{"sources":{"Chiphiveowl.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Chiphiveowl.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Chiphiveowl - 800 Chrome robot owl with glowing amber eyes and cyan honeycomb circuit chest on a navy-teal gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 800 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 800 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Chiphiveowl is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 800;\n    uint256 public constant FREE_SUPPLY = 800;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Chiphiveowl\", \"CHIPHIVEOWL\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Chiphiveowl\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Chrome robot owl\", \"Chrome robot owl\", \"Chrome robot owl\", \"Chrome robot owl\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Honeycomb circuit chest\", \"Honeycomb circuit chest\", \"Honeycomb circuit chest\", \"Honeycomb circuit chest\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Teal-orange rim light\", \"Teal-orange rim light\", \"Teal-orange rim light\", \"Teal-orange rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Navy-teal gradient\", \"Navy-teal gradient\", \"Navy-teal gradient\", \"Navy-teal gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Chiphiveowl #', id.toString(),\n            '\",\"description\":\"Chiphiveowl is 800 Chrome robot owl with glowing amber eyes and cyan honeycomb circuit chest on a navy-teal gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Chiphiveowl\",\"description\":\"Chiphiveowl is 800 Chrome robot owl with glowing amber eyes and cyan honeycomb circuit chest on a navy-teal gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58239368","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T16:44:38Z","match":"exact_match","chainId":"56","address":"0xc36FD9884ac52eB406B80D4E91328B39251F54Ab"}