{"sources":{"Mummibo.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Mummibo.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Mummibo - 1001 Little mummy kid with a glowing green eye and pumpkin hat in a moonlit pumpkin patch for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 329 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 1001 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Mummibo is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 1001;\n    uint256 public constant FREE_SUPPLY = 329;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Mummibo\", \"MUMMIBO\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Mummibo\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Mummy kid\", \"Mummy kid\", \"Mummy kid\", \"Mummy kid\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Bandages and pumpkin hat\", \"Bandages and pumpkin hat\", \"Bandages and pumpkin hat\", \"Bandages and pumpkin hat\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Candle rim light\", \"Candle rim light\", \"Candle rim light\", \"Candle rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Moonlit pumpkin patch\", \"Moonlit pumpkin patch\", \"Moonlit pumpkin patch\", \"Moonlit pumpkin patch\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Mummibo #', id.toString(),\n            '\",\"description\":\"Mummibo is 1001 Little mummy kid with a glowing green eye and pumpkin hat in a moonlit pumpkin patch. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Mummibo\",\"description\":\"Mummibo is 1001 Little mummy kid with a glowing green eye and pumpkin hat in a moonlit pumpkin patch. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58035400","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T03:54:36Z","match":"exact_match","chainId":"56","address":"0x666830a348414D3E8B2d341D1ec9D562211034af"}