{"sources":{"Neonhare.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Neonhare.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Neonhare - 1166 Cyber hare girl with glowing cyan ears and chrome neon jacket in a rainy neon city for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 307 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 1166 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Neonhare is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 1166;\n    uint256 public constant FREE_SUPPLY = 307;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Neonhare\", \"NEONHARE\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Neonhare\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Cyber hare girl\", \"Cyber hare girl\", \"Cyber hare girl\", \"Cyber hare girl\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Chrome neon jacket\", \"Chrome neon jacket\", \"Chrome neon jacket\", \"Chrome neon jacket\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Magenta cyan rim light\", \"Magenta cyan rim light\", \"Magenta cyan rim light\", \"Magenta cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Neonhare #', id.toString(),\n            '\",\"description\":\"Neonhare is 1166 Cyber hare girl with glowing cyan ears and chrome neon jacket in a rainy neon city. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Neonhare\",\"description\":\"Neonhare is 1166 Cyber hare girl with glowing cyan ears and chrome neon jacket in a rainy neon city. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58043501","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T05:56:08Z","match":"exact_match","chainId":"56","address":"0x553484EC13486cAec4cdB884B9953e381dd1d66B"}