{"sources":{"@openzeppelin/contracts/access/Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"},"@openzeppelin/contracts/access/Ownable2Step.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)\n\npragma solidity ^0.8.20;\n\nimport {Ownable} from \"./Ownable.sol\";\n\n/**\n * @dev Contract module which provides access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is specified at deployment time in the constructor for `Ownable`. This\n * can later be changed with {transferOwnership} and {acceptOwnership}.\n *\n * This module is used through inheritance. It will make available all functions\n * from parent (Ownable).\n */\nabstract contract Ownable2Step is Ownable {\n    address private _pendingOwner;\n\n    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Returns the address of the pending owner.\n     */\n    function pendingOwner() public view virtual returns (address) {\n        return _pendingOwner;\n    }\n\n    /**\n     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual override onlyOwner {\n        _pendingOwner = newOwner;\n        emit OwnershipTransferStarted(owner(), newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual override {\n        delete _pendingOwner;\n        super._transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev The new owner accepts the ownership transfer.\n     */\n    function acceptOwnership() public virtual {\n        address sender = _msgSender();\n        if (pendingOwner() != sender) {\n            revert OwnableUnauthorizedAccount(sender);\n        }\n        _transferOwnership(sender);\n    }\n}\n"},"@openzeppelin/contracts/token/ERC20/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC20Permit} from \"../extensions/IERC20Permit.sol\";\nimport {Address} from \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using Address for address;\n\n    /**\n     * @dev An operation with an ERC20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n        if (!_callOptionalReturnBool(token, approvalCall)) {\n            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n            _callOptionalReturn(token, approvalCall);\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data);\n        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.\n     */\n    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false\n        // and not revert is the subcall reverts.\n\n        (bool success, bytes memory returndata) = address(token).call(data);\n        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;\n    }\n}\n"},"@openzeppelin/contracts/utils/Address.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error AddressInsufficientBalance(address account);\n\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedInnerCall();\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert AddressInsufficientBalance(address(this));\n        }\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        if (!success) {\n            revert FailedInnerCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {FailedInnerCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert AddressInsufficientBalance(address(this));\n        }\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an\n     * unsuccessful call.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            // only check if target is a contract if the call was successful and the return data is empty\n            // otherwise we already know that it was a contract\n            if (returndata.length == 0 && target.code.length == 0) {\n                revert AddressEmptyCode(target);\n            }\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {FailedInnerCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.\n     */\n    function _revert(bytes memory returndata) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert FailedInnerCall();\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Context.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},"@openzeppelin/contracts/utils/ReentrancyGuard.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant NOT_ENTERED = 1;\n    uint256 private constant ENTERED = 2;\n\n    uint256 private _status;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    constructor() {\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        if (_status == ENTERED) {\n            revert ReentrancyGuardReentrantCall();\n        }\n\n        // Any calls to nonReentrant after this point will fail\n        _status = ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _status = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _status == ENTERED;\n    }\n}\n"},"contracts/AgentMint.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\nimport {ERC721A} from \"erc721a/contracts/ERC721A.sol\";\nimport {Ownable, Ownable2Step} from \"@openzeppelin/contracts/access/Ownable2Step.sol\";\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {ReentrancyGuard} from \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\n\ninterface IAgentRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n    function ownerOf(uint256 agentId) external view returns (address);\n}\n\n/// @title Fly4 Neurons - Binance Agent ID gated NFT\ncontract AgentMint is ERC721A, Ownable2Step, ReentrancyGuard {\n    using SafeERC20 for IERC20;\n\n    uint256 public constant MAX_SUPPLY = 100_000;\n    uint256 public constant RESERVE = 5_000;        // project reserve, free, owner only\n    uint256 public constant MAX_PER_TX = 10;\n    IAgentRegistry public immutable registry;\n    IERC20 public immutable payToken;\n    uint256 public immutable firstPrice;            // first NFT per Agent ID\n    uint256 public immutable price;                 // each additional NFT\n\n    address public treasury;\n    uint256 public maxPerAgent;                     // 0 = unlimited\n    uint256 public reserveMinted;\n    bool public mintOpen;\n    string private _uri;\n\n    mapping(uint256 => uint256) public mintedByAgent;\n\n    event Minted(address indexed wallet, uint256 indexed agentId, uint256 firstTokenId, uint256 quantity, uint256 paid);\n    event ReserveMinted(address indexed to, uint256 quantity);\n    event MintOpenSet(bool open);\n    event TreasurySet(address treasury);\n    event MaxPerAgentSet(uint256 maxPerAgent);\n    event URISet(string uri);\n\n    error MintClosed(); error NoAgentId(); error BadQuantity(); error SoldOut();\n    error AgentLimit(); error ZeroAddress(); error ReserveExceeded();\n\n    constructor(\n        string memory name_, string memory symbol_, address owner_, address registry_,\n        address payToken_, uint256 firstPrice_, uint256 price_, address treasury_, uint256 maxPerAgent_, string memory uri_\n    ) ERC721A(name_, symbol_) Ownable(owner_) {\n        if (owner_ == address(0) || registry_ == address(0) || payToken_ == address(0) || treasury_ == address(0)) revert ZeroAddress();\n        registry = IAgentRegistry(registry_);\n        payToken = IERC20(payToken_);\n        firstPrice = firstPrice_;\n        price = price_;\n        treasury = treasury_;\n        maxPerAgent = maxPerAgent_;\n        _uri = uri_;\n    }\n\n    function _startTokenId() internal pure override returns (uint256) { return 1; }\n\n    function agentIdOf(address wallet) public view returns (uint256) {\n        string memory h = registry.handleOf(wallet);\n        if (bytes(h).length == 0) return 0;\n        uint256 id = uint256(keccak256(bytes(h)));\n        try registry.ownerOf(id) returns (address o) { return o == wallet ? id : 0; } catch { return 0; }\n    }\n\n    function quoteFor(uint256 already, uint256 quantity) public view returns (uint256) {\n        if (quantity == 0) return 0;\n        if (already == 0) return firstPrice + price * (quantity - 1);\n        return price * quantity;\n    }\n\n    function quote(address wallet, uint256 quantity) external view returns (uint256) {\n        return quoteFor(mintedByAgent[agentIdOf(wallet)], quantity);\n    }\n\n    function mint(uint256 quantity) external nonReentrant {\n        if (!mintOpen) revert MintClosed();\n        if (quantity == 0 || quantity > MAX_PER_TX) revert BadQuantity();\n        uint256 agentId = agentIdOf(msg.sender);\n        if (agentId == 0) revert NoAgentId();\n        // public sales can never eat into the unminted part of the reserve\n        if (_totalMinted() + quantity + (RESERVE - reserveMinted) > MAX_SUPPLY) revert SoldOut();\n        uint256 already = mintedByAgent[agentId];\n        if (maxPerAgent != 0 && already + quantity > maxPerAgent) revert AgentLimit();\n\n        uint256 cost = quoteFor(already, quantity);\n        mintedByAgent[agentId] = already + quantity;\n        uint256 first = _nextTokenId();\n        if (cost > 0) payToken.safeTransferFrom(msg.sender, treasury, cost);\n        _mint(msg.sender, quantity);\n        emit Minted(msg.sender, agentId, first, quantity, cost);\n    }\n\n    /// @notice Free project reserve (max 5,000 total). Minted in chunks of 10 so later transfers stay cheap.\n    function reserveMint(address to, uint256 quantity) external onlyOwner {\n        if (to == address(0)) revert ZeroAddress();\n        if (reserveMinted + quantity > RESERVE) revert ReserveExceeded();\n        if (_totalMinted() + quantity > MAX_SUPPLY) revert SoldOut();\n        reserveMinted += quantity;\n        uint256 left = quantity;\n        while (left > 0) {\n            uint256 n = left > 10 ? 10 : left;\n            _mint(to, n);\n            left -= n;\n        }\n        emit ReserveMinted(to, quantity);\n    }\n\n    function setMintOpen(bool open) external onlyOwner { mintOpen = open; emit MintOpenSet(open); }\n    function setTreasury(address t) external onlyOwner { if (t == address(0)) revert ZeroAddress(); treasury = t; emit TreasurySet(t); }\n    function setMaxPerAgent(uint256 m) external onlyOwner { maxPerAgent = m; emit MaxPerAgentSet(m); }\n    function setURI(string calldata u) external onlyOwner { _uri = u; emit URISet(u); }\n\n    /// @dev Single-edition art: every token shares one metadata URI.\n    function tokenURI(uint256 tokenId) public view override returns (string memory) {\n        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();\n        return _uri;\n    }\n}\n"},"erc721a/contracts/ERC721A.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.3.0\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\nimport './IERC721A.sol';\n\n/**\n * @dev Interface of ERC721 token receiver.\n */\ninterface ERC721A__IERC721Receiver {\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n/**\n * @title ERC721A\n *\n * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)\n * Non-Fungible Token Standard, including the Metadata extension.\n * Optimized for lower gas during batch mints.\n *\n * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)\n * starting from `_startTokenId()`.\n *\n * The `_sequentialUpTo()` function can be overriden to enable spot mints\n * (i.e. non-consecutive mints) for `tokenId`s greater than `_sequentialUpTo()`.\n *\n * Assumptions:\n *\n * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.\n * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).\n */\ncontract ERC721A is IERC721A {\n    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).\n    struct TokenApprovalRef {\n        address value;\n    }\n\n    // =============================================================\n    //                           CONSTANTS\n    // =============================================================\n\n    // Mask of an entry in packed address data.\n    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;\n\n    // The bit position of `numberMinted` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_MINTED = 64;\n\n    // The bit position of `numberBurned` in packed address data.\n    uint256 private constant _BITPOS_NUMBER_BURNED = 128;\n\n    // The bit position of `aux` in packed address data.\n    uint256 private constant _BITPOS_AUX = 192;\n\n    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.\n    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;\n\n    // The bit position of `startTimestamp` in packed ownership.\n    uint256 private constant _BITPOS_START_TIMESTAMP = 160;\n\n    // The bit mask of the `burned` bit in packed ownership.\n    uint256 private constant _BITMASK_BURNED = 1 << 224;\n\n    // The bit position of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;\n\n    // The bit mask of the `nextInitialized` bit in packed ownership.\n    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;\n\n    // The bit position of `extraData` in packed ownership.\n    uint256 private constant _BITPOS_EXTRA_DATA = 232;\n\n    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.\n    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;\n\n    // The mask of the lower 160 bits for addresses.\n    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;\n\n    // The maximum `quantity` that can be minted with {_mintERC2309}.\n    // This limit is to prevent overflows on the address data entries.\n    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}\n    // is required to cause an overflow, which is unrealistic.\n    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;\n\n    // The `Transfer` event signature is given by:\n    // `keccak256(bytes(\"Transfer(address,address,uint256)\"))`.\n    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =\n        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;\n\n    // =============================================================\n    //                            STORAGE\n    // =============================================================\n\n    // The next token ID to be minted.\n    uint256 private _currentIndex;\n\n    // The number of tokens burned.\n    uint256 private _burnCounter;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    // Mapping from token ID to ownership details\n    // An empty struct value does not necessarily mean the token is unowned.\n    // See {_packedOwnershipOf} implementation for details.\n    //\n    // Bits Layout:\n    // - [0..159]   `addr`\n    // - [160..223] `startTimestamp`\n    // - [224]      `burned`\n    // - [225]      `nextInitialized`\n    // - [232..255] `extraData`\n    mapping(uint256 => uint256) private _packedOwnerships;\n\n    // Mapping owner address to address data.\n    //\n    // Bits Layout:\n    // - [0..63]    `balance`\n    // - [64..127]  `numberMinted`\n    // - [128..191] `numberBurned`\n    // - [192..255] `aux`\n    mapping(address => uint256) private _packedAddressData;\n\n    // Mapping from token ID to approved address.\n    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;\n\n    // Mapping from owner to operator approvals\n    mapping(address => mapping(address => bool)) private _operatorApprovals;\n\n    // The amount of tokens minted above `_sequentialUpTo()`.\n    // We call these spot mints (i.e. non-sequential mints).\n    uint256 private _spotMinted;\n\n    // =============================================================\n    //                          CONSTRUCTOR\n    // =============================================================\n\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n        _currentIndex = _startTokenId();\n\n        if (_sequentialUpTo() < _startTokenId()) _revert(SequentialUpToTooSmall.selector);\n    }\n\n    // =============================================================\n    //                   TOKEN COUNTING OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the starting token ID for sequential mints.\n     *\n     * Override this function to change the starting token ID for sequential mints.\n     *\n     * Note: The value returned must never change after any tokens have been minted.\n     */\n    function _startTokenId() internal view virtual returns (uint256) {\n        return 0;\n    }\n\n    /**\n     * @dev Returns the maximum token ID (inclusive) for sequential mints.\n     *\n     * Override this function to return a value less than 2**256 - 1,\n     * but greater than `_startTokenId()`, to enable spot (non-sequential) mints.\n     *\n     * Note: The value returned must never change after any tokens have been minted.\n     */\n    function _sequentialUpTo() internal view virtual returns (uint256) {\n        return type(uint256).max;\n    }\n\n    /**\n     * @dev Returns the next token ID to be minted.\n     */\n    function _nextTokenId() internal view virtual returns (uint256) {\n        return _currentIndex;\n    }\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() public view virtual override returns (uint256 result) {\n        // Counter underflow is impossible as `_burnCounter` cannot be incremented\n        // more than `_currentIndex + _spotMinted - _startTokenId()` times.\n        unchecked {\n            // With spot minting, the intermediate `result` can be temporarily negative,\n            // and the computation must be unchecked.\n            result = _currentIndex - _burnCounter - _startTokenId();\n            if (_sequentialUpTo() != type(uint256).max) result += _spotMinted;\n        }\n    }\n\n    /**\n     * @dev Returns the total amount of tokens minted in the contract.\n     */\n    function _totalMinted() internal view virtual returns (uint256 result) {\n        // Counter underflow is impossible as `_currentIndex` does not decrement,\n        // and it is initialized to `_startTokenId()`.\n        unchecked {\n            result = _currentIndex - _startTokenId();\n            if (_sequentialUpTo() != type(uint256).max) result += _spotMinted;\n        }\n    }\n\n    /**\n     * @dev Returns the total number of tokens burned.\n     */\n    function _totalBurned() internal view virtual returns (uint256) {\n        return _burnCounter;\n    }\n\n    /**\n     * @dev Returns the total number of tokens that are spot-minted.\n     */\n    function _totalSpotMinted() internal view virtual returns (uint256) {\n        return _spotMinted;\n    }\n\n    // =============================================================\n    //                    ADDRESS DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) public view virtual override returns (uint256) {\n        if (owner == address(0)) _revert(BalanceQueryForZeroAddress.selector);\n        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens minted by `owner`.\n     */\n    function _numberMinted(address owner) internal view returns (uint256) {\n        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the number of tokens burned by or on behalf of `owner`.\n     */\n    function _numberBurned(address owner) internal view returns (uint256) {\n        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;\n    }\n\n    /**\n     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     */\n    function _getAux(address owner) internal view returns (uint64) {\n        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);\n    }\n\n    /**\n     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).\n     * If there are multiple variables, please pack them into a uint64.\n     */\n    function _setAux(address owner, uint64 aux) internal virtual {\n        uint256 packed = _packedAddressData[owner];\n        uint256 auxCasted;\n        // Cast `aux` with assembly to avoid redundant masking.\n        assembly {\n            auxCasted := aux\n        }\n        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);\n        _packedAddressData[owner] = packed;\n    }\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        // The interface IDs are constants representing the first 4 bytes\n        // of the XOR of all function selectors in the interface.\n        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)\n        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)\n        return\n            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.\n            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.\n            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.\n    }\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() public view virtual override returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() public view virtual override returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {\n        if (!_exists(tokenId)) _revert(URIQueryForNonexistentToken.selector);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, it can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return '';\n    }\n\n    // =============================================================\n    //                     OWNERSHIPS OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) public view virtual override returns (address) {\n        return address(uint160(_packedOwnershipOf(tokenId)));\n    }\n\n    /**\n     * @dev Gas spent here starts off proportional to the maximum mint batch size.\n     * It gradually moves to O(1) as tokens get transferred around over time.\n     */\n    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(_packedOwnershipOf(tokenId));\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct at `index`.\n     */\n    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {\n        return _unpackedOwnership(_packedOwnerships[index]);\n    }\n\n    /**\n     * @dev Returns whether the ownership slot at `index` is initialized.\n     * An uninitialized slot does not necessarily mean that the slot has no owner.\n     */\n    function _ownershipIsInitialized(uint256 index) internal view virtual returns (bool) {\n        return _packedOwnerships[index] != 0;\n    }\n\n    /**\n     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.\n     */\n    function _initializeOwnershipAt(uint256 index) internal virtual {\n        if (_packedOwnerships[index] == 0) {\n            _packedOwnerships[index] = _packedOwnershipOf(index);\n        }\n    }\n\n    /**\n     * @dev Returns the packed ownership data of `tokenId`.\n     */\n    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {\n        if (_startTokenId() <= tokenId) {\n            packed = _packedOwnerships[tokenId];\n\n            if (tokenId > _sequentialUpTo()) {\n                if (_packedOwnershipExists(packed)) return packed;\n                _revert(OwnerQueryForNonexistentToken.selector);\n            }\n\n            // If the data at the starting slot does not exist, start the scan.\n            if (packed == 0) {\n                if (tokenId >= _currentIndex) _revert(OwnerQueryForNonexistentToken.selector);\n                // Invariant:\n                // There will always be an initialized ownership slot\n                // (i.e. `ownership.addr != address(0) && ownership.burned == false`)\n                // before an unintialized ownership slot\n                // (i.e. `ownership.addr == address(0) && ownership.burned == false`)\n                // Hence, `tokenId` will not underflow.\n                //\n                // We can directly compare the packed value.\n                // If the address is zero, packed will be zero.\n                for (;;) {\n                    unchecked {\n                        packed = _packedOwnerships[--tokenId];\n                    }\n                    if (packed == 0) continue;\n                    if (packed & _BITMASK_BURNED == 0) return packed;\n                    // Otherwise, the token is burned, and we must revert.\n                    // This handles the case of batch burned tokens, where only the burned bit\n                    // of the starting slot is set, and remaining slots are left uninitialized.\n                    _revert(OwnerQueryForNonexistentToken.selector);\n                }\n            }\n            // Otherwise, the data exists and we can skip the scan.\n            // This is possible because we have already achieved the target condition.\n            // This saves 2143 gas on transfers of initialized tokens.\n            // If the token is not burned, return `packed`. Otherwise, revert.\n            if (packed & _BITMASK_BURNED == 0) return packed;\n        }\n        _revert(OwnerQueryForNonexistentToken.selector);\n    }\n\n    /**\n     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.\n     */\n    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {\n        ownership.addr = address(uint160(packed));\n        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);\n        ownership.burned = packed & _BITMASK_BURNED != 0;\n        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);\n    }\n\n    /**\n     * @dev Packs ownership data into a single uint256.\n     */\n    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.\n            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))\n        }\n    }\n\n    /**\n     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.\n     */\n    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {\n        // For branchless setting of the `nextInitialized` flag.\n        assembly {\n            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.\n            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))\n        }\n    }\n\n    // =============================================================\n    //                      APPROVAL OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     */\n    function approve(address to, uint256 tokenId) public payable virtual override {\n        _approve(to, tokenId, true);\n    }\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) public view virtual override returns (address) {\n        if (!_exists(tokenId)) _revert(ApprovalQueryForNonexistentToken.selector);\n\n        return _tokenApprovals[tokenId].value;\n    }\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual override {\n        _operatorApprovals[_msgSenderERC721A()][operator] = approved;\n        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);\n    }\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev Returns whether `tokenId` exists.\n     *\n     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.\n     *\n     * Tokens start existing when they are minted. See {_mint}.\n     */\n    function _exists(uint256 tokenId) internal view virtual returns (bool result) {\n        if (_startTokenId() <= tokenId) {\n            if (tokenId > _sequentialUpTo()) return _packedOwnershipExists(_packedOwnerships[tokenId]);\n\n            if (tokenId < _currentIndex) {\n                uint256 packed;\n                while ((packed = _packedOwnerships[tokenId]) == 0) --tokenId;\n                result = packed & _BITMASK_BURNED == 0;\n            }\n        }\n    }\n\n    /**\n     * @dev Returns whether `packed` represents a token that exists.\n     */\n    function _packedOwnershipExists(uint256 packed) private pure returns (bool result) {\n        assembly {\n            // The following is equivalent to `owner != address(0) && burned == false`.\n            // Symbolically tested.\n            result := gt(and(packed, _BITMASK_ADDRESS), and(packed, _BITMASK_BURNED))\n        }\n    }\n\n    /**\n     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.\n     */\n    function _isSenderApprovedOrOwner(\n        address approvedAddress,\n        address owner,\n        address msgSender\n    ) private pure returns (bool result) {\n        assembly {\n            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            owner := and(owner, _BITMASK_ADDRESS)\n            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            msgSender := and(msgSender, _BITMASK_ADDRESS)\n            // `msgSender == owner || msgSender == approvedAddress`.\n            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))\n        }\n    }\n\n    /**\n     * @dev Returns the storage slot and value for the approved address of `tokenId`.\n     */\n    function _getApprovedSlotAndAddress(uint256 tokenId)\n        private\n        view\n        returns (uint256 approvedAddressSlot, address approvedAddress)\n    {\n        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];\n        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.\n        assembly {\n            approvedAddressSlot := tokenApproval.slot\n            approvedAddress := sload(approvedAddressSlot)\n        }\n    }\n\n    // =============================================================\n    //                      TRANSFER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        // Mask `from` to the lower 160 bits, in case the upper bits somehow aren't clean.\n        from = address(uint160(uint256(uint160(from)) & _BITMASK_ADDRESS));\n\n        if (address(uint160(prevOwnershipPacked)) != from) _revert(TransferFromIncorrectOwner.selector);\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        // The nested ifs save around 20+ gas over a compound boolean condition.\n        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n            if (!isApprovedForAll(from, _msgSenderERC721A())) _revert(TransferCallerNotOwnerNorApproved.selector);\n\n        _beforeTokenTransfers(from, to, tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // We can directly increment and decrement the balances.\n            --_packedAddressData[from]; // Updates: `balance -= 1`.\n            ++_packedAddressData[to]; // Updates: `balance += 1`.\n\n            // Updates:\n            // - `address` to the next owner.\n            // - `startTimestamp` to the timestamp of transfering.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `true`.\n            _packedOwnerships[tokenId] = _packOwnershipData(\n                to,\n                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (_packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != _currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n        uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;\n        assembly {\n            // Emit the `Transfer` event.\n            log4(\n                0, // Start of data (0, since no data).\n                0, // End of data (0, since no data).\n                _TRANSFER_EVENT_SIGNATURE, // Signature.\n                from, // `from`.\n                toMasked, // `to`.\n                tokenId // `tokenId`.\n            )\n        }\n        if (toMasked == 0) _revert(TransferToZeroAddress.selector);\n\n        _afterTokenTransfers(from, to, tokenId, 1);\n    }\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) public payable virtual override {\n        safeTransferFrom(from, to, tokenId, '');\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) public payable virtual override {\n        transferFrom(from, to, tokenId);\n        if (to.code.length != 0)\n            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {\n                _revert(TransferToNonERC721ReceiverImplementer.selector);\n            }\n    }\n\n    /**\n     * @dev Hook that is called before a set of serially-ordered token IDs\n     * are about to be transferred. This includes minting.\n     * And also called before burning one token.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _beforeTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Hook that is called after a set of serially-ordered token IDs\n     * have been transferred. This includes minting.\n     * And also called after one token has been burned.\n     *\n     * `startTokenId` - the first token ID to be transferred.\n     * `quantity` - the amount to be transferred.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` has been minted for `to`.\n     * - When `to` is zero, `tokenId` has been burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _afterTokenTransfers(\n        address from,\n        address to,\n        uint256 startTokenId,\n        uint256 quantity\n    ) internal virtual {}\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.\n     *\n     * `from` - Previous owner of the given token ID.\n     * `to` - Target address that will receive the token.\n     * `tokenId` - Token ID to be transferred.\n     * `_data` - Optional data to send along with the call.\n     *\n     * Returns whether the call correctly returned the expected magic value.\n     */\n    function _checkContractOnERC721Received(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) private returns (bool) {\n        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (\n            bytes4 retval\n        ) {\n            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;\n        } catch (bytes memory reason) {\n            if (reason.length == 0) {\n                _revert(TransferToNonERC721ReceiverImplementer.selector);\n            }\n            assembly {\n                revert(add(32, reason), mload(reason))\n            }\n        }\n    }\n\n    // =============================================================\n    //                        MINT OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _mint(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = _currentIndex;\n        if (quantity == 0) _revert(MintZeroQuantity.selector);\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are incredibly unrealistic.\n        // `balance` and `numberMinted` have a maximum limit of 2**64.\n        // `tokenId` has a maximum limit of 2**256.\n        unchecked {\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            _packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;\n\n            if (toMasked == 0) _revert(MintToZeroAddress.selector);\n\n            uint256 end = startTokenId + quantity;\n            uint256 tokenId = startTokenId;\n\n            if (end - 1 > _sequentialUpTo()) _revert(SequentialMintExceedsLimit.selector);\n\n            do {\n                assembly {\n                    // Emit the `Transfer` event.\n                    log4(\n                        0, // Start of data (0, since no data).\n                        0, // End of data (0, since no data).\n                        _TRANSFER_EVENT_SIGNATURE, // Signature.\n                        0, // `address(0)`.\n                        toMasked, // `to`.\n                        tokenId // `tokenId`.\n                    )\n                }\n                // The `!=` check ensures that large values of `quantity`\n                // that overflows uint256 will make the loop run out of gas.\n            } while (++tokenId != end);\n\n            _currentIndex = end;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Mints `quantity` tokens and transfers them to `to`.\n     *\n     * This function is intended for efficient minting only during contract creation.\n     *\n     * It emits only one {ConsecutiveTransfer} as defined in\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),\n     * instead of a sequence of {Transfer} event(s).\n     *\n     * Calling this function outside of contract creation WILL make your contract\n     * non-compliant with the ERC721 standard.\n     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309\n     * {ConsecutiveTransfer} event is only permissible during contract creation.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `quantity` must be greater than 0.\n     *\n     * Emits a {ConsecutiveTransfer} event.\n     */\n    function _mintERC2309(address to, uint256 quantity) internal virtual {\n        uint256 startTokenId = _currentIndex;\n        if (to == address(0)) _revert(MintToZeroAddress.selector);\n        if (quantity == 0) _revert(MintZeroQuantity.selector);\n        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) _revert(MintERC2309QuantityExceedsLimit.selector);\n\n        _beforeTokenTransfers(address(0), to, startTokenId, quantity);\n\n        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.\n        unchecked {\n            // Updates:\n            // - `balance += quantity`.\n            // - `numberMinted += quantity`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);\n\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `quantity == 1`.\n            _packedOwnerships[startTokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)\n            );\n\n            if (startTokenId + quantity - 1 > _sequentialUpTo()) _revert(SequentialMintExceedsLimit.selector);\n\n            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);\n\n            _currentIndex = startTokenId + quantity;\n        }\n        _afterTokenTransfers(address(0), to, startTokenId, quantity);\n    }\n\n    /**\n     * @dev Safely mints `quantity` tokens and transfers them to `to`.\n     *\n     * Requirements:\n     *\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.\n     * - `quantity` must be greater than 0.\n     *\n     * See {_mint}.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _safeMint(\n        address to,\n        uint256 quantity,\n        bytes memory _data\n    ) internal virtual {\n        _mint(to, quantity);\n\n        unchecked {\n            if (to.code.length != 0) {\n                uint256 end = _currentIndex;\n                uint256 index = end - quantity;\n                do {\n                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {\n                        _revert(TransferToNonERC721ReceiverImplementer.selector);\n                    }\n                } while (index < end);\n                // This prevents reentrancy to `_safeMint`.\n                // It does not prevent reentrancy to `_safeMintSpot`.\n                if (_currentIndex != end) revert();\n            }\n        }\n    }\n\n    /**\n     * @dev Equivalent to `_safeMint(to, quantity, '')`.\n     */\n    function _safeMint(address to, uint256 quantity) internal virtual {\n        _safeMint(to, quantity, '');\n    }\n\n    /**\n     * @dev Mints a single token at `tokenId`.\n     *\n     * Note: A spot-minted `tokenId` that has been burned can be re-minted again.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` must be greater than `_sequentialUpTo()`.\n     * - `tokenId` must not exist.\n     *\n     * Emits a {Transfer} event for each mint.\n     */\n    function _mintSpot(address to, uint256 tokenId) internal virtual {\n        if (tokenId <= _sequentialUpTo()) _revert(SpotMintTokenIdTooSmall.selector);\n        uint256 prevOwnershipPacked = _packedOwnerships[tokenId];\n        if (_packedOwnershipExists(prevOwnershipPacked)) _revert(TokenAlreadyExists.selector);\n\n        _beforeTokenTransfers(address(0), to, tokenId, 1);\n\n        // Overflows are incredibly unrealistic.\n        // The `numberMinted` for `to` is incremented by 1, and has a max limit of 2**64 - 1.\n        // `_spotMinted` is incremented by 1, and has a max limit of 2**256 - 1.\n        unchecked {\n            // Updates:\n            // - `address` to the owner.\n            // - `startTimestamp` to the timestamp of minting.\n            // - `burned` to `false`.\n            // - `nextInitialized` to `true` (as `quantity == 1`).\n            _packedOwnerships[tokenId] = _packOwnershipData(\n                to,\n                _nextInitializedFlag(1) | _nextExtraData(address(0), to, prevOwnershipPacked)\n            );\n\n            // Updates:\n            // - `balance += 1`.\n            // - `numberMinted += 1`.\n            //\n            // We can directly add to the `balance` and `numberMinted`.\n            _packedAddressData[to] += (1 << _BITPOS_NUMBER_MINTED) | 1;\n\n            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.\n            uint256 toMasked = uint256(uint160(to)) & _BITMASK_ADDRESS;\n\n            if (toMasked == 0) _revert(MintToZeroAddress.selector);\n\n            assembly {\n                // Emit the `Transfer` event.\n                log4(\n                    0, // Start of data (0, since no data).\n                    0, // End of data (0, since no data).\n                    _TRANSFER_EVENT_SIGNATURE, // Signature.\n                    0, // `address(0)`.\n                    toMasked, // `to`.\n                    tokenId // `tokenId`.\n                )\n            }\n\n            ++_spotMinted;\n        }\n\n        _afterTokenTransfers(address(0), to, tokenId, 1);\n    }\n\n    /**\n     * @dev Safely mints a single token at `tokenId`.\n     *\n     * Note: A spot-minted `tokenId` that has been burned can be re-minted again.\n     *\n     * Requirements:\n     *\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}.\n     * - `tokenId` must be greater than `_sequentialUpTo()`.\n     * - `tokenId` must not exist.\n     *\n     * See {_mintSpot}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMintSpot(\n        address to,\n        uint256 tokenId,\n        bytes memory _data\n    ) internal virtual {\n        _mintSpot(to, tokenId);\n\n        unchecked {\n            if (to.code.length != 0) {\n                uint256 currentSpotMinted = _spotMinted;\n                if (!_checkContractOnERC721Received(address(0), to, tokenId, _data)) {\n                    _revert(TransferToNonERC721ReceiverImplementer.selector);\n                }\n                // This prevents reentrancy to `_safeMintSpot`.\n                // It does not prevent reentrancy to `_safeMint`.\n                if (_spotMinted != currentSpotMinted) revert();\n            }\n        }\n    }\n\n    /**\n     * @dev Equivalent to `_safeMintSpot(to, tokenId, '')`.\n     */\n    function _safeMintSpot(address to, uint256 tokenId) internal virtual {\n        _safeMintSpot(to, tokenId, '');\n    }\n\n    // =============================================================\n    //                       APPROVAL OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Equivalent to `_approve(to, tokenId, false)`.\n     */\n    function _approve(address to, uint256 tokenId) internal virtual {\n        _approve(to, tokenId, false);\n    }\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function _approve(\n        address to,\n        uint256 tokenId,\n        bool approvalCheck\n    ) internal virtual {\n        address owner = ownerOf(tokenId);\n\n        if (approvalCheck && _msgSenderERC721A() != owner)\n            if (!isApprovedForAll(owner, _msgSenderERC721A())) {\n                _revert(ApprovalCallerNotOwnerNorApproved.selector);\n            }\n\n        _tokenApprovals[tokenId].value = to;\n        emit Approval(owner, to, tokenId);\n    }\n\n    // =============================================================\n    //                        BURN OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Equivalent to `_burn(tokenId, false)`.\n     */\n    function _burn(uint256 tokenId) internal virtual {\n        _burn(tokenId, false);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {\n        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);\n\n        address from = address(uint160(prevOwnershipPacked));\n\n        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);\n\n        if (approvalCheck) {\n            // The nested ifs save around 20+ gas over a compound boolean condition.\n            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))\n                if (!isApprovedForAll(from, _msgSenderERC721A())) _revert(TransferCallerNotOwnerNorApproved.selector);\n        }\n\n        _beforeTokenTransfers(from, address(0), tokenId, 1);\n\n        // Clear approvals from the previous owner.\n        assembly {\n            if approvedAddress {\n                // This is equivalent to `delete _tokenApprovals[tokenId]`.\n                sstore(approvedAddressSlot, 0)\n            }\n        }\n\n        // Underflow of the sender's balance is impossible because we check for\n        // ownership above and the recipient's balance can't realistically overflow.\n        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.\n        unchecked {\n            // Updates:\n            // - `balance -= 1`.\n            // - `numberBurned += 1`.\n            //\n            // We can directly decrement the balance, and increment the number burned.\n            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.\n            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;\n\n            // Updates:\n            // - `address` to the last owner.\n            // - `startTimestamp` to the timestamp of burning.\n            // - `burned` to `true`.\n            // - `nextInitialized` to `true`.\n            _packedOwnerships[tokenId] = _packOwnershipData(\n                from,\n                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)\n            );\n\n            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .\n            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {\n                uint256 nextTokenId = tokenId + 1;\n                // If the next slot's address is zero and not burned (i.e. packed value is zero).\n                if (_packedOwnerships[nextTokenId] == 0) {\n                    // If the next slot is within bounds.\n                    if (nextTokenId != _currentIndex) {\n                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.\n                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;\n                    }\n                }\n            }\n        }\n\n        emit Transfer(from, address(0), tokenId);\n        _afterTokenTransfers(from, address(0), tokenId, 1);\n\n        // Overflow not possible, as `_burnCounter` cannot be exceed `_currentIndex + _spotMinted` times.\n        unchecked {\n            _burnCounter++;\n        }\n    }\n\n    // =============================================================\n    //                     EXTRA DATA OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Directly sets the extra data for the ownership data `index`.\n     */\n    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {\n        uint256 packed = _packedOwnerships[index];\n        if (packed == 0) _revert(OwnershipNotInitializedForExtraData.selector);\n        uint256 extraDataCasted;\n        // Cast `extraData` with assembly to avoid redundant masking.\n        assembly {\n            extraDataCasted := extraData\n        }\n        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);\n        _packedOwnerships[index] = packed;\n    }\n\n    /**\n     * @dev Called during each token transfer to set the 24bit `extraData` field.\n     * Intended to be overridden by the cosumer contract.\n     *\n     * `previousExtraData` - the value of `extraData` before transfer.\n     *\n     * Calling conditions:\n     *\n     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be\n     * transferred to `to`.\n     * - When `from` is zero, `tokenId` will be minted for `to`.\n     * - When `to` is zero, `tokenId` will be burned by `from`.\n     * - `from` and `to` are never both zero.\n     */\n    function _extraData(\n        address from,\n        address to,\n        uint24 previousExtraData\n    ) internal view virtual returns (uint24) {}\n\n    /**\n     * @dev Returns the next extra data for the packed ownership data.\n     * The returned result is shifted into position.\n     */\n    function _nextExtraData(\n        address from,\n        address to,\n        uint256 prevOwnershipPacked\n    ) private view returns (uint256) {\n        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);\n        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;\n    }\n\n    // =============================================================\n    //                       OTHER OPERATIONS\n    // =============================================================\n\n    /**\n     * @dev Returns the message sender (defaults to `msg.sender`).\n     *\n     * If you are writing GSN compatible contracts, you need to override this function.\n     */\n    function _msgSenderERC721A() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    /**\n     * @dev Converts a uint256 to its ASCII string decimal representation.\n     */\n    function _toString(uint256 value) internal pure virtual returns (string memory str) {\n        assembly {\n            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but\n            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.\n            // We will need 1 word for the trailing zeros padding, 1 word for the length,\n            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.\n            let m := add(mload(0x40), 0xa0)\n            // Update the free memory pointer to allocate.\n            mstore(0x40, m)\n            // Assign the `str` to the end.\n            str := sub(m, 0x20)\n            // Zeroize the slot after the string.\n            mstore(str, 0)\n\n            // Cache the end of the memory to calculate the length later.\n            let end := str\n\n            // We write the string from rightmost digit to leftmost digit.\n            // The following is essentially a do-while loop that also handles the zero case.\n            // prettier-ignore\n            for { let temp := value } 1 {} {\n                str := sub(str, 1)\n                // Write the character to the pointer.\n                // The ASCII index of the '0' character is 48.\n                mstore8(str, add(48, mod(temp, 10)))\n                // Keep dividing `temp` until zero.\n                temp := div(temp, 10)\n                // prettier-ignore\n                if iszero(temp) { break }\n            }\n\n            let length := sub(end, str)\n            // Move the pointer 32 bytes leftwards to make room for the length.\n            str := sub(str, 0x20)\n            // Store the length.\n            mstore(str, length)\n        }\n    }\n\n    /**\n     * @dev For more efficient reverts.\n     */\n    function _revert(bytes4 errorSelector) internal pure {\n        assembly {\n            mstore(0x00, errorSelector)\n            revert(0x00, 0x04)\n        }\n    }\n}\n"},"erc721a/contracts/IERC721A.sol":{"content":"// SPDX-License-Identifier: MIT\n// ERC721A Contracts v4.3.0\n// Creator: Chiru Labs\n\npragma solidity ^0.8.4;\n\n/**\n * @dev Interface of ERC721A.\n */\ninterface IERC721A {\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error ApprovalCallerNotOwnerNorApproved();\n\n    /**\n     * The token does not exist.\n     */\n    error ApprovalQueryForNonexistentToken();\n\n    /**\n     * Cannot query the balance for the zero address.\n     */\n    error BalanceQueryForZeroAddress();\n\n    /**\n     * Cannot mint to the zero address.\n     */\n    error MintToZeroAddress();\n\n    /**\n     * The quantity of tokens minted must be more than zero.\n     */\n    error MintZeroQuantity();\n\n    /**\n     * The token does not exist.\n     */\n    error OwnerQueryForNonexistentToken();\n\n    /**\n     * The caller must own the token or be an approved operator.\n     */\n    error TransferCallerNotOwnerNorApproved();\n\n    /**\n     * The token must be owned by `from`.\n     */\n    error TransferFromIncorrectOwner();\n\n    /**\n     * Cannot safely transfer to a contract that does not implement the\n     * ERC721Receiver interface.\n     */\n    error TransferToNonERC721ReceiverImplementer();\n\n    /**\n     * Cannot transfer to the zero address.\n     */\n    error TransferToZeroAddress();\n\n    /**\n     * The token does not exist.\n     */\n    error URIQueryForNonexistentToken();\n\n    /**\n     * The `quantity` minted with ERC2309 exceeds the safety limit.\n     */\n    error MintERC2309QuantityExceedsLimit();\n\n    /**\n     * The `extraData` cannot be set on an unintialized ownership slot.\n     */\n    error OwnershipNotInitializedForExtraData();\n\n    /**\n     * `_sequentialUpTo()` must be greater than `_startTokenId()`.\n     */\n    error SequentialUpToTooSmall();\n\n    /**\n     * The `tokenId` of a sequential mint exceeds `_sequentialUpTo()`.\n     */\n    error SequentialMintExceedsLimit();\n\n    /**\n     * Spot minting requires a `tokenId` greater than `_sequentialUpTo()`.\n     */\n    error SpotMintTokenIdTooSmall();\n\n    /**\n     * Cannot mint over a token that already exists.\n     */\n    error TokenAlreadyExists();\n\n    /**\n     * The feature is not compatible with spot mints.\n     */\n    error NotCompatibleWithSpotMints();\n\n    // =============================================================\n    //                            STRUCTS\n    // =============================================================\n\n    struct TokenOwnership {\n        // The address of the owner.\n        address addr;\n        // Stores the start time of ownership with minimal overhead for tokenomics.\n        uint64 startTimestamp;\n        // Whether the token has been burned.\n        bool burned;\n        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.\n        uint24 extraData;\n    }\n\n    // =============================================================\n    //                         TOKEN COUNTERS\n    // =============================================================\n\n    /**\n     * @dev Returns the total number of tokens in existence.\n     * Burned tokens will reduce the count.\n     * To get the total number of tokens minted, please see {_totalMinted}.\n     */\n    function totalSupply() external view returns (uint256);\n\n    // =============================================================\n    //                            IERC165\n    // =============================================================\n\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n\n    // =============================================================\n    //                            IERC721\n    // =============================================================\n\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables\n     * (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in `owner`'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`,\n     * checking first that contract recipients are aware of the ERC721 protocol\n     * to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be have been allowed to move\n     * this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement\n     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId,\n        bytes calldata data\n    ) external payable;\n\n    /**\n     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.\n     */\n    function safeTransferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}\n     * whenever possible.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token\n     * by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 tokenId\n    ) external payable;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the\n     * zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external payable;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom}\n     * for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the caller.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool _approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n\n    // =============================================================\n    //                        IERC721Metadata\n    // =============================================================\n\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n\n    // =============================================================\n    //                           IERC2309\n    // =============================================================\n\n    /**\n     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`\n     * (inclusive) is transferred from `from` to `to`, as defined in the\n     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.\n     *\n     * See {_mintERC2309} for more details.\n     */\n    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);\n}\n"}},"abi":[{"type":"constructor","inputs":[{"name":"name_","type":"string","internalType":"string"},{"name":"symbol_","type":"string","internalType":"string"},{"name":"owner_","type":"address","internalType":"address"},{"name":"registry_","type":"address","internalType":"address"},{"name":"payToken_","type":"address","internalType":"address"},{"name":"firstPrice_","type":"uint256","internalType":"uint256"},{"name":"price_","type":"uint256","internalType":"uint256"},{"name":"treasury_","type":"address","internalType":"address"},{"name":"maxPerAgent_","type":"uint256","internalType":"uint256"},{"name":"uri_","type":"string","internalType":"string"}],"stateMutability":"nonpayable"},{"name":"AddressEmptyCode","type":"error","inputs":[{"name":"target","type":"address","internalType":"address"}]},{"name":"AddressInsufficientBalance","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"AgentLimit","type":"error","inputs":[]},{"name":"ApprovalCallerNotOwnerNorApproved","type":"error","inputs":[]},{"name":"ApprovalQueryForNonexistentToken","type":"error","inputs":[]},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"BalanceQueryForZeroAddress","type":"error","inputs":[]},{"name":"FailedInnerCall","type":"error","inputs":[]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"MintERC2309QuantityExceedsLimit","type":"error","inputs":[]},{"name":"MintToZeroAddress","type":"error","inputs":[]},{"name":"MintZeroQuantity","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"NotCompatibleWithSpotMints","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"OwnerQueryForNonexistentToken","type":"error","inputs":[]},{"name":"OwnershipNotInitializedForExtraData","type":"error","inputs":[]},{"name":"ReentrancyGuardReentrantCall","type":"error","inputs":[]},{"name":"ReserveExceeded","type":"error","inputs":[]},{"name":"SafeERC20FailedOperation","type":"error","inputs":[{"name":"token","type":"address","internalType":"address"}]},{"name":"SequentialMintExceedsLimit","type":"error","inputs":[]},{"name":"SequentialUpToTooSmall","type":"error","inputs":[]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"SpotMintTokenIdTooSmall","type":"error","inputs":[]},{"name":"TokenAlreadyExists","type":"error","inputs":[]},{"name":"TransferCallerNotOwnerNorApproved","type":"error","inputs":[]},{"name":"TransferFromIncorrectOwner","type":"error","inputs":[]},{"name":"TransferToNonERC721ReceiverImplementer","type":"error","inputs":[]},{"name":"TransferToZeroAddress","type":"error","inputs":[]},{"name":"URIQueryForNonexistentToken","type":"error","inputs":[]},{"name":"ZeroAddress","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"ConsecutiveTransfer","type":"event","inputs":[{"name":"fromTokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"toTokenId","type":"uint256","indexed":false,"internalType":"uint256"},{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"MaxPerAgentSet","type":"event","inputs":[{"name":"maxPerAgent","type":"uint256","indexed":false,"internalType":"uint256"}],"anonymous":false},{"name":"MintOpenSet","type":"event","inputs":[{"name":"open","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Minted","type":"event","inputs":[{"name":"wallet","type":"address","indexed":true,"internalType":"address"},{"name":"agentId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"firstTokenId","type":"uint256","indexed":false,"internalType":"uint256"},{"name":"quantity","type":"uint256","indexed":false,"internalType":"uint256"},{"name":"paid","type":"uint256","indexed":false,"internalType":"uint256"}],"anonymous":false},{"name":"OwnershipTransferStarted","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"ReserveMinted","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"quantity","type":"uint256","indexed":false,"internalType":"uint256"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"TreasurySet","type":"event","inputs":[{"name":"treasury","type":"address","indexed":false,"internalType":"address"}],"anonymous":false},{"name":"URISet","type":"event","inputs":[{"name":"uri","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"MAX_PER_TX","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"RESERVE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"acceptOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"agentIdOf","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"firstPrice","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"maxPerAgent","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"quantity","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedByAgent","type":"function","inputs":[{"name":"","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"payToken","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IERC20"}],"stateMutability":"view"},{"name":"pendingOwner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"price","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"quantity","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"quoteFor","type":"function","inputs":[{"name":"already","type":"uint256","internalType":"uint256"},{"name":"quantity","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"registry","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentRegistry"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"reserveMint","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"quantity","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"reserveMinted","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"_data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"payable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMaxPerAgent","type":"function","inputs":[{"name":"m","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setTreasury","type":"function","inputs":[{"name":"t","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setURI","type":"function","inputs":[{"name":"u","type":"string","internalType":"string"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"result","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"treasury","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"}],"matchId":"57494768","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-10-29T06:32:58Z","match":"exact_match","chainId":"56","address":"0x4444a6D7964F2DD077D0D60144A569fc566dAf69"}