{"sources":{"Chromagent.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Chromagent.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Chromagent - 4444 Cyberpunk hacker cat agent with glowing magenta visor and neon cyan hooded jacket on a magenta-blue city gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 4444 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 4444 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Chromagent is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 4444;\n    uint256 public constant FREE_SUPPLY = 4444;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Chromagent\", \"CHROMAGENT\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Chromagent\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Hacker cat agent\", \"Hacker cat agent\", \"Hacker cat agent\", \"Hacker cat agent\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Neon cyan hoodie\", \"Neon cyan hoodie\", \"Neon cyan hoodie\", \"Neon cyan hoodie\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Magenta-cyan rim light\", \"Magenta-cyan rim light\", \"Magenta-cyan rim light\", \"Magenta-cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Magenta-blue city gradient\", \"Magenta-blue city gradient\", \"Magenta-blue city gradient\", \"Magenta-blue city gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Chromagent #', id.toString(),\n            '\",\"description\":\"Chromagent is 4444 Cyberpunk hacker cat agent with glowing magenta visor and neon cyan hooded jacket on a magenta-blue city gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Chromagent\",\"description\":\"Chromagent is 4444 Cyberpunk hacker cat agent with glowing magenta visor and neon cyan hooded jacket on a magenta-blue city gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58181715","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T06:35:54Z","match":"exact_match","chainId":"56","address":"0x895087300b81956e3242Be7132d55dB90Af0DEBD"}