{"sources":{"Neonnodefox.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Neonnodefox.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Neonnodefox - 4000 Cyberpunk fox with neon cyan visor and glowing node crystal on a purple-blue gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 4000 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 4000 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Neonnodefox is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 4000;\n    uint256 public constant FREE_SUPPLY = 4000;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Neonnodefox\", \"NEONNODEFOX\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Neonnodefox\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Cyber fox\", \"Cyber fox\", \"Cyber fox\", \"Cyber fox\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Neon visor\", \"Neon visor\", \"Neon visor\", \"Neon visor\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Magenta-cyan rim light\", \"Magenta-cyan rim light\", \"Magenta-cyan rim light\", \"Magenta-cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Purple-blue gradient\", \"Purple-blue gradient\", \"Purple-blue gradient\", \"Purple-blue gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Neonnodefox #', id.toString(),\n            '\",\"description\":\"Neonnodefox is 4000 Cyberpunk fox with neon cyan visor and glowing node crystal on a purple-blue gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Neonnodefox\",\"description\":\"Neonnodefox is 4000 Cyberpunk fox with neon cyan visor and glowing node crystal on a purple-blue gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58216087","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T12:49:33Z","match":"exact_match","chainId":"56","address":"0x579f24c07936616607987F0EB449779907eB9E2b"}