{"sources":{"Saturnode.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Saturnode.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Saturnode - 4000 Ringed planet creature with glowing network node orbs on a purple-gold gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 4000 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 4000 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Saturnode is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 4000;\n    uint256 public constant FREE_SUPPLY = 4000;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Saturnode\", \"SATURNODE\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Saturnode\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Ringed planet\", \"Ringed planet\", \"Ringed planet\", \"Ringed planet\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Node orbs\", \"Node orbs\", \"Node orbs\", \"Node orbs\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Gold rim light\", \"Gold rim light\", \"Gold rim light\", \"Gold rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Purple-gold gradient\", \"Purple-gold gradient\", \"Purple-gold gradient\", \"Purple-gold gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Saturnode #', id.toString(),\n            '\",\"description\":\"Saturnode is 4000 Ringed planet creature with glowing network node orbs on a purple-gold gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Saturnode\",\"description\":\"Saturnode is 4000 Ringed planet creature with glowing network node orbs on a purple-gold gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58210343","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T11:47:13Z","match":"exact_match","chainId":"56","address":"0x6124b3ae64adA7b73581CcD01fEF89e583E8742c"}