{"sources":{"Photonode.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Photonode.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Photonode - 700 Friendly robot bust with glowing blue fiber-optic node lights on its head and soft rim light on a deep navy gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 700 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 700 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Photonode is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 700;\n    uint256 public constant FREE_SUPPLY = 700;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Photonode\", \"PHOTONODE\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Photonode\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Fiber-optic robot\", \"Fiber-optic robot\", \"Fiber-optic robot\", \"Fiber-optic robot\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Blue node lights\", \"Blue node lights\", \"Blue node lights\", \"Blue node lights\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Soft rim light\", \"Soft rim light\", \"Soft rim light\", \"Soft rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Navy gradient\", \"Navy gradient\", \"Navy gradient\", \"Navy gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Accent\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Photonode #', id.toString(),\n            '\",\"description\":\"Photonode is 700 Friendly robot bust with glowing blue fiber-optic node lights on its head and soft rim light on a deep navy gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Photonode\",\"description\":\"Photonode is 700 Friendly robot bust with glowing blue fiber-optic node lights on its head and soft rim light on a deep navy gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58361029","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-04T12:01:39Z","match":"exact_match","chainId":"56","address":"0x8df8327B50d8eb188BFd204e444343E28670323c"}