{"sources":{"Venusia.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Venusia.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Venusia - 6677 Cheerful Venus sprite girl with golden cloud skin and astronaut collar before glowing Venus for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 318 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 6677 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Venusia is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 6677;\n    uint256 public constant FREE_SUPPLY = 318;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Venusia\", \"VENUSIA\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Venusia\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Venus sprite girl\", \"Venus sprite girl\", \"Venus sprite girl\", \"Venus sprite girl\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Astronaut collar\", \"Astronaut collar\", \"Astronaut collar\", \"Astronaut collar\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Warm orange rim light\", \"Warm orange rim light\", \"Warm orange rim light\", \"Warm orange rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Glowing Venus\", \"Glowing Venus\", \"Glowing Venus\", \"Glowing Venus\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Venusia #', id.toString(),\n            '\",\"description\":\"Venusia is 6677 Cheerful Venus sprite girl with golden cloud skin and astronaut collar before glowing Venus. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Venusia\",\"description\":\"Venusia is 6677 Cheerful Venus sprite girl with golden cloud skin and astronaut collar before glowing Venus. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58047573","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T06:57:45Z","match":"exact_match","chainId":"56","address":"0xf621ed47bFce124069Ea1D701522AD0c92bfe91D"}