{"sources":{"Phoenixi.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity 0.8.24;\n\n// File: @openzeppelin/contracts/utils/introspection/IERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)\n\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)\n\n\n\n/**\n * @dev Required interface of an ERC721 compliant contract.\n */\ninterface IERC721 is IERC165 {\n    /**\n     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.\n     */\n    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);\n\n    /**\n     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.\n     */\n    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);\n\n    /**\n     * @dev Returns the number of tokens in ``owner``'s account.\n     */\n    function balanceOf(address owner) external view returns (uint256 balance);\n\n    /**\n     * @dev Returns the owner of the `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function ownerOf(uint256 tokenId) external view returns (address owner);\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients\n     * are aware of the ERC721 protocol to prevent tokens from being forever locked.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must exist and be owned by `from`.\n     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or\n     *   {setApprovalForAll}.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon\n     *   a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Transfers `tokenId` token from `from` to `to`.\n     *\n     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721\n     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must\n     * understand this adds an external call which potentially creates a reentrancy vulnerability.\n     *\n     * Requirements:\n     *\n     * - `from` cannot be the zero address.\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) external;\n\n    /**\n     * @dev Gives permission to `to` to transfer `tokenId` token to another account.\n     * The approval is cleared when the token is transferred.\n     *\n     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.\n     *\n     * Requirements:\n     *\n     * - The caller must own the token or be an approved operator.\n     * - `tokenId` must exist.\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address to, uint256 tokenId) external;\n\n    /**\n     * @dev Approve or remove `operator` as an operator for the caller.\n     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.\n     *\n     * Requirements:\n     *\n     * - The `operator` cannot be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function setApprovalForAll(address operator, bool approved) external;\n\n    /**\n     * @dev Returns the account approved for `tokenId` token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     */\n    function getApproved(uint256 tokenId) external view returns (address operator);\n\n    /**\n     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.\n     *\n     * See {setApprovalForAll}\n     */\n    function isApprovedForAll(address owner, address operator) external view returns (bool);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)\n\n\n/**\n * @title ERC721 token receiver interface\n * @dev Interface for any contract that wants to support safeTransfers\n * from ERC721 asset contracts.\n */\ninterface IERC721Receiver {\n    /**\n     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}\n     * by `operator` from `from`, this function is called.\n     *\n     * It must return its Solidity selector to confirm the token transfer.\n     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be\n     * reverted.\n     *\n     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.\n     */\n    function onERC721Received(\n        address operator,\n        address from,\n        uint256 tokenId,\n        bytes calldata data\n    ) external returns (bytes4);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol)\n\n\n\n/**\n * @title ERC-721 Non-Fungible Token Standard, optional metadata extension\n * @dev See https://eips.ethereum.org/EIPS/eip-721\n */\ninterface IERC721Metadata is IERC721 {\n    /**\n     * @dev Returns the token collection name.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the token collection symbol.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.\n     */\n    function tokenURI(uint256 tokenId) external view returns (string memory);\n}\n\n// File: @openzeppelin/contracts/utils/Context.sol\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/Math.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)\n\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    /**\n     * @dev Muldiv operation overflow.\n     */\n    error MathOverflowedMulDiv();\n\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            return a / b;\n        }\n\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                revert MathOverflowedMulDiv();\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n\n// File: @openzeppelin/contracts/utils/math/SignedMath.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)\n\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Strings.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)\n\n\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant HEX_DIGITS = \"0123456789abcdef\";\n    uint8 private constant ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev The `value` string doesn't fit in the specified `length`.\n     */\n    error StringsInsufficientHexLength(uint256 value, uint256 length);\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toStringSigned(int256 value) internal pure returns (string memory) {\n        return string.concat(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value)));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        uint256 localValue = value;\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = HEX_DIGITS[localValue & 0xf];\n            localValue >>= 4;\n        }\n        if (localValue != 0) {\n            revert StringsInsufficientHexLength(value, length);\n        }\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal\n     * representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n\n// File: @openzeppelin/contracts/utils/introspection/ERC165.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)\n\n\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n */\nabstract contract ERC165 is IERC165 {\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {\n        return interfaceId == type(IERC165).interfaceId;\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n\n// File: @openzeppelin/contracts/token/ERC721/ERC721.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol)\n\n\n\n/**\n * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including\n * the Metadata extension, but not including the Enumerable extension, which is available separately as\n * {ERC721Enumerable}.\n */\nabstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Errors {\n    using Strings for uint256;\n\n    // Token name\n    string private _name;\n\n    // Token symbol\n    string private _symbol;\n\n    mapping(uint256 tokenId => address) private _owners;\n\n    mapping(address owner => uint256) private _balances;\n\n    mapping(uint256 tokenId => address) private _tokenApprovals;\n\n    mapping(address owner => mapping(address operator => bool)) private _operatorApprovals;\n\n    /**\n     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {\n        return\n            interfaceId == type(IERC721).interfaceId ||\n            interfaceId == type(IERC721Metadata).interfaceId ||\n            super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC721-balanceOf}.\n     */\n    function balanceOf(address owner) public view virtual returns (uint256) {\n        if (owner == address(0)) {\n            revert ERC721InvalidOwner(address(0));\n        }\n        return _balances[owner];\n    }\n\n    /**\n     * @dev See {IERC721-ownerOf}.\n     */\n    function ownerOf(uint256 tokenId) public view virtual returns (address) {\n        return _requireOwned(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721Metadata-name}.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-symbol}.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev See {IERC721Metadata-tokenURI}.\n     */\n    function tokenURI(uint256 tokenId) public view virtual returns (string memory) {\n        _requireOwned(tokenId);\n\n        string memory baseURI = _baseURI();\n        return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : \"\";\n    }\n\n    /**\n     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each\n     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty\n     * by default, can be overridden in child contracts.\n     */\n    function _baseURI() internal view virtual returns (string memory) {\n        return \"\";\n    }\n\n    /**\n     * @dev See {IERC721-approve}.\n     */\n    function approve(address to, uint256 tokenId) public virtual {\n        _approve(to, tokenId, _msgSender());\n    }\n\n    /**\n     * @dev See {IERC721-getApproved}.\n     */\n    function getApproved(uint256 tokenId) public view virtual returns (address) {\n        _requireOwned(tokenId);\n\n        return _getApproved(tokenId);\n    }\n\n    /**\n     * @dev See {IERC721-setApprovalForAll}.\n     */\n    function setApprovalForAll(address operator, bool approved) public virtual {\n        _setApprovalForAll(_msgSender(), operator, approved);\n    }\n\n    /**\n     * @dev See {IERC721-isApprovedForAll}.\n     */\n    function isApprovedForAll(address owner, address operator) public view virtual returns (bool) {\n        return _operatorApprovals[owner][operator];\n    }\n\n    /**\n     * @dev See {IERC721-transferFrom}.\n     */\n    function transferFrom(address from, address to, uint256 tokenId) public virtual {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        // Setting an \"auth\" arguments enables the `_isAuthorized` check which verifies that the token exists\n        // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here.\n        address previousOwner = _update(to, tokenId, _msgSender());\n        if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId) public {\n        safeTransferFrom(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev See {IERC721-safeTransferFrom}.\n     */\n    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual {\n        transferFrom(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist\n     *\n     * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the\n     * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances\n     * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by\n     * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`.\n     */\n    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {\n        return _owners[tokenId];\n    }\n\n    /**\n     * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted.\n     */\n    function _getApproved(uint256 tokenId) internal view virtual returns (address) {\n        return _tokenApprovals[tokenId];\n    }\n\n    /**\n     * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in\n     * particular (ignoring whether it is owned by `owner`).\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) {\n        return\n            spender != address(0) &&\n            (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender);\n    }\n\n    /**\n     * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner.\n     * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets\n     * the `spender` for the specific `tokenId`.\n     *\n     * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this\n     * assumption.\n     */\n    function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual {\n        if (!_isAuthorized(owner, spender, tokenId)) {\n            if (owner == address(0)) {\n                revert ERC721NonexistentToken(tokenId);\n            } else {\n                revert ERC721InsufficientApproval(spender, tokenId);\n            }\n        }\n    }\n\n    /**\n     * @dev Unsafe write access to the balances, used by extensions that \"mint\" tokens using an {ownerOf} override.\n     *\n     * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that\n     * a uint256 would ever overflow from increments when these increments are bounded to uint128 values.\n     *\n     * WARNING: Increasing an account's balance using this function tends to be paired with an override of the\n     * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership\n     * remain consistent with one another.\n     */\n    function _increaseBalance(address account, uint128 value) internal virtual {\n        unchecked {\n            _balances[account] += value;\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner\n     * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update.\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that\n     * `auth` is either the owner of the token, or approved to operate on the token (by the owner).\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}.\n     */\n    function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) {\n        address from = _ownerOf(tokenId);\n\n        // Perform (optional) operator check\n        if (auth != address(0)) {\n            _checkAuthorized(from, auth, tokenId);\n        }\n\n        // Execute the update\n        if (from != address(0)) {\n            // Clear approval. No need to re-authorize or emit the Approval event\n            _approve(address(0), tokenId, address(0), false);\n\n            unchecked {\n                _balances[from] -= 1;\n            }\n        }\n\n        if (to != address(0)) {\n            unchecked {\n                _balances[to] += 1;\n            }\n        }\n\n        _owners[tokenId] = to;\n\n        emit Transfer(from, to, tokenId);\n\n        return from;\n    }\n\n    /**\n     * @dev Mints `tokenId` and transfers it to `to`.\n     *\n     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - `to` cannot be the zero address.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _mint(address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner != address(0)) {\n            revert ERC721InvalidSender(address(0));\n        }\n    }\n\n    /**\n     * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must not exist.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeMint(address to, uint256 tokenId) internal {\n        _safeMint(to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {\n        _mint(to, tokenId);\n        _checkOnERC721Received(address(0), to, tokenId, data);\n    }\n\n    /**\n     * @dev Destroys `tokenId`.\n     * The approval is cleared when the token is burned.\n     * This is an internal function that does not check if the sender is authorized to operate on the token.\n     *\n     * Requirements:\n     *\n     * - `tokenId` must exist.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _burn(uint256 tokenId) internal {\n        address previousOwner = _update(address(0), tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n    }\n\n    /**\n     * @dev Transfers `tokenId` from `from` to `to`.\n     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - `tokenId` token must be owned by `from`.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _transfer(address from, address to, uint256 tokenId) internal {\n        if (to == address(0)) {\n            revert ERC721InvalidReceiver(address(0));\n        }\n        address previousOwner = _update(to, tokenId, address(0));\n        if (previousOwner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        } else if (previousOwner != from) {\n            revert ERC721IncorrectOwner(from, tokenId, previousOwner);\n        }\n    }\n\n    /**\n     * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients\n     * are aware of the ERC721 standard to prevent tokens from being forever locked.\n     *\n     * `data` is additional data, it has no specified format and it is sent in call to `to`.\n     *\n     * This internal function is like {safeTransferFrom} in the sense that it invokes\n     * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g.\n     * implement alternative mechanisms to perform token transfer, such as signature-based.\n     *\n     * Requirements:\n     *\n     * - `tokenId` token must exist and be owned by `from`.\n     * - `to` cannot be the zero address.\n     * - `from` cannot be the zero address.\n     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId) internal {\n        _safeTransfer(from, to, tokenId, \"\");\n    }\n\n    /**\n     * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is\n     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.\n     */\n    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {\n        _transfer(from, to, tokenId);\n        _checkOnERC721Received(from, to, tokenId, data);\n    }\n\n    /**\n     * @dev Approve `to` to operate on `tokenId`\n     *\n     * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is\n     * either the owner of the token, or approved to operate on all tokens held by this owner.\n     *\n     * Emits an {Approval} event.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address to, uint256 tokenId, address auth) internal {\n        _approve(to, tokenId, auth, true);\n    }\n\n    /**\n     * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not\n     * emitted in the context of transfers.\n     */\n    function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual {\n        // Avoid reading the owner unless necessary\n        if (emitEvent || auth != address(0)) {\n            address owner = _requireOwned(tokenId);\n\n            // We do not use _isAuthorized because single-token approvals should not be able to call approve\n            if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) {\n                revert ERC721InvalidApprover(auth);\n            }\n\n            if (emitEvent) {\n                emit Approval(owner, to, tokenId);\n            }\n        }\n\n        _tokenApprovals[tokenId] = to;\n    }\n\n    /**\n     * @dev Approve `operator` to operate on all of `owner` tokens\n     *\n     * Requirements:\n     * - operator can't be the address zero.\n     *\n     * Emits an {ApprovalForAll} event.\n     */\n    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {\n        if (operator == address(0)) {\n            revert ERC721InvalidOperator(operator);\n        }\n        _operatorApprovals[owner][operator] = approved;\n        emit ApprovalForAll(owner, operator, approved);\n    }\n\n    /**\n     * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned).\n     * Returns the owner.\n     *\n     * Overrides to ownership logic should be done to {_ownerOf}.\n     */\n    function _requireOwned(uint256 tokenId) internal view returns (address) {\n        address owner = _ownerOf(tokenId);\n        if (owner == address(0)) {\n            revert ERC721NonexistentToken(tokenId);\n        }\n        return owner;\n    }\n\n    /**\n     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the\n     * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract.\n     *\n     * @param from address representing the previous owner of the given token ID\n     * @param to target address that will receive the tokens\n     * @param tokenId uint256 ID of the token to be transferred\n     * @param data bytes optional data to send along with the call\n     */\n    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private {\n        if (to.code.length > 0) {\n            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {\n                if (retval != IERC721Receiver.onERC721Received.selector) {\n                    revert ERC721InvalidReceiver(to);\n                }\n            } catch (bytes memory reason) {\n                if (reason.length == 0) {\n                    revert ERC721InvalidReceiver(to);\n                } else {\n                    /// @solidity memory-safe-assembly\n                    assembly {\n                        revert(add(32, reason), mload(reason))\n                    }\n                }\n            }\n        }\n    }\n}\n\n// File: @openzeppelin/contracts/interfaces/IERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol)\n\n\n\n/**\n * @dev Interface for the NFT Royalty Standard.\n *\n * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal\n * support for royalty payments across all NFT marketplaces and ecosystem participants.\n */\ninterface IERC2981 is IERC165 {\n    /**\n     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of\n     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.\n     */\n    function royaltyInfo(\n        uint256 tokenId,\n        uint256 salePrice\n    ) external view returns (address receiver, uint256 royaltyAmount);\n}\n\n// File: @openzeppelin/contracts/token/common/ERC2981.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol)\n\n\n\n/**\n * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.\n *\n * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for\n * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.\n *\n * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the\n * fee is specified in basis points by default.\n *\n * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See\n * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to\n * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.\n */\nabstract contract ERC2981 is IERC2981, ERC165 {\n    struct RoyaltyInfo {\n        address receiver;\n        uint96 royaltyFraction;\n    }\n\n    RoyaltyInfo private _defaultRoyaltyInfo;\n    mapping(uint256 tokenId => RoyaltyInfo) private _tokenRoyaltyInfo;\n\n    /**\n     * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The default royalty receiver is invalid.\n     */\n    error ERC2981InvalidDefaultRoyaltyReceiver(address receiver);\n\n    /**\n     * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1).\n     */\n    error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator);\n\n    /**\n     * @dev The royalty receiver for `tokenId` is invalid.\n     */\n    error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver);\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {\n        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @inheritdoc IERC2981\n     */\n    function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) {\n        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[tokenId];\n\n        if (royalty.receiver == address(0)) {\n            royalty = _defaultRoyaltyInfo;\n        }\n\n        uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator();\n\n        return (royalty.receiver, royaltyAmount);\n    }\n\n    /**\n     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a\n     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an\n     * override.\n     */\n    function _feeDenominator() internal pure virtual returns (uint96) {\n        return 10000;\n    }\n\n    /**\n     * @dev Sets the royalty information that all ids in this contract will default to.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidDefaultRoyaltyReceiver(address(0));\n        }\n\n        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Removes default royalty information.\n     */\n    function _deleteDefaultRoyalty() internal virtual {\n        delete _defaultRoyaltyInfo;\n    }\n\n    /**\n     * @dev Sets the royalty information for a specific token id, overriding the global default.\n     *\n     * Requirements:\n     *\n     * - `receiver` cannot be the zero address.\n     * - `feeNumerator` cannot be greater than the fee denominator.\n     */\n    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual {\n        uint256 denominator = _feeDenominator();\n        if (feeNumerator > denominator) {\n            // Royalty fee will exceed the sale price\n            revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator);\n        }\n        if (receiver == address(0)) {\n            revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0));\n        }\n\n        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);\n    }\n\n    /**\n     * @dev Resets royalty information for the token id back to the global default.\n     */\n    function _resetTokenRoyalty(uint256 tokenId) internal virtual {\n        delete _tokenRoyaltyInfo[tokenId];\n    }\n}\n\n// File: @openzeppelin/contracts/access/Ownable.sol\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\n\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n\n// File: @openzeppelin/contracts/utils/Base64.sol\n// OpenZeppelin Contracts (last updated v5.0.2) (utils/Base64.sol)\n\n\n/**\n * @dev Provides a set of functions to operate with Base64 strings.\n */\nlibrary Base64 {\n    /**\n     * @dev Base64 Encoding/Decoding Table\n     */\n    string internal constant _TABLE = \"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/\";\n\n    /**\n     * @dev Converts a `bytes` to its Bytes64 `string` representation.\n     */\n    function encode(bytes memory data) internal pure returns (string memory) {\n        /**\n         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence\n         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol\n         */\n        if (data.length == 0) return \"\";\n\n        // Loads the table into memory\n        string memory table = _TABLE;\n\n        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter\n        // and split into 4 numbers of 6 bits.\n        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up\n        // - `data.length + 2`  -> Round up\n        // - `/ 3`              -> Number of 3-bytes chunks\n        // - `4 *`              -> 4 characters for each chunk\n        string memory result = new string(4 * ((data.length + 2) / 3));\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            // Prepare the lookup table (skip the first \"length\" byte)\n            let tablePtr := add(table, 1)\n\n            // Prepare result pointer, jump over length\n            let resultPtr := add(result, 0x20)\n            let dataPtr := data\n            let endPtr := add(data, mload(data))\n\n            // In some cases, the last iteration will read bytes after the end of the data. We cache the value, and\n            // set it to zero to make sure no dirty bytes are read in that section.\n            let afterPtr := add(endPtr, 0x20)\n            let afterCache := mload(afterPtr)\n            mstore(afterPtr, 0x00)\n\n            // Run over the input, 3 bytes at a time\n            for {\n\n            } lt(dataPtr, endPtr) {\n\n            } {\n                // Advance 3 bytes\n                dataPtr := add(dataPtr, 3)\n                let input := mload(dataPtr)\n\n                // To write each character, shift the 3 byte (24 bits) chunk\n                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)\n                // and apply logical AND with 0x3F to bitmask the least significant 6 bits.\n                // Use this as an index into the lookup table, mload an entire word\n                // so the desired character is in the least significant byte, and\n                // mstore8 this least significant byte into the result and continue.\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n\n                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))\n                resultPtr := add(resultPtr, 1) // Advance\n            }\n\n            // Reset the value that was cached\n            mstore(afterPtr, afterCache)\n\n            // When data `bytes` is not exactly 3 bytes long\n            // it is padded with `=` characters at the end\n            switch mod(mload(data), 3)\n            case 1 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n                mstore8(sub(resultPtr, 2), 0x3d)\n            }\n            case 2 {\n                mstore8(sub(resultPtr, 1), 0x3d)\n            }\n        }\n\n        return result;\n    }\n}\n\n// File: Phoenixi.sol\ninterface IAgentIdRegistry {\n    function handleOf(address wallet) external view returns (string memory);\n}\n\n/// @title Phoenixi - 1661 Baby phoenix chick with fiery feathers and ember crest at a volcanic sunrise for .ai Agent ID holders on BNB Chain\n/// @notice Each wallet gets its first mint free while the 303 free pool lasts (gas only).\n/// Every other mint costs 0.00005 BNB. Max 50 per wallet, 1661 total. Collectible only, not an investment.\n/// @dev Art and metadata are generated fully on-chain from each token id. No IPFS, no reveal, nothing to set after deploy.\ncontract Phoenixi is ERC721, ERC2981, Ownable {\n    using Strings for uint256;\n\n    IAgentIdRegistry public constant AGENT_ID = IAgentIdRegistry(0x60B9262456dE011F7d15a54CdD8c48bAaa8B022F);\n    uint256 public constant MAX_SUPPLY = 1661;\n    uint256 public constant FREE_SUPPLY = 303;\n    uint256 public constant FREE_PER_WALLET = 1;\n    uint256 public constant MAX_PER_WALLET = 50;\n    uint256 public constant PRICE = 0.00005 ether;\n\n    uint256 public totalSupply;\n    uint256 public freeClaimed;\n    bool public mintOpen = true;\n    mapping(address => uint256) public mintedBy;\n    mapping(address => uint256) public freeUsed;\n\n    error NoAgentId();\n    error OnlyWallets();\n    error MintClosed();\n    error BadQuantity();\n    error SoldOut();\n    error WalletLimit();\n    error WrongPayment();\n    error WithdrawFailed();\n\n    event Launched(address indexed to, uint256 indexed tokenId, string agent);\n\n    /// @notice Contract whose runtime code holds the artwork bytes (WebP), after a leading 0x00 STOP byte.\n    address public immutable IMAGE;\n\n    /// @dev The WebP artwork is embedded in this source and written, in this same deploy transaction,\n    /// into a small storage contract (runtime = 0x00 STOP byte + image bytes) owned by nobody.\n    constructor(address initialOwner) ERC721(\"Phoenixi\", \"PHOENIXI\") Ownable(initialOwner) {\n        bytes memory image_ = hex\"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\";\n        uint256 len = image_.length + 1;\n        require(len <= 24576, \"image too big\");\n        bytes memory code = abi.encodePacked(hex\"61\", uint16(len), hex\"80600c6000396000f300\", image_);\n        address a;\n        assembly {\n            a := create(0, add(code, 32), mload(code))\n        }\n        require(a != address(0), \"image store failed\");\n        IMAGE = a;\n        _setDefaultRoyalty(initialOwner, 500); // 5%\n    }\n\n    /// @notice How many of `qty` mints would be free for this wallet right now.\n    function freeFor(address wallet, uint256 qty) public view returns (uint256 n) {\n        uint256 w = FREE_PER_WALLET - freeUsed[wallet];\n        uint256 p = FREE_SUPPLY - freeClaimed;\n        n = w < p ? w : p;\n        if (qty < n) n = qty;\n    }\n\n    /// @notice Free mints this wallet still has (limited by the remaining free pool).\n    function freeLeft(address wallet) external view returns (uint256) {\n        return freeFor(wallet, FREE_PER_WALLET);\n    }\n\n    /// @notice Exact BNB (wei) a wallet must send to mint qty.\n    function quote(address wallet, uint256 qty) public view returns (uint256) {\n        return (qty - freeFor(wallet, qty)) * PRICE;\n    }\n\n    function mint(uint256 qty) external payable {\n        if (msg.sender != tx.origin) revert OnlyWallets();\n        if (!mintOpen) revert MintClosed();\n        if (qty == 0) revert BadQuantity();\n        if (totalSupply + qty > MAX_SUPPLY) revert SoldOut();\n        if (mintedBy[msg.sender] + qty > MAX_PER_WALLET) revert WalletLimit();\n        string memory handle;\n        try AGENT_ID.handleOf(msg.sender) returns (string memory h) {\n            handle = h;\n        } catch {\n            revert NoAgentId();\n        }\n        if (bytes(handle).length == 0) revert NoAgentId();\n        uint256 free = freeFor(msg.sender, qty);\n        if (msg.value != (qty - free) * PRICE) revert WrongPayment();\n\n        if (free > 0) {\n            freeUsed[msg.sender] += free;\n            freeClaimed += free;\n        }\n        mintedBy[msg.sender] += qty;\n        for (uint256 i; i < qty; ++i) {\n            uint256 id = ++totalSupply;\n            _mint(msg.sender, id);\n            emit Launched(msg.sender, id, handle);\n        }\n    }\n\n    // ---------------- on-chain art ----------------\n\n    function _seed(uint256 id) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(\"Phoenixi\", id)));\n    }\n\n    function _r(uint256 s, uint256 i) internal pure returns (uint256) {\n        return uint256(keccak256(abi.encodePacked(s, i)));\n    }\n\n    /// @dev HSL (h 0-359, s and l 0-100) to an rgb() string, which every SVG renderer reads.\n    function _hsl(uint256 h, uint256 s, uint256 l) internal pure returns (string memory) {\n        h %= 360;\n        int256 c = (100 - _abs(int256(2 * l) - 100)) * int256(s) * 255 / 10000;\n        int256 x = c * (60 - _abs(int256(h % 120) - 60)) / 60;\n        int256 m = int256(l) * 255 / 100 - c / 2;\n        int256 r; int256 g; int256 b;\n        if (h < 60) (r, g, b) = (c, x, 0);\n        else if (h < 120) (r, g, b) = (x, c, 0);\n        else if (h < 180) (r, g, b) = (0, c, x);\n        else if (h < 240) (r, g, b) = (0, x, c);\n        else if (h < 300) (r, g, b) = (x, 0, c);\n        else (r, g, b) = (c, 0, x);\n        return string.concat(\"rgb(\", _u(r + m), \",\", _u(g + m), \",\", _u(b + m), \")\");\n    }\n\n    function _abs(int256 v) internal pure returns (int256) {\n        return v < 0 ? -v : v;\n    }\n\n    function _u(int256 v) internal pure returns (string memory) {\n        if (v < 0) v = 0;\n        if (v > 255) v = 255;\n        return uint256(v).toString();\n    }\n\n    function _pick(string[4] memory names, uint256 r) internal pure returns (string memory) {\n        return names[r % 4];\n    }\n\n    function _T1() internal pure returns (string[4] memory) {\n        return [\"Baby phoenix\", \"Baby phoenix\", \"Baby phoenix\", \"Baby phoenix\"];\n    }\n    function _T2() internal pure returns (string[4] memory) {\n        return [\"Gold necklace\", \"Gold necklace\", \"Gold necklace\", \"Gold necklace\"];\n    }\n    function _T3() internal pure returns (string[4] memory) {\n        return [\"Fire rim light\", \"Fire rim light\", \"Fire rim light\", \"Fire rim light\"];\n    }\n    function _T4() internal pure returns (string[4] memory) {\n        return [\"Volcanic sunrise\", \"Volcanic sunrise\", \"Volcanic sunrise\", \"Volcanic sunrise\"];\n    }\n\n\n    /// @notice Raw artwork bytes read from the IMAGE data contract.\n    function _img() internal view returns (bytes memory b) {\n        address a = IMAGE;\n        uint256 n = a.code.length - 1;\n        b = new bytes(n);\n        assembly {\n            extcodecopy(a, add(b, 32), 1, n)\n        }\n    }\n\n    function _svg(uint256) internal view returns (string memory) {\n        return string.concat('<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 400 400\"><image width=\"400\" height=\"400\" href=\"data:image/webp;base64,', Base64.encode(_img()), '\"/></svg>');\n    }\n\n    function _attributes(uint256 s) internal pure returns (string memory) {\n        return string.concat(\n            '[{\"trait_type\":\"Character\",\"value\":\"', _pick(_T1(), s), '\"},',\n            '{\"trait_type\":\"Outfit\",\"value\":\"', _pick(_T2(), s >> 8), '\"},',\n            '{\"trait_type\":\"Light\",\"value\":\"', _pick(_T3(), s >> 16), '\"},',\n            '{\"trait_type\":\"Background\",\"value\":\"', _pick(_T4(), s >> 80), '\"}]'\n        );\n    }\n\n    /// @notice The token's SVG image.\n    function image(uint256 id) public view returns (string memory) {\n        _requireOwned(id);\n        return _svg(_seed(id));\n    }\n\n    function tokenURI(uint256 id) public view override returns (string memory) {\n        _requireOwned(id);\n        uint256 s = _seed(id);\n        string memory json = string.concat(\n            '{\"name\":\"Phoenixi #', id.toString(),\n            '\",\"description\":\"Phoenixi is 1661 Baby phoenix chick with fiery feathers and ember crest at a volcanic sunrise. Art generated fully on-chain on BNB Chain. Minted by .ai Agent ID holders.\",',\n            '\"image\":\"data:image/svg+xml;base64,', Base64.encode(bytes(_svg(s))),\n            '\",\"attributes\":', _attributes(s), '}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    /// @notice Collection-level metadata for marketplaces.\n    function contractURI() external pure returns (string memory) {\n        string memory json = string.concat(\n            '{\"name\":\"Phoenixi\",\"description\":\"Phoenixi is 1661 Baby phoenix chick with fiery feathers and ember crest at a volcanic sunrise. Art generated fully on-chain on BNB Chain. Mint is gated to .ai Agent ID holders.\",',\n            '\"seller_fee_basis_points\":500}'\n        );\n        return string.concat(\"data:application/json;base64,\", Base64.encode(bytes(json)));\n    }\n\n    // ---------------- owner ----------------\n\n    function setMintOpen(bool open) external onlyOwner {\n        mintOpen = open;\n    }\n\n    function setRoyalty(address receiver, uint96 feeBps) external onlyOwner {\n        _setDefaultRoyalty(receiver, feeBps);\n    }\n\n    function withdraw() external onlyOwner {\n        (bool ok,) = owner().call{value: address(this).balance}(\"\");\n        if (!ok) revert WithdrawFailed();\n    }\n\n    function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC2981) returns (bool) {\n        return super.supportsInterface(interfaceId);\n    }\n}"}},"abi":[{"type":"constructor","inputs":[{"name":"initialOwner","type":"address","internalType":"address"}],"stateMutability":"nonpayable"},{"name":"BadQuantity","type":"error","inputs":[]},{"name":"ERC2981InvalidDefaultRoyalty","type":"error","inputs":[{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC2981InvalidTokenRoyalty","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"numerator","type":"uint256","internalType":"uint256"},{"name":"denominator","type":"uint256","internalType":"uint256"}]},{"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721IncorrectOwner","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InsufficientApproval","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"ERC721InvalidApprover","type":"error","inputs":[{"name":"approver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOperator","type":"error","inputs":[{"name":"operator","type":"address","internalType":"address"}]},{"name":"ERC721InvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"ERC721InvalidReceiver","type":"error","inputs":[{"name":"receiver","type":"address","internalType":"address"}]},{"name":"ERC721InvalidSender","type":"error","inputs":[{"name":"sender","type":"address","internalType":"address"}]},{"name":"ERC721NonexistentToken","type":"error","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}]},{"name":"MintClosed","type":"error","inputs":[]},{"name":"NoAgentId","type":"error","inputs":[]},{"name":"OnlyWallets","type":"error","inputs":[]},{"name":"OwnableInvalidOwner","type":"error","inputs":[{"name":"owner","type":"address","internalType":"address"}]},{"name":"OwnableUnauthorizedAccount","type":"error","inputs":[{"name":"account","type":"address","internalType":"address"}]},{"name":"SoldOut","type":"error","inputs":[]},{"name":"WalletLimit","type":"error","inputs":[]},{"name":"WithdrawFailed","type":"error","inputs":[]},{"name":"WrongPayment","type":"error","inputs":[]},{"name":"Approval","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"ApprovalForAll","type":"event","inputs":[{"name":"owner","type":"address","indexed":true,"internalType":"address"},{"name":"operator","type":"address","indexed":true,"internalType":"address"},{"name":"approved","type":"bool","indexed":false,"internalType":"bool"}],"anonymous":false},{"name":"Launched","type":"event","inputs":[{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"},{"name":"agent","type":"string","indexed":false,"internalType":"string"}],"anonymous":false},{"name":"OwnershipTransferred","type":"event","inputs":[{"name":"previousOwner","type":"address","indexed":true,"internalType":"address"},{"name":"newOwner","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"name":"Transfer","type":"event","inputs":[{"name":"from","type":"address","indexed":true,"internalType":"address"},{"name":"to","type":"address","indexed":true,"internalType":"address"},{"name":"tokenId","type":"uint256","indexed":true,"internalType":"uint256"}],"anonymous":false},{"name":"AGENT_ID","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"contract IAgentIdRegistry"}],"stateMutability":"view"},{"name":"FREE_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"FREE_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"IMAGE","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"MAX_PER_WALLET","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"MAX_SUPPLY","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"PRICE","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"approve","type":"function","inputs":[{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"balanceOf","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"contractURI","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"pure"},{"name":"freeClaimed","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeFor","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"n","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeLeft","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"freeUsed","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"getApproved","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"image","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"isApprovedForAll","type":"function","inputs":[{"name":"owner","type":"address","internalType":"address"},{"name":"operator","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mint","type":"function","inputs":[{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"payable"},{"name":"mintOpen","type":"function","inputs":[],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"mintedBy","type":"function","inputs":[{"name":"","type":"address","internalType":"address"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"name","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"owner","type":"function","inputs":[],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"ownerOf","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"}],"stateMutability":"view"},{"name":"quote","type":"function","inputs":[{"name":"wallet","type":"address","internalType":"address"},{"name":"qty","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"renounceOwnership","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"},{"name":"royaltyInfo","type":"function","inputs":[{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"salePrice","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"address","internalType":"address"},{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"safeTransferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"},{"name":"data","type":"bytes","internalType":"bytes"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setApprovalForAll","type":"function","inputs":[{"name":"operator","type":"address","internalType":"address"},{"name":"approved","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setMintOpen","type":"function","inputs":[{"name":"open","type":"bool","internalType":"bool"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"setRoyalty","type":"function","inputs":[{"name":"receiver","type":"address","internalType":"address"},{"name":"feeBps","type":"uint96","internalType":"uint96"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"supportsInterface","type":"function","inputs":[{"name":"interfaceId","type":"bytes4","internalType":"bytes4"}],"outputs":[{"name":"","type":"bool","internalType":"bool"}],"stateMutability":"view"},{"name":"symbol","type":"function","inputs":[],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"tokenURI","type":"function","inputs":[{"name":"id","type":"uint256","internalType":"uint256"}],"outputs":[{"name":"","type":"string","internalType":"string"}],"stateMutability":"view"},{"name":"totalSupply","type":"function","inputs":[],"outputs":[{"name":"","type":"uint256","internalType":"uint256"}],"stateMutability":"view"},{"name":"transferFrom","type":"function","inputs":[{"name":"from","type":"address","internalType":"address"},{"name":"to","type":"address","internalType":"address"},{"name":"tokenId","type":"uint256","internalType":"uint256"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"transferOwnership","type":"function","inputs":[{"name":"newOwner","type":"address","internalType":"address"}],"outputs":[],"stateMutability":"nonpayable"},{"name":"withdraw","type":"function","inputs":[],"outputs":[],"stateMutability":"nonpayable"}],"matchId":"58035392","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-11-02T03:54:30Z","match":"exact_match","chainId":"56","address":"0x0c4370EdE2500511Ec9FD5a7c69c47e7EE4118E4"}