{"sources":{"Neonmind.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Neonmind.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Neonmind - 900 Friendly cyberpunk android with a glowing transparent brain dome on a dark teal-magenta gradient for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 900 free pool lasts (gas only).\n/// Every other mint costs 0.00007 BNB. Max 50 per wallet, 900 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Neonmind is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 900;\n    uint256 public constant FREE_SUPPLY = 900;\n    uint256 public constant FREE_PER_WALLET = 2;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00007 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Neonmind\", \"NEONMIND\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"52494646ac4100005745425056503820a0410000f027019d012a900190013ec154a34ca7a4a7ab2ad64c09601809626ee11b5e7aaa05abeab7b24907e4ff1e1f5bc25f7ef2f37e2f4d7fd5bd46ffb07496f371e6c9ea33fb97a807f46eaa2f440e999b4df6cfed84d7af3873be02efbf7317f2bceffe33d41784ce821fa9bd2d3499a8f6ebe220c284228a21147e5e584b3585abea158ffe9fedf6985a1cb6cdb040a2c1b7b68b7f83ffff80e7d24005f04cc8bf5d997536131c67bcecc92391e38789b86a116901200f741a8d04aca140e3e664701c30c4b666367301ba3bdeeeaf0f6994ea6e8bf9900a3684b15b3e3a7e7bec885ca98628d2cd1e5d859fba89df7f479729fd3e204eb75986b65f693f800230c87fab87f9d5dc4f52e3815b7a8a576de3fe3a6dccf9dc9c8a707e2bd1832b050575dc5fb69141a9585569c18a255e9c3d32b04c50758e4d1094bbc6151d014d689ef559400fd87e11f25875947196816156a9e32377efd12d8f15cb114c405a39c4f2daf88d84981e3e8683e92ba2b2787b0a984a455d47817f79aafb5229467dcd59d15f466ed58a4ec291ed9821ecf4be230e7c0abeb447a83e2d452799e61490e846ba6082694b2014b90ef5707d8da968e914d3fcbb6c99adec25f629414230b25c8fa04dc56ac0d5aed8bf9c29a8cd7e834ff16bc57f49d1b1e3169f967506fbed98506af3a6e8c5ed9b577aa2b9ccb3cc41f3d81233e130f431da5f08ee31e10c5f8c37b5e1c0c0817e3fcb6c3459ecf8732f9327b299dcf8510b53d0863d761ffbfa32c4bbbf97ca93bf155de3e9dd83ce22dd3588b84a7db01f14d5080b61f366fdebe1374d8de337a579d367bcd4b1f5672991d3a5efd8c13a708024ec4c78703d93eaf9548c689e332b2973bc21d3906febc8fd0e94826313dd0cef6054ba3f1dbb34f4c54480a4ace7da856e916769fb4130b29cdf07ecc36f41a2eb75fbcf2438147d567347d4bea8520e8366bdb7fc2dfeed84d5f1fee726c87b3ed664a9ea6d8cb53982fa233df60f597ee2487afd3e98291b41e35feb2ddd9af0c3e88e05f2f8345ccf806fb15caca68077ab6246042162772a41ac5614bf08e04bdb422390464cddffa409883b1cfe9d0ff41c45783e09602066f9a53276b0f86a92f032c5dcd7328f5604f2150bb947dee2b7bfe4afeeaa9b1672ccac9e6606b236b9dc2afb7f70b11ab8579a3b788a8a1ebcfa8766f2a97ee51a91286dacb1030e95e1462357ce9a46fcf630d85bd45202206330162efb88d57834f9211f0493409d001e1c652a3dce8d6056019c437efb5172edf6f5dd30af671864c9e8f21d40d4b48ca93770d306c33648029fe93e43a186d3daf968bd9d710872020d76f9f193cabd3505769354034e90ed6925d78034dd50223776aee4f79aedfc08f62ec6bbfb0d17830e92cd082456762ed45c225cea29897da306eec6429fe7f346be3b1826bd172bac82c5d59c87b14f94b223a9d52be60b131bff0c29aab2770fee257785c48e3d84689df7cb375dcfbde7d0dad2022630e0a005f9cd6a856b98fb42420b8677cab4d8638dcf5d859ea72e8f8245c44dc6d3de3c0c5e8e687cb7249109f9cc56fca073fb176c27981f356b00f746460d3ea3dee0c0b4edf6be1d7f11fbb2ea9b3e1627eae256fb35d399cd2c14adf6800625f28daf2cd60b190df4665c52695e356ffed543d581b312e96c0381cff965a00eb568fa857d2b578bcc946a6c01edfc5c45f64ae86a75531c2ce9bdbe465154d8fd79de7b2ae92b5765d03a0447dd24a84d70da05f3239f1b1094511e7a780fbd9bf63b2966dbc824e21cf3f0547db7c8d54547aacf53ba9f0741c16199ffa8d4d6401c412c8b41e19b25d50fd3adbab818dcda38d717ad03a6e29da8288a74731f6da150ee54f2ede8214fa8e81f85e5f6af25e8b762412cbb5ac66c9661b38630db2caf5211f638f1cd255fe347994fb9504ab457b015c97b7ab50c86ef90972e9400a0de15cc6cdffe9a0bcf21d5bec7ca821635e0fe129967a0346416fbefa2998c71f6189c4377bcc31972e93877abdee048ff26c38cb32e33377f0bf68456120495cf4add9a5233edb3575288d9785f38357ec093f2127cc9bec81e4e5b1e44bfffe5398cbddb14be99b6bd1686e9d44b8cd24b8c4ff8675113fe82a3c4dfbd5413e8f7c11fabf7bcf41e570b254bbc6890ff9928097557e62941652204ce76a6b8d2a9b95643b2aad62da35940c69877aea10f40a6aa91b7eab09a4c2f5b4dba2714967f783769dc1ada6f23a7dc3f929e00d74408d7d19136440d392ed829af4af559298a58526a695b25fa4f24ae9ce23c894b5238fa537153ca6a6c41fbf4e0dcd68b19823064391293b37a1b651f10b42f038c2902e9748725a351cbd65108f0b3debc20a6049d474691abd621ee53d63899017a2eafd6a0ae6c0d4e405bc358fc55d7c4f2dcd8a63c598db05a64e11d8dce7171f0da817bdaea7344149524d7b04401f7c1a96610572ceca08cf1bd20af97cda2d2f2e0d0367e391b9f6c1a772e1dfc4b7ca8f9edc9cf7d3fd69f55956e65c41773bd7e75ca479f089d188391de7a6d0b6790881cebc75d6c478ec32480687a94d9fe9b2d68bd8fe386006bb97c197a8b2aec810c802b1fae3a48403725a6c208952080d832437c68526090b1304741181b1b04d750fe88cbac7cea535c16b62c6a76b5cd2e3f5779dd8fbbd645aeecccf0e9c0bb3d08fe2ff3fe91ce6885f5f70aecdc1039600c02275734e5963fe46d1fe8e57127e1d520b76060a7b2a1a8eb8c91f176a49c3d628cb375f344b68ffbc6760b35c8bf6d87542afcf84333e8247b36a9a3537343b770e3a90ce25273bbbddd5ae765f43e8aa57423327ba70ae8bcb7c9d63577c47b9e9de795f0d8499282e5e3c11b0eaab3d4c384ab89c495d2c462f68639ef67fa9bb832642277cbc5a53878837e189bb7bfb778d9f9a63796fa36ffc2d093e7efdf83b79847994846b047aa9cb9e7d470a7c7dfff375a692c73c87aee860855358976e430725db2b954f2d867187de61142c844f2d4e7934f014bfb7afde9d2f120b8071435a585a1002fadc4029e6e5f9ad4fda60c54cb6f42b19c0d6bbd27a7180bdeca3a3c927d55959865f021b2743daec1a1afa130e03ebf1de70fe03a9bf87923668ffffa5d0b51f50371df3d86dc9b97b5aa96897b98aba0c0cc61b024e878699c2fdb29469bed13b302ce063fbbc422f1a39ab7b64cd3565802ef301e0dc77dae4b42f7ca6546b599f55c4d772248c34aa609de4116af073094091a2a280028b708199a32db71f7bf9c7e9764c09a6e85b3efdffcff1a8d6f608402cff978a1f696e76a4794fe08f20000fee84bcaed1c8cafea349d7d19f6285d72b9894db07cb7cfab91941e5a5b5dc85ec7480cde137f923ac73f47c164ecde3a4d8bc8a52cb5f3e4d1173e93087665ccee84c35059b871c961e312660ef79ce1eaa74d050fabc994eec0a75105ebf4680465cf792be8db7b893238516637d973620d9703905fb75a8145f95e4cb1756910c146c3205c1e8a96570eac7a87367c5a27d557382594ca8af8da40668675907e7ddbafeabe96b7dceaa438aa77d6b24d200d7cb920449064e29613617ba9b4315f52e8f43a8e2d1e808766448a9f09c837aed2f8781300c997c8c160158bca68a53a7c18189d905740b7b2c5a1cf4fa4b2ac3a2e3cb527f7a4812bb15a8ee156fac1eaa6940aab3566e2b76936287bf48713be664ce1779302a0e506928fee45471a3452b0230ec51debc1032cb2cf942252e13f2a13b8056d301faa8d832cf647ebe42cfad2df83524da8cfb41acbcf29e0f140fe9b4e13daa0abf8d95a88894112b020f68f700c705ec39a08277f21967218dd2b0d8249b4120e8bc4393001ce0d53b95fcf533de2a19ea2737aea8be4a10e7460a5f567d4984326f6abe284df8056af4cb3d04a28633b1a6367b18252a702751df9eac1e99684b9fd1951f2ac03d46b23e099586e3f1afd5ecdc4bc02c96ae2bd527e9984fb8213711c34f3c4f65f8fd2358c247cc05db608a5a65099fea34d6aa062158e728b6761e78c4344be64e61dc21fe81be962e096b6877b948c697643701b39d1d25016c91817e4015e578a4556dbc5011747f8f5b7f7d7dc33fadf9da538a55b34bfe5748a62b17b72e115565dc9b40aeb8205a2b4065350e18172fea35c0144ae4a0ee8f30a75b9a642abd272f2f39ef568eb1ea93c6efcdb3475adeae2982280b1546a3ecb5f854c30755fc465c49627011162a3ae1d6e108a010e2c48a5972b06f84faaf3c0499638d4d985ce77c1f83c6b3c2cb9c6aeb1a8bd1c4657518360018e2ab835c2f8e3668be79546063c67bdd6668d25990b9d9c5a5fa2ebacf03f3841ce44429cce32c54938eb114718af06444e91c5aa27988903df87d0d2b2d966263bae8fdbd70695af4a64c78fa120ae7b160a6bdd264705f0425b856a8cb74fcb37b131d0d5ebedafebae7576b6e1b3238edbcc1b41b083794b433f09362039ca100a0d91509ac60e0727d01198b649abf0a541d4a5410dc409984020572550b470912d03540ab976c5e800346b203bae9110ea1b4ffc3dd073f13d86f9b860faad6b07f7f0a90b75f63a8dfde2d57af4b42344e30dbbe20a51b1211c684f5b9376958af26c2d0f1bfca5f434f7453adcff754ed925e0f0e34c309b1a5a3e03fd579e2568f0a6fe8d2eb800318b90f4324f78aa21413691de008cd24039a1018eeb86dc7ae951741e33954992a799d24649ab8f68c34aea5d61ed62381f2e7315854a28de839f1c8a881f6f407f6e0f76c74c8c7a0a0cc6bfa4a86824559f3cd6687f53cb8185759508657ea22e2c0b1010c2d795ad7654cf93fd90ac7ab6c828cbc359ff2bf4aa732ab2869987be6106f4b65e8c3c7e6e45ec37e4b4413a386ef22e08df825e2a5313d21a2ec66f2614b3cc0300529f2c2021c1bd23025a215a032a569cde4e81bf842629517e34dc579d3e7870bfeea516a39df11796b4c2357712fa56cc4cde722ae93ea5241612356e94ffabf46b379e440e3bc0ccde7c4748945fe456cfc94266b06f7d37002ceff4a7291cd3a54a0ab560c16c87bbc202cd9d0a14c6bc0d681007d6381403f0a8b379f516e0043713f56173c7a04b5926f2d38389b00a761d1554209254b1993102b09368a540275a8ee2da738b69d6740d8222daeccb1bcb0dd9abce1874c3ed24ae058a8b4bcb4a83564115495c3ec36f65a79507c62f2f4d4be0b2d5f9f0722fa3b39a7143fc1ef73d351822528fec49b73f5d25946c8680e4feabc0da44516878150b5148dd18c5a7510cb1e66c713fceabfe61ab048e982e52a7f947ab7b47ff9d217b8ad7b76ca69c88552e5828b25c8aa857200a8aaeb8396cc6ac9ed0f9aa86081f1bd5021911a8ce44c9e0c2781584482b69711e37f32413f2860b2c5224c804b601d0526ee0139782f44cda8e403c0072159449ba0a2a64a7ee1efb34e45041ac073eb0bab115b8541c3bbf85feea5c9580bb4b71db3d9f35d3aaaa55cdc75a6f5c2b1fd518ec360357e8ad2295467eeedea761a0f9f1e280463c7fd7ff211785da3f25d5d4dcef92281f097054beae17415e39fc0d975550e69cb1351d0776db92698addde8095c7f91019515d80c3c98d254e3e8899918cdbe97f7c93aec216609d488200ea9d9d0ab36364e2df82c146f83214d3592949c69ece59b9c15e19e65ef863acc0cd44087468d9917154036b8e127a76d895fca152ddad788bfd74673a4d13dbaf5724bb6296c2f083db1fde0392af1f9a878c88b398603363359dc0f3ff3b96935ea4df449f0f50634c51c1984662d4ca5815203092f37faa6cf498323aad48ef0a5954b3ece4908feee94a0b96613dba3fbcef5bc675043f0ad6a9d5a1deaf60ed43f3851f56e5ee995ce2453dd4c6972915ef43629784de15185e75e0a3c29b1717e743aaaf70360e76cabf27e69ad3a11d3c9c3f863c82557f4bb156bbfbcaebf40fe5e8049bfe71d8c8c0005dca465e41c519be7f247f3ef05d0eaf54c44db87bf545514e4b8c5625e0be35d08d46efc0fedbc3c55c492b71349ad202592ddf3faac910df0b0d298d144e43a2bc8746db69090dbf0e3c8516e32e744acc77fcbdb5dd70184f52eb75937acd609547dd36fb0571ad0e5481daebff3972eb6d471e890cca7840248803123be24b5ab6f66c5dac2299334e5ef754422c0e58f75fbd9d6e5532f485ba44283dc29b46a58d50c057c46bd29b5a109abdf5559d71744730661c18b0e9e28ebef790c4568e1669470fb054dd3e0ce3d498853fed3c7cb022ae665042e46249a64d61643542aec68d459d2fbcea3ad863cd37c52db29a738ef62d8a92d5063f7c1b4a0556edd9e80e9f08bf449ef2658f4296f38a08edebc09b385d06815715cddb8fd2d13e6068119a260e2e41586a1ed34862520c1a3872528d8b6d19ab0f824c9dc5a03ade0b38b05541e18e5be2017d8c2881821603b6916b8d8ee018007202fa9c29ad2f9e64d65a7703d0adc31537d726827c0badb07295c47128f95bab0e64f6fe8b40d00a2896108922731aef76190a3cc0c9269dd8431fb4645328ad234f80fcd716081b3112ff9e183b06624239d4efff15686fce83fa87fa3a000c4c4c11621adae79fe735850c0b6097e71f0983126124c71f72bf3abb2566c86fc852d1bcd588a49ab281ee3e0e5a5d7ef5d7f3da20d36d5d4b15b0c3417f3b9ff1e616b3bcd4a214b1001b352b834667388304e294452b4b60ff362c2901e1e5832ecacb643512053c220d5399bbcd1bc189d24a514c2bd2adb6afdd063aecf13f38402e257d0b1ca72b19e68fec2d7b8d31a1abed857cfa13dad280a53473a1120ec430c00e1b7aad354206b9b9c291c0c8ef554aa16587b5fc27bca7620b91ccc2c5356e0a117f7f6dde8ac11cf99cb30821f949981c408d06e0a447b5298a5f5354357d88d66b3554b3d5498f037e283a4a2e3ec554d4d171980583d13f1cde6778c9e6e377ee60cd01489ceca8345df4af2e10ab6dfbd81230366eb9af0ea66c613545daaa39267dfe9e865bc181f27067b95f96bd5142caa0d4fe1e014100aac496eb099eb9da9d2c8763f680a822511c4f7b2185295a24265aab40908a635a985bc59c1973ffef9f5beb73ec3ca833e83b654d42f3fe961b25a834de857957c05e8873d38c6d99a02dc3971c3e92cd12f28762826a57eb68deea0b8c3ae98249cb75ea22cfdc67df8f9399c6ba70d37c1583ad6a3b866849976d172e664dbee12f9f7bf033506feaf3a567df678e9a03a3ac6a3ba64ad56d5e85d8dcd19120f5225f2b851e14721f81bfaae2eb20d21ef692e8f515ca2edaac0b048d1fe11e0a1536cfd707c216d8037a6bdd30078309d1cc3bdb1b87e2887b13d495260dd0f761b948d00cf2372ab2d528a31ad05d2caee990e2b5623c21c0b4e3cf1c5e4370b8756ca345a80e98eb9777fd6403c528bf2870ec6d6ffa0b3d6fcfa6b9c64ed498d379098cc672bb6f62dbfe4b7f8a8f878a3341a1cfcd2c632af394b3db5b5df482d5b5b64cbc9f94289ab9776ee79db178b684dfb0d7713ccdf973ff960acdb3d928a6277b623747ecd4ccc231df8df7de1c54a1f18feeea6eb9a5af99ebf790e08c8e24aec8ac42cd6a3461b372df1b63990c22fef050696ace428ae938c3c78ca3350a6cfb057a6dcfb9e22a3734a090c807cb920f994911d7e0865fae1f2ec6e37d646c874d31a524268442d0ebb9c1f4db9a17072a804478602ad9e085dba4afc8e76f1b466cfbf755c473fd9ec3ad3ff2bc3cebd25f4d7386dcadb74940cf40e251f00016f3ddce88ec8d914bec6085712c2068717ca63a885961940a8d52474ba2d33d98b30824d348d728cd2d2c0e4733ede8e47fe25dbce8250cc264f6058e477781beb71e8858ebdb31773993af22ff16bd477bc16136d1535460babb5c762fef80b491b20d70d3ad2f412f2d72c8bffd0eb354d2b3c5c064c17b8d03cfae4ad2ed4069261d827ba74cfb519f3b3fe00a3ec60532015b8f6d621c183ee1a5811fc93783df361a8d8f5257bd6b07ed7bfe47359e18598174883588014cf484f55978061aa0bc281f19ef1a7fc55e4345564051e533d04a58ffe0607e7e9962cc8f096e76e6fc8755ed03b790846eb59ef6f599fead13ee65e626bd2f12b4bbc9f6c9c34d7fe74dc476bb75ab58a0e0bc508f0baee2ef3515acce6f51acef57072c1b5f1412a051cbff05257b0d61f0a0b022260e825c7ab2717ac61b0ebbc456066ce47eb41f9ea15bf7050590093eead074de65b5dd515c2568715997275855b6d9fa4467d39998949949dd49fea69d998f7f4a762ffd583cf0e2ffe30336e5eb60e2e99518461a843af3335c0511d2f6eb61052d35f27249f60ff35cfc5b8ad3e42c5d4f44b1309c032dba737746f39e84b5105a7d2adfb55a0920d9610db33280655c1a8cf23626d55bc95a307d3f5ab812d93eab95302de0331bc2490ea745fb2c007ef18c3f6c119ccc275145bc204d41fc717a6e5aaccd126b18bb0902abfdd27a554fb7eb788b8468663fb1833a0d50b414044b32d828db3363ebbca3384f97df8b91954aa7ac880edd5acf8a28d713653eb3e6ec499a2dcd67f0447818762a614516de39be183d2a28591887b4647e611ecae4b2a06899a0ae10597164e67438696d78100767db9b85a7b8923ef1861f20f2c510e2c78f952241b3efd5a69ec54c0103cd6d68bb05a1095c369429c6f53e3fa458c3fb6489757bd14d8b1dfcad60d9b264204140195f6ed6685042d07aa8254bc30b85a1b9a223264fb23698b54376805a3d849e5348c8151491822f0a5fbd41a0d15b4910b146f24228f16b127f2cb096effe22450ae5b3a4e98e327f3ecdbd9b0cfe101fd4330b1cf6dc7bdbdc283006aa86a77f5851be0ba25e438c5ed8af6916e4df1588d2f24514c2164d15d3d1fdcbe6b49fe32b8ceb766b757df3bb1e0dc86573ff86fd49b0bb881121a249de24ca07a117f771dec648ce27046fbfe536881fbc4c9ee3f35d6c1b7ffdee6e2d7de25eaf3bd9b1374170ae8227a9376923b3dfe2c7c88cdee1906f89db7d742b546e40dbe66cfe45f9bb7f8e40e757a12543cc4ff4911e9b2dffd95fa588ad99d394c8fe16bc193710f8f8fb15a06ae5c70b175f1afb53b8520f8c8e15322ff45fe2f66375bfc32780d624e02b8a4487a035850d52a934dfbf1c68da18450b1cb0961740f9c7f28e2b11ea17add7a0fcf94fe9976251c737791e6bd68e58fcd9add6304319d7642d8176d566a829dd4414fe079e176fa3a3a7718ebbce0ea4f95527070d57b1336812d1383b7a0f65947d738a6e57effcfdefd7fea94b48607f3c17fd411c2d3d3f57edab22377eaae98a0d38f5ab506103ea77094db4e66a3173374a5ca269573e7dd4c65f703ac7da4a1f3cc9f51fce4f57021653b6cbc85c0f477627a41437c9ef8a040881b9d675b796f4759121bd18ba8d7763dddb96ad667812df25aa43ec8e5da778c970461785efd51bed554c02ee776cbc7eb9c2066bf11a49bb862713957f8361f463446030b9419ff83a96790948928007af7c7260898f734d3621732505df11adbb64c8e3bf03f60b9076f648328a71e069c872da99483db2e0a9c62e21c8ed0ffdcfa2c06d92a8d475c841e46f2a37c995d303cbca4827f35aa3ee318d0c6e16b590b49b2d0c7ec5472348dfb7343062ac48a81116c03cfafa05fd83266bc5cd383c3d572342c8a67e48a95b5bed539681c25ab876b5702062740f8b37f8f2219e3f53fa8551c305853e88660c87844bc79a80f0545c299654d4e3f65236b846e3ffe32a58109d1e58e7d0c688a6e9799f0c6312c8d4d62cd324ab4f05a25b9bde699f68bdcaab057c937f5cbf64fd334ebdc3c46e9fe66045b258bde7bd61b3946d9e6180a7fdb19f5c9b50f3aa38bd1c3475cbc3e429d779863a240911e607f69eee000c3730614f2a688be6c48e55ee6901968056e277a9ee0c8d1f99821b0097c2d9e64ae71d7cfce8b5030a740b28a01453d6eb282fac2ff6680fce527ab158bc67edeed3a53bb782cbaecdae530bf836a14ebc87052e2f96b3360dd9cd0a9beb58795f0283ef145bdb45962d687ad58ee19791166e604912576fef9e814f258338969c63789a27817d197f5d3fc93fdf6e7675aaea995527b58fe46367cffaa390b713b52e0c8540b74f2011c52876c8d79d0ae00e5bc8ebda4ae5198a82b4765b4e380295cbfbcf09d344be084871321f9f7fbe9762d6f34019978b5037f8ab70e0a778433c5ed2978e9ec11b5572cc65cf430722fd064a844954f660a6d6fe0352d4a7dc787a455531177e3b594f51df9c93ea87e624675d4304c3665c8f73894f8949f467dabb6fa171eefdeb5a7bee663326bf67dc01c719b4053dd6860bc26ce8784e21f1275436ff10730923cf103e7ad1e02324786d2faabca4068c6719b1c4ea49ec1d89b700a731f0211f52948ea770cdec229b2fbf8f425b1f322525826ee565639ebd97efe7bca95292e1ffdfdbe28244d48eacd34bde59f29025fc0d0ade9ae79710b463e0e786043d7468fae41fa61177cca82ae0df40802d7514b4211b15ef9700f82e7aa25479f8166a8e0d99a7b9fdbfaf3b5d72eec80ee5f8a76480cd71f9890180b902bf49afc1abc53ed42a7c78a1bcc6d1a3335e2a5cc4fd9787623475a33ca7acb780e7101588d7609e7781a8da142379a659fef70b824196184e74002facf3c68abd37be93935200aeb0f018e03376ed3ad38148b89a4f13e8ea6e808c5125441f5fe3727b47d13f680772df98c3dbf7fd377df8aa383cab660acbd2afe11f162fcd4279f5b51c1ada72ab3cd9c1d52435a529d49f26c935daa38f33a85f7d9b3d2817a795b9d492db55f1131b99ada6270a145d9113ae59dda79852f7631ac8ec7cb992516a34671e5e8e455f5a62997d06fa1eec1ec4d3d29892166804dad07152477f1cf39ca7b67392ff93751d20392916a8266d33e65c07e68f1f2d78c6f9f52f3d7d50932d942c6e5f4d5a77b40a9a8f2adb56d7a1b29be60528d9248f82409fd7559bf44f47626931fb09226d95c780d486626a36c986c1a4be84a6d9b8808e51ffb3d0b46f4ca27c692d78245ecdce9710e66de51cdb1097fd3ad45e3d2381f2d88def2edcae31af0574ace62ec0db3bd465cf05a86b50257a4e8019c6c7c3a29569b82f220b3fc2ac30d25205b0c4d3559fc934c62df078a19c32139cce6f3103f7669d8e140bfdecfd9fd574e920eaac65e134b1e9c0de2207f97c5155e560e1ace91aa2e182d74d5003f5621f6c4fdd89b8b2d9ba66a6e5d9e2469dce67f09566e86f800cfb6a64755ec2b27fc4e1682766a98dc3cfdaab85568ed7d0012627503ac59a3def6a6beb2c85d8c937e9d8bc2794b539e4dd47902240aba588cfb1e04f7989acdb7a2cb9b2b910951eccf16b4df6f2ab82647dcb050527214af0eb537355ddd06ad521cb3bb143992531d1c6b3d52ed6d8bce9fb9db94088686bd4f7cdce21dd55f30374468381c568bbe49ad02b7d5282ac798ca03c89d684f8d993e579fd3ab0922c04a0c1a0d3cfccbc4ecffaf690c42ecc0443be12630ff6693f6f5a1ab3fb3bedbce7661b2e82a37379a1cf8b921ba32f2d94fc7f1cab7d2a26495094e4bea086faaa5b969d73a2a60360cafb06330d6750aa95c8d4cca2be9dbe6eddf562f62394c0de1d829f9b28b762a25f44ed0f54220a44ffc512e432381a3ec329d7ee34c2dcc4bd1cf4180720c844b33a88a1bada3010d0603b0289f2e68f349a95284f67b08da95e94d85da7e5ca6aaf144407b63788199a8addf982cbe1eb476f017c38f68ee3ac1eaac96b41c666bed4c78b705d7ae67d836b303ddb88a4645f9ad48abeb7880b13a6be4fa96b87777bc835896c46fb0cb41122951d7764058ffc4dac856570f5fdf1ddfa1a67f0c31d1924a111de497b9f3246822e7933e13271fa0eae14b0345bd54fb040f98e120ac4e48f93a2163c2df3ebe4ae8a2ce2ee00fa5188e81ea856867887582b4beb7e16ae74a99feec48abb507d52eaa44a37b952e3a8ff76291530deaafb85835a9a5a5657fed7b6f11dd3d72074cd977f14ce511255e82d26265d2e6ee8284f9f97db4557cbb54438e8ca6571b235e2296a35279e488264200f175f8cb3ea6f85ea517f689f4b4ead3c567aba32e1e9fe26547772a08f0a66c3387bb6d18c80fac42de02092784d7016c64d079fddd59277fc27b0ba67f7e7c94c6f9ba0246f03f35f045269c5933e4872bb9b50d8a7c4b821a75ef87bfbb56639bf0ccb56d5195d224de79246dab0bd05aecc8f0c34a63ceaf52a8e8d5efe77ff2d36845392b2097206403ef42f21c35d3f7574f9a812260f146a0c8b51347755402f99199e1c62b96c64e6d986203a45fd8f07beafa7b5012c46895bda38d3048be9bdbb74415adca57fb493729854cc53128e0142242b643c5e28d3d8e144727567a632d85e7a8483042321ee495122251b984d9333c3363dc7380c916a4f2824b294965cb4e449aba9a4b66860c3ee792e165fe474e3c265d9201500edef6c03ab0d3603017c3c6b33254552c8f7950fc1c7397009316d83fc3c364e6e3bebc5de3fc03a999afc264a395e375bb7c2ef77bbcbca56f7cd3593d3cfab3ed600a6c5458c3838b8917ee3de1f940fd6ddbcc19c1ea4fcf891d4c2579f3ef0f6b50d5f77fcf8a8920da1647ab269a87e00eb8e15c3e2bbe6f6c3546039a0bac0bbc71cd65110cf47d6603f930de4b19de8e8b811cb0d9252ad02f9d9315bc399732dcf04c116375ee0114c9d4df7aa6d26e1f441e581e9bb7e42dd6d723545a39b83e7c08a683a72c60b13b66d874e89596bafc0293bb3eb799ea9b2099c195539f21f2610f1f170391782d4a41da698a07c8b416b58a7e873bdd55642dd28f8cf3136ee09d09a4d01aaae3c72488ba6cfd8c0350dc467822c01beecef814ba89e2ace59cefd58e96d6419c5f6217f15b6d9a8ab56f32f8cb3128c41144fde8ed3c0522c7f4aad4f4763902025975c4da6d555c83b1f3a258b37f9f7ebfb70c228e691aa6def69bab5c92d12e4cf756b5fd4a363a9ac3138535709e719de6dc8528b4a9ee6ebe6aba4db23a5eee8ad2cf3717b68dff21136e1c6fa162ff6bacc1ea4f9e914fe9cc7e2b9faaec04dab7669db7235208fef02ee537d0b8b3272b1661db1585f7f354b11deebb3d98eee8f245fa5314f1dca538f15d4d7be5e4403106bf363948acd26da3748e49adde3c0e80436238a0daa42d5b522a7334b96eb24cd393c1a0ba4639e29898dfb292003d8ca3eca8abc5fa30d4392141fb46c714360387699f67af677a5a9506515afb59295093d0a119f0b928130f38ebcc1707a67ede13ccce27909bd40969db3faafaaebd84fac43ca66f4bc804b206d4d62a39bc93d25fd1035ed94c8cf80bf080a409aabbb81fc4d9ac61c69160465e4c589ca3f2eb1ffde149acae696c0eca73d864aa44f39a32f9a8f3307bdcf1c12f3dc7fcbca8aba02949d6c59cd78d2927f5e9690228be43dc66cc8e59f0c5ce137546bf121f38adf98e9d4b143804183999ffb6e1e031f7487651fef48abc6354f9449f8bff44a43a19c021f761725f1b880a75716cd538e74bd717c734ad23f943b72e6860750ee337bb03057811f63c40edecd2d11c1ef4a195b1f6878308a7ef027e495d2e5cadd9beb23c7d535c15766b60c044f15a6471670d6e7e85a2be22c8b992be984af12365d3e90d64ee9f2fb2def0b43c7e1439331286854c1ed3b3ca3b90a83c77c03c4feb59cbceeb47b25af1cf85e3c3a0adcaa09597766c14cde36b1b1d788b478d7a56a6d77473f6c71df5cb164fe577442d15cbb8cccd70e6c14399c78048b2ed59273c0bc24996fc2a6efe69c28b5058d45facc3017d3f40d50646a79b94e8f8a7be30e16856ec3d41705973aca082c6799271fd4f4ab2c4949ee3d037e86ada4343920909dce671dece335e568bb3c2ed42cd1b220bfdf8483a2d2b942dd9b6a3b46edd265fa8be33d4002e8257141812abc1f7750c3404635983e9f6be8e01f917180986ca5610f67aeaabb5770ee9b34172fda931167d78e9080c0a3581e3e260609d55746ad61b856fb8c3e513b732d541bb3d307079c8c5e4ba88b3b61360c9e97e3ded7533ed2a557a1a4aa9f3145325cf7e64c8f3d4dc7ff1d4af00803d2bf580cfe2aaa497613de8736fbaa3a1ecb8379eba201b35cca98cee63ea3cc9675de8ad6013b128bd701b2e7a15fa96eab3e0d3fb2783f226df1a637a2adb648d7fe2a77214e3af03882955505e454cc1224303f9f225ede9e4e7d95ad748438e9ecfd26848b795a79848723b5ef1e53320ec7b05305bdf9790ef60dfb3a7931209b58a3716f5795f11c807eec0f8d3ed77be81257608e71984f6e7d57b3fd007ba128f6573bf3ad3f273ceb78cd4aad98311dfdabe8be8040e6e1c1c1655e496f66ac0db68bf1385fe6d5acca325beeb58f356e0d5294fd1b85c6f2a8e5b9314701d325bed0865eb4c260532af63cf342daeb87144866231c7a8f43d2a7a93412dedc236e036db9f6d3031df22b1452047da0099e1ccb05926a6b919691d1631b5818777416ca065c71fc4fab6c3f4742c949b809e7e162060ab88aa00f711f190ceafb4966d768d66558a0c9536b863234ad712ff4c2ab4c9b735a2fee8b72d52623d5ba48af6940b9fe0e14094c09395d84465576f70f19d00d3e7c3971365656b4b7d39f526b2ef55c9fb3b7000f2a4a7ec716ca502d591e62b663a909ceb0953b0d41dadc1dbe04006b5fcb344fcce31344a56b103cd6f922810e7b90879b6c151b327bc38defd8f3ec1776b299de4fc0780d32d6d9c2715ca31f1f56c3e3019296ef25041141cff2b7503b8faee5e182384cb60ddda39f1aae314b3f743c19c9090fa8baf8203a1c615e588f32963fc5b99d481ac06e01aa0e1cb52d854b3efd79d4a2f4ee2ea7c8588898adbc841ad89efdb66e8dc949f14543f5aec3dad502794ebb6054c89037b07342f2fef3a51ef0937285c34d19961c9062c2ac1c2e84077910113240cb1c39fd66121136abc1f92d43626449651d456a61920f41ed35da83f86b6776859ea00d264be7e4e23042e7648a6d74b8954f528743d3999ce4d071a79e6a53418fbacc5df9a18d2adde3624a1b6edd1be3b40d1d2caedb61d5bc02d42f3683356ecda14d4e02f00ec030c433dcfbcb08e3160cf2535629fb2809dc72e1ed19b49e6a1d4496d24c9a89b4a893ae699755e57e682fcff0fb53e4bc1cc39082f2606ff15d7dedd82d218e4b7fcd1b4966794a09c7ec6655a2bb956a0de1af3265f25dfcb3c108b3582335174bde87dbfb9be60d75e186d436968dd627ad9c8d0fa09c0302c00a9f9dd649fc5467abd7e5a785c6ea64f91b4b0178d6ff33b92d74659d3e4d7da66c8844e2e02ad524cc553f0dc4851b2aaff1f8d2ac3e98c2d776799f1e5b8c24a5f8105416562a0ae060897762878896e05849698f423e4f171d4157b2e2282faf2c6fc8561750671b17c76dd8ca32d0f4987c3ef79dcd5c093c9d7bce6b823debddef708b40dfa2a86df8a64cf0f1a080475348e50b78d4e090477e18a3c31fbfc47d3ecf0d9f98ac5874d86e5f1d4f0ccc5b1873fe3c44760eab4eeb68b1ea995c303310b66d9e88a524fa6553cfa4fdc71907f38e6237c9c4b0d5d46a7f1fd7d9d7d533dd3a04fb3de2d8fa5679efdfa518c9fd2ceb5ce996e0cde46c95f7f74d972f5bda1f38ec933c6f0deed12d5f7c86523a0f294ee79e3c322a312d9b296a718e3a973a541d5c75d801ca33f098c3e92a2fa3a4188f2704c1a724fbf41acc2b0cbe16a0c719ed5ceb479b48c212147ee514de8bb81067f1a67dda01c49ca33502c87b0840b3babb56ec8126f982b3c9fa71876d7d3284752ed034ca19c4da6435e8c878aec648511c22c4346242efaea710c41ced74fc775408fc2581fc2762c6e1cbca8785f56d867fe86ac470a089f895dc721f5dfe9f7e783f829968d8e3f99e0affd75fd5e9832e0cac9fb783e5c75cb5693b67064505dbc032e00af0b6f23feb268276dec0c13d1721c4d04fd77a235cc4d68b87d682d00af085e8b55a18d18dffcd5771e421f7cf9f4e3bf296e5d82686a3fc621968819b2488d64e88afe05d439ce133965c46ef633361c4330c2a3da99778cd65ee11e6c631fbb639fffb2f34caf247c4c83f6f8baa5b930348a2c0f0e1910e7be31d672d69e0acd0234b4c39dc528f8e4213f43deb2dfb1aefba448be4e6c76387c2a0a121dd121064fe1df318cbb84345731be544d1f5108a3aa17490294c3a7e38596ee6af3d570bed10cb41438ffbad36e2b6d133289de5cd7af782ef3a890d770a29469f2182c80be5e0c715daf53482ad958b879c9ac2a4c526cb7c726c6fc2a81c344859642136c4318c71cf7476c9c8378375c52eeeab5fb6fb67883a2d671606d103ea53b2f89823f527ddaea2ff68f63bb5bc6896e899c3e8b4c3547538dac8616355ef59f142313e9fb6ddcd64455dc868ef5d71a90115b7348d40babbf24e86cb74c5d39b57e8c4b1c52eb2bf24b3ec9d138e3545e95081f1af1c4bad12f7b96ed54673ea59ebd386f240aa5a4920f6fd9a749bee6ee8a73f7d42d0981e5c44601fb62f52283d9aa0dbc667addee1c4772b785c9ae58a61d34d403890238cd1f2ae71911028cc76d1db411ace224b19495e85c4ebfddabaad9e3e1e3f048549d52042ac3e42d79fcbd87f639591d4579cea42cea0be84f782e2b7138dd384e2bbdc0c6d6753c66d82997a13ea2f8f44287df819e35a1aa401603aff2fb75623b03b520abcfd568a0e12c909137a4a621a12641d1b983e3ce96268256391681a06ab0fbb281cf5e1b4b6498a591ea03c34d66d827e074bc255f95d68a3fea577bc7c6120be3bda9ffd1c499af80ea7c6c5169b834ad8d6baf3776c23af3a4b010fb1944cd8a6589e62e34cea718b6a7e899de8c0aa1a1ff4e37b4d01f2adf1dc17ff7963e7655a5704418cdd8cb674bd08e61e18eb7a19d4e13950431b395d2be7654666f7beb89a87c8bf4877e5563e43205bf08c395fca3af30e48e3ae9813b7fc260824ee1e5f5bcd2ddad7e07278524b4836626cabe65b3934a70ad83902a5b905fcfeae887e3ed38850e7d57cec015150df4fad997e78761f653a94e074380bb1e59c96f07f013a29fe808d4e7054fa73e046d0e5980c6e2655e2cedbd229705ee4b251b61ca0e5da4b74cd621b0ae13845011b5d2eb1f216d144d1ab3abd17d1888877267e3d58d549078af39d78fd096b22b1fc86fc43ed3903c710324231bb1a43f4eb1a168da7d28199cae20a3909eba407c920523e39c13a6c9dfe29455283e47731b37d80b3f869fbc0b7d99a1e1a9579261202d4d6bd475ec3eba1c85a400d62d1f76005adb1d6f2bbe7626e659132d9a6edd87371cee3938260b56e75fb5dbb72d5faedf675e33a12e02b59c50d40387471777da74dc8e03761470132707e19607e7179eccd8c9899b5d337520d9ff91bfaa648b9d66440083325c37bc3074b3c9434a4ef8cbd9425358ebcf73932b640f4b9c6ee1f598848705e021ae05f7f155572470691211feb3ca2ae9e4cf3a63d73612a897f7d19d127bb2706e22ac9075427f3d781a2439ad4d13f8bb3849d0b21aec1abb3afffca63a4d532834dee7e6d5b1c3539033d5cf571c358ae3f276257b824bfd806e2749d328f4e266818a499964e95d0bb1ed9f0f672cf0ca2da717963e2e661d3a7c01fdb24e8c3c2b5f015033ba52a8f506a3b930f4cfef8031230b4b2045e44a6f013ec9d7cc4c75fe805f54896637f46c8ffaa7907c82e68e49ec06b4ec7de9754d8ce8aed71a2b376e70f02e3bbd1243236c77fa2d105f07e6e86bb979e898bebde494768e6f1c74cfbf8ee43622dfe63d1366af8959783b14e33e567c1fafb12c530d5c2f645d75210743beb775773e7a3a7032d2f2359b573c91603eedadc5f7975dc0383633684485db5e8696293006680ce988987886a6422c6dfa2dbe841a4bcbb23223e1af055e8a8cfe7b55c639a10bf67cb0444dda4e05d86038eda0184cd152bce5209681170b5182d8c72d28e5545784171ef3e6755ff0d8c51a562e4e26c26eff37f1fa0320d27a0197a0101d7f86057c5a89cd87c2c178e3eefd1a7ce1fc60c7fd767d7a296cc858309bc04838ef4220dacfb8cabeb4827af9212d38859ea426e94d078f5d20d7d4a8c666c9c710ac080b87d382aba0f915c71eee0ec8a4337370e1da1d350b0470c7b8762645f28029854907e873d1c116e54e6dcdf6513de1b4071cdca4fc412ceb522d10d88769dcaf9bb09b080ec3b0852ea4687cca4cd93219beaac1d84d7552c767a60fb863d4d9192b212ef8ec0070d8e8bfec8d9b3f95a7cc639ce8dd8bd0bd3bf1e5fe1b8b5cbc8c9a4c70395ceb74210754718c979a6ff3d4830c5f6bde5888617af82e0918f89f777faf9cdd720538856fc0cf3a03975eb045b93d38cfd0e3e906169b45dfab965a8f1da6f629781738e781421310fbfb566c91d78ce1ebfb809e2fae3b1097384a88cd5819d96c31b4534960c28a87bb81b9f4dd2a899c1126f8dfc3f9825a1d7efeb47edfdfd4aa2ba9a84b9a7efd289d839dc57a08ac1a49856751593bc3cdec3685975c52f22c7fcef2c5c37ec91b07eadba3e440f33905679c7a335fd6e502ab6e6c16bf774471b7d33ce33114ab436079b7e95748662b1f91ab8249d8fa76d38cbd88eb36d070bae8cfb5dcbf6d6833990bfff359f4ffa03a18563233509b28e7948f877594f240c0c985e485cd91cd1237d7d8f2193605b648f25f05cb525a033bd7e104408d222066f20035a6c84751200791c3e9a11ee3caeffd297ff2fba14f205a5c366961af1724b1e0e6971f62db8c7832a5aeb47b0996ee411c8543339a88af39405cb9fbc0348ecc51050b2bcc0ded3dcb920f6c436efcc3dec1e96dfd2cd0c3c65f06b8d64829dc608fc6cf2abc63c302f44cfefe0adcdfbbb3763d5e590d0e941ad143f2bac9dcef4fc14cad7e9c702e8319e1be1a70baf41b55829b042a1c3f55a178b70b1602bbae9afaab331ca7a1e68209c2be968a4ac20b3239374d2369bf437662d655b0bd94d6250093e1847ada3f5d7b46a423082b3b5fad52b93e49ecdc31bc5a2a48abc57444ccac890bd0d67d385954f3061afe0ee1ef803dffa88bf5d8638787716ed6441414f8e8e319a8631782dfb1ea5a8ec22a9064add285907c9bd81fe07d24b0cf83212735939a6bc61d3289a8fea3fa066d48f7fd8ab04991ec47f9e1697266cc45236593ef99c27babae8ecd67de27e20262a0892e1d79bf2f0a8368847aa18f50597c7a74a901d9c7d17911113ce6193a9769b05a173bab11f03ddebe0db39fc02a7bbd2f388dc70bde3bc8db60bcf1dee3ef0d78466953fa299755c133d45594dd4695dfd6eb3777444c53fbf3870aefa4728c56ef1dde9469e00e54323730935049c03f80a5c04350d216259c0de645c834f053669dba5833a3aad90a818f900db44779b0ef11c37aaa24781bace01c71f7775efa85725b187154f6cbb4da2c01cdabaa92ede7101027c502d0ba656588ce152ea81597af6f7e650ee05297927d0eb4145962ddc1834e9039a82974c3c33b8d10ecc61b5adb69c1dabedc68cc410682576a51aa8e479162340acb95b934bd9c64e4644b7304f96d2b37af676003f2efcf19cbef8320366ef6d680ac221b5166e499fd30b57a1c992155d2740fe4ea74f1d97173bd8b6693df677357516eed2f370a690291e5e400cccd19fd5362e512d1c79c45d8aa4acbd0a02ad1f4c12eed93167eaa2f3ff6db473d7a0c7d1bff5b733483f7ad7f1d9e5f5674a1765984f07128794f3551ee5f1c832af04063de0a94b82de4b01aba7fb29f1453160abae85a370468565190c6ddbc7c2c548e31c97788da811d29b09a8a472c716576c7bc129743553e0e4663a3177a9f5634097db53e25ecf956965a90572b756dc1c5e4cdfddea787d203f429c31df9e41f6580188c1fca6855fde98eba86c875717508c58fefb8eca171806b64dc5680d19e64098a292e8f87105502048506b20405add3eba8a9586e0dab6fa5df3a75de89dc9faad632f060b33d7f4d923e8566bc676784a8f643677ba1f5800e8503b34f44ded6cb851deede2bd6bca9e4dcd72fa0f4ba14079c98d334cc48f1dcf2d96523cde35bf9e30d4f41d1d3dc6201bbec4b304e5727c46d13dbcda87109519ac55fab83c6fb8806d26e215314f56f20faac10ceed17e55f4b314b3f70882056b5278ea6e9c25e0919d9b0570dcb0412c2a7fcdc37d3ae07f86be4666c728e60e38d30e5d65b7fb41405a43c351e803cd23b1a73ffd559ec851578aacda68f42325da91d1fc24521487b0170e7a4f0fab744f99c1397d205dced93c8b9b9cb8814657ee5b8a669ea4fe32163d40ca2f4be1bec656e1a9aa3c998b6e79e3be664bf61de0b79a354803aeb828a3c3babe751dd366c961e1fcad0407dc733e1cd437d47b75e02f80a20e69fc0a13a88bf0eaad03eeea70fb889da56883b5b84b50923000b5478403938689f7e91c9d11a80a70ba791fb9ded1b3b8efb4da9495ba2b4a4e5ea12a93cc8c8b1e3517d628554c567c3bb70f445694f8d7bd0826dead42c1e52416c55de00a128e71148f59a51ab7a59b81073c3d5c1e0ce9aa2b849f97e8ce7db906f8dd72985d4375551bc9c4cfe392c8d4ca74222fb730b01b7d7b4cf0335ce32b2f50c1bdd0dbc660d20024c53416bb3c24ee6e88286e222c551d7754cb5bb9e2796a3f9dc6450a55d9a51dc2265006e178f84763c10b0e2de070a0070b45330ff01b5badba1ae6e95ab3d0a64ffbb3b5a965b0daba03ab1a8d7821fe2438a33c07f9343e80c4ae0616d3eca4351cafd39872ec4faf804644c605757bd0501e8d8b7dbb0bacb62914de5f71dbd24c2d65b8848126202e013127a4449e47000b33dee73757fd66159c6c6181ce3c9d1ef8e2c5c882b8418eda0beb5767e58cf1f6020e2f9e85dcdc39395ba3c40460e44404a96132516c2b0bb58294d97a8559ad7fc7857274de1a73f5ea348e2108c7af210102e9e1d0bb0cefdc19ba8bc9e3c36070b3d914a8976a4309b496f660d8fcc9808053c42b7578e64e2ebd04b94ba95534e7402271bbec00f084ff7a453602bc489fd100dfde4ebd5db51421b58de87b0f0e383d1072418d3cde9c9537bc6c5f5c740560c87609916f90050bcdfe5725b46b0750e8805573ff19e7cc0feef6dd430185f4dd0ac0608a177e370b34b07be237072e4ad6aed9d43625c6cc2ddbf02c72d71cc9a8e858bd0b2468637cd0da7b5c1d800331c843d346a1ec746dc319619d14e8ccb7ce1861a7825a238740c3da5646c30db26e21c7c645003b0957877c6d06d803a3f7b9ffa889e2b61bfe13928da665ba1713c2daacf5dd39838364f88502583be6b0d61702be79a75ca00840ebeecfc6df38339c94102db4d512d3422b3b1b00637df3e0e875ac0a53070251a0b83fbc628758e370132fcd6dc37f1f727316b897e15340db2911c810e4d5822d34b8f3288ac14adc920457d4868475d49e5c2ac2a54e242e28e4aedf45c06d333233b9ece317f28be942ea7b23692001b8efd7357fa97875fc076f45f374378446de1592ba28d8e47a9d2df9f0f6bdb968530a35d8e72bf56a73f27a86e1e877b8acc3e1d8772647b81208d7901ef845d898fc2a956070e8fceb261bdf96752a8b68e6eb23ceb2339e3ca5b092bc70ae86c69a194cf6aa96e9990c1a2b766027dc6bc8872b5b00b7ba861b386d6c367c6742020b7d7add7b5e5a55adb1d5d3d7aee8e7cc8e38c6deea4dc7a4b36910bc45746fd8223d85124b9c2c1893db937de91ee50e83b2d55581539aa10aedbfb6cc2e4a52e39c57e6fa336a9180d397814f2e93f0c3a6b64bd7d159812862acd5b03888bd0ec33668df42293c82dd565be012cb1e98502c0f6db460038df7f9e0492e86f07bae8f6513d49b6896a5dbc0990370ec94e124a88e0e128ca8f28eb627f87fcde8ddab339abe052b25cdf9151cfba92a531bfec3ce4829dc48b2c972c8ddf29eca3fab2be28e8f0b2d9e77fddbb6d5713028f5a834317d6c501eaa3c0986f9c2f986395eb091ecce7388bf391cfd5282e1b59984d134a7f7496b46205c81f89e75274cd4e40d22ce08c42d79fc4c1cd523d2a983b5bedd44427f34f0fb595b9aa1ba36efe8a81edec1a5b36499c91ac692ad37a29932e83ff784d10a88a6be41bd1dde2f83670ef4b7d1ffce63713659c23869494b489b0f32f82109db41ce4af916be250627a1eeeee94a901ee034649238f54de813f77d2d0570be4e301730a990a3c6fb0229b75dc1025758996cbf8440ecdd9adb8a5dbfd6f08df53a0fab38694e926dcfb1b2efc9f352c6cf4bec5a8e6732af707290f28a7745cce579782206026930d33068e2f2dfa46eab2118e32df27f28d2f5b344111edc775cab0a7724becfe65f8d3e04634ab998dbe516fc82ffca2f912933ee33bfdc0efffd3b49544ab6048d0f35636bce664fc552941cf5d29c1202b64ed5cd5ea88e590adf9c77de087fa76cd074fd530dc110a47e47829b0b41068608cc30a80017213135ce470412d8a482bd12b9c4eb660ee66bbbb5238e8ba2db182ea4a70bfcb6e2d9dc90da1511e31a382cd2bc6428e47bb49b6c2d1660b4a23800e756f0c9f296eba0d6bb7f77f4f3a4a292b247bffee840806d1403cc74197c8cf5345cde4a648fbf865698289bc68d1f9192da6372da5c9f9a0ae3f949b6497ec238d219b752919ca54bd6215b1136011eab158829bf253e9a9b6cb00e9038da99e7df105685006b093b739b086d4f3d3bc66e4e3b5eed7f1b463ef2a23cfbfa6ff0e41469e1b6d59e5a6bcd38fc28194660720367753385a6c2972810efbe5f91292750f0fad1ff5fcaa377b905252060829639787672107ec4a1cbeb25c1eee52e007719891f4b9af1abd9f19cf0f2d57a732ee8b59e07215daae39980550d93c881805d254ff41ebb6be266483d97f9af63525c58ca98d3ead4e21f48203b2ee70b62941d64c6d75356b7fc6a8bfae42d7e15ce3564754d1bf408a4759d1d55244609ed2e157d641a44b9e2b4f66ecaad3e64a7f71c9ad4b622532d78753ee3e5f4ab487e20c8d41a1e825786bf21b7529571dabf37610a54b146660b1641f8f2498a0c8d1d0e8a463342b1834285aa0342dcc85845658d9bb33913f5a4d7274b736ad10ad9784fc0b796f7e54d6165e5a6f68ebf6749d4b1c9cbe2ed588de5fb6d84e668821d6c0ac89711d6d1ab5fcda690c16e97d8d230e8f793a66c1951f06c59d7a79518fb81f5943ef5312b32c6dbc2eaed41950e65ae04f29517d480defa6ee771564dc1ebfe64ad0d15579a1f2db2d5a584ffe088e9c5802b4d4a30365aa11b2e29e9da6edb3a4f1d9393ac2b3b9770c132578711389e9841c342b38d23a54648347ea1111809d6b4b9f1318b4f25b6410d20ddd0a8847b1d0d004cbcd2a33a5873ceb23bd74d40b347b991888773056cf19a52a7868885d089071de2762719a9caca3f8aa3a0b6112a8f38ea41ff493f92e28c540000\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Neonmind\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Neon android\", \"Neon android\", \"Neon android\", \"Neon android\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Glowing brain dome\", \"Glowing brain dome\", \"Glowing brain dome\", \"Glowing brain dome\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Pink-cyan rim light\", \"Pink-cyan rim light\", \"Pink-cyan rim light\", \"Pink-cyan rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Teal-magenta gradient\", \"Teal-magenta gradient\", \"Teal-magenta gradient\", \"Teal-magenta gradient\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Accent\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Neonmind #', id.toString(),\n            '\",\"description\":\"Neonmind is 900 Friendly cyberpunk android with a glowing transparent brain dome on a dark teal-magenta gradient. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Neonmind\",\"description\":\"Neonmind is 900 Friendly cyberpunk android with a glowing transparent brain dome on a dark teal-magenta gradient. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58246383","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-03T17:56:24Z","match":"exact_match","chainId":"56","address":"0x0e42D40fF176aE2156b0dA3668F9a5EB0565Ffd6"}