{"sources":{"Mummyhive.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Mummyhive.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Mummyhive - 600 Cute mummy bee wrapped in glowing honeycomb bandages with a tiny witch hat on an orange-purple gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 600 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 600 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Mummyhive is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 600;\n    uint256 public constant FREE_SUPPLY = 600;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Mummyhive\", \"MUMMYHIVE\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Mummyhive\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Mummy bee\", \"Mummy bee\", \"Mummy bee\", \"Mummy bee\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Honeycomb bandages and witch hat\", \"Honeycomb bandages and witch hat\", \"Honeycomb bandages and witch hat\", \"Honeycomb bandages and witch hat\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Amber rim light\", \"Amber rim light\", \"Amber rim light\", \"Amber rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Orange-purple gradient\", \"Orange-purple gradient\", \"Orange-purple gradient\", \"Orange-purple gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Mummyhive #', id.toString(),\n            '\",\"description\":\"Mummyhive is 600 Cute mummy bee wrapped in glowing honeycomb bandages with a tiny witch hat on an orange-purple gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Mummyhive\",\"description\":\"Mummyhive is 600 Cute mummy bee wrapped in glowing honeycomb bandages with a tiny witch hat on an orange-purple gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58262062","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T20:40:28Z","match":"exact_match","chainId":"56","address":"0xf45fE22B3a9A748c59A7099e2E7B69f41216b1cd"}