{"sources":{"Marsagentis.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Marsagentis.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Marsagentis - 555 Cute astronaut secret agent with glossy helmet reflecting a red Mars planet and tiny orbiting moons on a purple-orange gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 555 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 555 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Marsagentis is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 555;\n    uint256 public constant FREE_SUPPLY = 555;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Marsagentis\", \"MARSAGENTIS\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Marsagentis\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Astronaut agent\", \"Astronaut agent\", \"Astronaut agent\", \"Astronaut agent\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Glossy visor helmet\", \"Glossy visor helmet\", \"Glossy visor helmet\", \"Glossy visor helmet\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Orange-violet rim light\", \"Orange-violet rim light\", \"Orange-violet rim light\", \"Orange-violet rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Purple-orange gradient\", \"Purple-orange gradient\", \"Purple-orange gradient\", \"Purple-orange gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Marsagentis #', id.toString(),\n            '\",\"description\":\"Marsagentis is 555 Cute astronaut secret agent with glossy helmet reflecting a red Mars planet and tiny orbiting moons on a purple-orange gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Marsagentis\",\"description\":\"Marsagentis is 555 Cute astronaut secret agent with glossy helmet reflecting a red Mars planet and tiny orbiting moons on a purple-orange gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58249079","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T18:24:24Z","match":"exact_match","chainId":"56","address":"0x6908fb5FB6AE2F62FF2672005b1eD60150C0EBd9"}