{"sources":{"Marsito.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Marsito.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Marsito - 3344 Cheerful Mars boy with crater freckles and astronaut collar under a dusty red sky for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 305 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 3344 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Marsito is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 3344;\n    uint256 public constant FREE_SUPPLY = 305;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Marsito\", \"MARSITO\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Marsito\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Mars boy\", \"Mars boy\", \"Mars boy\", \"Mars boy\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Astronaut suit\", \"Astronaut suit\", \"Astronaut suit\", \"Astronaut suit\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Golden rim light\", \"Golden rim light\", \"Golden rim light\", \"Golden rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Red Mars sky\", \"Red Mars sky\", \"Red Mars sky\", \"Red Mars sky\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Marsito #', id.toString(),\n            '\",\"description\":\"Marsito is 3344 Cheerful Mars boy with crater freckles and astronaut collar under a dusty red sky. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Marsito\",\"description\":\"Marsito is 3344 Cheerful Mars boy with crater freckles and astronaut collar under a dusty red sky. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58039495","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T04:56:33Z","match":"exact_match","chainId":"56","address":"0xeF4efd901c2AF4c9e974f30F02Ba4572e5F88117"}