{"sources":{"Yydspanda.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Yydspanda.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Yydspanda - 1616 Cute panda spirit in a tiny golden scarf on a red-gold gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 1292 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 1616 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Yydspanda is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 1616;\n    uint256 public constant FREE_SUPPLY = 1292;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Yydspanda\", \"YYDSPANDA\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Yydspanda\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Panda spirit\", \"Panda spirit\", \"Panda spirit\", \"Panda spirit\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Golden scarf\", \"Golden scarf\", \"Golden scarf\", \"Golden scarf\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Warm rim light\", \"Warm rim light\", \"Warm rim light\", \"Warm rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Red-gold gradient\", \"Red-gold gradient\", \"Red-gold gradient\", \"Red-gold gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Yydspanda #', id.toString(),\n            '\",\"description\":\"Yydspanda is 1616 Cute panda spirit in a tiny golden scarf on a red-gold gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Yydspanda\",\"description\":\"Yydspanda is 1616 Cute panda spirit in a tiny golden scarf on a red-gold gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58070961","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T11:27:03Z","match":"exact_match","chainId":"56","address":"0x9421429eF629db0175323b6F14804AE6b3528883"}