{"sources":{"Holotron.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Holotron.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Holotron - 1551 Friendly ceramic robot engineer with glowing cyan eyes and floating holo rings in a futuristic lab for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 311 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 1551 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Holotron is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 1551;\n    uint256 public constant FREE_SUPPLY = 311;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Holotron\", \"HOLOTRON\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Holotron\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Robot engineer\", \"Robot engineer\", \"Robot engineer\", \"Robot engineer\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Orange tool harness\", \"Orange tool harness\", \"Orange tool harness\", \"Orange tool harness\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Teal orange rim light\", \"Teal orange rim light\", \"Teal orange rim light\", \"Teal orange rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Holo lab bokeh\", \"Holo lab bokeh\", \"Holo lab bokeh\", \"Holo lab bokeh\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Holotron #', id.toString(),\n            '\",\"description\":\"Holotron is 1551 Friendly ceramic robot engineer with glowing cyan eyes and floating holo rings in a futuristic lab. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Holotron\",\"description\":\"Holotron is 1551 Friendly ceramic robot engineer with glowing cyan eyes and floating holo rings in a futuristic lab. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58027542","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T01:54:19Z","match":"exact_match","chainId":"56","address":"0xA3bdab7105371D05Def2162Fca700235477DD1F8"}