{"sources":{"Nodeneon.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Nodeneon.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Nodeneon - 555 Sleek cyberpunk android with neon pink and cyan visor and a smile in a rainy neon city for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 555 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 555 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Nodeneon is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 555;\n    uint256 public constant FREE_SUPPLY = 555;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Nodeneon\", \"NODENEON\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Nodeneon\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Android agent\", \"Android agent\", \"Android agent\", \"Android agent\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Neon visor\", \"Neon visor\", \"Neon visor\", \"Neon visor\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Cyan rim light\", \"Cyan rim light\", \"Cyan rim light\", \"Cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Accent\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Nodeneon #', id.toString(),\n            '\",\"description\":\"Nodeneon is 555 Sleek cyberpunk android with neon pink and cyan visor and a smile in a rainy neon city. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Nodeneon\",\"description\":\"Nodeneon is 555 Sleek cyberpunk android with neon pink and cyan visor and a smile in a rainy neon city. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58365295","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-04T12:47:50Z","match":"exact_match","chainId":"56","address":"0xE54873f96A7a73FA1E39fe6C8B69aB178c87b3D6"}