{"sources":{"Cogentbyte.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Cogentbyte.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Cogentbyte - 5555 Chrome robot cat with cyan circuit whiskers and holographic monocle on a blue-teal gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 5555 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 5555 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Cogentbyte is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 5555;\n    uint256 public constant FREE_SUPPLY = 5555;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Cogentbyte\", \"COGENTBYTE\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Cogentbyte\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Robot cat\", \"Robot cat\", \"Robot cat\", \"Robot cat\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Circuit whiskers\", \"Circuit whiskers\", \"Circuit whiskers\", \"Circuit whiskers\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Cyan rim light\", \"Cyan rim light\", \"Cyan rim light\", \"Cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Blue-teal gradient\", \"Blue-teal gradient\", \"Blue-teal gradient\", \"Blue-teal gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Cogentbyte #', id.toString(),\n            '\",\"description\":\"Cogentbyte is 5555 Chrome robot cat with cyan circuit whiskers and holographic monocle on a blue-teal gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Cogentbyte\",\"description\":\"Cogentbyte is 5555 Chrome robot cat with cyan circuit whiskers and holographic monocle on a blue-teal gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58208989","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T11:32:51Z","match":"exact_match","chainId":"56","address":"0xde94d86FDd2EEb66AaEF837e43134a5D505DC39D"}