenized();\n        if (!SignatureChecker.isValidSignatureNow(dbSigner, message, signature)) {\n            revert InvalidSignature();\n        }\n        uint256 nextToken = _nextTokenId();\n        uint256 amount = sumOfArr(amounts);\n        _dbObjects[dbIdentifier] =\n            DBObject({startToken: uint128(nextToken), numTokens: uint128(amount), provenanceURI: \"\"});\n        for (uint256 i; i < receivers.length;) {\n            _mint(receivers[i], amounts[i]);\n            unchecked {\n                ++i;\n            }\n        }\n\n        emit Tokenized(dbIdentifier, nextToken, amount);\n    }\n\n    function batchBurnEmergency(uint256[] calldata tokenIds) external onlyAuthorized {\n        for (uint256 i; i < tokenIds.length;) {\n            _burn(tokenIds[i], false);\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    function claimPhysicals(\n        address owner,\n        uint256[] calldata tokenIds,\n        bytes32 shippingHash,\n        bytes calldata ownerSignature,\n        bytes calldata adminSignature\n    ) external {\n        bytes32 orderHash = keccak256(abi.encodePacked(nextClaimNonce[owner]++, tokenIds, shippingHash));\n\n        if (!SignatureChecker.isValidSignatureNow(owner, orderHash, ownerSignature)) revert InvalidSignature();\n        if (!SignatureChecker.isValidSignatureNow(dbSigner, orderHash, adminSignature)) revert InvalidSignature();\n        for (uint256 i; i < tokenIds.length;) {\n            // claimedTokenToShippingHash[tokenfIds[i]] = shippingHash;\n            _burn(tokenIds[i], true);\n            unchecked {\n                ++i;\n            }\n        }\n        emit PhysicalsRedeemed(orderHash, shippingHash, tokenIds);\n    }\n\n    /**\n     * @notice increments the signer counter\n     */\n    function incrementSignerCounter() public onlyAuthorized {\n        ++signerCounter;\n    }\n\n    /**\n     * @notice bulk transfers tokens from one address to another\n     * @param from - the address to transfer from\n     * @param to - the address to transfer to\n     * @param tokenIds - the ids of the tokens to transfer\n     */\n    function bulkTransferFrom(address from, address to, uint48[] calldata tokenIds) external {\n        for (uint256 i; i < tokenIds.length; i++) {\n            transferFrom(from, to, tokenIds[i]);\n        }\n    }\n\n    //----------------------------------\n    // Getters\n    //----------------------------------\n\n    /**\n     * @notice gets the digest of the tokenize message\n     * @param receivers - the addresses that will receive the tokens\n     * @param amounts - the amount of tokens to mint for each receiver\n     * @param dbIdentifier - the dbIdentifier\n     * @return the digest of the tokenize message\n     */\n    function getTokenizeDigest(address[] calldata receivers, uint256[] calldata amounts, uint64 dbIdentifier)\n        public\n        view\n        returns (bytes32)\n    {\n        return MessageHashUtils.toEthSignedMessageHash(\n            keccak256(abi.encodePacked(address(this), block.chainid, signerCounter, receivers, amounts, dbIdentifier))\n        );\n    }\n\n    function dbObject(uint256 dbIdentifier) external view returns (DBObject memory) {\n        return _dbObjects[dbIdentifier];\n    }\n\n    function isMinter(address _minter) external view returns (bool) {\n        if (_isMinter[_minter]) return true;\n        return _isAuthorized(_minter);\n    }\n\n    function tokenURI(uint256 tokenId)\n        public\n        view\n        override(ERC721AUpgradeable, IERC721AUpgradeable)\n        returns (string memory)\n    {\n        return string.concat(_baseURI(), tokenId.toString());\n    }\n\n    function ownershipsByTokenIds(uint256[] calldata tokenIds) external view returns (address[] memory) {\n        address[] memory owners = new address[](tokenIds.length);\n        for (uint256 i; i < tokenIds.length; i++) {\n            owners[i] = ownerOf(tokenIds[i]);\n        }\n        return owners;\n    }\n\n    function getTransferValidator() external view returns (address validator) {\n        return _transferValidator;\n    }\n\n    function getTransferValidationFunction() external pure returns (bytes4 functionSignature, bool isViewFunction) {\n        return (0xcaee23ea, true);\n    }\n\n    /**\n     * @notice Check if an address has a role\n     * @param role - the role to check\n     * @param account - the address to check\n     * @return True if the address has the role, false otherwise\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool) {\n        return locator.hasRole(role, account);\n    }\n\n    //----------------------------------\n    // Setters\n    //----------------------------------\n\n    function setMinterStatus(address _minter, bool _status) external onlyAuthorized {\n        _isMinter[_minter] = _status;\n    }\n\n    function setDbSigner(address _dbSigner) external onlyAuthorized {\n        dbSigner = _dbSigner;\n    }\n\n    function setTrustedForwarder(address forwarder, bool isTrusted) external onlyAuthorized {\n        _isTrustedForwarder[forwarder] = isTrusted;\n    }\n\n    function setTransferValidator(address validator) external onlyAuthorized {\n        address oldValidator = _transferValidator;\n        _transferValidator = validator;\n        emit TransferValidatorUpdated(oldValidator, validator);\n    }\n\n    function setDefaultRoyalty(address receiver, uint96 feeNumerator) external onlyAuthorized {\n        _setDefaultRoyalty(receiver, feeNumerator);\n    }\n\n    function setBaseURI(string memory baseUri) external onlyAuthorized {\n        _baseUri = baseUri;\n    }\n\n    //----------------------------------\n    // Internal\n    //----------------------------------\n\n    function _isAuthorized(address _address) internal view returns (bool) {\n        return locator.isAuthorized(_address);\n    }\n\n    function _onlyMinter() internal view {\n        if (!_isMinter[_msgSender()] && !_isAuthorized(_msgSender())) {\n            revert NotMinterOrOwner();\n        }\n    }\n\n    function _startTokenId() internal pure override returns (uint256) {\n        return 1;\n    }\n\n    function _baseURI() internal view override returns (string memory) {\n        return _baseUri;\n    }\n\n    function sumOfArr(uint256[] calldata arr) internal pure returns (uint256) {\n        uint256 sum;\n        for (uint256 i; i < arr.length; i++) {\n            sum += arr[i];\n        }\n        return sum;\n    }\n\n    //----------------------------------\n    // ERC721AUpgradeable OVERRIDES\n    //----------------------------------\n\n    function isApprovedForAll(address from, address operator)\n        public\n        view\n        virtual\n        override(IERC721AUpgradeable, ERC721AUpgradeable)\n        returns (bool)\n    {\n        if (operator == SEAPORT) return true;\n        (address bidRouter, address clawMachineFactory) = locator.getCollectiblesApprovalRequiredContracts();\n        if (operator == bidRouter) return true;\n        if (BeezieClawMachineFactoryV2(clawMachineFactory).isClawMachine(operator)) return true;\n        return super.isApprovedForAll(from, operator);\n    }\n\n    function _msgSenderERC721A() internal view override(ERC721AUpgradeable) returns (address) {\n        return _msgSender();\n    }\n\n    function _beforeTokenTransfers(address from, address to, uint256 startTokenId, uint256 quantity)\n        internal\n        view\n        override\n    {\n        if (from != address(0) && _isBlacklisted[from]) revert UserBlacklisted();\n        if (to != address(0) && _isBlacklisted[to]) revert UserBlacklisted();\n\n        if (_transferValidator != address(0)) {\n            if (from != address(0)) {\n                if (to != address(0)) {\n                    for (uint256 i; i < quantity; ++i) {\n                        ITransferValidator(_transferValidator)\n                            .validateTransfer(_msgSender(), from, to, startTokenId + i);\n                    }\n                }\n            }\n        }\n    }\n\n    //----------------------------------\n    // Blacklist (source of truth)\n    //----------------------------------\n\n    /**\n     * @notice Check whether `user` is on the blacklist\n     */\n    function isBlacklisted(address user) external view returns (bool) {\n        return _isBlacklisted[user];\n    }\n\n    /**\n     * @notice Set the blacklisted state for a batch of wallets.\n     * @dev Callable by BLACKLIST_MANAGER_ROLE or DEFAULT_ADMIN_ROLE.\n     */\n    function setBlacklisted(address[] calldata users, bool blocked) external {\n        require(\n            locator.isBlacklistManager(_msgSender()) || locator.isAdmin(_msgSender()),\n            NotAuthorized()\n        );\n        uint256 length = users.length;\n        for (uint256 i; i < length;) {\n            if (_isBlacklisted[users[i]] != blocked) {\n                _isBlacklisted[users[i]] = blocked;\n                emit BlacklistUpdated(users[i], blocked);\n            }\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    function supportsInterface(bytes4 interfaceId)\n        public\n        view\n        override(ERC721AUpgradeable, IERC721AUpgradeable, ERC2981Upgradeable)\n        returns (bool)\n    {\n        return ERC2981Upgradeable.supportsInterface(interfaceId) || ERC721AUpgradeable.supportsInterface(interfaceId);\n    }\n\n    //----------------------------------\n    // ERC2771ContextUpgradeable OVERRIDES\n    //----------------------------------\n\n    function isTrustedForwarder(address forwarder) public view override returns (bool) {\n        return super.isTrustedForwarder(forwarder) || _isTrustedForwarder[forwarder];\n    }\n\n    function _msgSender() internal view override(ERC2771ContextUpgradeable) returns (address) {\n        return ERC2771ContextUpgradeable._msgSender();\n    }\n\n    function _msgData() internal view override(ERC2771ContextUpgradeable) returns (bytes calldata) {\n        return ERC2771ContextUpgradeable._msgData();\n    }\n\n    function _contextSuffixLength() internal view override(ERC2771ContextUpgradeable) returns (uint256) {\n        return ERC2771ContextUpgradeable._contextSuffixLength();\n    }\n\n    //----------------------------------\n    // Upgrade Authorization\n    //----------------------------------\n    function _authorizeUpgrade(address newImplementation) internal override onlyAuthorized {}\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/cryptography/SignatureChecker.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/SignatureChecker.sol)\n\npragma solidity ^0.8.24;\n\nimport {ECDSA} from \"./ECDSA.sol\";\nimport {IERC1271} from \"../../interfaces/IERC1271.sol\";\nimport {IERC7913SignatureVerifier} from \"../../interfaces/IERC7913.sol\";\nimport {Bytes} from \"../Bytes.sol\";\n\n/**\n * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support:\n *\n * * ECDSA signatures from externally owned accounts (EOAs)\n * * ERC-1271 signatures from smart contract wallets like Argent and Safe Wallet (previously Gnosis Safe)\n * * ERC-7913 signatures from keys that do not have an Ethereum address of their own\n *\n * See https://eips.ethereum.org/EIPS/eip-1271[ERC-1271] and https://eips.ethereum.org/EIPS/eip-7913[ERC-7913].\n */\nlibrary SignatureChecker {\n    using Bytes for bytes;\n\n    /**\n     * @dev Checks if a signature is valid for a given signer and data hash. If the signer has code, the\n     * signature is validated against it using ERC-1271, otherwise it's validated using `ECDSA.recover`.\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     *\n     * NOTE: For an extended version of this function that supports ERC-7913 signatures, see {isValidSignatureNow-bytes-bytes32-bytes-}.\n     */\n    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {\n        if (signer.code.length == 0) {\n            (address recovered, ECDSA.RecoverError err, ) = ECDSA.tryRecover(hash, signature);\n            return err == ECDSA.RecoverError.NoError && recovered == signer;\n        } else {\n            return isValidERC1271SignatureNow(signer, hash, signature);\n        }\n    }\n\n    /**\n     * @dev Variant of {isValidSignatureNow} that takes a signature in calldata\n     */\n    function isValidSignatureNowCalldata(\n        address signer,\n        bytes32 hash,\n        bytes calldata signature\n    ) internal view returns (bool) {\n        if (signer.code.length == 0) {\n            (address recovered, ECDSA.RecoverError err, ) = ECDSA.tryRecoverCalldata(hash, signature);\n            return err == ECDSA.RecoverError.NoError && recovered == signer;\n        } else {\n            return isValidERC1271SignatureNow(signer, hash, signature);\n        }\n    }\n\n    /**\n     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated\n     * against the signer smart contract using ERC-1271.\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     */\n    function isValidERC1271SignatureNow(\n        address signer,\n        bytes32 hash,\n        bytes memory signature\n    ) internal view returns (bool result) {\n        bytes4 selector = IERC1271.isValidSignature.selector;\n        uint256 length = signature.length;\n\n        assembly (\"memory-safe\") {\n            // Encoded calldata is :\n            // [ 0x00 - 0x03 ] <selector>\n            // [ 0x04 - 0x23 ] <hash>\n            // [ 0x24 - 0x44 ] <signature offset> (0x40)\n            // [ 0x44 - 0x64 ] <signature length>\n            // [ 0x64 - ...  ] <signature data>\n            let ptr := mload(0x40)\n            mstore(ptr, selector)\n            mstore(add(ptr, 0x04), hash)\n            mstore(add(ptr, 0x24), 0x40)\n            mcopy(add(ptr, 0x44), signature, add(length, 0x20))\n\n            let success := staticcall(gas(), signer, ptr, add(length, 0x64), 0x00, 0x20)\n            result := and(success, and(gt(returndatasize(), 0x1f), eq(mload(0x00), selector)))\n        }\n    }\n\n    /**\n     * @dev Verifies a signature for a given ERC-7913 signer and hash.\n     *\n     * The signer is a `bytes` object that is the concatenation of an address and optionally a key:\n     * `verifier || key`. A signer must be at least 20 bytes long.\n     *\n     * Verification is done as follows:\n     *\n     * * If `signer.length < 20`: verification fails\n     * * If `signer.length == 20`: verification is done using {isValidSignatureNow}\n     * * Otherwise: verification is done using {IERC7913SignatureVerifier}\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     */\n    function isValidSignatureNow(\n        bytes memory signer,\n        bytes32 hash,\n        bytes memory signature\n    ) internal view returns (bool) {\n        if (signer.length < 20) {\n            return false;\n        } else if (signer.length == 20) {\n            return isValidSignatureNow(address(bytes20(signer)), hash, signature);\n        } else {\n            (bool success, bytes memory result) = address(bytes20(signer)).staticcall(\n                abi.encodeCall(IERC7913SignatureVerifier.verify, (signer.slice(20), hash, signature))\n            );\n            return (success &&\n                result.length >= 32 &&\n                abi.decode(result, (bytes32)) == bytes32(IERC7913SignatureVerifier.verify.selector));\n        }\n    }\n\n    /**\n     * @dev Verifies multiple ERC-7913 `signatures` for a given `hash` using a set of `signers`.\n     * Returns `false` if the number of signers and signatures is not the same.\n     *\n     * The signers should be ordered by their `keccak256` hash to ensure efficient duplication check. Unordered\n     * signers are supported, but the uniqueness check will be more expensive.\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     */\n    function areValidSignaturesNow(\n        bytes32 hash,\n        bytes[] memory signers,\n        bytes[] memory signatures\n    ) internal view returns (bool) {\n        if (signers.length != signatures.length) return false;\n\n        bytes32 lastId = bytes32(0);\n\n        for (uint256 i = 0; i < signers.length; ++i) {\n            bytes memory signer = signers[i];\n\n            // If one of the signatures is invalid, reject the batch\n            if (!isValidSignatureNow(signer, hash, signatures[i])) return false;\n\n            bytes32 id = keccak256(signer);\n            // If the current signer ID is greater than all previous IDs, then this is a new signer.\n            if (lastId < id) {\n                lastId = id;\n            } else {\n                // If this signer id is not greater than all the previous ones, verify that it is not a duplicate of a previous one\n                // This loop is never executed if the signers are ordered by id.\n                for (uint256 j = 0; j < i; ++j) {\n                    if (id == keccak256(signers[j])) return false;\n                }\n            }\n        }\n\n        return true;\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/MessageHashUtils.sol)\n\npragma solidity ^0.8.24;\n\nimport {Strings} from \"../Strings.sol\";\n\n/**\n * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.\n *\n * The library provides methods for generating a hash of a message that conforms to the\n * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]\n * specifications.\n */\nlibrary MessageHashUtils {\n    error ERC5267ExtensionsNotSupported();\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing a bytes32 `messageHash` with\n     * `\"\\x19Ethereum Signed Message:\\n32\"` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with\n     * keccak256, although any bytes32 value can be safely used because the final digest will\n     * be re-hashed.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, \"\\x19Ethereum Signed Message:\\n32\") // 32 is the bytes-length of messageHash\n            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix\n            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x45` (`personal_sign` messages).\n     *\n     * The digest is calculated by prefixing an arbitrary `message` with\n     * `\"\\x19Ethereum Signed Message:\\n\" + len(message)` and hashing the result. It corresponds with the\n     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {\n        return\n            keccak256(bytes.concat(\"\\x19Ethereum Signed Message:\\n\", bytes(Strings.toString(message.length)), message));\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an ERC-191 signed data with version\n     * `0x00` (data with intended validator).\n     *\n     * The digest is calculated by prefixing an arbitrary `data` with `\"\\x19\\x00\"` and the intended\n     * `validator` address. Then hashing the result.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(hex\"19_00\", validator, data));\n    }\n\n    /**\n     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.\n     */\n    function toDataWithIntendedValidatorHash(\n        address validator,\n        bytes32 messageHash\n    ) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            mstore(0x00, hex\"19_00\")\n            mstore(0x02, shl(96, validator))\n            mstore(0x16, messageHash)\n            digest := keccak256(0x00, 0x36)\n        }\n    }\n\n    /**\n     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).\n     *\n     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with\n     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.\n     *\n     * See {ECDSA-recover}.\n     */\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            mstore(ptr, hex\"19_01\")\n            mstore(add(ptr, 0x02), domainSeparator)\n            mstore(add(ptr, 0x22), structHash)\n            digest := keccak256(ptr, 0x42)\n        }\n    }\n\n    /**\n     * @dev Returns the EIP-712 domain separator constructed from an `eip712Domain`. See {IERC5267-eip712Domain}\n     *\n     * This function dynamically constructs the domain separator based on which fields are present in the\n     * `fields` parameter. It contains flags that indicate which domain fields are present:\n     *\n     * * Bit 0 (0x01): name\n     * * Bit 1 (0x02): version\n     * * Bit 2 (0x04): chainId\n     * * Bit 3 (0x08): verifyingContract\n     * * Bit 4 (0x10): salt\n     *\n     * Arguments that correspond to fields which are not present in `fields` are ignored. For example, if `fields` is\n     * `0x0f` (`0b01111`), then the `salt` parameter is ignored.\n     */\n    function toDomainSeparator(\n        bytes1 fields,\n        string memory name,\n        string memory version,\n        uint256 chainId,\n        address verifyingContract,\n        bytes32 salt\n    ) internal pure returns (bytes32 hash) {\n        return\n            toDomainSeparator(\n                fields,\n                keccak256(bytes(name)),\n                keccak256(bytes(version)),\n                chainId,\n                verifyingContract,\n                salt\n            );\n    }\n\n    /// @dev Variant of {toDomainSeparator-bytes1-string-string-uint256-address-bytes32} that uses hashed name and version.\n    function toDomainSeparator(\n        bytes1 fields,\n        bytes32 nameHash,\n        bytes32 versionHash,\n        uint256 chainId,\n        address verifyingContract,\n        bytes32 salt\n    ) internal pure returns (bytes32 hash) {\n        bytes32 domainTypeHash = toDomainTypeHash(fields);\n\n        assembly (\"memory-safe\") {\n            // align fields to the right for easy processing\n            fields := shr(248, fields)\n\n            // FMP used as scratch space\n            let fmp := mload(0x40)\n            mstore(fmp, domainTypeHash)\n\n            let ptr := add(fmp, 0x20)\n            if and(fields, 0x01) {\n                mstore(ptr, nameHash)\n                ptr := add(ptr, 0x20)\n            }\n            if and(fields, 0x02) {\n                mstore(ptr, versionHash)\n                ptr := add(ptr, 0x20)\n            }\n            if and(fields, 0x04) {\n                mstore(ptr, chainId)\n                ptr := add(ptr, 0x20)\n            }\n            if and(fields, 0x08) {\n                mstore(ptr, verifyingContract)\n                ptr := add(ptr, 0x20)\n            }\n            if and(fields, 0x10) {\n                mstore(ptr, salt)\n                ptr := add(ptr, 0x20)\n            }\n\n            hash := keccak256(fmp, sub(ptr, fmp))\n        }\n    }\n\n    /// @dev Builds an EIP-712 domain type hash depending on the `fields` provided, following https://eips.ethereum.org/EIPS/eip-5267[ERC-5267]\n    function toDomainTypeHash(bytes1 fields) internal pure returns (bytes32 hash) {\n        if (fields & 0x20 == 0x20) revert ERC5267ExtensionsNotSupported();\n\n        assembly (\"memory-safe\") {\n            // align fields to the right for easy processing\n            fields := shr(248, fields)\n\n            // FMP used as scratch space\n            let fmp := mload(0x40)\n            mstore(fmp, \"EIP712Domain(\")\n\n            let ptr := add(fmp, 0x0d)\n            // name field\n            if and(fields, 0x01) {\n                mstore(ptr, \"string name,\")\n                ptr := add(ptr, 0x0c)\n            }\n            // version field\n            if and(fields, 0x02) {\n                mstore(ptr, \"string version,\")\n                ptr := add(ptr, 0x0f)\n            }\n            // chainId field\n            if and(fields, 0x04) {\n                mstore(ptr, \"uint256 chainId,\")\n                ptr := add(ptr, 0x10)\n            }\n            // verifyingContract field\n            if and(fields, 0x08) {\n                mstore(ptr, \"address verifyingContract,\")\n                ptr := add(ptr, 0x1a)\n            }\n            // salt field\n            if and(fields, 0x10) {\n                mstore(ptr, \"bytes32 salt,\")\n                ptr := add(ptr, 0x0d)\n            }\n            // if any field is enabled, remove the trailing comma\n            ptr := sub(ptr, iszero(iszero(and(fields, 0x1f))))\n            // add the closing brace\n            mstore8(ptr, 0x29) // add closing brace\n            ptr := add(ptr, 1)\n\n            hash := keccak256(fmp, sub(ptr, fmp))\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/proxy/utils/Initializable.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.20;\n\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/proxy/utils/UUPSUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.22;\n\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts/proxy/utils/UUPSUpgradeable.sol\";\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/metatx/ERC2771ContextUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (metatx/ERC2771Context.sol)\n\npragma solidity ^0.8.20;\n\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Context variant with ERC-2771 support.\n *\n * WARNING: Avoid using this pattern in contracts that rely on a specific calldata length as they'll\n * be affected by any forwarder whose `msg.data` is suffixed with the `from` address according to the ERC-2771\n * specification adding the address size in bytes (20) to the calldata size. An example of an unexpected\n * behavior could be an unintended fallback (or another function) invocation while trying to invoke the `receive`\n * function only accessible if `msg.data.length == 0`.\n *\n * WARNING: The usage of `delegatecall` in this contract is dangerous and may result in context corruption.\n * Any forwarded request to this contract triggering a `delegatecall` to itself will result in an invalid {_msgSender}\n * recovery.\n */\nabstract contract ERC2771ContextUpgradeable is Initializable, ContextUpgradeable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address private immutable _trustedForwarder;\n\n    /**\n     * @dev Initializes the contract with a trusted forwarder, which will be able to\n     * invoke functions on this contract on behalf of other accounts.\n     *\n     * NOTE: The trusted forwarder can be replaced by overriding {trustedForwarder}.\n     */\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(address trustedForwarder_) {\n        _trustedForwarder = trustedForwarder_;\n    }\n\n    /**\n     * @dev Returns the address of the trusted forwarder.\n     */\n    function trustedForwarder() public view virtual returns (address) {\n        return _trustedForwarder;\n    }\n\n    /**\n     * @dev Indicates whether any particular address is the trusted forwarder.\n     */\n    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {\n        return forwarder == trustedForwarder();\n    }\n\n    /**\n     * @dev Override for `msg.sender`. Defaults to the original `msg.sender` whenever\n     * a call is not performed by the trusted forwarder or the calldata length is less than\n     * 20 bytes (an address length).\n     */\n    function _msgSender() internal view virtual override returns (address) {\n        uint256 calldataLength = msg.data.length;\n        uint256 contextSuffixLength = _contextSuffixLength();\n        if (calldataLength >= contextSuffixLength && isTrustedForwarder(msg.sender)) {\n            unchecked {\n                return address(bytes20(msg.data[calldataLength - contextSuffixLength:]));\n            }\n        } else {\n            return super._msgSender();\n        }\n    }\n\n    /**\n     * @dev Override for `msg.data`. Defaults to the original `msg.data` whenever\n     * a call is not performed by the trusted forwarder or the calldata length is less than\n     * 20 bytes (an address length).\n     */\n    function _msgData() internal view virtual override returns (bytes calldata) {\n        uint256 calldataLength = msg.data.length;\n        uint256 contextSuffixLength = _contextSuffixLength();\n        if (calldataLength >= contextSuffixLength && isTrustedForwarder(msg.sender)) {\n            unchecked {\n                return msg.data[:calldataLength - contextSuffixLength];\n            }\n        } else {\n            return super._msgData();\n        }\n    }\n\n    /**\n     * @dev ERC-2771 specifies the context as being a single address (20 bytes).\n     */\n    function _contextSuffixLength() internal view virtual override returns (uint256) {\n        return 20;\n    }\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/token/common/ERC2981Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/common/ERC2981.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC2981} from \"@openzeppelin/contracts/interfaces/IERC2981.sol\";\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {ERC165Upgradeable} from \"../../utils/introspection/ERC165Upgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the ERC. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981Upgradeable is Initializable, IERC2981, ERC165Upgradeable {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.ERC2981\n    struct ERC2981Storage {\n        RoyaltyInfo _defaultRoyaltyInfo;\n        mapping(uint256 tokenId => RoyaltyInfo) _tokenRoyaltyInfo;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ERC2981\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant ERC2981StorageLocation = 0xdaedc9ab023613a7caf35e703657e986ccfad7e3eb0af93a2853f8d65dd86b00;\n\n    function _getERC2981Storage() private pure returns (ERC2981Storage storage $) {\n        assembly {\n            $.slot := ERC2981StorageLocation\n        }\n    }\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for a specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    function __ERC2981_init() internal onlyInitializing {\n    }\n\n    function __ERC2981_init_unchained() internal onlyInitializing {\n    }\n    /// @inheritdoc IERC165\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165Upgradeable) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /// @inheritdoc IERC2981\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) public view virtual returns (address receiver, uint256 amount) {\n        ERC2981Storage storage $ = _getERC2981Storage();\n        RoyaltyInfo storage _royaltyInfo = $._tokenRoyaltyInfo[tokenId];\n        address royaltyReceiver = _royaltyInfo.receiver;\n        uint96 royaltyFraction = _royaltyInfo.royaltyFraction;\n\n        if (royaltyReceiver == address(0)) {\n            royaltyReceiver = $._defaultRoyaltyInfo.receiver;\n            royaltyFraction = $._defaultRoyaltyInfo.royaltyFraction;\n        }\n\n        uint256 royaltyAmount = (salePrice * royaltyFraction) / _feeDenominator();\n\n        return (royaltyReceiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        ERC2981Storage storage $ = _getERC2981Storage();\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        $._defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        ERC2981Storage storage $ = _getERC2981Storage();\n        delete $._defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        ERC2981Storage storage $ = _getERC2981Storage();\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        $._tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        ERC2981Storage storage $ = _getERC2981Storage();\n        delete $._tokenRoyaltyInfo[tokenId];\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Strings.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Strings.sol)\n\npragma solidity ^0.8.24;\n\nimport {Math} from \"./math/Math.sol\";\nimport {SafeCast} from \"./math/SafeCast.sol\";\nimport {SignedMath} from \"./math/SignedMath.sol\";\nimport {Bytes} from \"./Bytes.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    using SafeCast for *;\n\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n    uint256 private constant SPECIAL_CHARS_LOOKUP =\n        (1 << 0x08) | // backspace\n            (1 << 0x09) | // tab\n            (1 << 0x0a) | // newline\n            (1 << 0x0c) | // form feed\n            (1 << 0x0d) | // carriage return\n            (1 << 0x22) | // double quote\n            (1 << 0x5c); // backslash\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev The string being parsed contains characters that are not in scope of the given base.\n     */\n    error StringsInvalidChar();\n\n    /**\n     * @dev The string being parsed is not a properly formatted address.\n     */\n    error StringsInvalidAddressFormat();\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            assembly (\"memory-safe\") {\n                ptr := add(add(buffer, 0x20), length)\n            }\n            while (true) {\n                ptr--;\n                assembly (\"memory-safe\") {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal\n     * representation, according to EIP-55.\n     */\n    function toChecksumHexString(address addr) internal pure returns (string memory) {\n        bytes memory buffer = bytes(toHexString(addr));\n\n        // hash the hex part of buffer (skip length + 2 bytes, length 40)\n        uint256 hashValue;\n        assembly (\"memory-safe\") {\n            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))\n        }\n\n        for (uint256 i = 41; i > 1; --i) {\n            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)\n            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {\n                // case shift by xoring with 0x20\n                buffer[i] ^= 0x20;\n            }\n            hashValue >>= 4;\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts a `bytes` buffer to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(bytes memory input) internal pure returns (string memory) {\n        unchecked {\n            bytes memory buffer = new bytes(2 * input.length + 2);\n            buffer[0] = \"0\";\n            buffer[1] = \"x\";\n            for (uint256 i = 0; i < input.length; ++i) {\n                uint8 v = uint8(input[i]);\n                buffer[2 * i + 2] = HEX_DIGITS[v >> 4];\n                buffer[2 * i + 3] = HEX_DIGITS[v & 0xf];\n            }\n            return string(buffer);\n        }\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return Bytes.equal(bytes(a), bytes(b));\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input) internal pure returns (uint256) {\n        return parseUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[0-9]*`\n     * - The result must fit into an `uint256` type\n     */\n    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        uint256 result = 0;\n        for (uint256 i = begin; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 9) return (false, 0);\n            result *= 10;\n            result += chr;\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a decimal string and returns the value as a `int256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input) internal pure returns (int256) {\n        return parseInt(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `[-+]?[0-9]*`\n     * - The result must fit in an `int256` type.\n     */\n    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {\n        (bool success, int256 value) = tryParseInt(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if\n     * the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {\n        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    uint256 private constant ABS_MIN_INT256 = 2 ** 255;\n\n    /**\n     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid\n     * character or if the result does not fit in a `int256`.\n     *\n     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.\n     */\n    function tryParseInt(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, int256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseIntUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseIntUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, int256 value) {\n        bytes memory buffer = bytes(input);\n\n        // Check presence of a negative sign.\n        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        bool positiveSign = sign == bytes1(\"+\");\n        bool negativeSign = sign == bytes1(\"-\");\n        uint256 offset = (positiveSign || negativeSign).toUint();\n\n        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);\n\n        if (absSuccess && absValue < ABS_MIN_INT256) {\n            return (true, negativeSign ? -int256(absValue) : int256(absValue));\n        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {\n            return (true, type(int256).min);\n        } else return (false, 0);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as a `uint256`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input) internal pure returns (uint256) {\n        return parseHexUint(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`\n     * - The result must fit in an `uint256` type.\n     */\n    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {\n        (bool success, uint256 value) = tryParseHexUint(input, begin, end);\n        if (!success) revert StringsInvalidChar();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {\n        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an\n     * invalid character.\n     *\n     * NOTE: This function will revert if the result does not fit in a `uint256`.\n     */\n    function tryParseHexUint(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, uint256 value) {\n        if (end > bytes(input).length || begin > end) return (false, 0);\n        return _tryParseHexUintUncheckedBounds(input, begin, end);\n    }\n\n    /**\n     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that\n     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.\n     */\n    function _tryParseHexUintUncheckedBounds(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) private pure returns (bool success, uint256 value) {\n        bytes memory buffer = bytes(input);\n\n        // skip 0x prefix if present\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 offset = hasPrefix.toUint() * 2;\n\n        uint256 result = 0;\n        for (uint256 i = begin + offset; i < end; ++i) {\n            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));\n            if (chr > 15) return (false, 0);\n            result *= 16;\n            unchecked {\n                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).\n                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.\n                result += chr;\n            }\n        }\n        return (true, result);\n    }\n\n    /**\n     * @dev Parse a hexadecimal string (with or without \"0x\" prefix), and returns the value as an `address`.\n     *\n     * Requirements:\n     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input) internal pure returns (address) {\n        return parseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and\n     * `end` (excluded).\n     *\n     * Requirements:\n     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`\n     */\n    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {\n        (bool success, address value) = tryParseAddress(input, begin, end);\n        if (!success) revert StringsInvalidAddressFormat();\n        return value;\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly\n     * formatted address. See {parseAddress-string} requirements.\n     */\n    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {\n        return tryParseAddress(input, 0, bytes(input).length);\n    }\n\n    /**\n     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly\n     * formatted address. See {parseAddress-string-uint256-uint256} requirements.\n     */\n    function tryParseAddress(\n        string memory input,\n        uint256 begin,\n        uint256 end\n    ) internal pure returns (bool success, address value) {\n        if (end > bytes(input).length || begin > end) return (false, address(0));\n\n        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2(\"0x\"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty\n        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;\n\n        // check that input is the correct length\n        if (end - begin == expectedLength) {\n            // length guarantees that this does not overflow, and value is at most type(uint160).max\n            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);\n            return (s, address(uint160(v)));\n        } else {\n            return (false, address(0));\n        }\n    }\n\n    function _tryParseChr(bytes1 chr) private pure returns (uint8) {\n        uint8 value = uint8(chr);\n\n        // Try to parse `chr`:\n        // - Case 1: [0-9]\n        // - Case 2: [a-f]\n        // - Case 3: [A-F]\n        // - otherwise not supported\n        unchecked {\n            if (value > 47 && value < 58) value -= 48;\n            else if (value > 96 && value < 103) value -= 87;\n            else if (value > 64 && value < 71) value -= 55;\n            else return type(uint8).max;\n        }\n\n        return value;\n    }\n\n    /**\n     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.\n     *\n     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.\n     *\n     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of\n     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode\n     * characters that are not in this range, but other tooling may provide different results.\n     */\n    function escapeJSON(string memory input) internal pure returns (string memory) {\n        bytes memory buffer = bytes(input);\n        bytes memory output = new bytes(2 * buffer.length); // worst case scenario\n        uint256 outputLength = 0;\n\n        for (uint256 i = 0; i < buffer.length; ++i) {\n            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));\n            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {\n                output[outputLength++] = \"\\\\\";\n                if (char == 0x08) output[outputLength++] = \"b\";\n                else if (char == 0x09) output[outputLength++] = \"t\";\n                else if (char == 0x0a) output[outputLength++] = \"n\";\n                else if (char == 0x0c) output[outputLength++] = \"f\";\n                else if (char == 0x0d) output[outputLength++] = \"r\";\n                else if (char == 0x5c) output[outputLength++] = \"\\\\\";\n                else if (char == 0x22) {\n                    // solhint-disable-next-line quotes\n                    output[outputLength++] = '\"';\n                }\n            } else {\n                output[outputLength++] = char;\n            }\n        }\n        // write the actual length and deallocate unused memory\n        assembly (\"memory-safe\") {\n            mstore(output, outputLength)\n            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))\n        }\n\n        return string(output);\n    }\n\n    /**\n     * @dev Reads a bytes32 from a bytes array without bounds checking.\n     *\n     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the\n     * assembly block as such would prevent some optimizations.\n     */\n    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {\n        // This is not memory safe in the general case, but all calls to this private function are within bounds.\n        assembly (\"memory-safe\") {\n            value := mload(add(add(buffer, 0x20), offset))\n        }\n    }\n}\n"},"lib/ERC721A-Upgradeable/contracts/extensions/ERC721AQueryableUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721AQueryableUpgradeable.sol';\nimport '../ERC721AUpgradeable.sol';\nimport '../ERC721A__Initializable.sol';\n\n/**\n * @title ERC721AQueryable.\n *\n * @dev ERC721A subclass with convenience query functions.\n */\nabstract contract ERC721AQueryableUpgradeable is\n    ERC721A__Initializable,\n    ERC721AUpgradeable,\n    IERC721AQueryableUpgradeable\n{\n    function __ERC721AQueryable_init() internal onlyInitializingERC721A {\n        __ERC721AQueryable_init_unchained();\n    }\n\n    function __ERC721AQueryable_init_unchained() internal onlyInitializingERC721A {}\n\n    /**\n     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n     *\n     * If the `tokenId` is out of bounds:\n     *\n     * - `addr = address(0)`\n     * - `startTimestamp = 0`\n     * - `burned = false`\n     * - `extraData = 0`\n     *\n     * If the `tokenId` is burned:\n     *\n     * - `addr = <Address of owner before token was burned>`\n     * - `startTimestamp = <Timestamp when token was burned>`\n     * - `burned = true`\n     * - `extraData = <Extra data when token was burned>`\n     *\n     * Otherwise:\n     *\n     * - `addr = <Address of owner>`\n     * - `startTimestamp = <Timestamp of start of ownership>`\n     * - `burned = false`\n     * - `extraData = <Extra data at start of ownership>`\n     */\n    function explicitOwnershipOf(uint256 tokenId) public view virtual override returns (TokenOwnership memory) {\n        TokenOwnership memory ownership;\n        if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {\n            return ownership;\n        }\n        ownership = _ownershipAt(tokenId);\n        if (ownership.burned) {\n            return ownership;\n        }\n        return _ownershipOf(tokenId);\n    }\n\n    /**\n     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n     * See {ERC721AQueryable-explicitOwnershipOf}\n     */\n    function explicitOwnershipsOf(uint256[] calldata tokenIds)\n        external\n        view\n        virtual\n        override\n        returns (TokenOwnership[] memory)\n    {\n        unchecked {\n            uint256 tokenIdsLength = tokenIds.length;\n            TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);\n            for (uint256 i; i != tokenIdsLength; ++i) {\n                ownerships[i] = explicitOwnershipOf(tokenIds[i]);\n            }\n            return ownerships;\n        }\n    }\n\n    /**\n     * @dev Returns an array of token IDs owned by `owner`,\n     * in the range [`start`, `stop`)\n     * (i.e. `start <= tokenId < stop`).\n     *\n     * This function allows for tokens to be queried if the collection\n     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n     *\n     * Requirements:\n     *\n     * - `start < stop`\n     */\n    function tokensOfOwnerIn(\n        address owner,\n        uint256 start,\n        uint256 stop\n    ) external view virtual override returns (uint256[] memory) {\n        unchecked {\n            if (start >= stop) revert InvalidQueryRange();\n            uint256 tokenIdsIdx;\n            uint256 stopLimit = _nextTokenId();\n            // Set `start = max(start, _startTokenId())`.\n            if (start < _startTokenId()) {\n                start = _startTokenId();\n            }\n            // Set `stop = min(stop, stopLimit)`.\n            if (stop > stopLimit) {\n                stop = stopLimit;\n            }\n            uint256 tokenIdsMaxLength = balanceOf(owner);\n            // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,\n            // to cater for cases where `balanceOf(owner)` is too big.\n            if (start < stop) {\n                uint256 rangeLength = stop - start;\n                if (rangeLength < tokenIdsMaxLength) {\n                    tokenIdsMaxLength = rangeLength;\n                }\n            } else {\n                tokenIdsMaxLength = 0;\n            }\n            uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);\n            if (tokenIdsMaxLength == 0) {\n                return tokenIds;\n            }\n            // We need to call `explicitOwnershipOf(start)`,\n            // because the slot at `start` may not be initialized.\n            TokenOwnership memory ownership = explicitOwnershipOf(start);\n            address currOwnershipAddr;\n            // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.\n            // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.\n            if (!ownership.burned) {\n                currOwnershipAddr = ownership.addr;\n            }\n            for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {\n                ownership = _ownershipAt(i);\n                if (ownership.burned) {\n                    continue;\n                }\n                if (ownership.addr != address(0)) {\n                    currOwnershipAddr = ownership.addr;\n                }\n                if (currOwnershipAddr == owner) {\n                    tokenIds[tokenIdsIdx++] = i;\n                }\n            }\n            // Downsize the array to fit.\n            assembly {\n                mstore(tokenIds, tokenIdsIdx)\n            }\n            return tokenIds;\n        }\n    }\n\n    /**\n     * @dev Returns an array of token IDs owned by `owner`.\n     *\n     * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n     * It is meant to be called off-chain.\n     *\n     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n     * multiple smaller scans if the collection is large enough to cause\n     * an out-of-gas error (10K collections should be fine).\n     */\n    function tokensOfOwner(address owner) external view virtual override returns (uint256[] memory) {\n        unchecked {\n            uint256 tokenIdsIdx;\n            address currOwnershipAddr;\n            uint256 tokenIdsLength = balanceOf(owner);\n            uint256[] memory tokenIds = new uint256[](tokenIdsLength);\n            TokenOwnership memory ownership;\n            for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {\n                ownership = _ownershipAt(i);\n                if (ownership.burned) {\n                    continue;\n                }\n                if (ownership.addr != address(0)) {\n                    currOwnershipAddr = ownership.addr;\n                }\n                if (currOwnershipAddr == owner) {\n                    tokenIds[tokenIdsIdx++] = i;\n                }\n            }\n            return tokenIds;\n        }\n    }\n}\n"},"src/constants/Constants.sol":{"content":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.13;\n\naddress constant SEAPORT = 0x0000000000000068F116a894984e2DB1123eB395;\n\nstring constant FLOW_EVM_TESTNET_RPC_URL = \"https://testnet.evm.nodes.onflow.org\";\n"},"src/structs/Structs.sol":{"content":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.13;\n\nstruct Permit {\n    uint256 deadline;\n    uint8 v;\n    bytes32 r;\n    bytes32 s;\n}\n\nstruct Permit2Permit {\n    uint256 nonce;\n    uint256 deadline;\n    bytes signature;\n}\n\nstruct ClawMachineDeposit {\n    uint48 tokenId;\n    uint128 swapValue;\n    uint40 timestamp;\n}\n\nstruct Discount {\n    uint256 amount;\n    uint256 nonce;\n    // Opaque 32-byte reference to the off-chain DB row that issued\n    // this discount. Off-chain: bytes32(uint256(Discount.id)). Lets\n    // /discount-consume look up the exact row by primary key instead\n    // of scanning by nonce. Included in the EIP-712 typed-data hash\n    // for V2 routers; V1 routers ignore this field at signature\n    // verification (their TYPEHASH doesn't include it).\n    bytes32 discountRef;\n    bytes signature;\n}\n\nstruct PermitWithAmount {\n    uint256 amount;\n    uint256 deadline;\n    uint8 v;\n    bytes32 r;\n    bytes32 s;\n}\n\nstruct DBObject {\n    uint128 startToken;\n    uint128 numTokens;\n    string provenanceURI;\n}\n\nstruct Drop {\n    uint48[] tokenIds;\n    uint256 price;\n    uint40 saleStartTime;\n    uint40 saleEndTime; //aka reveal time\n    uint40 revealStartTime; //\n    uint40 revealEndTime;\n    // after this period, reveals are open for everybody permisssionless\n    uint40 buybackEndOrFinalizationTimestamp;\n    uint16 maxPurchasesPerWallet;\n    bool swapEnabled;\n    uint24 minSellOutTokens;\n    uint24 tokensSold;\n    uint24 totalSupplyReserved;\n    bytes32 breakdownRoot; //tempId,salt,tokenId\n    address payoutWallet;\n    uint16 commissionNumerator; //Out of 10_000\n    bool payoutDistributedToTeamOnSuccesfulDrop;\n    address validator;\n    address paymentToken;\n    bytes32 additionalData; // optional; used for validation\n}\n\nstruct WrappedOwnership {\n    address owner;\n    bool isClaimed;\n}\n\nenum RandomnessFulfillmentRequestStatus {\n    NOT_REQUESTED,\n    REQUESTED,\n    COMPLETED\n}\n\nstruct RandomnessFulfillment {\n    RandomnessFulfillmentRequestStatus fulfilled;\n    uint248 randomness;\n}\n\nstruct AmountRaised {\n    uint128 totalRaised;\n    uint128 totalPaidOut;\n}\n\nstruct UserDropStats {\n    uint128 numPurchased;\n    uint128 balanceInDrop;\n}\n\nstruct WrappedTokenExtraData {\n    uint48 dropId;\n    CommitStatus status;\n}\n\nenum CommitStatus {\n    none,\n    committed\n}\n\nstruct Ownership {\n    address owner;\n    uint96 tokenId;\n}\n\nstruct MatchBidsBidComponent {\n    address bidder;\n    /// @dev The address that should receive the NFT once the bid is fulfilled.\n    ///      When set to address(0), defaults to `bidder` for backwards-compatible behavior.\n    address recipient;\n    uint256 bidSalt;\n    uint256 bidExpiration;\n    bytes bidSignature;\n}\n"},"src/interfaces/ICreatorToken.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.4;\n\ninterface ICreatorToken {\n    event TransferValidatorUpdated(address oldValidator, address newValidator);\n\n    function getTransferValidator() external view returns (address validator);\n    function setTransferValidator(address validator) external;\n    function getTransferValidationFunction() external view returns (bytes4 functionSignature, bool isViewFunction);\n}\n"},"src/interfaces/ITransferValidator.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.4;\n\ninterface ITransferValidator {\n    function applyCollectionTransferPolicy(address caller, address from, address to) external view;\n    function validateTransfer(address caller, address from, address to) external view;\n    function validateTransfer(address caller, address from, address to, uint256 tokenId) external view;\n    function validateTransfer(address caller, address from, address to, uint256 tokenId, uint256 amount) external;\n\n    function beforeAuthorizedTransfer(address operator, address token, uint256 tokenId) external;\n    function afterAuthorizedTransfer(address token, uint256 tokenId) external;\n    function beforeAuthorizedTransfer(address operator, address token) external;\n    function afterAuthorizedTransfer(address token) external;\n    function beforeAuthorizedTransfer(address token, uint256 tokenId) external;\n    function beforeAuthorizedTransferWithAmount(address token, uint256 tokenId, uint256 amount) external;\n    function afterAuthorizedTransferWithAmount(address token, uint256 tokenId) external;\n}\n"},"src/interfaces/permit2/IPermit2.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {ISignatureTransfer} from \"./ISignatureTransfer.sol\";\nimport {IAllowanceTransfer} from \"./IAllowanceTransfer.sol\";\n\n/// @notice Permit2 handles signature-based transfers in SignatureTransfer and allowance-based transfers in AllowanceTransfer.\n/// @dev Users must approve Permit2 before calling any of the transfer functions.\ninterface IPermit2 is ISignatureTransfer, IAllowanceTransfer {\n    // IPermit2 unifies the two interfaces so users have maximal flexibility with their approval.\n\n    }\n"},"src/BeezieLocator.sol":{"content":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.24;\n\n// OpenZeppelin Contracts\nimport {Initializable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol\";\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport {AccessControlUpgradeable} from \"@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol\";\nimport {ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol\";\nimport {ERC2771ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/metatx/ERC2771ContextUpgradeable.sol\";\n\n// Contracts\nimport {BeezieCollectiblesV2} from \"@/BeezieCollectiblesV2.sol\";\n\n/**\n * @title BeezieLocator\n * @notice Central registry contract that holds ownership of the protocol and manages addresses of main contracts\n */\ncontract BeezieLocator is Initializable, UUPSUpgradeable, AccessControlUpgradeable, ERC2771ContextUpgradeable {\n    //----------------------------------\n    // Roles\n    //----------------------------------\n\n    /// @dev Role that can update contract addresses\n    bytes32 public constant MAINTAINER_ROLE = keccak256(\"MAINTAINER_ROLE\");\n\n    /// @dev Role that can call setBlacklisted / setBlacklistedWithSig on BeezieCollectiblesV2\n    bytes32 public constant BLACKLIST_MANAGER_ROLE = keccak256(\"BLACKLIST_MANAGER_ROLE\");\n\n    //----------------------------------\n    // Errors\n    //----------------------------------\n    error AdminCannotBeRevoked();\n    error AdminCannotBeRenounced();\n    error NotRoleAdmin();\n    error NotAdminOrMaintainer();\n\n    //----------------------------------\n    // Events\n    //----------------------------------\n\n    event OwnerUpdated(address indexed oldAddress, address indexed newAddress);\n    event CollectiblesRegistryUpdated(address indexed oldAddress, address indexed newAddress);\n    event ClawMachineFactoryUpdated(address indexed oldAddress, address indexed newAddress);\n    event ClawMachineRouterUpdated(address indexed oldAddress, address indexed newAddress);\n    event BidRouterUpdated(address indexed oldAddress, address indexed newAddress);\n    event OpenseaVoucherUpdated(address indexed oldAddress, address indexed newAddress);\n    event SeaportProxyUpdated(address indexed oldAddress, address indexed newAddress);\n    event GasliteDropUpdated(address indexed oldAddress, address indexed newAddress);\n    event GelatoVRFOperatorUpdated(address indexed oldAddress, address indexed newAddress);\n    event TrustedForwarderUpdated(address indexed forwarder, bool indexed isTrusted);\n    event BeezieProofOfPlayUpdated(address indexed oldAddress, address indexed newAddress);\n    event BeezieVRFConsumerUpdated(address indexed oldAddress, address indexed newAddress);\n    event BlacklistUpdated(address indexed user, bool blocked);\n\n    //----------------------------------\n    // Storage\n    //----------------------------------\n\n    address public owner;\n    address public collectiblesRegistry;\n    address public clawMachineFactory;\n    address public clawMachineRouter;\n    address public bidRouter;\n    address public openseaVoucher;\n    address public seaportProxy;\n    address public gasliteDrop;\n    address public gelatoVRFOperator;\n    address public BeezieProofOfPlay;\n\n    mapping(address => bool) private _isTrustedForwarder;\n\n    address public beezieVRFConsumer;\n\n    //----------------------------------\n    // Constructor\n    //----------------------------------\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor(address _trustedForwarder) ERC2771ContextUpgradeable(_trustedForwarder) {\n        _disableInitializers();\n    }\n\n    //----------------------------------\n    // Initializer\n    //----------------------------------\n\n    /**\n     * @notice Initialize the contract\n     * @param _admin The address that will have admin role and DEFAULT_ADMIN_ROLE\n     */\n    function initialize(address _admin) public initializer {\n        __AccessControl_init();\n\n        owner = _admin;\n\n        _grantRole(DEFAULT_ADMIN_ROLE, _admin);\n        _grantRole(MAINTAINER_ROLE, _admin);\n    }\n\n    //----------------------------------\n    // Getters\n    //----------------------------------\n\n    /**\n     * @notice Check if an address has the MAINTAINER_ROLE\n     * @param _address The address to check\n     * @return True if the address has the MAINTAINER_ROLE, false otherwise\n     */\n    function isMaintainer(address _address) external view returns (bool) {\n        return hasRole(MAINTAINER_ROLE, _address);\n    }\n\n    /**\n     * @notice Check if an address has the BLACKLIST_MANAGER_ROLE\n     * @param _address The address to check\n     * @return True if the address has the BLACKLIST_MANAGER_ROLE, false otherwise\n     */\n    function isBlacklistManager(address _address) external view returns (bool) {\n        return hasRole(BLACKLIST_MANAGER_ROLE, _address);\n    }\n\n    /**\n     * @notice Check if an address has the DEFAULT_ADMIN_ROLE\n     * @param _address The address to check\n     * @return True if the address has the DEFAULT_ADMIN_ROLE, false otherwise\n     */\n    function isAdmin(address _address) external view returns (bool) {\n        return hasRole(DEFAULT_ADMIN_ROLE, _address);\n    }\n\n    /**\n     * @notice Check if an address is authorized\n     * @param _address The address to check\n     * @return True if the address is authorized, false otherwise\n     */\n    function isAuthorized(address _address) external view returns (bool) {\n        return hasRole(MAINTAINER_ROLE, _address) || hasRole(DEFAULT_ADMIN_ROLE, _address);\n    }\n\n    /**\n     * @notice Get the collectibles approval required contracts\n     * @return _bidRouter The bid router address\n     * @return _clawMachineFactory The claw machine factory address\n     */\n    function getCollectiblesApprovalRequiredContracts()\n        external\n        view\n        returns (address _bidRouter, address _clawMachineFactory)\n    {\n        return (bidRouter, clawMachineFactory);\n    }\n\n    /**\n     * @notice Check if an address is a trusted forwarder\n     * @param forwarder The forwarder address\n     * @return True if the address is a trusted forwarder, false otherwise\n     */\n    function isTrustedForwarder(address forwarder) public view override returns (bool) {\n        return super.isTrustedForwarder(forwarder) || _isTrustedForwarder[forwarder];\n    }\n\n    /**\n     * @notice Check if a wallet is blocked\n     * @param user The wallet address to check\n     * @return True if the wallet is blocked\n     */\n    function isBlacklisted(address user) external view returns (bool) {\n        return BeezieCollectiblesV2(collectiblesRegistry).isBlacklisted(user);\n    }\n\n    //----------------------------------\n    // Setters\n    //----------------------------------\n\n    /**\n     * @notice Grant a role to an address\n     * @param role The role to grant\n     * @param account The address to grant the role to\n     */\n    function grantRole(bytes32 role, address account) public override {\n        if (role == BLACKLIST_MANAGER_ROLE) {\n            require(\n                hasRole(DEFAULT_ADMIN_ROLE, _msgSender()) || hasRole(MAINTAINER_ROLE, _msgSender()),\n                NotAdminOrMaintainer()\n            );\n        } else {\n            require(hasRole(getRoleAdmin(role), _msgSender()), NotRoleAdmin());\n        }\n        if (role == DEFAULT_ADMIN_ROLE) {\n            _revokeRole(DEFAULT_ADMIN_ROLE, owner);\n            owner = account;\n        }\n        _grantRole(role, account);\n    }\n\n    /**\n     * @notice Revoke a role from an address\n     * @param _role The role to revoke\n     * @param _account The address to revoke the role from\n     */\n    function revokeRole(bytes32 _role, address _account) public override {\n        if (_role == BLACKLIST_MANAGER_ROLE) {\n            require(\n                hasRole(DEFAULT_ADMIN_ROLE, _msgSender()) || hasRole(MAINTAINER_ROLE, _msgSender()),\n                NotAdminOrMaintainer()\n            );\n        } else {\n            require(hasRole(getRoleAdmin(_role), _msgSender()), NotRoleAdmin());\n        }\n        if (_role == DEFAULT_ADMIN_ROLE) {\n            revert AdminCannotBeRevoked();\n        }\n        _revokeRole(_role, _account);\n    }\n\n    /**\n     * @notice Renounce a role from the calling account\n     * @param _role The role to renounce\n     * @param _callerConfirmation The address to renounce the role from\n     */\n    function renounceRole(bytes32 _role, address _callerConfirmation) public override {\n        if (_role == DEFAULT_ADMIN_ROLE) {\n            // Admin is only one, cannot renounce himself\n            revert AdminCannotBeRenounced();\n        }\n\n        if (_callerConfirmation != _msgSender()) {\n            revert AccessControlBadConfirmation();\n        }\n        _revokeRole(_role, _callerConfirmation);\n    }\n\n    /**\n     * @notice Set the owner address\n     * @param _owner The new owner address\n     */\n    function setOwner(address _owner) external onlyRole(DEFAULT_ADMIN_ROLE) {\n        address oldOwner = owner;\n        grantRole(DEFAULT_ADMIN_ROLE, _owner);\n        emit OwnerUpdated(oldOwner, _owner);\n    }\n\n    /**\n     * @notice Set the collectibles registry address\n     * @param _collectiblesRegistry The new collectibles registry address\n     */\n    function setCollectiblesRegistry(address _collectiblesRegistry) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = collectiblesRegistry;\n        collectiblesRegistry = _collectiblesRegistry;\n        emit CollectiblesRegistryUpdated(oldAddress, _collectiblesRegistry);\n    }\n\n    /**\n     * @notice Set the claw machine factory address\n     * @param _clawMachineFactory The new claw machine factory address\n     */\n    function setClawMachineFactory(address _clawMachineFactory) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = clawMachineFactory;\n        clawMachineFactory = _clawMachineFactory;\n        emit ClawMachineFactoryUpdated(oldAddress, _clawMachineFactory);\n    }\n\n    /**\n     * @notice Set the claw machine router address\n     * @param _clawMachineRouter The new claw machine router address\n     */\n    function setClawMachineRouter(address _clawMachineRouter) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = clawMachineRouter;\n        clawMachineRouter = _clawMachineRouter;\n        emit ClawMachineRouterUpdated(oldAddress, _clawMachineRouter);\n    }\n\n    /**\n     * @notice Set the bid router address\n     * @param _bidRouter The new bid router address\n     */\n    function setBidRouter(address _bidRouter) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = bidRouter;\n        bidRouter = _bidRouter;\n        emit BidRouterUpdated(oldAddress, _bidRouter);\n    }\n\n    /**\n     * @notice Set the OpenSea voucher address\n     * @param _openseaVoucher The new OpenSea voucher address\n     */\n    function setOpenseaVoucher(address _openseaVoucher) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = openseaVoucher;\n        openseaVoucher = _openseaVoucher;\n        emit OpenseaVoucherUpdated(oldAddress, _openseaVoucher);\n    }\n\n    /**\n     * @notice Set the Seaport proxy address\n     * @param _seaportProxy The new Seaport proxy address\n     */\n    function setSeaportProxy(address _seaportProxy) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = seaportProxy;\n        seaportProxy = _seaportProxy;\n        emit SeaportProxyUpdated(oldAddress, _seaportProxy);\n    }\n\n    /**\n     * @notice Set the Gaslite drop address\n     * @param _gasliteDrop The new Gaslite drop address\n     */\n    function setGasliteDrop(address _gasliteDrop) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = gasliteDrop;\n        gasliteDrop = _gasliteDrop;\n        emit GasliteDropUpdated(oldAddress, _gasliteDrop);\n    }\n\n    /**\n     * @notice Set the Gelato VRF operator\n     * @param _gelatoVRFOperator The new Gelato VRF operator\n     */\n    function setGelatoVRFOperator(address _gelatoVRFOperator) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = gelatoVRFOperator;\n        gelatoVRFOperator = _gelatoVRFOperator;\n        emit GelatoVRFOperatorUpdated(oldAddress, _gelatoVRFOperator);\n    }\n\n    /**\n     * @notice Set a trusted forwarder\n     * @param forwarder The forwarder address\n     * @param isTrusted Whether the forwarder is trusted\n     */\n    function setTrustedForwarder(address forwarder, bool isTrusted) external onlyRole(MAINTAINER_ROLE) {\n        _isTrustedForwarder[forwarder] = isTrusted;\n        emit TrustedForwarderUpdated(forwarder, isTrusted);\n    }\n\n    /**\n     * @notice Set the Beezue proof of play address\n     * @param _BeezieProofOfPlay The new Beezue proof of play address\n     */\n    function setBeezieProofOfPlay(address _BeezieProofOfPlay) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = BeezieProofOfPlay;\n        BeezieProofOfPlay = _BeezieProofOfPlay;\n        emit BeezieProofOfPlayUpdated(oldAddress, _BeezieProofOfPlay);\n    }\n\n    /**\n     * @notice Set the Beezie VRF consumer address\n     * @param _beezieVRFConsumer The new Beezie VRF consumer address\n     */\n    function setBeezieVRFConsumer(address _beezieVRFConsumer) external onlyRole(MAINTAINER_ROLE) {\n        address oldAddress = beezieVRFConsumer;\n        beezieVRFConsumer = _beezieVRFConsumer;\n        emit BeezieVRFConsumerUpdated(oldAddress, _beezieVRFConsumer);\n    }\n\n    //----------------------------------\n    // Internal\n    //----------------------------------\n    /**\n     * @notice Override the _msgSender function\n     * @return The sender address\n     */\n    function _msgSender() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (address) {\n        return ERC2771ContextUpgradeable._msgSender();\n    }\n\n    /**\n     * @notice Override the _msgData function\n     * @return The data\n     */\n    function _msgData() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (bytes calldata) {\n        return ERC2771ContextUpgradeable._msgData();\n    }\n\n    /**\n     * @notice Override the _contextSuffixLength function\n     * @return The context suffix length\n     */\n    function _contextSuffixLength()\n        internal\n        view\n        override(ContextUpgradeable, ERC2771ContextUpgradeable)\n        returns (uint256)\n    {\n        return ERC2771ContextUpgradeable._contextSuffixLength();\n    }\n\n    //----------------------------------\n    // Upgrade Authorization\n    //----------------------------------\n\n    /**\n     * @notice Authorize upgrade (only MAINTAINER_ROLE can upgrade)\n     * @param newImplementation The new implementation address\n     */\n    function _authorizeUpgrade(address newImplementation) internal override onlyRole(MAINTAINER_ROLE) {}\n}\n"},"src/BeezieClawMachineFactoryV2.sol":{"content":"// SPDX-License-Identifier: UNLICENSED\npragma solidity ^0.8.30;\n\n// OpenZeppelin Contracts\nimport {UUPSUpgradeable} from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport {OwnableUpgradeable} from \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport {AccessControlUpgradeable} from \"@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol\";\nimport {ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol\";\nimport {ERC2771ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/metatx/ERC2771ContextUpgradeable.sol\";\nimport {Clones} from \"@openzeppelin/contracts/proxy/Clones.sol\";\n\n// Core\nimport {BeezieClawMachineV2} from \"@/BeezieClawMachineV2.sol\";\nimport {BeezieLocator} from \"@/BeezieLocator.sol\";\n\n// Structs\nimport {PermitWithAmount} from \"@/structs/Structs.sol\";\n\n// Interfaces\nimport {ITransferValidator} from \"@/interfaces/ITransferValidator.sol\";\n\ncontract BeezieClawMachineFactoryV2 is UUPSUpgradeable, AccessControlUpgradeable, ERC2771ContextUpgradeable {\n    //----------------------------------\n    // Errors\n    //----------------------------------\n    error NotClawMachine();\n    error NotAuthorized();\n    error ClawFinanceWalletNotSet();\n    error InvalidClawFinanceWallet();\n\n    //----------------------------------\n    // Events\n    //----------------------------------\n    event ClawMachineCreated(address indexed clawMachine);\n    event ClawFinanceWalletUpdated(address indexed oldWallet, address indexed newWallet);\n\n    //----------------------------------\n    // Constants\n    //----------------------------------\n    bytes32 public constant CREATOR_ROLE = keccak256(\"CREATOR_ROLE\");\n    bytes32 public constant OPERATOR_ROLE = keccak256(\"OPERATOR_ROLE\");\n    bytes32 public constant OPEN_SEA_OPERATOR_ROLE = keccak256(\"OPEN_SEA_OPERATOR_ROLE\");\n    bytes32 public constant OPENSEA100_OPERATOR_ROLE = keccak256(\"OPENSEA100_OPERATOR_ROLE\");\n\n    //----------------------------------\n    // Storage\n    //----------------------------------\n    BeezieLocator public locator;\n    address public clawMachineImplementation;\n\n    mapping(address => bool) private _trustedForwarders;\n    mapping(address => bool) public isClawMachine;\n    address public clawFinanceWallet;\n\n    //----------------------------------\n    // Modifiers\n    //----------------------------------\n    modifier onlyClawMachine() {\n        require(isClawMachine[_msgSender()], NotClawMachine());\n        _;\n    }\n\n    modifier onlyAuthorized() {\n        require(locator.isAuthorized(_msgSender()), NotAuthorized());\n        _;\n    }\n\n    //----------------------------------\n    // Constructor\n    //----------------------------------\n    constructor(address trustedForwarder) ERC2771ContextUpgradeable(trustedForwarder) {\n        _disableInitializers();\n    }\n\n    //----------------------------------\n    // Initializer\n    //----------------------------------\n    function initialize(address _locator) public initializer {\n        __AccessControl_init();\n\n        locator = BeezieLocator(_locator);\n\n        _grantRole(DEFAULT_ADMIN_ROLE, locator.owner());\n    }\n\n    //----------------------------------\n    // Functions\n    //----------------------------------\n\n    /**\n     * @notice Create a new claw machine\n     * @param manager The manager of the claw machine\n     * @param swapToken The token to use for the claw machine\n     * @param initialPrice The initial price of the claw machine\n     * @param startTime The start time of the claw machine\n     * @param operatorRole The role of the operator\n     */\n    function createClawMachine(\n        address manager,\n        address swapToken,\n        uint128 initialPrice,\n        uint40 startTime,\n        bytes32 operatorRole\n    ) public onlyRole(CREATOR_ROLE) returns (address clawMachine) {\n        if (clawFinanceWallet == address(0)) revert ClawFinanceWalletNotSet();\n        clawMachine = Clones.clone(clawMachineImplementation);\n        BeezieClawMachineV2(clawMachine)\n            .initialize(\n                manager,\n                swapToken,\n                initialPrice,\n                startTime,\n                locator.gelatoVRFOperator(),\n                locator.beezieVRFConsumer()\n            );\n        isClawMachine[clawMachine] = true;\n        emit ClawMachineCreated(clawMachine);\n    }\n\n    /**\n     * @notice Set a trusted forwarder\n     * @param forwarder The forwarder to set\n     * @param isTrusted Whether the forwarder is trusted\n     */\n    function setTrustedForwarder(address forwarder, bool isTrusted) public onlyAuthorized {\n        _trustedForwarders[forwarder] = isTrusted;\n    }\n\n    /**\n     * @notice Check if a forwarder is trusted\n     * @param forwarder The forwarder to check\n     * @return True if the forwarder is trusted, false otherwise\n     */\n    function isTrustedForwarder(address forwarder) public view override returns (bool) {\n        return forwarder == trustedForwarder() || _trustedForwarders[forwarder];\n    }\n\n    /**\n     * @notice Set the claw machine implementation\n     * @param implementation The new claw machine implementation\n     */\n    function setImplementation(address implementation) public onlyAuthorized {\n        clawMachineImplementation = implementation;\n    }\n\n    /**\n     * @notice Set the global claw finance wallet that receives play revenue and funds swap offers\n     * @param newClawFinanceWallet The new claw finance wallet address\n     */\n    function setClawFinanceWallet(address newClawFinanceWallet) external onlyAuthorized {\n        if (newClawFinanceWallet == address(0)) revert InvalidClawFinanceWallet();\n        emit ClawFinanceWalletUpdated(clawFinanceWallet, newClawFinanceWallet);\n        clawFinanceWallet = newClawFinanceWallet;\n    }\n\n    /**\n     * @notice Before transfer hook\n     * @param token The token to transfer\n     */\n    function beforeTransfer(address token) public onlyClawMachine {\n        (bool success, bytes memory data) = token.staticcall(abi.encodeWithSelector(0x098144d4)); // getTransferValidator()\n        if (success) {\n            address transferValidator = abi.decode(data, (address));\n            if (transferValidator != address(0)) {\n                ITransferValidator(transferValidator).beforeAuthorizedTransfer(_msgSender(), token);\n            }\n        }\n    }\n\n    /**\n     * @notice After transfer hook\n     * @param token The token to transfer\n     */\n    function afterTransfer(address token) public onlyClawMachine {\n        (bool success, bytes memory data) = token.staticcall(abi.encodeWithSelector(0x098144d4)); // getTransferValidator()\n        if (success) {\n            address transferValidator = abi.decode(data, (address));\n            if (transferValidator != address(0)) {\n                ITransferValidator(transferValidator).afterAuthorizedTransfer(token);\n            }\n        }\n    }\n\n    function _authorizeUpgrade(address newImplementation) internal override onlyAuthorized {}\n\n    function _msgSender() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (address) {\n        return ERC2771ContextUpgradeable._msgSender();\n    }\n\n    function _msgData() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (bytes calldata) {\n        return ERC2771ContextUpgradeable._msgData();\n    }\n\n    function _contextSuffixLength()\n        internal\n        view\n        override(ContextUpgradeable, ERC2771ContextUpgradeable)\n        returns (uint256)\n    {\n        return ERC2771ContextUpgradeable._contextSuffixLength();\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS\n    }\n\n    /**\n     * @dev The signature derives the `address(0)`.\n     */\n    error ECDSAInvalidSignature();\n\n    /**\n     * @dev The signature has an invalid length.\n     */\n    error ECDSAInvalidSignatureLength(uint256 length);\n\n    /**\n     * @dev The signature has an S value that is in the upper half order.\n     */\n    error ECDSAInvalidSignatureS(bytes32 s);\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not\n     * return address(0) without also returning an error description. Errors are documented using an enum (error type)\n     * and a bytes32 providing additional information about the error.\n     *\n     * If no error is returned, then the address can be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     *\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes memory signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            assembly (\"memory-safe\") {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Variant of {tryRecover} that takes a signature in calldata\n     */\n    function tryRecoverCalldata(\n        bytes32 hash,\n        bytes calldata signature\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, calldata slices would work here, but are\n            // significantly more expensive (length check) than using calldataload in assembly.\n            assembly (\"memory-safe\") {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction\n     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash\n     * invalidation or nonces for replay protection.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Variant of {recover} that takes a signature in calldata\n     */\n    function recoverCalldata(bytes32 hash, bytes calldata signature) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecoverCalldata(hash, signature);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]\n     */\n    function tryRecover(\n        bytes32 hash,\n        bytes32 r,\n        bytes32 vs\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        unchecked {\n            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n            // We do not check for an overflow here since the shift operation results in 0 or 1.\n            uint8 v = uint8((uint256(vs) >> 255) + 27);\n            return tryRecover(hash, v, r, s);\n        }\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n     */\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function tryRecover(\n        bytes32 hash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS, s);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature, bytes32(0));\n        }\n\n        return (signer, RecoverError.NoError, bytes32(0));\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\n        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);\n        _throwError(error, errorArg);\n        return recovered;\n    }\n\n    /**\n     * @dev Parse a signature into its `v`, `r` and `s` components. Supports 65-byte and 64-byte (ERC-2098)\n     * formats. Returns (0,0,0) for invalid signatures.\n     *\n     * For 64-byte signatures, `v` is automatically normalized to 27 or 28.\n     * For 65-byte signatures, `v` is returned as-is and MUST already be 27 or 28 for use with ecrecover.\n     *\n     * Consider validating the result before use, or use {tryRecover}/{recover} which perform full validation.\n     */\n    function parse(bytes memory signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch mload(signature)\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := mload(add(signature, 0x40))\n                r := mload(add(signature, 0x20))\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Variant of {parse} that takes a signature in calldata\n     */\n    function parseCalldata(bytes calldata signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {\n        assembly (\"memory-safe\") {\n            // Check the signature length\n            switch signature.length\n            // - case 65: r,s,v signature (standard)\n            case 65 {\n                r := calldataload(signature.offset)\n                s := calldataload(add(signature.offset, 0x20))\n                v := byte(0, calldataload(add(signature.offset, 0x40)))\n            }\n            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)\n            case 64 {\n                let vs := calldataload(add(signature.offset, 0x20))\n                r := calldataload(signature.offset)\n                s := and(vs, shr(1, not(0)))\n                v := add(shr(255, vs), 27)\n            }\n            default {\n                r := 0\n                s := 0\n                v := 0\n            }\n        }\n    }\n\n    /**\n     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.\n     */\n    function _throwError(RecoverError error, bytes32 errorArg) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert ECDSAInvalidSignature();\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert ECDSAInvalidSignatureLength(uint256(errorArg));\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert ECDSAInvalidSignatureS(errorArg);\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC1271.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1271.sol)\n\npragma solidity >=0.5.0;\n\n/**\n * @dev Interface of the ERC-1271 standard signature validation method for\n * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].\n */\ninterface IERC1271 {\n    /**\n     * @dev Should return whether the signature provided is valid for the provided data\n     * @param hash      Hash of the data to be signed\n     * @param signature Signature byte array associated with `hash`\n     */\n    function isValidSignature(bytes32 hash, bytes calldata signature) external view returns (bytes4 magicValue);\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC7913.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC7913.sol)\n\npragma solidity >=0.5.0;\n\n/**\n * @dev Signature verifier interface.\n */\ninterface IERC7913SignatureVerifier {\n    /**\n     * @dev Verifies `signature` as a valid signature of `hash` by `key`.\n     *\n     * MUST return the bytes4 magic value IERC7913SignatureVerifier.verify.selector if the signature is valid.\n     * SHOULD return 0xffffffff or revert if the signature is not valid.\n     * SHOULD return 0xffffffff or revert if the key is empty\n     */\n    function verify(bytes calldata key, bytes32 hash, bytes calldata signature) external view returns (bytes4);\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Bytes.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Bytes.sol)\n\npragma solidity ^0.8.24;\n\nimport {Math} from \"./math/Math.sol\";\n\n/**\n * @dev Bytes operations.\n */\nlibrary Bytes {\n    /**\n     * @dev Forward search for `s` in `buffer`\n     * * If `s` is present in the buffer, returns the index of the first instance\n     * * If `s` is not present in the buffer, returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]\n     */\n    function indexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {\n        return indexOf(buffer, s, 0);\n    }\n\n    /**\n     * @dev Forward search for `s` in `buffer` starting at position `pos`\n     * * If `s` is present in the buffer (at or after `pos`), returns the index of the next instance\n     * * If `s` is not present in the buffer (at or after `pos`), returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]\n     */\n    function indexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {\n        uint256 length = buffer.length;\n        for (uint256 i = pos; i < length; ++i) {\n            if (bytes1(_unsafeReadBytesOffset(buffer, i)) == s) {\n                return i;\n            }\n        }\n        return type(uint256).max;\n    }\n\n    /**\n     * @dev Backward search for `s` in `buffer`\n     * * If `s` is present in the buffer, returns the index of the last instance\n     * * If `s` is not present in the buffer, returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]\n     */\n    function lastIndexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {\n        return lastIndexOf(buffer, s, type(uint256).max);\n    }\n\n    /**\n     * @dev Backward search for `s` in `buffer` starting at position `pos`\n     * * If `s` is present in the buffer (at or before `pos`), returns the index of the previous instance\n     * * If `s` is not present in the buffer (at or before `pos`), returns type(uint256).max\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]\n     */\n    function lastIndexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {\n        unchecked {\n            uint256 length = buffer.length;\n            for (uint256 i = Math.min(Math.saturatingAdd(pos, 1), length); i > 0; --i) {\n                if (bytes1(_unsafeReadBytesOffset(buffer, i - 1)) == s) {\n                    return i - 1;\n                }\n            }\n            return type(uint256).max;\n        }\n    }\n\n    /**\n     * @dev Copies the content of `buffer`, from `start` (included) to the end of `buffer` into a new bytes object in\n     * memory.\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]\n     */\n    function slice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {\n        return slice(buffer, start, buffer.length);\n    }\n\n    /**\n     * @dev Copies the content of `buffer`, from `start` (included) to `end` (excluded) into a new bytes object in\n     * memory. The `end` argument is truncated to the length of the `buffer`.\n     *\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]\n     */\n    function slice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {\n        // sanitize\n        end = Math.min(end, buffer.length);\n        start = Math.min(start, end);\n\n        // allocate and copy\n        bytes memory result = new bytes(end - start);\n        assembly (\"memory-safe\") {\n            mcopy(add(result, 0x20), add(add(buffer, 0x20), start), sub(end, start))\n        }\n\n        return result;\n    }\n\n    /**\n     * @dev Moves the content of `buffer`, from `start` (included) to the end of `buffer` to the start of that buffer.\n     *\n     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]\n     */\n    function splice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {\n        return splice(buffer, start, buffer.length);\n    }\n\n    /**\n     * @dev Moves the content of `buffer`, from `start` (included) to end (excluded) to the start of that buffer. The\n     * `end` argument is truncated to the length of the `buffer`.\n     *\n     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead\n     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]\n     */\n    function splice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {\n        // sanitize\n        end = Math.min(end, buffer.length);\n        start = Math.min(start, end);\n\n        // allocate and copy\n        assembly (\"memory-safe\") {\n            mcopy(add(buffer, 0x20), add(add(buffer, 0x20), start), sub(end, start))\n            mstore(buffer, sub(end, start))\n        }\n\n        return buffer;\n    }\n\n    /**\n     * @dev Concatenate an array of bytes into a single bytes object.\n     *\n     * For fixed bytes types, we recommend using the solidity built-in `bytes.concat` or (equivalent)\n     * `abi.encodePacked`.\n     *\n     * NOTE: this could be done in assembly with a single loop that expands starting at the FMP, but that would be\n     * significantly less readable. It might be worth benchmarking the savings of the full-assembly approach.\n     */\n    function concat(bytes[] memory buffers) internal pure returns (bytes memory) {\n        uint256 length = 0;\n        for (uint256 i = 0; i < buffers.length; ++i) {\n            length += buffers[i].length;\n        }\n\n        bytes memory result = new bytes(length);\n\n        uint256 offset = 0x20;\n        for (uint256 i = 0; i < buffers.length; ++i) {\n            bytes memory input = buffers[i];\n            assembly (\"memory-safe\") {\n                mcopy(add(result, offset), add(input, 0x20), mload(input))\n            }\n            unchecked {\n                offset += input.length;\n            }\n        }\n\n        return result;\n    }\n\n    /**\n     * @dev Returns true if the two byte buffers are equal.\n     */\n    function equal(bytes memory a, bytes memory b) internal pure returns (bool) {\n        return a.length == b.length && keccak256(a) == keccak256(b);\n    }\n\n    /**\n     * @dev Reverses the byte order of a bytes32 value, converting between little-endian and big-endian.\n     * Inspired by https://graphics.stanford.edu/~seander/bithacks.html#ReverseParallel[Reverse Parallel]\n     */\n    function reverseBytes32(bytes32 value) internal pure returns (bytes32) {\n        value = // swap bytes\n            ((value >> 8) & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) |\n            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) << 8);\n        value = // swap 2-byte long pairs\n            ((value >> 16) & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) |\n            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) << 16);\n        value = // swap 4-byte long pairs\n            ((value >> 32) & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) |\n            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) << 32);\n        value = // swap 8-byte long pairs\n            ((value >> 64) & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) |\n            ((value & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) << 64);\n        return (value >> 128) | (value << 128); // swap 16-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 128-bit values.\n    function reverseBytes16(bytes16 value) internal pure returns (bytes16) {\n        value = // swap bytes\n            ((value & 0xFF00FF00FF00FF00FF00FF00FF00FF00) >> 8) |\n            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF) << 8);\n        value = // swap 2-byte long pairs\n            ((value & 0xFFFF0000FFFF0000FFFF0000FFFF0000) >> 16) |\n            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF) << 16);\n        value = // swap 4-byte long pairs\n            ((value & 0xFFFFFFFF00000000FFFFFFFF00000000) >> 32) |\n            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF) << 32);\n        return (value >> 64) | (value << 64); // swap 8-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 64-bit values.\n    function reverseBytes8(bytes8 value) internal pure returns (bytes8) {\n        value = ((value & 0xFF00FF00FF00FF00) >> 8) | ((value & 0x00FF00FF00FF00FF) << 8); // swap bytes\n        value = ((value & 0xFFFF0000FFFF0000) >> 16) | ((value & 0x0000FFFF0000FFFF) << 16); // swap 2-byte long pairs\n        return (value >> 32) | (value << 32); // swap 4-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 32-bit values.\n    function reverseBytes4(bytes4 value) internal pure returns (bytes4) {\n        value = ((value & 0xFF00FF00) >> 8) | ((value & 0x00FF00FF) << 8); // swap bytes\n        return (value >> 16) | (value << 16); // swap 2-byte long pairs\n    }\n\n    /// @dev Same as {reverseBytes32} but optimized for 16-bit values.\n    function reverseBytes2(bytes2 value) internal pure returns (bytes2) {\n        return (value >> 8) | (value << 8);\n    }\n\n    /**\n     * @dev Counts the number of leading zero bits a bytes array. Returns `8 * buffer.length`\n     * if the buffer is all zeros.\n     */\n    function clz(bytes memory buffer) internal pure returns (uint256) {\n        for (uint256 i = 0; i < buffer.length; i += 0x20) {\n            bytes32 chunk = _unsafeReadBytesOffset(buffer, i);\n            if (chunk != bytes32(0)) {\n                return Math.min(8 * i + Math.clz(uint256(chunk)), 8 * buffer.length);\n            }\n        }\n        return 8 * buffer.length;\n    }\n\n    /**\n     * @dev Reads a bytes32 from a bytes array without bounds checking.\n     *\n     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the\n     * assembly block as such would prevent some optimizations.\n     */\n    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {\n        // This is not memory safe in the general case, but all calls to this private function are within bounds.\n        assembly (\"memory-safe\") {\n            value := mload(add(add(buffer, 0x20), offset))\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/proxy/utils/Initializable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.3.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Storage of the initializable contract.\n     *\n     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions\n     * when using with upgradeable contracts.\n     *\n     * @custom:storage-location erc7201:openzeppelin.storage.Initializable\n     */\n    struct InitializableStorage {\n        /**\n         * @dev Indicates that the contract has been initialized.\n         */\n        uint64 _initialized;\n        /**\n         * @dev Indicates that the contract is in the process of being initialized.\n         */\n        bool _initializing;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Initializable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;\n\n    /**\n     * @dev The contract is already initialized.\n     */\n    error InvalidInitialization();\n\n    /**\n     * @dev The contract is not initializing.\n     */\n    error NotInitializing();\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint64 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any\n     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in\n     * production.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        // Cache values to avoid duplicated sloads\n        bool isTopLevelCall = !$._initializing;\n        uint64 initialized = $._initialized;\n\n        // Allowed calls:\n        // - initialSetup: the contract is not in the initializing state and no previous version was\n        //                 initialized\n        // - construction: the contract is initialized at version 1 (no reinitialization) and the\n        //                 current contract is just being deployed\n        bool initialSetup = initialized == 0 && isTopLevelCall;\n        bool construction = initialized == 1 && address(this).code.length == 0;\n\n        if (!initialSetup && !construction) {\n            revert InvalidInitialization();\n        }\n        $._initialized = 1;\n        if (isTopLevelCall) {\n            $._initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            $._initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint64 version) {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing || $._initialized >= version) {\n            revert InvalidInitialization();\n        }\n        $._initialized = version;\n        $._initializing = true;\n        _;\n        $._initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        _checkInitializing();\n        _;\n    }\n\n    /**\n     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.\n     */\n    function _checkInitializing() internal view virtual {\n        if (!_isInitializing()) {\n            revert NotInitializing();\n        }\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        // solhint-disable-next-line var-name-mixedcase\n        InitializableStorage storage $ = _getInitializableStorage();\n\n        if ($._initializing) {\n            revert InvalidInitialization();\n        }\n        if ($._initialized != type(uint64).max) {\n            $._initialized = type(uint64).max;\n            emit Initialized(type(uint64).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint64) {\n        return _getInitializableStorage()._initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _getInitializableStorage()._initializing;\n    }\n\n    /**\n     * @dev Pointer to storage slot. Allows integrators to override it with a custom storage location.\n     *\n     * NOTE: Consider following the ERC-7201 formula to derive storage locations.\n     */\n    function _initializableStorageSlot() internal pure virtual returns (bytes32) {\n        return INITIALIZABLE_STORAGE;\n    }\n\n    /**\n     * @dev Returns a pointer to the storage namespace.\n     */\n    // solhint-disable-next-line var-name-mixedcase\n    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {\n        bytes32 slot = _initializableStorageSlot();\n        assembly {\n            $.slot := slot\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/proxy/utils/UUPSUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.22;\n\nimport {IERC1822Proxiable} from \"../../interfaces/draft-IERC1822.sol\";\nimport {ERC1967Utils} from \"../ERC1967/ERC1967Utils.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n *\n * @custom:stateless\n */\nabstract contract UUPSUpgradeable is IERC1822Proxiable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable\n    address private immutable __self = address(this);\n\n    /**\n     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`\n     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,\n     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.\n     * If the getter returns `\"5.0.0\"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must\n     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function\n     * during an upgrade.\n     */\n    string public constant UPGRADE_INTERFACE_VERSION = \"5.0.0\";\n\n    /**\n     * @dev The call is from an unauthorized context.\n     */\n    error UUPSUnauthorizedCallContext();\n\n    /**\n     * @dev The storage `slot` is unsupported as a UUID.\n     */\n    error UUPSUnsupportedProxiableUUID(bytes32 slot);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC-1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC-1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        _checkProxy();\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        _checkNotDelegated();\n        _;\n    }\n\n    /**\n     * @dev Implementation of the ERC-1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view notDelegated returns (bytes32) {\n        return ERC1967Utils.IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data);\n    }\n\n    /**\n     * @dev Reverts if the execution is not performed via delegatecall or the execution\n     * context is not of a proxy with an ERC-1967 compliant implementation pointing to self.\n     */\n    function _checkProxy() internal view virtual {\n        if (\n            address(this) == __self || // Must be called through delegatecall\n            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy\n        ) {\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Reverts if the execution is performed via delegatecall.\n     * See {notDelegated}.\n     */\n    function _checkNotDelegated() internal view virtual {\n        if (address(this) != __self) {\n            // Must not be called through delegatecall\n            revert UUPSUnauthorizedCallContext();\n        }\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.\n     *\n     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value\n     * is expected to be the implementation slot in ERC-1967.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {\n        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {\n                revert UUPSUnsupportedProxiableUUID(slot);\n            }\n            ERC1967Utils.upgradeToAndCall(newImplementation, data);\n        } catch {\n            // The implementation is not UUPS\n            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/utils/ContextUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC2981.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC2981.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     *\n     * NOTE: ERC-2981 allows setting the royalty to 100% of the price. In that case all the price would be sent to the\n     * royalty receiver and 0 tokens to the seller. Contracts dealing with royalty should consider empty transfers.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/introspection/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/utils/introspection/ERC165Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165 {\n    function __ERC165_init() internal onlyInitializing {\n    }\n\n    function __ERC165_init_unchained() internal onlyInitializing {\n    }\n    /// @inheritdoc IERC165\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/math/Math.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\nimport {Panic} from \"../Panic.sol\";\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Return the 512-bit addition of two uint256.\n     *\n     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.\n     */\n    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        assembly (\"memory-safe\") {\n            low := add(a, b)\n            high := lt(low, a)\n        }\n    }\n\n    /**\n     * @dev Return the 512-bit multiplication of two uint256.\n     *\n     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.\n     */\n    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {\n        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use\n        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n        // variables such that product = high * 2²⁵⁶ + low.\n        assembly (\"memory-safe\") {\n            let mm := mulmod(a, b, not(0))\n            low := mul(a, b)\n            high := sub(sub(mm, low), lt(mm, low))\n        }\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a + b;\n            success = c >= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a - b;\n            success = c <= a;\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a * b;\n            assembly (\"memory-safe\") {\n                // Only true when the multiplication doesn't overflow\n                // (c / a == b) || (a == 0)\n                success := or(eq(div(c, a), b), iszero(a))\n            }\n            // equivalent to: success ? c : 0\n            result = c * SafeCast.toUint(success);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `DIV` opcode returns zero when the denominator is 0.\n                result := div(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            success = b > 0;\n            assembly (\"memory-safe\") {\n                // The `MOD` opcode returns zero when the denominator is 0.\n                result := mod(a, b)\n            }\n        }\n    }\n\n    /**\n     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryAdd(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.\n     */\n    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {\n        (, uint256 result) = trySub(a, b);\n        return result;\n    }\n\n    /**\n     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.\n     */\n    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {\n        (bool success, uint256 result) = tryMul(a, b);\n        return ternary(success, result, type(uint256).max);\n    }\n\n    /**\n     * @dev Branchless ternary evaluation for `condition ? a : b`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `condition ? a : b`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * SafeCast.toUint(condition));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        unchecked {\n            // (a + b) / 2 can overflow.\n            return (a & b) + (a ^ b) / 2;\n        }\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n\n        // The following calculation ensures accurate ceiling division without overflow.\n        // Since a is non-zero, (a - 1) / b will not overflow.\n        // The largest possible result occurs when (a - 1) / b is type(uint256).max,\n        // but the largest value we can obtain is type(uint256).max - 1, which happens\n        // when a = type(uint256).max and b = 1.\n        unchecked {\n            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);\n        }\n    }\n\n    /**\n     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     *\n     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (high == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return low / denominator;\n            }\n\n            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.\n            if (denominator <= high) {\n                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [high low].\n            uint256 remainder;\n            assembly (\"memory-safe\") {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                high := sub(high, gt(remainder, low))\n                low := sub(low, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly (\"memory-safe\") {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [high low] by twos.\n                low := div(low, twos)\n\n                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from high into low.\n            low |= high * twos;\n\n            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such\n            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶\n            inverse *= 2 - denominator * inverse; // inverse mod 2³²\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is\n            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high\n            // is no longer required.\n            result = low * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);\n    }\n\n    /**\n     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {\n        unchecked {\n            (uint256 high, uint256 low) = mul512(x, y);\n            if (high >= 1 << n) {\n                Panic.panic(Panic.UNDER_OVERFLOW);\n            }\n            return (high << (256 - n)) | (low >> n);\n        }\n    }\n\n    /**\n     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.\n     */\n    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {\n        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);\n    }\n\n    /**\n     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.\n     *\n     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.\n     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.\n     *\n     * If the input value is not inversible, 0 is returned.\n     *\n     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the\n     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.\n     */\n    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {\n        unchecked {\n            if (n == 0) return 0;\n\n            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)\n            // Used to compute integers x and y such that: ax + ny = gcd(a, n).\n            // When the gcd is 1, then the inverse of a modulo n exists and it's x.\n            // ax + ny = 1\n            // ax = 1 + (-y)n\n            // ax ≡ 1 (mod n) # x is the inverse of a modulo n\n\n            // If the remainder is 0 the gcd is n right away.\n            uint256 remainder = a % n;\n            uint256 gcd = n;\n\n            // Therefore the initial coefficients are:\n            // ax + ny = gcd(a, n) = n\n            // 0a + 1n = n\n            int256 x = 0;\n            int256 y = 1;\n\n            while (remainder != 0) {\n                uint256 quotient = gcd / remainder;\n\n                (gcd, remainder) = (\n                    // The old remainder is the next gcd to try.\n                    remainder,\n                    // Compute the next remainder.\n                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd\n                    // where gcd is at most n (capped to type(uint256).max)\n                    gcd - remainder * quotient\n                );\n\n                (x, y) = (\n                    // Increment the coefficient of a.\n                    y,\n                    // Decrement the coefficient of n.\n                    // Can overflow, but the result is casted to uint256 so that the\n                    // next value of y is \"wrapped around\" to a value between 0 and n - 1.\n                    x - y * int256(quotient)\n                );\n            }\n\n            if (gcd != 1) return 0; // No inverse exists.\n            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.\n        }\n    }\n\n    /**\n     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.\n     *\n     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is\n     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that\n     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.\n     *\n     * NOTE: this function does NOT check that `p` is a prime greater than `2`.\n     */\n    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {\n        unchecked {\n            return Math.modExp(a, p - 2, p);\n        }\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)\n     *\n     * Requirements:\n     * - modulus can't be zero\n     * - underlying staticcall to precompile must succeed\n     *\n     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make\n     * sure the chain you're using it on supports the precompiled contract for modular exponentiation\n     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,\n     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly\n     * interpreted as 0.\n     */\n    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {\n        (bool success, uint256 result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).\n     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying\n     * to operate modulo 0 or if the underlying precompile reverted.\n     *\n     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain\n     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in\n     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack\n     * of a revert, but the result may be incorrectly interpreted as 0.\n     */\n    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {\n        if (m == 0) return (false, 0);\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            // | Offset    | Content    | Content (Hex)                                                      |\n            // |-----------|------------|--------------------------------------------------------------------|\n            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x60:0x7f | value of b | 0x<.............................................................b> |\n            // | 0x80:0x9f | value of e | 0x<.............................................................e> |\n            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |\n            mstore(ptr, 0x20)\n            mstore(add(ptr, 0x20), 0x20)\n            mstore(add(ptr, 0x40), 0x20)\n            mstore(add(ptr, 0x60), b)\n            mstore(add(ptr, 0x80), e)\n            mstore(add(ptr, 0xa0), m)\n\n            // Given the result < m, it's guaranteed to fit in 32 bytes,\n            // so we can use the memory scratch space located at offset 0.\n            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)\n            result := mload(0x00)\n        }\n    }\n\n    /**\n     * @dev Variant of {modExp} that supports inputs of arbitrary length.\n     */\n    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {\n        (bool success, bytes memory result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.\n     */\n    function tryModExp(\n        bytes memory b,\n        bytes memory e,\n        bytes memory m\n    ) internal view returns (bool success, bytes memory result) {\n        if (_zeroBytes(m)) return (false, new bytes(0));\n\n        uint256 mLen = m.length;\n\n        // Encode call args in result and move the free memory pointer\n        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);\n\n        assembly (\"memory-safe\") {\n            let dataPtr := add(result, 0x20)\n            // Write result on top of args to avoid allocating extra memory.\n            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)\n            // Overwrite the length.\n            // result.length > returndatasize() is guaranteed because returndatasize() == m.length\n            mstore(result, mLen)\n            // Set the memory pointer after the returned data.\n            mstore(0x40, add(dataPtr, mLen))\n        }\n    }\n\n    /**\n     * @dev Returns whether the provided byte array is zero.\n     */\n    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {\n        for (uint256 i = 0; i < byteArray.length; ++i) {\n            if (byteArray[i] != 0) {\n                return false;\n            }\n        }\n        return true;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only\n     * using integer operations.\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        unchecked {\n            // Take care of easy edge cases when a == 0 or a == 1\n            if (a <= 1) {\n                return a;\n            }\n\n            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a\n            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between\n            // the current value as `ε_n = | x_n - sqrt(a) |`.\n            //\n            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root\n            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is\n            // bigger than any uint256.\n            //\n            // By noticing that\n            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`\n            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar\n            // to the msb function.\n            uint256 aa = a;\n            uint256 xn = 1;\n\n            if (aa >= (1 << 128)) {\n                aa >>= 128;\n                xn <<= 64;\n            }\n            if (aa >= (1 << 64)) {\n                aa >>= 64;\n                xn <<= 32;\n            }\n            if (aa >= (1 << 32)) {\n                aa >>= 32;\n                xn <<= 16;\n            }\n            if (aa >= (1 << 16)) {\n                aa >>= 16;\n                xn <<= 8;\n            }\n            if (aa >= (1 << 8)) {\n                aa >>= 8;\n                xn <<= 4;\n            }\n            if (aa >= (1 << 4)) {\n                aa >>= 4;\n                xn <<= 2;\n            }\n            if (aa >= (1 << 2)) {\n                xn <<= 1;\n            }\n\n            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).\n            //\n            // We can refine our estimation by noticing that the middle of that interval minimizes the error.\n            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).\n            // This is going to be our x_0 (and ε_0)\n            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)\n\n            // From here, Newton's method give us:\n            // x_{n+1} = (x_n + a / x_n) / 2\n            //\n            // One should note that:\n            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a\n            //              = ((x_n² + a) / (2 * x_n))² - a\n            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a\n            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)\n            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)\n            //              = (x_n² - a)² / (2 * x_n)²\n            //              = ((x_n² - a) / (2 * x_n))²\n            //              ≥ 0\n            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n\n            //\n            // This gives us the proof of quadratic convergence of the sequence:\n            // ε_{n+1} = | x_{n+1} - sqrt(a) |\n            //         = | (x_n + a / x_n) / 2 - sqrt(a) |\n            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |\n            //         = | (x_n - sqrt(a))² / (2 * x_n) |\n            //         = | ε_n² / (2 * x_n) |\n            //         = ε_n² / | (2 * x_n) |\n            //\n            // For the first iteration, we have a special case where x_0 is known:\n            // ε_1 = ε_0² / | (2 * x_0) |\n            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))\n            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))\n            //     ≤ 2**(e-3) / 3\n            //     ≤ 2**(e-3-log2(3))\n            //     ≤ 2**(e-4.5)\n            //\n            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:\n            // ε_{n+1} = ε_n² / | (2 * x_n) |\n            //         ≤ (2**(e-k))² / (2 * 2**(e-1))\n            //         ≤ 2**(2*e-2*k) / 2**e\n            //         ≤ 2**(e-2*k)\n            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above\n            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5\n            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9\n            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18\n            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36\n            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72\n\n            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision\n            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either\n            // sqrt(a) or sqrt(a) + 1.\n            return xn - SafeCast.toUint(xn > a / xn);\n        }\n    }\n\n    /**\n     * @dev Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // If upper 8 bits of 16-bit half set, add 8 to result\n        r |= SafeCast.toUint((x >> r) > 0xff) << 3;\n        // If upper 4 bits of 8-bit half set, add 4 to result\n        r |= SafeCast.toUint((x >> r) > 0xf) << 2;\n\n        // Shifts value right by the current result and use it as an index into this lookup table:\n        //\n        // | x (4 bits) |  index  | table[index] = MSB position |\n        // |------------|---------|-----------------------------|\n        // |    0000    |    0    |        table[0] = 0         |\n        // |    0001    |    1    |        table[1] = 0         |\n        // |    0010    |    2    |        table[2] = 1         |\n        // |    0011    |    3    |        table[3] = 1         |\n        // |    0100    |    4    |        table[4] = 2         |\n        // |    0101    |    5    |        table[5] = 2         |\n        // |    0110    |    6    |        table[6] = 2         |\n        // |    0111    |    7    |        table[7] = 2         |\n        // |    1000    |    8    |        table[8] = 3         |\n        // |    1001    |    9    |        table[9] = 3         |\n        // |    1010    |   10    |        table[10] = 3        |\n        // |    1011    |   11    |        table[11] = 3        |\n        // |    1100    |   12    |        table[12] = 3        |\n        // |    1101    |   13    |        table[13] = 3        |\n        // |    1110    |   14    |        table[14] = 3        |\n        // |    1111    |   15    |        table[15] = 3        |\n        //\n        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.\n        assembly (\"memory-safe\") {\n            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 x) internal pure returns (uint256 r) {\n        // If value has upper 128 bits set, log2 result is at least 128\n        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;\n        // If upper 64 bits of 128-bit half set, add 64 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;\n        // If upper 32 bits of 64-bit half set, add 32 to result\n        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;\n        // If upper 16 bits of 32-bit half set, add 16 to result\n        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;\n        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8\n        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n\n    /**\n     * @dev Counts the number of leading zero bits in a uint256.\n     */\n    function clz(uint256 x) internal pure returns (uint256) {\n        return ternary(x == 0, 256, 255 - log2(x));\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/math/SafeCast.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n    /**\n     * @dev Value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n    /**\n     * @dev An int value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedIntToUint(int256 value);\n\n    /**\n     * @dev Value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n    /**\n     * @dev An uint value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedUintToInt(uint256 value);\n\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        if (value > type(uint248).max) {\n            revert SafeCastOverflowedUintDowncast(248, value);\n        }\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        if (value > type(uint240).max) {\n            revert SafeCastOverflowedUintDowncast(240, value);\n        }\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        if (value > type(uint232).max) {\n            revert SafeCastOverflowedUintDowncast(232, value);\n        }\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        if (value > type(uint224).max) {\n            revert SafeCastOverflowedUintDowncast(224, value);\n        }\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        if (value > type(uint216).max) {\n            revert SafeCastOverflowedUintDowncast(216, value);\n        }\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        if (value > type(uint208).max) {\n            revert SafeCastOverflowedUintDowncast(208, value);\n        }\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        if (value > type(uint200).max) {\n            revert SafeCastOverflowedUintDowncast(200, value);\n        }\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        if (value > type(uint192).max) {\n            revert SafeCastOverflowedUintDowncast(192, value);\n        }\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        if (value > type(uint184).max) {\n            revert SafeCastOverflowedUintDowncast(184, value);\n        }\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        if (value > type(uint176).max) {\n            revert SafeCastOverflowedUintDowncast(176, value);\n        }\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        if (value > type(uint168).max) {\n            revert SafeCastOverflowedUintDowncast(168, value);\n        }\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        if (value > type(uint160).max) {\n            revert SafeCastOverflowedUintDowncast(160, value);\n        }\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        if (value > type(uint152).max) {\n            revert SafeCastOverflowedUintDowncast(152, value);\n        }\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        if (value > type(uint144).max) {\n            revert SafeCastOverflowedUintDowncast(144, value);\n        }\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        if (value > type(uint136).max) {\n            revert SafeCastOverflowedUintDowncast(136, value);\n        }\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        if (value > type(uint128).max) {\n            revert SafeCastOverflowedUintDowncast(128, value);\n        }\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        if (value > type(uint120).max) {\n            revert SafeCastOverflowedUintDowncast(120, value);\n        }\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        if (value > type(uint112).max) {\n            revert SafeCastOverflowedUintDowncast(112, value);\n        }\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        if (value > type(uint104).max) {\n            revert SafeCastOverflowedUintDowncast(104, value);\n        }\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        if (value > type(uint96).max) {\n            revert SafeCastOverflowedUintDowncast(96, value);\n        }\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        if (value > type(uint88).max) {\n            revert SafeCastOverflowedUintDowncast(88, value);\n        }\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        if (value > type(uint80).max) {\n            revert SafeCastOverflowedUintDowncast(80, value);\n        }\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        if (value > type(uint72).max) {\n            revert SafeCastOverflowedUintDowncast(72, value);\n        }\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        if (value > type(uint64).max) {\n            revert SafeCastOverflowedUintDowncast(64, value);\n        }\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        if (value > type(uint56).max) {\n            revert SafeCastOverflowedUintDowncast(56, value);\n        }\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        if (value > type(uint48).max) {\n            revert SafeCastOverflowedUintDowncast(48, value);\n        }\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        if (value > type(uint40).max) {\n            revert SafeCastOverflowedUintDowncast(40, value);\n        }\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        if (value > type(uint32).max) {\n            revert SafeCastOverflowedUintDowncast(32, value);\n        }\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        if (value > type(uint24).max) {\n            revert SafeCastOverflowedUintDowncast(24, value);\n        }\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        if (value > type(uint16).max) {\n            revert SafeCastOverflowedUintDowncast(16, value);\n        }\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        if (value > type(uint8).max) {\n            revert SafeCastOverflowedUintDowncast(8, value);\n        }\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        if (value < 0) {\n            revert SafeCastOverflowedIntToUint(value);\n        }\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(248, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(240, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(232, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(224, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(216, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(208, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(200, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(192, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(184, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(176, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(168, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(160, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(152, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(144, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(136, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(128, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(120, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(112, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(104, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(96, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(88, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(80, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(72, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(64, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(56, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(48, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(40, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(32, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(24, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(16, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(8, value);\n        }\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        if (value > uint256(type(int256).max)) {\n            revert SafeCastOverflowedUintToInt(value);\n        }\n        return int256(value);\n    }\n\n    /**\n     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.\n     */\n    function toUint(bool b) internal pure returns (uint256 u) {\n        assembly (\"memory-safe\") {\n            u := iszero(iszero(b))\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/math/SignedMath.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.20;\n\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // Formula from the \"Bit Twiddling Hacks\" by Sean Eron Anderson.\n            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,\n            // taking advantage of the most significant (or \"sign\" bit) in two's complement representation.\n            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,\n            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).\n            int256 mask = n >> 255;\n\n            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.\n            return uint256((n + mask) ^ mask);\n        }\n    }\n}\n"},"lib/ERC721A-Upgradeable/contracts/extensions/IERC721AQueryableUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport '../IERC721AUpgradeable.sol';\n\n/**\n * @dev Interface of ERC721AQueryable.\n */\ninterface IERC721AQueryableUpgradeable is IERC721AUpgradeable {\n    /**\n     * Invalid query range (`start` >= `stop`).\n     */\n    error InvalidQueryRange();\n\n    /**\n     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.\n     *\n     * If the `tokenId` is out of bounds:\n     *\n     * - `addr = address(0)`\n     * - `startTimestamp = 0`\n     * - `burned = false`\n     * - `extraData = 0`\n     *\n     * If the `tokenId` is burned:\n     *\n     * - `addr = <Address of owner before token was burned>`\n     * - `startTimestamp = <Timestamp when token was burned>`\n     * - `burned = true`\n     * - `extraData = <Extra data when token was burned>`\n     *\n     * Otherwise:\n     *\n     * - `addr = <Address of owner>`\n     * - `startTimestamp = <Timestamp of start of ownership>`\n     * - `burned = false`\n     * - `extraData = <Extra data at start of ownership>`\n     */\n    function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);\n\n    /**\n     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.\n     * See {ERC721AQueryable-explicitOwnershipOf}\n     */\n    function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);\n\n    /**\n     * @dev Returns an array of token IDs owned by `owner`,\n     * in the range [`start`, `stop`)\n     * (i.e. `start <= tokenId < stop`).\n     *\n     * This function allows for tokens to be queried if the collection\n     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.\n     *\n     * Requirements:\n     *\n     * - `start < stop`\n     */\n    function tokensOfOwnerIn(\n        address owner,\n        uint256 start,\n        uint256 stop\n    ) external view returns (uint256[] memory);\n\n    /**\n     * @dev Returns an array of token IDs owned by `owner`.\n     *\n     * This function scans the ownership mapping and is O(`totalSupply`) in complexity.\n     * It is meant to be called off-chain.\n     *\n     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into\n     * multiple smaller scans if the collection is large enough to cause\n     * an out-of-gas error (10K collections should be fine).\n     */\n    function tokensOfOwner(address owner) external view returns (uint256[] memory);\n}\n"},"lib/ERC721A-Upgradeable/contracts/ERC721AUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721AUpgradeable.sol';\nimport {ERC721AStorage} from './ERC721AStorage.sol';\nimport './ERC721A__Initializable.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721ReceiverUpgradeable {\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721AUpgradeable is ERC721A__Initializable, IERC721AUpgradeable {\n    using ERC721AStorage for ERC721AStorage.Layout;\n\n    // =============================================================\n    //                           CONSTANTS\n    // =============================================================\n\n    // Mask of an entry in packed address data.\n    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n    // The bit position of `numberMinted` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n    // The bit position of `numberBurned` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n    // The bit position of `aux` in packed address data.\n    uint256 private constant _BITPOS_AUX = 192;\n\n    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n    // The bit position of `startTimestamp` in packed ownership.\n    uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n    // The bit mask of the `burned` bit in packed ownership.\n    uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n    // The bit position of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n    // The bit mask of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n    // The bit position of `extraData` in packed ownership.\n    uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n    // The mask of the lower 160 bits for addresses.\n    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n    // The maximum `quantity` that can be minted with {_mintERC2309}.\n    // This limit is to prevent overflows on the address data entries.\n    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n    // is required to cause an overflow, which is unrealistic.\n    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n    // The `Transfer` event signature is given by:\n    // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n    // =============================================================\n    //                          CONSTRUCTOR\n    // =============================================================\n\n    function __ERC721A_init(string memory name_, string memory symbol_) internal onlyInitializingERC721A {\n        __ERC721A_init_unchained(name_, symbol_);\n    }\n\n    function __ERC721A_init_unchained(string memory name_, string memory symbol_) internal onlyInitializingERC721A {\n        ERC721AStorage.layout()._name = name_;\n        ERC721AStorage.layout()._symbol = symbol_;\n        ERC721AStorage.layout()._currentIndex = _startTokenId();\n    }\n\n    // =============================================================\n    //                   TOKEN COUNTING OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the starting token ID.\n     * To change the starting token ID, please override this function.\n     */\n    function _startTokenId() internal view virtual returns (uint256) {\n        return 0;\n    }\n\n    /**\n     * @dev Returns the next token ID to be minted.\n     */\n    function _nextTokenId() internal view virtual returns (uint256) {\n        return ERC721AStorage.layout()._currentIndex;\n    }\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() public view virtual override returns (uint256) {\n        // Counter underflow is impossible as _burnCounter cannot be incremented\n        // more than `_currentIndex - _startTokenId()` times.\n        unchecked {\n            return ERC721AStorage.layout()._currentIndex - ERC721AStorage.layout()._burnCounter - _startTokenId();\n        }\n    }\n\n    /**\n     * @dev Returns the total amount of tokens minted in the contract.\n     */\n    function _totalMinted() internal view virtual returns (uint256) {\n        // Counter underflow is impossible as `_currentIndex` does not decrement,\n        // and it is initialized to `_startTokenId()`.\n        unchecked {\n            return ERC721AStorage.layout()._currentIndex - _startTokenId();\n        }\n    }\n\n    /**\n     * @dev Returns the total number of tokens burned.\n     */\n    function _totalBurned() internal view virtual returns (uint256) {\n        return ERC721AStorage.layout()._burnCounter;\n    }\n\n    // =============================================================\n    //                    ADDRESS DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) public view virtual override returns (uint256) {\n        if (owner == address(0)) revert BalanceQueryForZeroAddress();\n        return ERC721AStorage.layout()._packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens minted by `owner`.\n     */\n    function _numberMinted(address owner) internal view returns (uint256) {\n        return\n            (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens burned by or on behalf of `owner`.\n     */\n    function _numberBurned(address owner) internal view returns (uint256) {\n        return\n            (ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     */\n    function _getAux(address owner) internal view returns (uint64) {\n        return uint64(ERC721AStorage.layout()._packedAddressData[owner] >> _BITPOS_AUX);\n    }\n\n    /**\n     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     * If there are multiple variables, please pack them into a uint64.\n     */\n    function _setAux(address owner, uint64 aux) internal virtual {\n        uint256 packed = ERC721AStorage.layout()._packedAddressData[owner];\n        uint256 auxCasted;\n        // Cast `aux` with assembly to avoid redundant masking.\n        assembly {\n            auxCasted := aux\n        }\n        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n        ERC721AStorage.layout()._packedAddressData[owner] = packed;\n    }\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        // The interface IDs are constants representing the first 4 bytes\n        // of the XOR of all function selectors in the interface.\n        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n        return\n            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n    }\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() public view virtual override returns (string memory) {\n        return ERC721AStorage.layout()._name;\n    }\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() public view virtual override returns (string memory) {\n        return ERC721AStorage.layout()._symbol;\n    }\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, it can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return '';\n    }\n\n    // =============================================================\n    //                     OWNERSHIPS OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n        return address(uint160(_packedOwnershipOf(tokenId)));\n    }\n\n    /**\n     * @dev Gas spent here starts off proportional to the maximum mint batch size.\n     * It gradually moves to O(1) as tokens get transferred around over time.\n     */\n    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(_packedOwnershipOf(tokenId));\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n     */\n    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(ERC721AStorage.layout()._packedOwnerships[index]);\n    }\n\n    /**\n     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n     */\n    function _initializeOwnershipAt(uint256 index) internal virtual {\n        if (ERC721AStorage.layout()._packedOwnerships[index] == 0) {\n            ERC721AStorage.layout()._packedOwnerships[index] = _packedOwnershipOf(index);\n        }\n    }\n\n    /**\n     * Returns the packed ownership data of `tokenId`.\n     */\n    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {\n        if (_startTokenId() <= tokenId) {\n            packed = ERC721AStorage.layout()._packedOwnerships[tokenId];\n            // If not burned.\n            if (packed & _BITMASK_BURNED == 0) {\n                // If the data at the starting slot does not exist, start the scan.\n                if (packed == 0) {\n                    if (tokenId >= ERC721AStorage.layout()._currentIndex) revert OwnerQueryForNonexistentToken();\n                    // Invariant:\n                    // There will always be an initialized ownership slot\n                    // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n                    // before an unintialized ownership slot\n                    // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n                    // Hence, `tokenId` will not underflow.\n                    //\n                    // We can directly compare the packed value.\n                    // If the address is zero, packed will be zero.\n                    for (;;) {\n                        unchecked {\n                            packed = ERC721AStorage.layout()._packedOwnerships[--tokenId];\n                        }\n                        if (packed == 0) continue;\n                        return packed;\n                    }\n                }\n                // Otherwise, the data exists and is not burned. We can skip the scan.\n                // This is possible because we have already achieved the target condition.\n                // This saves 2143 gas on transfers of initialized tokens.\n                return packed;\n            }\n        }\n        revert OwnerQueryForNonexistentToken();\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n     */\n    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n        ownership.addr = address(uint160(packed));\n        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n        ownership.burned = packed & _BITMASK_BURNED != 0;\n        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n    }\n\n    /**\n     * @dev Packs ownership data into a single uint256.\n     */\n    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n        }\n    }\n\n    /**\n     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n     */\n    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n        // For branchless setting of the `nextInitialized` flag.\n        assembly {\n            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n        }\n    }\n\n    // =============================================================\n    //                      APPROVAL OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     */\n    function approve(address to, uint256 tokenId) public payable virtual override {\n        _approve(to, tokenId, true);\n    }\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) public view virtual override returns (address) {\n        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();\n\n        return ERC721AStorage.layout()._tokenApprovals[tokenId].value;\n    }\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual override {\n        ERC721AStorage.layout()._operatorApprovals[_msgSenderERC721A()][operator] = approved;\n        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n    }\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n        return ERC721AStorage.layout()._operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev Returns whether `tokenId` exists.\n     *\n     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n     *\n     * Tokens start existing when they are minted. See {_mint}.\n     */\n    function _exists(uint256 tokenId) internal view virtual returns (bool) {\n        return\n            _startTokenId() <= tokenId &&\n            tokenId < ERC721AStorage.layout()._currentIndex && // If within bounds,\n            ERC721AStorage.layout()._packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.\n    }\n\n    /**\n     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n     */\n    function _isSenderApprovedOrOwner(\n        address approvedAddress,\n        address owner,\n        address msgSender\n    ) private pure returns (bool result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            msgSender := and(msgSender, _BITMASK_ADDRESS)\n            // `msgSender == owner || msgSender == approvedAddress`.\n            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n        }\n    }\n\n    /**\n     * @dev Returns the storage slot and value for the approved address of `tokenId`.\n     */\n    function _getApprovedSlotAndAddress(uint256 tokenId)\n        private\n        view\n        returns (uint256 approvedAddressSlot, address approvedAddress)\n    {\n        ERC721AStorage.TokenApprovalRef storage tokenApproval = ERC721AStorage.layout()._tokenApprovals[tokenId];\n        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.\n        assembly {\n            approvedAddressSlot := tokenApproval.slot\n            approvedAddress := sload(approvedAddressSlot)\n        }\n    }\n\n    // =============================================================\n    //                      TRANSFER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        // The nested ifs save around 20+ gas over a compound boolean condition.\n        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n\n        if (to == address(0)) revert TransferToZeroAddress();\n\n        _beforeTokenTransfers(from, to, tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // We can directly increment and decrement the balances.\n            --ERC721AStorage.layout()._packedAddressData[from]; // Updates: `balance -= 1`.\n            ++ERC721AStorage.layout()._packedAddressData[to]; // Updates: `balance += 1`.\n\n            // Updates:\n            // - `address` to the next owner.\n            // - `startTimestamp` to the timestamp of transfering.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `true`.\n            ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(\n                to,\n                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != ERC721AStorage.layout()._currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        emit Transfer(from, to, tokenId);\n        _afterTokenTransfers(from, to, tokenId, 1);\n    }\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        safeTransferFrom(from, to, tokenId, '');\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) public payable virtual override {\n        transferFrom(from, to, tokenId);\n        if (to.code.length != 0)\n            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n                revert TransferToNonERC721ReceiverImplementer();\n            }\n    }\n\n    /**\n     * @dev Hook that is called before a set of serially-ordered token IDs\n     * are about to be transferred. This includes minting.\n     * And also called before burning one token.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _beforeTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Hook that is called after a set of serially-ordered token IDs\n     * have been transferred. This includes minting.\n     * And also called after one token has been burned.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` has been minted for `to`.\n     * - When `to` is zero, `tokenId` has been burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _afterTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n     *\n     * `from` - Previous owner of the given token ID.\n     * `to` - Target address that will receive the token.\n     * `tokenId` - Token ID to be transferred.\n     * `_data` - Optional data to send along with the call.\n     *\n     * Returns whether the call correctly returned the expected magic value.\n     */\n    function _checkContractOnERC721Received(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) private returns (bool) {\n        try\n            ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data)\n        returns (bytes4 retval) {\n            return retval == ERC721A__IERC721ReceiverUpgradeable(to).onERC721Received.selector;\n        } catch (bytes memory reason) {\n            if (reason.length == 0) {\n                revert TransferToNonERC721ReceiverImplementer();\n            } else {\n                assembly {\n                    revert(add(32, reason), mload(reason))\n                }\n            }\n        }\n    }\n\n    // =============================================================\n    //                        MINT OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _mint(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = ERC721AStorage.layout()._currentIndex;\n        if (quantity == 0) revert MintZeroQuantity();\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are incredibly unrealistic.\n        // `balance` and `numberMinted` have a maximum limit of 2**64.\n        // `tokenId` has a maximum limit of 2**256.\n        unchecked {\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            uint256 toMasked;\n            uint256 end = startTokenId + quantity;\n\n            // Use assembly to loop and emit the `Transfer` event for gas savings.\n            // The duplicated `log4` removes an extra check and reduces stack juggling.\n            // The assembly, together with the surrounding Solidity code, have been\n            // delicately arranged to nudge the compiler into producing optimized opcodes.\n            assembly {\n                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n                toMasked := and(to, _BITMASK_ADDRESS)\n                // Emit the `Transfer` event.\n                log4(\n                    0, // Start of data (0, since no data).\n                    0, // End of data (0, since no data).\n                    _TRANSFER_EVENT_SIGNATURE, // Signature.\n                    0, // `address(0)`.\n                    toMasked, // `to`.\n                    startTokenId // `tokenId`.\n                )\n\n                // The `iszero(eq(,))` check ensures that large values of `quantity`\n                // that overflows uint256 will make the loop run out of gas.\n                // The compiler will optimize the `iszero` away for performance.\n                for {\n                    let tokenId := add(startTokenId, 1)\n                } iszero(eq(tokenId, end)) {\n                    tokenId := add(tokenId, 1)\n                } {\n                    // Emit the `Transfer` event. Similar to above.\n                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)\n                }\n            }\n            if (toMasked == 0) revert MintToZeroAddress();\n\n            ERC721AStorage.layout()._currentIndex = end;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * This function is intended for efficient minting only during contract creation.\n     *\n     * It emits only one {ConsecutiveTransfer} as defined in\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n     * instead of a sequence of {Transfer} event(s).\n     *\n     * Calling this function outside of contract creation WILL make your contract\n     * non-compliant with the ERC721 standard.\n     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n     * {ConsecutiveTransfer} event is only permissible during contract creation.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {ConsecutiveTransfer} event.\n     */\n    function _mintERC2309(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = ERC721AStorage.layout()._currentIndex;\n        if (to == address(0)) revert MintToZeroAddress();\n        if (quantity == 0) revert MintZeroQuantity();\n        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n        unchecked {\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            ERC721AStorage.layout()._packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            ERC721AStorage.layout()._packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n            ERC721AStorage.layout()._currentIndex = startTokenId + quantity;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Safely mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n     * - `quantity` must be greater than 0.\n     *\n     * See {_mint}.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _safeMint(\n        address to,\n        uint256 quantity,\n        bytes memory _data\n    ) internal virtual {\n        _mint(to, quantity);\n\n        unchecked {\n            if (to.code.length != 0) {\n                uint256 end = ERC721AStorage.layout()._currentIndex;\n                uint256 index = end - quantity;\n                do {\n                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n                        revert TransferToNonERC721ReceiverImplementer();\n                    }\n                } while (index < end);\n                // Reentrancy protection.\n                if (ERC721AStorage.layout()._currentIndex != end) revert();\n            }\n        }\n    }\n\n    /**\n     * @dev Equivalent to `_safeMint(to, quantity, '')`.\n     */\n    function _safeMint(address to, uint256 quantity) internal virtual {\n        _safeMint(to, quantity, '');\n    }\n\n    // =============================================================\n    //                       APPROVAL OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Equivalent to `_approve(to, tokenId, false)`.\n     */\n    function _approve(address to, uint256 tokenId) internal virtual {\n        _approve(to, tokenId, false);\n    }\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function _approve(\n        address to,\n        uint256 tokenId,\n        bool approvalCheck\n    ) internal virtual {\n        address owner = ownerOf(tokenId);\n\n        if (approvalCheck)\n            if (_msgSenderERC721A() != owner)\n                if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n                    revert ApprovalCallerNotOwnerNorApproved();\n                }\n\n        ERC721AStorage.layout()._tokenApprovals[tokenId].value = to;\n        emit Approval(owner, to, tokenId);\n    }\n\n    // =============================================================\n    //                        BURN OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Equivalent to `_burn(tokenId, false)`.\n     */\n    function _burn(uint256 tokenId) internal virtual {\n        _burn(tokenId, false);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        address from = address(uint160(prevOwnershipPacked));\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        if (approvalCheck) {\n            // The nested ifs save around 20+ gas over a compound boolean condition.\n            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();\n        }\n\n        _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // Updates:\n            // - `balance -= 1`.\n            // - `numberBurned += 1`.\n            //\n            // We can directly decrement the balance, and increment the number burned.\n            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n            ERC721AStorage.layout()._packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n            // Updates:\n            // - `address` to the last owner.\n            // - `startTimestamp` to the timestamp of burning.\n            // - `burned` to `true`.\n            // - `nextInitialized` to `true`.\n            ERC721AStorage.layout()._packedOwnerships[tokenId] = _packOwnershipData(\n                from,\n                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (ERC721AStorage.layout()._packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != ERC721AStorage.layout()._currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        ERC721AStorage.layout()._packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        emit Transfer(from, address(0), tokenId);\n        _afterTokenTransfers(from, address(0), tokenId, 1);\n\n        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.\n        unchecked {\n            ERC721AStorage.layout()._burnCounter++;\n        }\n    }\n\n    // =============================================================\n    //                     EXTRA DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Directly sets the extra data for the ownership data `index`.\n     */\n    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n        uint256 packed = ERC721AStorage.layout()._packedOwnerships[index];\n        if (packed == 0) revert OwnershipNotInitializedForExtraData();\n        uint256 extraDataCasted;\n        // Cast `extraData` with assembly to avoid redundant masking.\n        assembly {\n            extraDataCasted := extraData\n        }\n        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n        ERC721AStorage.layout()._packedOwnerships[index] = packed;\n    }\n\n    /**\n     * @dev Called during each token transfer to set the 24bit `extraData` field.\n     * Intended to be overridden by the cosumer contract.\n     *\n     * `previousExtraData` - the value of `extraData` before transfer.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _extraData(\n        address from,\n        address to,\n        uint24 previousExtraData\n    ) internal view virtual returns (uint24) {}\n\n    /**\n     * @dev Returns the next extra data for the packed ownership data.\n     * The returned result is shifted into position.\n     */\n    function _nextExtraData(\n        address from,\n        address to,\n        uint256 prevOwnershipPacked\n    ) private view returns (uint256) {\n        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n    }\n\n    // =============================================================\n    //                       OTHER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the message sender (defaults to `msg.sender`).\n     *\n     * If you are writing GSN compatible contracts, you need to override this function.\n     */\n    function _msgSenderERC721A() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    /**\n     * @dev Converts a uint256 to its ASCII string decimal representation.\n     */\n    function _toString(uint256 value) internal pure virtual returns (string memory str) {\n        assembly {\n            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but\n            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.\n            // We will need 1 word for the trailing zeros padding, 1 word for the length,\n            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.\n            let m := add(mload(0x40), 0xa0)\n            // Update the free memory pointer to allocate.\n            mstore(0x40, m)\n            // Assign the `str` to the end.\n            str := sub(m, 0x20)\n            // Zeroize the slot after the string.\n            mstore(str, 0)\n\n            // Cache the end of the memory to calculate the length later.\n            let end := str\n\n            // We write the string from rightmost digit to leftmost digit.\n            // The following is essentially a do-while loop that also handles the zero case.\n            // prettier-ignore\n            for { let temp := value } 1 {} {\n                str := sub(str, 1)\n                // Write the character to the pointer.\n                // The ASCII index of the '0' character is 48.\n                mstore8(str, add(48, mod(temp, 10)))\n                // Keep dividing `temp` until zero.\n                temp := div(temp, 10)\n                // prettier-ignore\n                if iszero(temp) { break }\n            }\n\n            let length := sub(end, str)\n            // Move the pointer 32 bytes leftwards to make room for the length.\n            str := sub(str, 0x20)\n            // Store the length.\n            mstore(str, length)\n        }\n    }\n}\n"},"lib/ERC721A-Upgradeable/contracts/ERC721A__Initializable.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\n/**\n * @dev This is a base contract to aid in writing upgradeable diamond facet contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n */\n\nimport {ERC721A__InitializableStorage} from './ERC721A__InitializableStorage.sol';\n\nabstract contract ERC721A__Initializable {\n    using ERC721A__InitializableStorage for ERC721A__InitializableStorage.Layout;\n\n    /**\n     * @dev Modifier to protect an initializer function from being invoked twice.\n     */\n    modifier initializerERC721A() {\n        // If the contract is initializing we ignore whether _initialized is set in order to support multiple\n        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the\n        // contract may have been reentered.\n        require(\n            ERC721A__InitializableStorage.layout()._initializing\n                ? _isConstructor()\n                : !ERC721A__InitializableStorage.layout()._initialized,\n            'ERC721A__Initializable: contract is already initialized'\n        );\n\n        bool isTopLevelCall = !ERC721A__InitializableStorage.layout()._initializing;\n        if (isTopLevelCall) {\n            ERC721A__InitializableStorage.layout()._initializing = true;\n            ERC721A__InitializableStorage.layout()._initialized = true;\n        }\n\n        _;\n\n        if (isTopLevelCall) {\n            ERC721A__InitializableStorage.layout()._initializing = false;\n        }\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} modifier, directly or indirectly.\n     */\n    modifier onlyInitializingERC721A() {\n        require(\n            ERC721A__InitializableStorage.layout()._initializing,\n            'ERC721A__Initializable: contract is not initializing'\n        );\n        _;\n    }\n\n    /// @dev Returns true if and only if the function is running in the constructor\n    function _isConstructor() private view returns (bool) {\n        // extcodesize checks the size of the code stored in an address, and\n        // address returns the current address. Since the code is still not\n        // deployed when running a constructor, any checks on its code size will\n        // yield zero, making it an effective way to detect if a contract is\n        // under construction or not.\n        address self = address(this);\n        uint256 cs;\n        assembly {\n            cs := extcodesize(self)\n        }\n        return cs == 0;\n    }\n}\n"},"src/interfaces/permit2/ISignatureTransfer.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IEIP712} from \"./IEIP712.sol\";\n\n/// @title SignatureTransfer\n/// @notice Handles ERC20 token transfers through signature based actions\n/// @dev Requires user's token approval on the Permit2 contract\ninterface ISignatureTransfer is IEIP712 {\n    /// @notice Thrown when the requested amount for a transfer is larger than the permissioned amount\n    /// @param maxAmount The maximum amount a spender can request to transfer\n    error InvalidAmount(uint256 maxAmount);\n\n    /// @notice Thrown when the number of tokens permissioned to a spender does not match the number of tokens being transferred\n    /// @dev If the spender does not need to transfer the number of tokens permitted, the spender can request amount 0 to be transferred\n    error LengthMismatch();\n\n    /// @notice Emits an event when the owner successfully invalidates an unordered nonce.\n    event UnorderedNonceInvalidation(address indexed owner, uint256 word, uint256 mask);\n\n    /// @notice The token and amount details for a transfer signed in the permit transfer signature\n    struct TokenPermissions {\n        // ERC20 token address\n        address token;\n        // the maximum amount that can be spent\n        uint256 amount;\n    }\n\n    /// @notice The signed permit message for a single token transfer\n    struct PermitTransferFrom {\n        TokenPermissions permitted;\n        // a unique value for every token owner's signature to prevent signature replays\n        uint256 nonce;\n        // deadline on the permit signature\n        uint256 deadline;\n    }\n\n    /// @notice Specifies the recipient address and amount for batched transfers.\n    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.\n    /// @dev Reverts if the requested amount is greater than the permitted signed amount.\n    struct SignatureTransferDetails {\n        // recipient address\n        address to;\n        // spender requested amount\n        uint256 requestedAmount;\n    }\n\n    /// @notice Used to reconstruct the signed permit message for multiple token transfers\n    /// @dev Do not need to pass in spender address as it is required that it is msg.sender\n    /// @dev Note that a user still signs over a spender address\n    struct PermitBatchTransferFrom {\n        // the tokens and corresponding amounts permitted for a transfer\n        TokenPermissions[] permitted;\n        // a unique value for every token owner's signature to prevent signature replays\n        uint256 nonce;\n        // deadline on the permit signature\n        uint256 deadline;\n    }\n\n    /// @notice A map from token owner address and a caller specified word index to a bitmap. Used to set bits in the bitmap to prevent against signature replay protection\n    /// @dev Uses unordered nonces so that permit messages do not need to be spent in a certain order\n    /// @dev The mapping is indexed first by the token owner, then by an index specified in the nonce\n    /// @dev It returns a uint256 bitmap\n    /// @dev The index, or wordPosition is capped at type(uint248).max\n    function nonceBitmap(address, uint256) external view returns (uint256);\n\n    /// @notice Transfers a token using a signed permit message\n    /// @dev Reverts if the requested amount is greater than the permitted signed amount\n    /// @param permit The permit data signed over by the owner\n    /// @param owner The owner of the tokens to transfer\n    /// @param transferDetails The spender's requested transfer details for the permitted token\n    /// @param signature The signature to verify\n    function permitTransferFrom(\n        PermitTransferFrom memory permit,\n        SignatureTransferDetails calldata transferDetails,\n        address owner,\n        bytes calldata signature\n    ) external;\n\n    /// @notice Transfers a token using a signed permit message\n    /// @notice Includes extra data provided by the caller to verify signature over\n    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition\n    /// @dev Reverts if the requested amount is greater than the permitted signed amount\n    /// @param permit The permit data signed over by the owner\n    /// @param owner The owner of the tokens to transfer\n    /// @param transferDetails The spender's requested transfer details for the permitted token\n    /// @param witness Extra data to include when checking the user signature\n    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash\n    /// @param signature The signature to verify\n    function permitWitnessTransferFrom(\n        PermitTransferFrom memory permit,\n        SignatureTransferDetails calldata transferDetails,\n        address owner,\n        bytes32 witness,\n        string calldata witnessTypeString,\n        bytes calldata signature\n    ) external;\n\n    /// @notice Transfers multiple tokens using a signed permit message\n    /// @param permit The permit data signed over by the owner\n    /// @param owner The owner of the tokens to transfer\n    /// @param transferDetails Specifies the recipient and requested amount for the token transfer\n    /// @param signature The signature to verify\n    function permitTransferFrom(\n        PermitBatchTransferFrom memory permit,\n        SignatureTransferDetails[] calldata transferDetails,\n        address owner,\n        bytes calldata signature\n    ) external;\n\n    /// @notice Transfers multiple tokens using a signed permit message\n    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition\n    /// @notice Includes extra data provided by the caller to verify signature over\n    /// @param permit The permit data signed over by the owner\n    /// @param owner The owner of the tokens to transfer\n    /// @param transferDetails Specifies the recipient and requested amount for the token transfer\n    /// @param witness Extra data to include when checking the user signature\n    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash\n    /// @param signature The signature to verify\n    function permitWitnessTransferFrom(\n        PermitBatchTransferFrom memory permit,\n        SignatureTransferDetails[] calldata transferDetails,\n        address owner,\n        bytes32 witness,\n        string calldata witnessTypeString,\n        bytes calldata signature\n    ) external;\n\n    /// @notice Invalidates the bits specified in mask for the bitmap at the word position\n    /// @dev The wordPos is maxed at type(uint248).max\n    /// @param wordPos A number to index the nonceBitmap at\n    /// @param mask A bitmap masked against msg.sender's current bitmap at the word position\n    function invalidateUnorderedNonces(uint256 wordPos, uint256 mask) external;\n}\n"},"src/interfaces/permit2/IAllowanceTransfer.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IEIP712} from \"./IEIP712.sol\";\n\n/// @title AllowanceTransfer\n/// @notice Handles ERC20 token permissions through signature based allowance setting and ERC20 token transfers by checking allowed amounts\n/// @dev Requires user's token approval on the Permit2 contract\ninterface IAllowanceTransfer is IEIP712 {\n    /// @notice Thrown when an allowance on a token has expired.\n    /// @param deadline The timestamp at which the allowed amount is no longer valid\n    error AllowanceExpired(uint256 deadline);\n\n    /// @notice Thrown when an allowance on a token has been depleted.\n    /// @param amount The maximum amount allowed\n    error InsufficientAllowance(uint256 amount);\n\n    /// @notice Thrown when too many nonces are invalidated.\n    error ExcessiveInvalidation();\n\n    /// @notice Emits an event when the owner successfully invalidates an ordered nonce.\n    event NonceInvalidation(\n        address indexed owner, address indexed token, address indexed spender, uint48 newNonce, uint48 oldNonce\n    );\n\n    /// @notice Emits an event when the owner successfully sets permissions on a token for the spender.\n    event Approval(\n        address indexed owner, address indexed token, address indexed spender, uint160 amount, uint48 expiration\n    );\n\n    /// @notice Emits an event when the owner successfully sets permissions using a permit signature on a token for the spender.\n    event Permit(\n        address indexed owner,\n        address indexed token,\n        address indexed spender,\n        uint160 amount,\n        uint48 expiration,\n        uint48 nonce\n    );\n\n    /// @notice Emits an event when the owner sets the allowance back to 0 with the lockdown function.\n    event Lockdown(address indexed owner, address token, address spender);\n\n    /// @notice The permit data for a token\n    struct PermitDetails {\n        // ERC20 token address\n        address token;\n        // the maximum amount allowed to spend\n        uint160 amount;\n        // timestamp at which a spender's token allowances become invalid\n        uint48 expiration;\n        // an incrementing value indexed per owner,token,and spender for each signature\n        uint48 nonce;\n    }\n\n    /// @notice The permit message signed for a single token allowance\n    struct PermitSingle {\n        // the permit data for a single token alownce\n        PermitDetails details;\n        // address permissioned on the allowed tokens\n        address spender;\n        // deadline on the permit signature\n        uint256 sigDeadline;\n    }\n\n    /// @notice The permit message signed for multiple token allowances\n    struct PermitBatch {\n        // the permit data for multiple token allowances\n        PermitDetails[] details;\n        // address permissioned on the allowed tokens\n        address spender;\n        // deadline on the permit signature\n        uint256 sigDeadline;\n    }\n\n    /// @notice The saved permissions\n    /// @dev This info is saved per owner, per token, per spender and all signed over in the permit message\n    /// @dev Setting amount to type(uint160).max sets an unlimited approval\n    struct PackedAllowance {\n        // amount allowed\n        uint160 amount;\n        // permission expiry\n        uint48 expiration;\n        // an incrementing value indexed per owner,token,and spender for each signature\n        uint48 nonce;\n    }\n\n    /// @notice A token spender pair.\n    struct TokenSpenderPair {\n        // the token the spender is approved\n        address token;\n        // the spender address\n        address spender;\n    }\n\n    /// @notice Details for a token transfer.\n    struct AllowanceTransferDetails {\n        // the owner of the token\n        address from;\n        // the recipient of the token\n        address to;\n        // the amount of the token\n        uint160 amount;\n        // the token to be transferred\n        address token;\n    }\n\n    /// @notice A mapping from owner address to token address to spender address to PackedAllowance struct, which contains details and conditions of the approval.\n    /// @notice The mapping is indexed in the above order see: allowance[ownerAddress][tokenAddress][spenderAddress]\n    /// @dev The packed slot holds the allowed amount, expiration at which the allowed amount is no longer valid, and current nonce thats updated on any signature based approvals.\n    function allowance(address user, address token, address spender)\n        external\n        view\n        returns (uint160 amount, uint48 expiration, uint48 nonce);\n\n    /// @notice Approves the spender to use up to amount of the specified token up until the expiration\n    /// @param token The token to approve\n    /// @param spender The spender address to approve\n    /// @param amount The approved amount of the token\n    /// @param expiration The timestamp at which the approval is no longer valid\n    /// @dev The packed allowance also holds a nonce, which will stay unchanged in approve\n    /// @dev Setting amount to type(uint160).max sets an unlimited approval\n    function approve(address token, address spender, uint160 amount, uint48 expiration) external;\n\n    /// @notice Permit a spender to a given amount of the owners token via the owner's EIP-712 signature\n    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce\n    /// @param owner The owner of the tokens being approved\n    /// @param permitSingle Data signed over by the owner specifying the terms of approval\n    /// @param signature The owner's signature over the permit data\n    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;\n\n    /// @notice Permit a spender to the signed amounts of the owners tokens via the owner's EIP-712 signature\n    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce\n    /// @param owner The owner of the tokens being approved\n    /// @param permitBatch Data signed over by the owner specifying the terms of approval\n    /// @param signature The owner's signature over the permit data\n    function permit(address owner, PermitBatch memory permitBatch, bytes calldata signature) external;\n\n    /// @notice Transfer approved tokens from one address to another\n    /// @param from The address to transfer from\n    /// @param to The address of the recipient\n    /// @param amount The amount of the token to transfer\n    /// @param token The token address to transfer\n    /// @dev Requires the from address to have approved at least the desired amount\n    /// of tokens to msg.sender.\n    function transferFrom(address from, address to, uint160 amount, address token) external;\n\n    /// @notice Transfer approved tokens in a batch\n    /// @param transferDetails Array of owners, recipients, amounts, and tokens for the transfers\n    /// @dev Requires the from addresses to have approved at least the desired amount\n    /// of tokens to msg.sender.\n    function transferFrom(AllowanceTransferDetails[] calldata transferDetails) external;\n\n    /// @notice Enables performing a \"lockdown\" of the sender's Permit2 identity\n    /// by batch revoking approvals\n    /// @param approvals Array of approvals to revoke.\n    function lockdown(TokenSpenderPair[] calldata approvals) external;\n\n    /// @notice Invalidate nonces for a given (token, spender) pair\n    /// @param token The token to invalidate nonces for\n    /// @param spender The spender to invalidate nonces for\n    /// @param newNonce The new nonce to set. Invalidates all nonces less than it.\n    /// @dev Can't invalidate more than 2**16 nonces per transaction.\n    function invalidateNonces(address token, address spender, uint48 newNonce) external;\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/access/AccessControlUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/AccessControl.sol)\n\npragma solidity ^0.8.20;\n\nimport {IAccessControl} from \"@openzeppelin/contracts/access/IAccessControl.sol\";\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {IERC165} from \"@openzeppelin/contracts/utils/introspection/IERC165.sol\";\nimport {ERC165Upgradeable} from \"../utils/introspection/ERC165Upgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that allows children to implement role-based access\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\n * members except through off-chain means by accessing the contract event logs. Some\n * applications may benefit from on-chain enumerability, for those cases see\n * {AccessControlEnumerable}.\n *\n * Roles are referred to by their `bytes32` identifier. These should be exposed\n * in the external API and be unique. The best way to achieve this is by\n * using `public constant` hash digests:\n *\n * ```solidity\n * bytes32 public constant MY_ROLE = keccak256(\"MY_ROLE\");\n * ```\n *\n * Roles can be used to represent a set of permissions. To restrict access to a\n * function call, use {hasRole}:\n *\n * ```solidity\n * function foo() public {\n *     require(hasRole(MY_ROLE, msg.sender));\n *     ...\n * }\n * ```\n *\n * Roles can be granted and revoked dynamically via the {grantRole} and\n * {revokeRole} functions. Each role has an associated admin role, and only\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\n *\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\n * that only accounts with this role will be able to grant or revoke other\n * roles. More complex role relationships can be created by using\n * {_setRoleAdmin}.\n *\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\n * grant and revoke this role. Extra precautions should be taken to secure\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\n * to enforce additional security measures for this role.\n */\nabstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControl, ERC165Upgradeable {\n    struct RoleData {\n        mapping(address account => bool) hasRole;\n        bytes32 adminRole;\n    }\n\n    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\n\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl\n    struct AccessControlStorage {\n        mapping(bytes32 role => RoleData) _roles;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.AccessControl\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;\n\n    function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {\n        assembly {\n            $.slot := AccessControlStorageLocation\n        }\n    }\n\n    /**\n     * @dev Modifier that checks that an account has a specific role. Reverts\n     * with an {AccessControlUnauthorizedAccount} error including the required role.\n     */\n    modifier onlyRole(bytes32 role) {\n        _checkRole(role);\n        _;\n    }\n\n    function __AccessControl_init() internal onlyInitializing {\n    }\n\n    function __AccessControl_init_unchained() internal onlyInitializing {\n    }\n    /// @inheritdoc IERC165\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) public view virtual returns (bool) {\n        AccessControlStorage storage $ = _getAccessControlStorage();\n        return $._roles[role].hasRole[account];\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`\n     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.\n     */\n    function _checkRole(bytes32 role) internal view virtual {\n        _checkRole(role, _msgSender());\n    }\n\n    /**\n     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`\n     * is missing `role`.\n     */\n    function _checkRole(bytes32 role, address account) internal view virtual {\n        if (!hasRole(role, account)) {\n            revert AccessControlUnauthorizedAccount(account, role);\n        }\n    }\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {\n        AccessControlStorage storage $ = _getAccessControlStorage();\n        return $._roles[role].adminRole;\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _grantRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {\n        _revokeRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been revoked `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) public virtual {\n        if (callerConfirmation != _msgSender()) {\n            revert AccessControlBadConfirmation();\n        }\n\n        _revokeRole(role, callerConfirmation);\n    }\n\n    /**\n     * @dev Sets `adminRole` as ``role``'s admin role.\n     *\n     * Emits a {RoleAdminChanged} event.\n     */\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\n        AccessControlStorage storage $ = _getAccessControlStorage();\n        bytes32 previousAdminRole = getRoleAdmin(role);\n        $._roles[role].adminRole = adminRole;\n        emit RoleAdminChanged(role, previousAdminRole, adminRole);\n    }\n\n    /**\n     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {\n        AccessControlStorage storage $ = _getAccessControlStorage();\n        if (!hasRole(role, account)) {\n            $._roles[role].hasRole[account] = true;\n            emit RoleGranted(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n\n    /**\n     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {\n        AccessControlStorage storage $ = _getAccessControlStorage();\n        if (hasRole(role, account)) {\n            $._roles[role].hasRole[account] = false;\n            emit RoleRevoked(role, account, _msgSender());\n            return true;\n        } else {\n            return false;\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/access/OwnableUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {ContextUpgradeable} from \"../utils/ContextUpgradeable.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\n    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable\n    struct OwnableStorage {\n        address _owner;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.Ownable\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;\n\n    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {\n        assembly {\n            $.slot := OwnableStorageLocation\n        }\n    }\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    function __Ownable_init(address initialOwner) internal onlyInitializing {\n        __Ownable_init_unchained(initialOwner);\n    }\n\n    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        OwnableStorage storage $ = _getOwnableStorage();\n        return $._owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        OwnableStorage storage $ = _getOwnableStorage();\n        address oldOwner = $._owner;\n        $._owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/proxy/Clones.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (proxy/Clones.sol)\n\npragma solidity ^0.8.20;\n\nimport {Create2} from \"../utils/Create2.sol\";\nimport {Errors} from \"../utils/Errors.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-1167[ERC-1167] is a standard for\n * deploying minimal proxy contracts, also known as \"clones\".\n *\n * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies\n * > a minimal bytecode implementation that delegates all calls to a known, fixed address.\n *\n * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`\n * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the\n * deterministic method.\n */\nlibrary Clones {\n    error CloneArgumentsTooLong();\n\n    /**\n     * @dev Deploys and returns the address of a clone that mimics the behavior of `implementation`.\n     *\n     * This function uses the create opcode, which should never revert.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     */\n    function clone(address implementation) internal returns (address instance) {\n        return clone(implementation, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Clones-clone-address-}[clone], but with a `value` parameter to send native currency\n     * to the new contract.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     *\n     * NOTE: Using a non-zero value at creation will require the contract using this function (e.g. a factory)\n     * to always have enough balance for new deployments. Consider exposing this function under a payable method.\n     */\n    function clone(address implementation, uint256 value) internal returns (address instance) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        assembly (\"memory-safe\") {\n            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes\n            // of the `implementation` address with the bytecode before the address.\n            mstore(0x00, or(shr(232, shl(96, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))\n            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.\n            mstore(0x20, or(shl(120, implementation), 0x5af43d82803e903d91602b57fd5bf3))\n            instance := create(value, 0x09, 0x37)\n        }\n        if (instance == address(0)) {\n            revert Errors.FailedDeployment();\n        }\n    }\n\n    /**\n     * @dev Deploys and returns the address of a clone that mimics the behavior of `implementation`.\n     *\n     * This function uses the create2 opcode and a `salt` to deterministically deploy\n     * the clone. Using the same `implementation` and `salt` multiple times will revert, since\n     * the clones cannot be deployed twice at the same address.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     */\n    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {\n        return cloneDeterministic(implementation, salt, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Clones-cloneDeterministic-address-bytes32-}[cloneDeterministic], but with\n     * a `value` parameter to send native currency to the new contract.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     *\n     * NOTE: Using a non-zero value at creation will require the contract using this function (e.g. a factory)\n     * to always have enough balance for new deployments. Consider exposing this function under a payable method.\n     */\n    function cloneDeterministic(\n        address implementation,\n        bytes32 salt,\n        uint256 value\n    ) internal returns (address instance) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        assembly (\"memory-safe\") {\n            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes\n            // of the `implementation` address with the bytecode before the address.\n            mstore(0x00, or(shr(232, shl(96, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))\n            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.\n            mstore(0x20, or(shl(120, implementation), 0x5af43d82803e903d91602b57fd5bf3))\n            instance := create2(value, 0x09, 0x37, salt)\n        }\n        if (instance == address(0)) {\n            revert Errors.FailedDeployment();\n        }\n    }\n\n    /**\n     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.\n     */\n    function predictDeterministicAddress(\n        address implementation,\n        bytes32 salt,\n        address deployer\n    ) internal pure returns (address predicted) {\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            mstore(add(ptr, 0x38), deployer)\n            mstore(add(ptr, 0x24), 0x5af43d82803e903d91602b57fd5bf3ff)\n            mstore(add(ptr, 0x14), implementation)\n            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73)\n            mstore(add(ptr, 0x58), salt)\n            mstore(add(ptr, 0x78), keccak256(add(ptr, 0x0c), 0x37))\n            predicted := and(keccak256(add(ptr, 0x43), 0x55), 0xffffffffffffffffffffffffffffffffffffffff)\n        }\n    }\n\n    /**\n     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.\n     */\n    function predictDeterministicAddress(\n        address implementation,\n        bytes32 salt\n    ) internal view returns (address predicted) {\n        return predictDeterministicAddress(implementation, salt, address(this));\n    }\n\n    /**\n     * @dev Deploys and returns the address of a clone that mimics the behavior of `implementation` with custom\n     * immutable arguments. These are provided through `args` and cannot be changed after deployment. To\n     * access the arguments within the implementation, use {fetchCloneArgs}.\n     *\n     * This function uses the create opcode, which should never revert.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     */\n    function cloneWithImmutableArgs(address implementation, bytes memory args) internal returns (address instance) {\n        return cloneWithImmutableArgs(implementation, args, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Clones-cloneWithImmutableArgs-address-bytes-}[cloneWithImmutableArgs], but with a `value`\n     * parameter to send native currency to the new contract.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     *\n     * NOTE: Using a non-zero value at creation will require the contract using this function (e.g. a factory)\n     * to always have enough balance for new deployments. Consider exposing this function under a payable method.\n     */\n    function cloneWithImmutableArgs(\n        address implementation,\n        bytes memory args,\n        uint256 value\n    ) internal returns (address instance) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        bytes memory bytecode = _cloneCodeWithImmutableArgs(implementation, args);\n        assembly (\"memory-safe\") {\n            instance := create(value, add(bytecode, 0x20), mload(bytecode))\n        }\n        if (instance == address(0)) {\n            revert Errors.FailedDeployment();\n        }\n    }\n\n    /**\n     * @dev Deploys and returns the address of a clone that mimics the behavior of `implementation` with custom\n     * immutable arguments. These are provided through `args` and cannot be changed after deployment. To\n     * access the arguments within the implementation, use {fetchCloneArgs}.\n     *\n     * This function uses the create2 opcode and a `salt` to deterministically deploy the clone. Using the same\n     * `implementation`, `args` and `salt` multiple times will revert, since the clones cannot be deployed twice\n     * at the same address.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     */\n    function cloneDeterministicWithImmutableArgs(\n        address implementation,\n        bytes memory args,\n        bytes32 salt\n    ) internal returns (address instance) {\n        return cloneDeterministicWithImmutableArgs(implementation, args, salt, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Clones-cloneDeterministicWithImmutableArgs-address-bytes-bytes32-}[cloneDeterministicWithImmutableArgs],\n     * but with a `value` parameter to send native currency to the new contract.\n     *\n     * WARNING: This function does not check if `implementation` has code. A clone that points to an address\n     * without code cannot be initialized. Initialization calls may appear to be successful when, in reality, they\n     * have no effect and leave the clone uninitialized, allowing a third party to initialize it later.\n     *\n     * NOTE: Using a non-zero value at creation will require the contract using this function (e.g. a factory)\n     * to always have enough balance for new deployments. Consider exposing this function under a payable method.\n     */\n    function cloneDeterministicWithImmutableArgs(\n        address implementation,\n        bytes memory args,\n        bytes32 salt,\n        uint256 value\n    ) internal returns (address instance) {\n        bytes memory bytecode = _cloneCodeWithImmutableArgs(implementation, args);\n        return Create2.deploy(value, salt, bytecode);\n    }\n\n    /**\n     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministicWithImmutableArgs}.\n     */\n    function predictDeterministicAddressWithImmutableArgs(\n        address implementation,\n        bytes memory args,\n        bytes32 salt,\n        address deployer\n    ) internal pure returns (address predicted) {\n        bytes memory bytecode = _cloneCodeWithImmutableArgs(implementation, args);\n        return Create2.computeAddress(salt, keccak256(bytecode), deployer);\n    }\n\n    /**\n     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministicWithImmutableArgs}.\n     */\n    function predictDeterministicAddressWithImmutableArgs(\n        address implementation,\n        bytes memory args,\n        bytes32 salt\n    ) internal view returns (address predicted) {\n        return predictDeterministicAddressWithImmutableArgs(implementation, args, salt, address(this));\n    }\n\n    /**\n     * @dev Get the immutable args attached to a clone.\n     *\n     * - If `instance` is a clone that was deployed using `clone` or `cloneDeterministic`, this\n     *   function will return an empty array.\n     * - If `instance` is a clone that was deployed using `cloneWithImmutableArgs` or\n     *   `cloneDeterministicWithImmutableArgs`, this function will return the args array used at\n     *   creation.\n     * - If `instance` is NOT a clone deployed using this library, the behavior is undefined. This\n     *   function should only be used to check addresses that are known to be clones.\n     */\n    function fetchCloneArgs(address instance) internal view returns (bytes memory) {\n        bytes memory result = new bytes(instance.code.length - 0x2d); // revert if length is too short\n        assembly (\"memory-safe\") {\n            extcodecopy(instance, add(result, 0x20), 0x2d, mload(result))\n        }\n        return result;\n    }\n\n    /**\n     * @dev Helper that prepares the initcode of the proxy with immutable args.\n     *\n     * An assembly variant of this function requires copying the `args` array, which can be efficiently done using\n     * `mcopy`. Unfortunately, that opcode is not available before cancun. A pure solidity implementation using\n     * abi.encodePacked is more expensive but also more portable and easier to review.\n     *\n     * NOTE: https://eips.ethereum.org/EIPS/eip-170[EIP-170] limits the length of the contract code to 24576 bytes.\n     * With the proxy code taking 45 bytes, that limits the length of the immutable args to 24531 bytes.\n     */\n    function _cloneCodeWithImmutableArgs(\n        address implementation,\n        bytes memory args\n    ) private pure returns (bytes memory) {\n        if (args.length > 0x5fd3) revert CloneArgumentsTooLong();\n        return\n            abi.encodePacked(\n                hex\"61\",\n                uint16(args.length + 0x2d),\n                hex\"3d81600a3d39f3363d3d373d3d3d363d73\",\n                implementation,\n                hex\"5af43d82803e903d91602b57fd5bf3\",\n                args\n            );\n    }\n}\n"},"src/BeezieClawMachineV2.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.30;\n\n// OpenZeppelin Contracts\nimport {OwnableUpgradeable} from \"@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol\";\nimport {ERC2771ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/metatx/ERC2771ContextUpgradeable.sol\";\nimport {ContextUpgradeable} from \"@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol\";\nimport {EIP712Upgradeable} from \"@openzeppelin/contracts-upgradeable/utils/cryptography/EIP712Upgradeable.sol\";\nimport {IERC20Permit} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol\";\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {SafeCast} from \"@openzeppelin/contracts/utils/math/SafeCast.sol\";\nimport {SignatureChecker} from \"@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol\";\nimport {IERC721} from \"@openzeppelin/contracts/token/ERC721/IERC721.sol\";\n\n// Structs\nimport {ClawMachineDeposit, Permit, Permit2Permit} from \"@/structs/Structs.sol\";\n\n// Interfaces\nimport {IPermit2, ISignatureTransfer} from \"@/interfaces/permit2/IPermit2.sol\";\nimport {IBeezieClawMachine} from \"@/interfaces/IBeezieClawMachine.sol\";\nimport {IBeezieVRFConsumer} from \"@/interfaces/IBeezieVRFConsumer.sol\";\n\n// Core\nimport {BeezieCollectiblesV2} from \"@/BeezieCollectiblesV2.sol\";\nimport {BeezieClawMachineFactoryV2} from \"@/BeezieClawMachineFactoryV2.sol\";\n\ncontract BeezieClawMachineV2 is OwnableUpgradeable, ERC2771ContextUpgradeable, EIP712Upgradeable, IBeezieClawMachine {\n    using SafeERC20 for IERC20;\n    using SafeCast for uint256;\n\n    //----------------------------------\n    // Constants\n    //----------------------------------\n    IPermit2 public constant PERMIT2 = IPermit2(0x000000000022D473030F116dDEE9F6B43aC78BA3);\n    bytes32 public constant PLAY_TYPEHASH = keccak256(\"Play(address user,uint8 times,uint256 nonce)\");\n\n    //----------------------------------\n    // Errors\n    //----------------------------------\n    error ArrayLengthMismatch();\n    error NoPrizes();\n    error NotActive();\n    error ClawMachineFinished();\n    error ClawMachinePaused();\n    error InvalidSignature();\n    error NotPaused();\n    error InvalidSender();\n    error InvalidRandomNumbers();\n    error TokenInPrizePool();\n    error InvalidTimes();\n    error UserBlacklisted();\n\n    //----------------------------------\n    // Events\n    //----------------------------------\n    event Played(address indexed user, uint256 indexed amount);\n    event Won(address indexed user, uint256 indexed tokenId, uint256 indexed swapValue);\n    event Paused();\n    event Unpaused();\n    event Stopped();\n\n    //----------------------------------\n    // Storage\n    //----------------------------------\n    IERC20 private _playToken;\n\n    BeezieClawMachineFactoryV2 public immutable factory;\n    BeezieCollectiblesV2 public immutable beezieCollectibles;\n    IBeezieVRFConsumer public vrfConsumer;\n\n    uint128 public price;\n    uint40 public startTime;\n    bool public paused;\n    bool public isFinished;\n    address public gelatoVRFOperator;\n    uint256 public effectivePrizePoolSize;\n    ClawMachineDeposit[] private _prizePool;\n    mapping(address user => uint256 nonce) public playNonce;\n    mapping(address user => mapping(uint256 requestRandomNumber => uint8 times)) public playTimes;\n\n    //----------------------------------\n    // Modifiers\n    //----------------------------------\n\n    modifier whenActive() {\n        if (block.timestamp < startTime) {\n            revert NotActive();\n        }\n        if (isFinished) {\n            revert ClawMachineFinished();\n        }\n        if (paused) {\n            revert ClawMachinePaused();\n        }\n        _;\n    }\n\n    //----------------------------------\n    // Constructor\n    //----------------------------------\n    constructor(address _factory, address _beezieCollectibles, address _trustedForwarder)\n        ERC2771ContextUpgradeable(_trustedForwarder)\n    {\n        _disableInitializers();\n\n        factory = BeezieClawMachineFactoryV2(_factory);\n        beezieCollectibles = BeezieCollectiblesV2(_beezieCollectibles);\n    }\n\n    //----------------------------------\n    // Initializer\n    //----------------------------------\n    /**\n     * @notice Initialize the claw machine\n     * @param manager The manager of the claw machine\n     * @param _swapToken The token to use for the play\n     * @param _price The price of the play\n     * @param _startTime The start time of the claw machine\n     * @param _gelatoVRFOperator The operator of the Gelato VRF\n     * @param _beezieVRFConsumer The Beezie VRF consumer\n     */\n    function initialize(\n        address manager,\n        address _swapToken,\n        uint128 _price,\n        uint40 _startTime,\n        address _gelatoVRFOperator,\n        address _beezieVRFConsumer\n    ) public initializer {\n        __Ownable_init(manager);\n        __EIP712_init(\"Claw Machine\", \"1\");\n\n        _playToken = IERC20(_swapToken);\n        price = _price;\n        startTime = _startTime;\n        gelatoVRFOperator = _gelatoVRFOperator;\n        vrfConsumer = IBeezieVRFConsumer(_beezieVRFConsumer);\n    }\n\n    //----------------------------------\n    // Getters\n    //----------------------------------\n\n    /**\n     * @notice Check if a forwarder is trusted\n     * @param forwarder The forwarder to check\n     * @return True if the forwarder is trusted, false otherwise\n     */\n    function isTrustedForwarder(address forwarder) public view override(ERC2771ContextUpgradeable) returns (bool) {\n        return factory.isTrustedForwarder(forwarder);\n    }\n\n    /**\n     * @notice Get the token used for the play\n     * @return The address of the token used for the play\n     */\n    function playToken() external view override returns (address) {\n        return address(_playToken);\n    }\n\n    //----------------------------------\n    // Public\n    //----------------------------------\n\n    /**\n     * @notice Initiate a play for a user, paid for by the operator\n     * @dev can only be called by a valid operator\n     * @param user The user to play for\n     * @param times The number of times to play\n     * @param signature Backend signature to verify play is allowed\n     */\n    function playFor(address user, uint8 times, bytes calldata signature) external {\n        address dest = factory.clawFinanceWallet();\n        _playToken.safeTransferFrom(_msgSender(), dest, price * times);\n\n        _play(user, times, signature);\n    }\n\n    /**\n     * @notice Initiate a play for a user, paid for the user with a valid ERC-20 transfer permit\n     * @dev enables gasless (sponsored) plays, only requiring a permit signature from the user\n     * @dev can only be called by a valid operator\n     * @param user The user, and payor of the play\n     * @param times The number of times to play\n     * @param permit Signed ERC-20 transfer permit from the user\n     * @param signature Backend signature to verify play is allowed\n     */\n    function playWithPermitFor(address user, uint8 times, Permit memory permit, bytes calldata signature)\n        external\n    {\n        uint256 totalPrice = price * times;\n        address dest = factory.clawFinanceWallet();\n        IERC20Permit(address(_playToken))\n            .permit(user, address(this), totalPrice, permit.deadline, permit.v, permit.r, permit.s);\n        _playToken.safeTransferFrom(user, dest, totalPrice);\n\n        _play(user, times, signature);\n    }\n\n    /**\n     * @notice Initiate a play for a user, paid for the user with a valid ERC-20 transfer permit2\n     * @dev enables gasless (sponsored) plays, only requiring a permit signature from the user\n     * @dev can only be called by a valid operator\n     * @param user The user, and payor of the play\n     * @param times The number of times to play\n     * @param permit2Permit The permit2 permit\n     * @param signature Backend signature to verify play is allowed\n     */\n    function playWithPermit2For(address user, uint8 times, Permit2Permit memory permit2Permit, bytes calldata signature)\n        external\n    {\n        uint256 totalPrice = price * times;\n        ISignatureTransfer.PermitTransferFrom memory permit = ISignatureTransfer.PermitTransferFrom({\n            permitted: ISignatureTransfer.TokenPermissions({token: address(_playToken), amount: totalPrice}),\n            nonce: permit2Permit.nonce,\n            deadline: permit2Permit.deadline\n        });\n        ISignatureTransfer.SignatureTransferDetails memory transferDetails =\n            ISignatureTransfer.SignatureTransferDetails({to: factory.clawFinanceWallet(), requestedAmount: totalPrice});\n        PERMIT2.permitTransferFrom(permit, transferDetails, user, permit2Permit.signature);\n\n        _play(user, times, signature);\n    }\n\n    /**\n     * @notice Deposit items into the claw machine\n     * @param tokenIds The token IDs to deposit\n     * @param swapValues The swap values for the items\n     * @param tokensOwner The owner of the tokens\n     */\n    function deposit(uint256[] calldata tokenIds, uint128[] calldata swapValues, address tokensOwner)\n        external\n        onlyOwner\n    {\n        uint256 length = tokenIds.length;\n        if (length != swapValues.length) revert ArrayLengthMismatch();\n\n        uint128 totalAmount;\n        uint48[] memory tokenIds48 = new uint48[](length);\n        for (uint256 i; i < length; ++i) {\n            uint48 tokenId = tokenIds[i].toUint48();\n            tokenIds48[i] = tokenId;\n            totalAmount += swapValues[i];\n            _prizePool.push(\n                ClawMachineDeposit({tokenId: tokenId, swapValue: swapValues[i], timestamp: block.timestamp.toUint40()})\n            );\n        }\n        effectivePrizePoolSize += length;\n        _transferWithValidatorCallback(address(beezieCollectibles), tokensOwner, address(this), tokenIds48);\n    }\n\n    /**\n     * @notice Stop the claw machine\n     */\n    function stop() external onlyOwner {\n        isFinished = true;\n        emit Stopped();\n    }\n\n    /**\n     * @notice Toggle the pause state of the claw machine\n     */\n    function togglePause() external onlyOwner {\n        paused = !paused;\n        if (paused) {\n            emit Paused();\n        } else {\n            emit Unpaused();\n        }\n    }\n\n    /**\n     * @notice Withdraw items from the claw machine\n     * @dev Requires the claw machine to be paused. Quantity is clamped to the number of\n     *      items not already reserved for pending VRF pulls (effectivePrizePoolSize) to\n     *      avoid underflow and to preserve in-flight pulls.\n     * @param quantity The quantity of items to withdraw\n     */\n    function withdrawItems(uint256 quantity) external onlyOwner {\n        if (!paused) {\n            revert NotPaused();\n        }\n\n        uint256 prizePoolLength = _prizePool.length;\n\n        quantity = min(quantity, effectivePrizePoolSize);\n\n        uint48[] memory tokenIds = new uint48[](quantity);\n\n        for (uint256 i; i < quantity; ++i) {\n            ClawMachineDeposit storage prize = _prizePool[prizePoolLength - i - 1];\n            tokenIds[i] = prize.tokenId;\n            _prizePool.pop();\n        }\n        effectivePrizePoolSize -= quantity;\n\n        _transferWithValidatorCallback(address(beezieCollectibles), address(this), owner(), tokenIds);\n    }\n\n    /**\n     * @notice Withdraw items from the claw machine that are not in the prize pool\n     * @dev Validates that the token IDs are not in the prize pool\n     * @param tokenIds The token IDs to withdraw\n     */\n    function withdrawItemsNonPrizePool(uint256[] calldata tokenIds) external onlyOwner {\n        uint256 length = tokenIds.length;\n        uint256 prizePoolLength = _prizePool.length;\n        for (uint256 i; i < length; ++i) {\n            for (uint256 j; j < prizePoolLength; ++j) {\n                if (_prizePool[j].tokenId == uint48(tokenIds[i])) {\n                    revert TokenInPrizePool();\n                }\n            }\n        }\n\n        uint48[] memory tokenIds48 = new uint48[](length);\n        for (uint256 i; i < length; ++i) {\n            tokenIds48[i] = uint48(tokenIds[i]);\n        }\n        _transferWithValidatorCallback(address(beezieCollectibles), address(this), owner(), tokenIds48);\n    }\n\n    function resetEffectivePrizePoolSize() external onlyOwner {\n        effectivePrizePoolSize = _prizePool.length;\n    }\n\n    function incrementEffectivePrizePoolSize(uint256 amount) external onlyOwner {\n        effectivePrizePoolSize += amount;\n    }\n\n    /**\n     * @notice Set the price of the play\n     * @param _price The new price of the play\n     */\n    function setPrice(uint128 _price) public onlyOwner {\n        if (!paused) {\n            revert NotPaused();\n        }\n        price = _price;\n    }\n\n    /**\n     * @notice Get the prize pool\n     * @return The prize pool\n     */\n    function getPrizePool() public view returns (ClawMachineDeposit[] memory) {\n        return _prizePool;\n    }\n\n    /**\n     * @notice Rescue ERC20 tokens from the claw machine\n     * @param token The token to rescue\n     */\n    function rescueERC20(IERC20 token) public onlyOwner {\n        uint256 amount = token.balanceOf(address(this));\n        token.safeTransfer(_msgSender(), amount);\n    }\n\n    /**\n     * @notice Set the Gelato VRF operator\n     * @param _gelatoVRFOperator The new Gelato VRF operator\n     */\n    function setGelatoVRFOperator(address _gelatoVRFOperator) public onlyOwner {\n        gelatoVRFOperator = _gelatoVRFOperator;\n    }\n\n    /**\n     * @notice Set the VRF consumer\n     * @param _vrfConsumer The new VRF consumer\n     */\n    function setVrfConsumer(address _vrfConsumer) public onlyOwner {\n        vrfConsumer = IBeezieVRFConsumer(_vrfConsumer);\n    }\n\n    //----------------------------------\n    // Internal\n    //----------------------------------\n\n    /**\n     * @notice Callback function for the randomness\n     * @param randomNumbers The random numbers\n     * @param user The user who played\n     */\n    function fulfillRandomness(uint256[] calldata randomNumbers, uint256 requestRandomNumber, address user) external {\n        require(msg.sender == address(vrfConsumer), InvalidSender());\n        uint256 times = randomNumbers.length;\n        require(times == playTimes[user][requestRandomNumber], InvalidRandomNumbers());\n\n        uint48[] memory tokenIds = new uint48[](randomNumbers.length);\n        for (uint256 i; i < times; ++i) {\n            uint256 index = randomNumbers[i] % _prizePool.length;\n            ClawMachineDeposit memory prize = _prizePool[index];\n            _swapAndPop(index);\n            tokenIds[i] = prize.tokenId;\n            emit Won(user, prize.tokenId, prize.swapValue);\n        }\n\n        _transferWithValidatorCallback(address(beezieCollectibles), address(this), user, tokenIds);\n\n        emit Played(user, price * times);\n    }\n\n    /**\n     * @notice Play the claw machine\n     * @param user The user to play for\n     * @param times The number of times to play\n     * @param signature Backend signature to verify play is allowed\n     */\n    function _play(address user, uint8 times, bytes calldata signature) internal whenActive {\n        require(!beezieCollectibles.isBlacklisted(user), UserBlacklisted());\n        require(effectivePrizePoolSize >= times, NoPrizes());\n        require(times > 0, InvalidTimes());\n\n        uint256 nonce = playNonce[user]++;\n        bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(PLAY_TYPEHASH, user, times, nonce)));\n        if (!SignatureChecker.isValidSignatureNow(owner(), digest, signature)) {\n            revert InvalidSignature();\n        }\n\n        effectivePrizePoolSize -= times;\n\n        playTimes[user][vrfConsumer.requestRandomNumber(user, times)] = times;\n    }\n\n    function _transferWithValidatorCallback(address token, address from, address to, uint48[] memory tokenIds)\n        internal\n    {\n        factory.beforeTransfer(token);\n        if (token == address(beezieCollectibles)) {\n            beezieCollectibles.bulkTransferFrom(from, to, tokenIds);\n        } else {\n            for (uint256 i; i < tokenIds.length; ++i) {\n                IERC721(token).transferFrom(from, to, tokenIds[i]);\n            }\n        }\n        factory.afterTransfer(token);\n    }\n\n    //----------------------------------\n    // ERC2771ContextUpgradeable OVERRIDES\n    //----------------------------------\n\n    function _msgSender() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (address) {\n        return ERC2771ContextUpgradeable._msgSender();\n    }\n\n    function _msgData() internal view override(ContextUpgradeable, ERC2771ContextUpgradeable) returns (bytes calldata) {\n        return ERC2771ContextUpgradeable._msgData();\n    }\n\n    function _contextSuffixLength()\n        internal\n        view\n        override(ContextUpgradeable, ERC2771ContextUpgradeable)\n        returns (uint256)\n    {\n        return ERC2771ContextUpgradeable._contextSuffixLength();\n    }\n\n    function _swapAndPop(uint256 index) internal {\n        if (index < _prizePool.length - 1) {\n            _prizePool[index] = _prizePool[_prizePool.length - 1];\n        }\n        _prizePool.pop();\n    }\n\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/draft-IERC1822.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev ERC-1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822Proxiable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"},"dependencies/openzeppelin-contracts/contracts/proxy/ERC1967/ERC1967Utils.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (proxy/ERC1967/ERC1967Utils.sol)\n\npragma solidity ^0.8.21;\n\nimport {IBeacon} from \"../beacon/IBeacon.sol\";\nimport {IERC1967} from \"../../interfaces/IERC1967.sol\";\nimport {Address} from \"../../utils/Address.sol\";\nimport {StorageSlot} from \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This library provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[ERC-1967] slots.\n */\nlibrary ERC1967Utils {\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev The `implementation` of the proxy is invalid.\n     */\n    error ERC1967InvalidImplementation(address implementation);\n\n    /**\n     * @dev The `admin` of the proxy is invalid.\n     */\n    error ERC1967InvalidAdmin(address admin);\n\n    /**\n     * @dev The `beacon` of the proxy is invalid.\n     */\n    error ERC1967InvalidBeacon(address beacon);\n\n    /**\n     * @dev An upgrade function sees `msg.value > 0` that may be lost.\n     */\n    error ERC1967NonPayable();\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        if (newImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(newImplementation);\n        }\n        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Performs implementation upgrade with additional setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) internal {\n        _setImplementation(newImplementation);\n        emit IERC1967.Upgraded(newImplementation);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(newImplementation, data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by ERC-1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function getAdmin() internal view returns (address) {\n        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the ERC-1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        if (newAdmin == address(0)) {\n            revert ERC1967InvalidAdmin(address(0));\n        }\n        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {IERC1967-AdminChanged} event.\n     */\n    function changeAdmin(address newAdmin) internal {\n        emit IERC1967.AdminChanged(getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is the keccak-256 hash of \"eip1967.proxy.beacon\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the ERC-1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        if (newBeacon.code.length == 0) {\n            revert ERC1967InvalidBeacon(newBeacon);\n        }\n\n        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;\n\n        address beaconImplementation = IBeacon(newBeacon).implementation();\n        if (beaconImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(beaconImplementation);\n        }\n    }\n\n    /**\n     * @dev Change the beacon and trigger a setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-BeaconUpgraded} event.\n     *\n     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since\n     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for\n     * efficiency.\n     */\n    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {\n        _setBeacon(newBeacon);\n        emit IERC1967.BeaconUpgraded(newBeacon);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract\n     * if an upgrade doesn't perform an initialization call.\n     */\n    function _checkNonPayable() private {\n        if (msg.value > 0) {\n            revert ERC1967NonPayable();\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Panic.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Helper library for emitting standardized panic codes.\n *\n * ```solidity\n * contract Example {\n *      using Panic for uint256;\n *\n *      // Use any of the declared internal constants\n *      function foo() { Panic.GENERIC.panic(); }\n *\n *      // Alternatively\n *      function foo() { Panic.panic(Panic.GENERIC); }\n * }\n * ```\n *\n * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].\n *\n * _Available since v5.1._\n */\n// slither-disable-next-line unused-state\nlibrary Panic {\n    /// @dev generic / unspecified error\n    uint256 internal constant GENERIC = 0x00;\n    /// @dev used by the assert() builtin\n    uint256 internal constant ASSERT = 0x01;\n    /// @dev arithmetic underflow or overflow\n    uint256 internal constant UNDER_OVERFLOW = 0x11;\n    /// @dev division or modulo by zero\n    uint256 internal constant DIVISION_BY_ZERO = 0x12;\n    /// @dev enum conversion error\n    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;\n    /// @dev invalid encoding in storage\n    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;\n    /// @dev empty array pop\n    uint256 internal constant EMPTY_ARRAY_POP = 0x31;\n    /// @dev array out of bounds access\n    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;\n    /// @dev resource error (too large allocation or too large array)\n    uint256 internal constant RESOURCE_ERROR = 0x41;\n    /// @dev calling invalid internal function\n    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;\n\n    /// @dev Reverts with a panic code. Recommended to use with\n    /// the internal constants with predefined codes.\n    function panic(uint256 code) internal pure {\n        assembly (\"memory-safe\") {\n            mstore(0x00, 0x4e487b71)\n            mstore(0x20, code)\n            revert(0x1c, 0x24)\n        }\n    }\n}\n"},"lib/ERC721A-Upgradeable/contracts/IERC721AUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.2.3\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721AUpgradeable {\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error ApprovalCallerNotOwnerNorApproved();\n\n    /**\n     * The token does not exist.\n     */\n    error ApprovalQueryForNonexistentToken();\n\n    /**\n     * Cannot query the balance for the zero address.\n     */\n    error BalanceQueryForZeroAddress();\n\n    /**\n     * Cannot mint to the zero address.\n     */\n    error MintToZeroAddress();\n\n    /**\n     * The quantity of tokens minted must be more than zero.\n     */\n    error MintZeroQuantity();\n\n    /**\n     * The token does not exist.\n     */\n    error OwnerQueryForNonexistentToken();\n\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error TransferCallerNotOwnerNorApproved();\n\n    /**\n     * The token must be owned by `from`.\n     */\n    error TransferFromIncorrectOwner();\n\n    /**\n     * Cannot safely transfer to a contract that does not implement the\n     * ERC721Receiver interface.\n     */\n    error TransferToNonERC721ReceiverImplementer();\n\n    /**\n     * Cannot transfer to the zero address.\n     */\n    error TransferToZeroAddress();\n\n    /**\n     * The token does not exist.\n     */\n    error URIQueryForNonexistentToken();\n\n    /**\n     * The `quantity` minted with ERC2309 exceeds the safety limit.\n     */\n    error MintERC2309QuantityExceedsLimit();\n\n    /**\n     * The `extraData` cannot be set on an unintialized ownership slot.\n     */\n    error OwnershipNotInitializedForExtraData();\n\n    // =============================================================\n    //                            STRUCTS\n    // =============================================================\n\n    struct TokenOwnership {\n        // The address of the owner.\n        address addr;\n        // Stores the start time of ownership with minimal overhead for tokenomics.\n        uint64 startTimestamp;\n        // Whether the token has been burned.\n        bool burned;\n        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n        uint24 extraData;\n    }\n\n    // =============================================================\n    //                         TOKEN COUNTERS\n    // =============================================================\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() external view returns (uint256);\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n    // =============================================================\n    //                            IERC721\n    // =============================================================\n\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables\n     * (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`,\n     * checking first that contract recipients are aware of the ERC721 protocol\n     * to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be have been allowed to move\n     * this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes calldata data\n    ) external payable;\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n     * whenever possible.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external payable;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool _approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n\n    // =============================================================\n    //                           IERC2309\n    // =============================================================\n\n    /**\n     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n     * (inclusive) is transferred from `from` to `to`, as defined in the\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n     *\n     * See {_mintERC2309} for more details.\n     */\n    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n"},"lib/ERC721A-Upgradeable/contracts/ERC721AStorage.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.0;\n\nlibrary ERC721AStorage {\n    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).\n    struct TokenApprovalRef {\n        address value;\n    }\n\n    struct Layout {\n        // =============================================================\n        //                            STORAGE\n        // =============================================================\n\n        // The next token ID to be minted.\n        uint256 _currentIndex;\n        // The number of tokens burned.\n        uint256 _burnCounter;\n        // Token name\n        string _name;\n        // Token symbol\n        string _symbol;\n        // Mapping from token ID to ownership details\n        // An empty struct value does not necessarily mean the token is unowned.\n        // See {_packedOwnershipOf} implementation for details.\n        //\n        // Bits Layout:\n        // - [0..159]   `addr`\n        // - [160..223] `startTimestamp`\n        // - [224]      `burned`\n        // - [225]      `nextInitialized`\n        // - [232..255] `extraData`\n        mapping(uint256 => uint256) _packedOwnerships;\n        // Mapping owner address to address data.\n        //\n        // Bits Layout:\n        // - [0..63]    `balance`\n        // - [64..127]  `numberMinted`\n        // - [128..191] `numberBurned`\n        // - [192..255] `aux`\n        mapping(address => uint256) _packedAddressData;\n        // Mapping from token ID to approved address.\n        mapping(uint256 => ERC721AStorage.TokenApprovalRef) _tokenApprovals;\n        // Mapping from owner to operator approvals\n        mapping(address => mapping(address => bool)) _operatorApprovals;\n    }\n\n    bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.ERC721A');\n\n    function layout() internal pure returns (Layout storage l) {\n        bytes32 slot = STORAGE_SLOT;\n        assembly {\n            l.slot := slot\n        }\n    }\n}\n"},"lib/ERC721A-Upgradeable/contracts/ERC721A__InitializableStorage.sol":{"content":"// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is a base storage for the  initialization function for upgradeable diamond facet contracts\n **/\n\nlibrary ERC721A__InitializableStorage {\n    struct Layout {\n        /*\n         * Indicates that the contract has been initialized.\n         */\n        bool _initialized;\n        /*\n         * Indicates that the contract is in the process of being initialized.\n         */\n        bool _initializing;\n    }\n\n    bytes32 internal constant STORAGE_SLOT = keccak256('ERC721A.contracts.storage.initializable.facet');\n\n    function layout() internal pure returns (Layout storage l) {\n        bytes32 slot = STORAGE_SLOT;\n        assembly {\n            l.slot := slot\n        }\n    }\n}\n"},"src/interfaces/permit2/IEIP712.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\ninterface IEIP712 {\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},"dependencies/openzeppelin-contracts/contracts/access/IAccessControl.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (access/IAccessControl.sol)\n\npragma solidity >=0.8.4;\n\n/**\n * @dev External interface of AccessControl declared to support ERC-165 detection.\n */\ninterface IAccessControl {\n    /**\n     * @dev The `account` is missing a role.\n     */\n    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);\n\n    /**\n     * @dev The caller of a function is not the expected one.\n     *\n     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.\n     */\n    error AccessControlBadConfirmation();\n\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted to signal this.\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).\n     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `callerConfirmation`.\n     */\n    function renounceRole(bytes32 role, address callerConfirmation) external;\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Create2.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Create2.sol)\n\npragma solidity ^0.8.20;\n\nimport {Errors} from \"./Errors.sol\";\nimport {LowLevelCall} from \"./LowLevelCall.sol\";\n\n/**\n * @dev Helper to make usage of the `CREATE2` EVM opcode easier and safer.\n * `CREATE2` can be used to compute in advance the address where a smart\n * contract will be deployed, which allows for interesting new mechanisms known\n * as 'counterfactual interactions'.\n *\n * See the https://eips.ethereum.org/EIPS/eip-1014#motivation[EIP] for more\n * information.\n */\nlibrary Create2 {\n    /**\n     * @dev There's no code to deploy.\n     */\n    error Create2EmptyBytecode();\n\n    /**\n     * @dev Deploys a contract using `CREATE2`. The address where the contract\n     * will be deployed can be known in advance via {computeAddress}.\n     *\n     * The bytecode for a contract can be obtained from Solidity with\n     * `type(contractName).creationCode`.\n     *\n     * Requirements:\n     *\n     * - `bytecode` must not be empty.\n     * - `salt` must have not been used for `bytecode` already.\n     * - the factory must have a balance of at least `amount`.\n     * - if `amount` is non-zero, `bytecode` must have a `payable` constructor.\n     */\n    function deploy(uint256 amount, bytes32 salt, bytes memory bytecode) internal returns (address addr) {\n        if (address(this).balance < amount) {\n            revert Errors.InsufficientBalance(address(this).balance, amount);\n        }\n        if (bytecode.length == 0) {\n            revert Create2EmptyBytecode();\n        }\n        assembly (\"memory-safe\") {\n            addr := create2(amount, add(bytecode, 0x20), mload(bytecode), salt)\n        }\n        if (addr == address(0)) {\n            if (LowLevelCall.returnDataSize() == 0) {\n                revert Errors.FailedDeployment();\n            } else {\n                LowLevelCall.bubbleRevert();\n            }\n        }\n    }\n\n    /**\n     * @dev Returns the address where a contract will be stored if deployed via {deploy}. Any change in the\n     * `bytecodeHash` or `salt` will result in a new destination address.\n     */\n    function computeAddress(bytes32 salt, bytes32 bytecodeHash) internal view returns (address) {\n        return computeAddress(salt, bytecodeHash, address(this));\n    }\n\n    /**\n     * @dev Returns the address where a contract will be stored if deployed via {deploy} from a contract located at\n     * `deployer`. If `deployer` is this contract's address, returns the same value as {computeAddress}.\n     */\n    function computeAddress(bytes32 salt, bytes32 bytecodeHash, address deployer) internal pure returns (address addr) {\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40) // Get free memory pointer\n\n            // |                     | ↓ ptr ...  ↓ ptr + 0x0B (start) ...  ↓ ptr + 0x20 ...  ↓ ptr + 0x40 ...   |\n            // |---------------------|---------------------------------------------------------------------------|\n            // | bytecodeHash        |                                                        CCCCCCCCCCCCC...CC |\n            // | salt                |                                      BBBBBBBBBBBBB...BB                   |\n            // | deployer            | 000000...0000AAAAAAAAAAAAAAAAAAA...AA                                     |\n            // | 0xFF                |            FF                                                             |\n            // |---------------------|---------------------------------------------------------------------------|\n            // | memory              | 000000...00FFAAAAAAAAAAAAAAAAAAA...AABBBBBBBBBBBBB...BBCCCCCCCCCCCCC...CC |\n            // | keccak(start, 0x55) |            ↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑ |\n\n            mstore(add(ptr, 0x40), bytecodeHash)\n            mstore(add(ptr, 0x20), salt)\n            mstore(ptr, deployer) // Right-aligned with 12 preceding garbage bytes\n            let start := add(ptr, 0x0b) // The hashed data starts at the final garbage byte which we will set to 0xff\n            mstore8(start, 0xff)\n            addr := and(keccak256(start, 0x55), 0xffffffffffffffffffffffffffffffffffffffff)\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Errors.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of common custom errors used in multiple contracts\n *\n * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.\n * It is recommended to avoid relying on the error API for critical functionality.\n *\n * _Available since v5.1._\n */\nlibrary Errors {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error InsufficientBalance(uint256 balance, uint256 needed);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedCall();\n\n    /**\n     * @dev The deployment failed.\n     */\n    error FailedDeployment();\n\n    /**\n     * @dev A necessary precompile is missing.\n     */\n    error MissingPrecompile(address);\n}\n"},"dependencies/openzeppelin-contracts-upgradeable/contracts/utils/cryptography/EIP712Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/EIP712.sol)\n\npragma solidity ^0.8.24;\n\nimport {MessageHashUtils} from \"@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol\";\nimport {IERC5267} from \"@openzeppelin/contracts/interfaces/IERC5267.sol\";\nimport {Initializable} from \"@openzeppelin/contracts/proxy/utils/Initializable.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose\n * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract\n * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to\n * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * NOTE: The upgradeable version of this contract does not use an immutable cache and recomputes the domain separator\n * each time {_domainSeparatorV4} is called. That is cheaper than accessing a cached version in cold storage.\n */\nabstract contract EIP712Upgradeable is Initializable, IERC5267 {\n    bytes32 private constant TYPE_HASH =\n        keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\");\n\n    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712\n    struct EIP712Storage {\n        /// @custom:oz-renamed-from _HASHED_NAME\n        bytes32 _hashedName;\n        /// @custom:oz-renamed-from _HASHED_VERSION\n        bytes32 _hashedVersion;\n\n        string _name;\n        string _version;\n    }\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.EIP712\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;\n\n    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {\n        assembly {\n            $.slot := EIP712StorageLocation\n        }\n    }\n\n    /**\n     * @dev Initializes the domain separator and parameter caches.\n     *\n     * The meaning of `name` and `version` is specified in\n     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:\n     *\n     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n     * - `version`: the current major version of the signing domain.\n     *\n     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n     * contract upgrade].\n     */\n    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {\n        __EIP712_init_unchained(name, version);\n    }\n\n    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {\n        EIP712Storage storage $ = _getEIP712Storage();\n        $._name = name;\n        $._version = version;\n\n        // Reset prior values in storage if upgrading\n        $._hashedName = 0;\n        $._hashedVersion = 0;\n    }\n\n    /**\n     * @dev Returns the domain separator for the current chain.\n     */\n    function _domainSeparatorV4() internal view returns (bytes32) {\n        return _buildDomainSeparator();\n    }\n\n    function _buildDomainSeparator() private view returns (bytes32) {\n        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));\n    }\n\n    /**\n     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n     * function returns the hash of the fully encoded EIP712 message for this domain.\n     *\n     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n     *\n     * ```solidity\n     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n     *     keccak256(\"Mail(address to,string contents)\"),\n     *     mailTo,\n     *     keccak256(bytes(mailContents))\n     * )));\n     * address signer = ECDSA.recover(digest, signature);\n     * ```\n     */\n    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);\n    }\n\n    /// @inheritdoc IERC5267\n    function eip712Domain()\n        public\n        view\n        virtual\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        )\n    {\n        EIP712Storage storage $ = _getEIP712Storage();\n        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized\n        // and the EIP712 domain is not reliable, as it will be missing name and version.\n        require($._hashedName == 0 && $._hashedVersion == 0, \"EIP712: Uninitialized\");\n\n        return (\n            hex\"0f\", // 01111\n            _EIP712Name(),\n            _EIP712Version(),\n            block.chainid,\n            address(this),\n            bytes32(0),\n            new uint256[](0)\n        );\n    }\n\n    /**\n     * @dev The name parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Name() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._name;\n    }\n\n    /**\n     * @dev The version parameter for the EIP712 domain.\n     *\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\n     * are a concern.\n     */\n    function _EIP712Version() internal view virtual returns (string memory) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        return $._version;\n    }\n\n    /**\n     * @dev The hash of the name parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.\n     */\n    function _EIP712NameHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory name = _EIP712Name();\n        if (bytes(name).length > 0) {\n            return keccak256(bytes(name));\n        } else {\n            // If the name is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.\n            bytes32 hashedName = $._hashedName;\n            if (hashedName != 0) {\n                return hashedName;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n\n    /**\n     * @dev The hash of the version parameter for the EIP712 domain.\n     *\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.\n     */\n    function _EIP712VersionHash() internal view returns (bytes32) {\n        EIP712Storage storage $ = _getEIP712Storage();\n        string memory version = _EIP712Version();\n        if (bytes(version).length > 0) {\n            return keccak256(bytes(version));\n        } else {\n            // If the version is empty, the contract may have been upgraded without initializing the new storage.\n            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.\n            bytes32 hashedVersion = $._hashedVersion;\n            if (hashedVersion != 0) {\n                return hashedVersion;\n            } else {\n                return keccak256(\"\");\n            }\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also applies here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},"dependencies/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},"dependencies/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        if (!_safeTransfer(token, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        if (!_safeTransferFrom(token, from, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n        return _safeTransfer(token, to, value, false);\n    }\n\n    /**\n     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n        return _safeTransferFrom(token, from, to, value, false);\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        if (!_safeApprove(token, spender, value, false)) {\n            if (!_safeApprove(token, spender, 0, true)) revert SafeERC20FailedOperation(address(token));\n            if (!_safeApprove(token, spender, value, true)) revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Oppositely, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transfer(to, value)` call, relaxing the requirement on the return value: the\n     * return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransfer(IERC20 token, address to, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.transfer.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(to, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transferFrom(from, to, value)` call, relaxing the requirement on the return\n     * value: the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param from The sender of the tokens\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value,\n        bool bubble\n    ) private returns (bool success) {\n        bytes4 selector = IERC20.transferFrom.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(from, shr(96, not(0))))\n            mstore(0x24, and(to, shr(96, not(0))))\n            mstore(0x44, value)\n            success := call(gas(), token, 0, 0x00, 0x64, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n            mstore(0x60, 0)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.approve(spender, value)` call, relaxing the requirement on the return value:\n     * the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param spender The spender of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeApprove(IERC20 token, address spender, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.approve.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(spender, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/token/ERC721/IERC721.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC721/IERC721.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC165} from \"../../utils/introspection/IERC165.sol\";\n\n/**\n * @dev Required interface of an ERC-721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC-721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC-721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n"},"src/interfaces/IBeezieClawMachine.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {ClawMachineDeposit, Permit, Permit2Permit} from \"@/structs/Structs.sol\";\n\ninterface IBeezieClawMachine {\n    // Getters / view\n    function price() external view returns (uint128);\n    function playToken() external view returns (address);\n    function playNonce(address user) external view returns (uint256);\n    function getPrizePool() external view returns (ClawMachineDeposit[] memory);\n\n    // Play (operator / user)\n    function playFor(address user, uint8 times, bytes calldata signature) external;\n    function playWithPermitFor(address user, uint8 times, Permit memory permit, bytes calldata signature) external;\n    function playWithPermit2For(address user, uint8 times, Permit2Permit memory permit2Permit, bytes calldata signature)\n        external;\n\n    // Owner\n    function deposit(uint256[] calldata tokenIds, uint128[] calldata swapValues, address tokensOwner) external;\n    function stop() external;\n    function togglePause() external;\n    function withdrawItems(uint256 quantity) external;\n    function withdrawItemsNonPrizePool(uint256[] calldata tokenIds) external;\n    function setPrice(uint128 _price) external;\n    function rescueERC20(IERC20 token) external;\n}\n"},"src/interfaces/IBeezieVRFConsumer.sol":{"content":"// SPDX-License-Identifier: MIT LICENSE\n\npragma solidity ^0.8.26;\n\ninterface IBeezieVRFConsumer {\n    //----------------------------------\n    // Structs\n    //----------------------------------\n    struct RandomnessRequest {\n        address claw;\n        address user;\n        uint8 times;\n        uint256[] randomNumbers;\n    }\n    /**\n     * @notice Request a random number\n     * @param user The user to request a random number for\n     * @param times The number of times to play\n     * @return requestId The request id\n     */\n    function requestRandomNumber(address user, uint8 times) external returns (uint256 requestId);\n\n    /**\n     * @notice Get a request\n     * @param requestId The request id\n     * @return request The request\n     */\n    function getRequest(uint256 requestId) external view returns (RandomnessRequest memory request);\n}\n"},"dependencies/openzeppelin-contracts/contracts/proxy/beacon/IBeacon.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (proxy/beacon/IBeacon.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {UpgradeableBeacon} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC1967.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1967.sol)\n\npragma solidity >=0.4.11;\n\n/**\n * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.\n */\ninterface IERC1967 {\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/Address.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\nimport {Errors} from \"./Errors.sol\";\nimport {LowLevelCall} from \"./LowLevelCall.sol\";\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert Errors.InsufficientBalance(address(this).balance, amount);\n        }\n        if (LowLevelCall.callNoReturn(recipient, amount, \"\")) {\n            // call successful, nothing to do\n            return;\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {Errors.FailedCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        bool success = LowLevelCall.callNoReturn(target, value, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        bool success = LowLevelCall.staticcallNoReturn(target, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        bool success = LowLevelCall.delegatecallNoReturn(target, data);\n        if (success && (LowLevelCall.returnDataSize() > 0 || target.code.length > 0)) {\n            return LowLevelCall.returnData();\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (LowLevelCall.returnDataSize() > 0) {\n            LowLevelCall.bubbleRevert();\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case\n     * of an unsuccessful call.\n     *\n     * NOTE: This function is DEPRECATED and may be removed in the next major release.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        // only check if target is a contract if the call was successful and the return data is empty\n        // otherwise we already know that it was a contract\n        if (success && (returndata.length > 0 || target.code.length > 0)) {\n            return returndata;\n        } else if (success) {\n            revert AddressEmptyCode(target);\n        } else if (returndata.length > 0) {\n            LowLevelCall.bubbleRevert(returndata);\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {Errors.FailedCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else if (returndata.length > 0) {\n            LowLevelCall.bubbleRevert(returndata);\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/StorageSlot.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC-1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct Int256Slot {\n        int256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Int256Slot` with member `value` located at `slot`.\n     */\n    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/utils/LowLevelCall.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/LowLevelCall.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library of low level call functions that implement different calling strategies to deal with the return data.\n *\n * WARNING: Using this library requires an advanced understanding of Solidity and how the EVM works. It is recommended\n * to use the {Address} library instead.\n */\nlibrary LowLevelCall {\n    /// @dev Performs a Solidity function call using a low level `call` and ignoring the return data.\n    function callNoReturn(address target, bytes memory data) internal returns (bool success) {\n        return callNoReturn(target, 0, data);\n    }\n\n    /// @dev Same as {callNoReturn}, but allows to specify the value to be sent in the call.\n    function callNoReturn(address target, uint256 value, bytes memory data) internal returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `call` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function callReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        return callReturn64Bytes(target, 0, data);\n    }\n\n    /// @dev Same as {callReturnBytes32Pair}, but allows to specify the value to be sent in the call.\n    function callReturn64Bytes(\n        address target,\n        uint256 value,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := call(gas(), target, value, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `staticcall` and ignoring the return data.\n    function staticcallNoReturn(address target, bytes memory data) internal view returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `staticcall` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function staticcallReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal view returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := staticcall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `delegatecall` and ignoring the return data.\n    function delegatecallNoReturn(address target, bytes memory data) internal returns (bool success) {\n        assembly (\"memory-safe\") {\n            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x00)\n        }\n    }\n\n    /// @dev Performs a Solidity function call using a low level `delegatecall` and returns the first 64 bytes of the result\n    /// in the scratch space of memory. Useful for functions that return a tuple of single-word values.\n    ///\n    /// WARNING: Do not assume that the results are zero if `success` is false. Memory can be already allocated\n    /// and this function doesn't zero it out.\n    function delegatecallReturn64Bytes(\n        address target,\n        bytes memory data\n    ) internal returns (bool success, bytes32 result1, bytes32 result2) {\n        assembly (\"memory-safe\") {\n            success := delegatecall(gas(), target, add(data, 0x20), mload(data), 0x00, 0x40)\n            result1 := mload(0x00)\n            result2 := mload(0x20)\n        }\n    }\n\n    /// @dev Returns the size of the return data buffer.\n    function returnDataSize() internal pure returns (uint256 size) {\n        assembly (\"memory-safe\") {\n            size := returndatasize()\n        }\n    }\n\n    /// @dev Returns a buffer containing the return data from the last call.\n    function returnData() internal pure returns (bytes memory result) {\n        assembly (\"memory-safe\") {\n            result := mload(0x40)\n            mstore(result, returndatasize())\n            returndatacopy(add(result, 0x20), 0x00, returndatasize())\n            mstore(0x40, add(result, add(0x20, returndatasize())))\n        }\n    }\n\n    /// @dev Revert with the return data from the last call.\n    function bubbleRevert() internal pure {\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            returndatacopy(fmp, 0x00, returndatasize())\n            revert(fmp, returndatasize())\n        }\n    }\n\n    function bubbleRevert(bytes memory returndata) internal pure {\n        assembly (\"memory-safe\") {\n            revert(add(returndata, 0x20), mload(returndata))\n        }\n    }\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC5267.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC5267.sol)\n\npragma solidity >=0.4.16;\n\ninterface IERC5267 {\n    /**\n     * @dev MAY be emitted to signal that the domain could have changed.\n     */\n    event EIP712DomainChanged();\n\n    /**\n     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712\n     * signature.\n     */\n    function eip712Domain()\n        external\n        view\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        );\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC1363.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"},"dependencies/openzeppelin-contracts/contracts/interfaces/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"}},"matchId":"29847105","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-05-26T06:08:20Z","match":"exact_match","chainId":"8453","address":"0x386FA12D090355c4bc1b97c6De3D80726C260393"}