{"sources":{"Neptuno.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Neptuno.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Neptuno - 2288 Cheerful Neptune kid with storm swirl skin and cloud hair in a deep blue nebula for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 326 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 2288 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Neptuno is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 2288;\n    uint256 public constant FREE_SUPPLY = 326;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Neptuno\", \"NEPTUNO\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Neptuno\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Neptune kid\", \"Neptune kid\", \"Neptune kid\", \"Neptune kid\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Silver ring collar\", \"Silver ring collar\", \"Silver ring collar\", \"Silver ring collar\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Cool cyan rim light\", \"Cool cyan rim light\", \"Cool cyan rim light\", \"Cool cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Blue nebula\", \"Blue nebula\", \"Blue nebula\", \"Blue nebula\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Neptuno #', id.toString(),\n            '\",\"description\":\"Neptuno is 2288 Cheerful Neptune kid with storm swirl skin and cloud hair in a deep blue nebula. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Neptuno\",\"description\":\"Neptuno is 2288 Cheerful Neptune kid with storm swirl skin and cloud hair in a deep blue nebula. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58035383","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T03:54:24Z","match":"exact_match","chainId":"56","address":"0x6e2dFd975dA6A54d18d1816029C6657454E61c9a"}