{"sources":{"Neonfawn.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Neonfawn.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Neonfawn - 4554 Cyber fawn girl with glowing cyan antlers and pink visor in a rainy neon city for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 310 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 4554 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Neonfawn is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 4554;\n    uint256 public constant FREE_SUPPLY = 310;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Neonfawn\", \"NEONFAWN\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Neonfawn\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Cyber fawn girl\", \"Cyber fawn girl\", \"Cyber fawn girl\", \"Cyber fawn girl\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Chrome techwear\", \"Chrome techwear\", \"Chrome techwear\", \"Chrome techwear\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Magenta cyan rim light\", \"Magenta cyan rim light\", \"Magenta cyan rim light\", \"Magenta cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\", \"Rainy neon city\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Neonfawn #', id.toString(),\n            '\",\"description\":\"Neonfawn is 4554 Cyber fawn girl with glowing cyan antlers and pink visor in a rainy neon city. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Neonfawn\",\"description\":\"Neonfawn is 4554 Cyber fawn girl with glowing cyan antlers and pink visor in a rainy neon city. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58051566","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T07:55:09Z","match":"exact_match","chainId":"56","address":"0x2A93fAfcA568a6ee7d8213F9b31f41ED71D51F55"}