{"sources":{"@openzeppelin/contracts-upgradeable/access/AccessControlDefaultAdminRulesUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControlDefaultAdminRules.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./AccessControlUpgradeable.sol\";\nimport \"./IAccessControlDefaultAdminRulesUpgradeable.sol\";\nimport \"../utils/math/SafeCastUpgradeable.sol\";\nimport \"../interfaces/IERC5313Upgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Extension of {AccessControl} that allows specifying special rules to manage\n * the `DEFAULT_ADMIN_ROLE` holder, which is a sensitive role with special permissions\n * over other roles that may potentially have privileged rights in the system.\n *\n * If a specific role doesn't have an admin role assigned, the holder of the\n * `DEFAULT_ADMIN_ROLE` will have the ability to grant it and revoke it.\n *\n * This contract implements the following risk mitigations on top of {AccessControl}:\n *\n * * Only one account holds the `DEFAULT_ADMIN_ROLE` since deployment until it's potentially renounced.\n * * Enforces a 2-step process to transfer the `DEFAULT_ADMIN_ROLE` to another account.\n * * Enforces a configurable delay between the two steps, with the ability to cancel before the transfer is accepted.\n * * The delay can be changed by scheduling, see {changeDefaultAdminDelay}.\n * * It is not possible to use another role to manage the `DEFAULT_ADMIN_ROLE`.\n *\n * Example usage:\n *\n * ```solidity\n * contract MyToken is AccessControlDefaultAdminRules {\n *   constructor() AccessControlDefaultAdminRules(\n *     3 days,\n *     msg.sender // Explicit initial `DEFAULT_ADMIN_ROLE` holder\n *    ) {}\n * }\n * ```\n *\n * _Available since v4.9._\n */\nabstract contract AccessControlDefaultAdminRulesUpgradeable is Initializable, IAccessControlDefaultAdminRulesUpgradeable, IERC5313Upgradeable, AccessControlUpgradeable {\n    // pending admin pair read/written together frequently\n    address private _pendingDefaultAdmin;\n    uint48 private _pendingDefaultAdminSchedule; // 0 == unset\n\n    uint48 private _currentDelay;\n    address private _currentDefaultAdmin;\n\n    // pending delay pair read/written together frequently\n    uint48 private _pendingDelay;\n    uint48 private _pendingDelaySchedule; // 0 == unset\n\n    /**\n     * @dev Sets the initial values for {defaultAdminDelay} and {defaultAdmin} address.\n     */\n    function __AccessControlDefaultAdminRules_init(uint48 initialDelay, address initialDefaultAdmin) internal onlyInitializing {\n        __AccessControlDefaultAdminRules_init_unchained(initialDelay, initialDefaultAdmin);\n    }\n\n    function __AccessControlDefaultAdminRules_init_unchained(uint48 initialDelay, address initialDefaultAdmin) internal onlyInitializing {\n        require(initialDefaultAdmin != address(0), \"AccessControl: 0 default admin\");\n        _currentDelay = initialDelay;\n        _grantRole(DEFAULT_ADMIN_ROLE, initialDefaultAdmin);\n    }\n\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IAccessControlDefaultAdminRulesUpgradeable).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev See {IERC5313-owner}.\n     */\n    function owner() public view virtual returns (address) {\n        return defaultAdmin();\n    }\n\n    ///\n    /// Override AccessControl role management\n    ///\n\n    /**\n     * @dev See {AccessControl-grantRole}. Reverts for `DEFAULT_ADMIN_ROLE`.\n     */\n    function grantRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {\n        require(role != DEFAULT_ADMIN_ROLE, \"AccessControl: can't directly grant default admin role\");\n        super.grantRole(role, account);\n    }\n\n    /**\n     * @dev See {AccessControl-revokeRole}. Reverts for `DEFAULT_ADMIN_ROLE`.\n     */\n    function revokeRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {\n        require(role != DEFAULT_ADMIN_ROLE, \"AccessControl: can't directly revoke default admin role\");\n        super.revokeRole(role, account);\n    }\n\n    /**\n     * @dev See {AccessControl-renounceRole}.\n     *\n     * For the `DEFAULT_ADMIN_ROLE`, it only allows renouncing in two steps by first calling\n     * {beginDefaultAdminTransfer} to the `address(0)`, so it's required that the {pendingDefaultAdmin} schedule\n     * has also passed when calling this function.\n     *\n     * After its execution, it will not be possible to call `onlyRole(DEFAULT_ADMIN_ROLE)` functions.\n     *\n     * NOTE: Renouncing `DEFAULT_ADMIN_ROLE` will leave the contract without a {defaultAdmin},\n     * thereby disabling any functionality that is only available for it, and the possibility of reassigning a\n     * non-administrated role.\n     */\n    function renounceRole(bytes32 role, address account) public virtual override(AccessControlUpgradeable, IAccessControlUpgradeable) {\n        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {\n            (address newDefaultAdmin, uint48 schedule) = pendingDefaultAdmin();\n            require(\n                newDefaultAdmin == address(0) && _isScheduleSet(schedule) && _hasSchedulePassed(schedule),\n                \"AccessControl: only can renounce in two delayed steps\"\n            );\n            delete _pendingDefaultAdminSchedule;\n        }\n        super.renounceRole(role, account);\n    }\n\n    /**\n     * @dev See {AccessControl-_grantRole}.\n     *\n     * For `DEFAULT_ADMIN_ROLE`, it only allows granting if there isn't already a {defaultAdmin} or if the\n     * role has been previously renounced.\n     *\n     * NOTE: Exposing this function through another mechanism may make the `DEFAULT_ADMIN_ROLE`\n     * assignable again. Make sure to guarantee this is the expected behavior in your implementation.\n     */\n    function _grantRole(bytes32 role, address account) internal virtual override {\n        if (role == DEFAULT_ADMIN_ROLE) {\n            require(defaultAdmin() == address(0), \"AccessControl: default admin already granted\");\n            _currentDefaultAdmin = account;\n        }\n        super._grantRole(role, account);\n    }\n\n    /**\n     * @dev See {AccessControl-_revokeRole}.\n     */\n    function _revokeRole(bytes32 role, address account) internal virtual override {\n        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {\n            delete _currentDefaultAdmin;\n        }\n        super._revokeRole(role, account);\n    }\n\n    /**\n     * @dev See {AccessControl-_setRoleAdmin}. Reverts for `DEFAULT_ADMIN_ROLE`.\n     */\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual override {\n        require(role != DEFAULT_ADMIN_ROLE, \"AccessControl: can't violate default admin rules\");\n        super._setRoleAdmin(role, adminRole);\n    }\n\n    ///\n    /// AccessControlDefaultAdminRules accessors\n    ///\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function defaultAdmin() public view virtual returns (address) {\n        return _currentDefaultAdmin;\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function pendingDefaultAdmin() public view virtual returns (address newAdmin, uint48 schedule) {\n        return (_pendingDefaultAdmin, _pendingDefaultAdminSchedule);\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function defaultAdminDelay() public view virtual returns (uint48) {\n        uint48 schedule = _pendingDelaySchedule;\n        return (_isScheduleSet(schedule) && _hasSchedulePassed(schedule)) ? _pendingDelay : _currentDelay;\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function pendingDefaultAdminDelay() public view virtual returns (uint48 newDelay, uint48 schedule) {\n        schedule = _pendingDelaySchedule;\n        return (_isScheduleSet(schedule) && !_hasSchedulePassed(schedule)) ? (_pendingDelay, schedule) : (0, 0);\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function defaultAdminDelayIncreaseWait() public view virtual returns (uint48) {\n        return 5 days;\n    }\n\n    ///\n    /// AccessControlDefaultAdminRules public and internal setters for defaultAdmin/pendingDefaultAdmin\n    ///\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function beginDefaultAdminTransfer(address newAdmin) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {\n        _beginDefaultAdminTransfer(newAdmin);\n    }\n\n    /**\n     * @dev See {beginDefaultAdminTransfer}.\n     *\n     * Internal function without access restriction.\n     */\n    function _beginDefaultAdminTransfer(address newAdmin) internal virtual {\n        uint48 newSchedule = SafeCastUpgradeable.toUint48(block.timestamp) + defaultAdminDelay();\n        _setPendingDefaultAdmin(newAdmin, newSchedule);\n        emit DefaultAdminTransferScheduled(newAdmin, newSchedule);\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function cancelDefaultAdminTransfer() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {\n        _cancelDefaultAdminTransfer();\n    }\n\n    /**\n     * @dev See {cancelDefaultAdminTransfer}.\n     *\n     * Internal function without access restriction.\n     */\n    function _cancelDefaultAdminTransfer() internal virtual {\n        _setPendingDefaultAdmin(address(0), 0);\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function acceptDefaultAdminTransfer() public virtual {\n        (address newDefaultAdmin, ) = pendingDefaultAdmin();\n        require(_msgSender() == newDefaultAdmin, \"AccessControl: pending admin must accept\");\n        _acceptDefaultAdminTransfer();\n    }\n\n    /**\n     * @dev See {acceptDefaultAdminTransfer}.\n     *\n     * Internal function without access restriction.\n     */\n    function _acceptDefaultAdminTransfer() internal virtual {\n        (address newAdmin, uint48 schedule) = pendingDefaultAdmin();\n        require(_isScheduleSet(schedule) && _hasSchedulePassed(schedule), \"AccessControl: transfer delay not passed\");\n        _revokeRole(DEFAULT_ADMIN_ROLE, defaultAdmin());\n        _grantRole(DEFAULT_ADMIN_ROLE, newAdmin);\n        delete _pendingDefaultAdmin;\n        delete _pendingDefaultAdminSchedule;\n    }\n\n    ///\n    /// AccessControlDefaultAdminRules public and internal setters for defaultAdminDelay/pendingDefaultAdminDelay\n    ///\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function changeDefaultAdminDelay(uint48 newDelay) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {\n        _changeDefaultAdminDelay(newDelay);\n    }\n\n    /**\n     * @dev See {changeDefaultAdminDelay}.\n     *\n     * Internal function without access restriction.\n     */\n    function _changeDefaultAdminDelay(uint48 newDelay) internal virtual {\n        uint48 newSchedule = SafeCastUpgradeable.toUint48(block.timestamp) + _delayChangeWait(newDelay);\n        _setPendingDelay(newDelay, newSchedule);\n        emit DefaultAdminDelayChangeScheduled(newDelay, newSchedule);\n    }\n\n    /**\n     * @inheritdoc IAccessControlDefaultAdminRulesUpgradeable\n     */\n    function rollbackDefaultAdminDelay() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {\n        _rollbackDefaultAdminDelay();\n    }\n\n    /**\n     * @dev See {rollbackDefaultAdminDelay}.\n     *\n     * Internal function without access restriction.\n     */\n    function _rollbackDefaultAdminDelay() internal virtual {\n        _setPendingDelay(0, 0);\n    }\n\n    /**\n     * @dev Returns the amount of seconds to wait after the `newDelay` will\n     * become the new {defaultAdminDelay}.\n     *\n     * The value returned guarantees that if the delay is reduced, it will go into effect\n     * after a wait that honors the previously set delay.\n     *\n     * See {defaultAdminDelayIncreaseWait}.\n     */\n    function _delayChangeWait(uint48 newDelay) internal view virtual returns (uint48) {\n        uint48 currentDelay = defaultAdminDelay();\n\n        // When increasing the delay, we schedule the delay change to occur after a period of \"new delay\" has passed, up\n        // to a maximum given by defaultAdminDelayIncreaseWait, by default 5 days. For example, if increasing from 1 day\n        // to 3 days, the new delay will come into effect after 3 days. If increasing from 1 day to 10 days, the new\n        // delay will come into effect after 5 days. The 5 day wait period is intended to be able to fix an error like\n        // using milliseconds instead of seconds.\n        //\n        // When decreasing the delay, we wait the difference between \"current delay\" and \"new delay\". This guarantees\n        // that an admin transfer cannot be made faster than \"current delay\" at the time the delay change is scheduled.\n        // For example, if decreasing from 10 days to 3 days, the new delay will come into effect after 7 days.\n        return\n            newDelay > currentDelay\n                ? uint48(MathUpgradeable.min(newDelay, defaultAdminDelayIncreaseWait())) // no need to safecast, both inputs are uint48\n                : currentDelay - newDelay;\n    }\n\n    ///\n    /// Private setters\n    ///\n\n    /**\n     * @dev Setter of the tuple for pending admin and its schedule.\n     *\n     * May emit a DefaultAdminTransferCanceled event.\n     */\n    function _setPendingDefaultAdmin(address newAdmin, uint48 newSchedule) private {\n        (, uint48 oldSchedule) = pendingDefaultAdmin();\n\n        _pendingDefaultAdmin = newAdmin;\n        _pendingDefaultAdminSchedule = newSchedule;\n\n        // An `oldSchedule` from `pendingDefaultAdmin()` is only set if it hasn't been accepted.\n        if (_isScheduleSet(oldSchedule)) {\n            // Emit for implicit cancellations when another default admin was scheduled.\n            emit DefaultAdminTransferCanceled();\n        }\n    }\n\n    /**\n     * @dev Setter of the tuple for pending delay and its schedule.\n     *\n     * May emit a DefaultAdminDelayChangeCanceled event.\n     */\n    function _setPendingDelay(uint48 newDelay, uint48 newSchedule) private {\n        uint48 oldSchedule = _pendingDelaySchedule;\n\n        if (_isScheduleSet(oldSchedule)) {\n            if (_hasSchedulePassed(oldSchedule)) {\n                // Materialize a virtual delay\n                _currentDelay = _pendingDelay;\n            } else {\n                // Emit for implicit cancellations when another delay was scheduled.\n                emit DefaultAdminDelayChangeCanceled();\n            }\n        }\n\n        _pendingDelay = newDelay;\n        _pendingDelaySchedule = newSchedule;\n    }\n\n    ///\n    /// Private helpers\n    ///\n\n    /**\n     * @dev Defines if an `schedule` is considered set. For consistency purposes.\n     */\n    function _isScheduleSet(uint48 schedule) private pure returns (bool) {\n        return schedule != 0;\n    }\n\n    /**\n     * @dev Defines if an `schedule` is considered passed. For consistency purposes.\n     */\n    function _hasSchedulePassed(uint48 schedule) private view returns (bool) {\n        return schedule < block.timestamp;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[48] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IAccessControlUpgradeable.sol\";\nimport \"../utils/ContextUpgradeable.sol\";\nimport \"../utils/StringsUpgradeable.sol\";\nimport \"../utils/introspection/ERC165Upgradeable.sol\";\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Contract module that allows children to implement role-based access\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\n * members except through off-chain means by accessing the contract event logs. Some\n * applications may benefit from on-chain enumerability, for those cases see\n * {AccessControlEnumerable}.\n *\n * Roles are referred to by their `bytes32` identifier. These should be exposed\n * in the external API and be unique. The best way to achieve this is by\n * using `public constant` hash digests:\n *\n * ```solidity\n * bytes32 public constant MY_ROLE = keccak256(\"MY_ROLE\");\n * ```\n *\n * Roles can be used to represent a set of permissions. To restrict access to a\n * function call, use {hasRole}:\n *\n * ```solidity\n * function foo() public {\n *     require(hasRole(MY_ROLE, msg.sender));\n *     ...\n * }\n * ```\n *\n * Roles can be granted and revoked dynamically via the {grantRole} and\n * {revokeRole} functions. Each role has an associated admin role, and only\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\n *\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\n * that only accounts with this role will be able to grant or revoke other\n * roles. More complex role relationships can be created by using\n * {_setRoleAdmin}.\n *\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\n * grant and revoke this role. Extra precautions should be taken to secure\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\n * to enforce additional security measures for this role.\n */\nabstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {\n    struct RoleData {\n        mapping(address => bool) members;\n        bytes32 adminRole;\n    }\n\n    mapping(bytes32 => RoleData) private _roles;\n\n    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\n\n    /**\n     * @dev Modifier that checks that an account has a specific role. Reverts\n     * with a standardized message including the required role.\n     *\n     * The format of the revert reason is given by the following regular expression:\n     *\n     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/\n     *\n     * _Available since v4.1._\n     */\n    modifier onlyRole(bytes32 role) {\n        _checkRole(role);\n        _;\n    }\n\n    function __AccessControl_init() internal onlyInitializing {\n    }\n\n    function __AccessControl_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);\n    }\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {\n        return _roles[role].members[account];\n    }\n\n    /**\n     * @dev Revert with a standard message if `_msgSender()` is missing `role`.\n     * Overriding this function changes the behavior of the {onlyRole} modifier.\n     *\n     * Format of the revert message is described in {_checkRole}.\n     *\n     * _Available since v4.6._\n     */\n    function _checkRole(bytes32 role) internal view virtual {\n        _checkRole(role, _msgSender());\n    }\n\n    /**\n     * @dev Revert with a standard message if `account` is missing `role`.\n     *\n     * The format of the revert reason is given by the following regular expression:\n     *\n     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/\n     */\n    function _checkRole(bytes32 role, address account) internal view virtual {\n        if (!hasRole(role, account)) {\n            revert(\n                string(\n                    abi.encodePacked(\n                        \"AccessControl: account \",\n                        StringsUpgradeable.toHexString(account),\n                        \" is missing role \",\n                        StringsUpgradeable.toHexString(uint256(role), 32)\n                    )\n                )\n            );\n        }\n    }\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {\n        return _roles[role].adminRole;\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {\n        _grantRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {\n        _revokeRole(role, account);\n    }\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been revoked `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `account`.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function renounceRole(bytes32 role, address account) public virtual override {\n        require(account == _msgSender(), \"AccessControl: can only renounce roles for self\");\n\n        _revokeRole(role, account);\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event. Note that unlike {grantRole}, this function doesn't perform any\n     * checks on the calling account.\n     *\n     * May emit a {RoleGranted} event.\n     *\n     * [WARNING]\n     * ====\n     * This function should only be called from the constructor when setting\n     * up the initial roles for the system.\n     *\n     * Using this function in any other way is effectively circumventing the admin\n     * system imposed by {AccessControl}.\n     * ====\n     *\n     * NOTE: This function is deprecated in favor of {_grantRole}.\n     */\n    function _setupRole(bytes32 role, address account) internal virtual {\n        _grantRole(role, account);\n    }\n\n    /**\n     * @dev Sets `adminRole` as ``role``'s admin role.\n     *\n     * Emits a {RoleAdminChanged} event.\n     */\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\n        bytes32 previousAdminRole = getRoleAdmin(role);\n        _roles[role].adminRole = adminRole;\n        emit RoleAdminChanged(role, previousAdminRole, adminRole);\n    }\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleGranted} event.\n     */\n    function _grantRole(bytes32 role, address account) internal virtual {\n        if (!hasRole(role, account)) {\n            _roles[role].members[account] = true;\n            emit RoleGranted(role, account, _msgSender());\n        }\n    }\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * Internal function without access restriction.\n     *\n     * May emit a {RoleRevoked} event.\n     */\n    function _revokeRole(bytes32 role, address account) internal virtual {\n        if (hasRole(role, account)) {\n            _roles[role].members[account] = false;\n            emit RoleRevoked(role, account, _msgSender());\n        }\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[49] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/access/IAccessControlDefaultAdminRulesUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (access/IAccessControlDefaultAdminRules.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IAccessControlUpgradeable.sol\";\n\n/**\n * @dev External interface of AccessControlDefaultAdminRules declared to support ERC165 detection.\n *\n * _Available since v4.9._\n */\ninterface IAccessControlDefaultAdminRulesUpgradeable is IAccessControlUpgradeable {\n    /**\n     * @dev Emitted when a {defaultAdmin} transfer is started, setting `newAdmin` as the next\n     * address to become the {defaultAdmin} by calling {acceptDefaultAdminTransfer} only after `acceptSchedule`\n     * passes.\n     */\n    event DefaultAdminTransferScheduled(address indexed newAdmin, uint48 acceptSchedule);\n\n    /**\n     * @dev Emitted when a {pendingDefaultAdmin} is reset if it was never accepted, regardless of its schedule.\n     */\n    event DefaultAdminTransferCanceled();\n\n    /**\n     * @dev Emitted when a {defaultAdminDelay} change is started, setting `newDelay` as the next\n     * delay to be applied between default admin transfer after `effectSchedule` has passed.\n     */\n    event DefaultAdminDelayChangeScheduled(uint48 newDelay, uint48 effectSchedule);\n\n    /**\n     * @dev Emitted when a {pendingDefaultAdminDelay} is reset if its schedule didn't pass.\n     */\n    event DefaultAdminDelayChangeCanceled();\n\n    /**\n     * @dev Returns the address of the current `DEFAULT_ADMIN_ROLE` holder.\n     */\n    function defaultAdmin() external view returns (address);\n\n    /**\n     * @dev Returns a tuple of a `newAdmin` and an accept schedule.\n     *\n     * After the `schedule` passes, the `newAdmin` will be able to accept the {defaultAdmin} role\n     * by calling {acceptDefaultAdminTransfer}, completing the role transfer.\n     *\n     * A zero value only in `acceptSchedule` indicates no pending admin transfer.\n     *\n     * NOTE: A zero address `newAdmin` means that {defaultAdmin} is being renounced.\n     */\n    function pendingDefaultAdmin() external view returns (address newAdmin, uint48 acceptSchedule);\n\n    /**\n     * @dev Returns the delay required to schedule the acceptance of a {defaultAdmin} transfer started.\n     *\n     * This delay will be added to the current timestamp when calling {beginDefaultAdminTransfer} to set\n     * the acceptance schedule.\n     *\n     * NOTE: If a delay change has been scheduled, it will take effect as soon as the schedule passes, making this\n     * function returns the new delay. See {changeDefaultAdminDelay}.\n     */\n    function defaultAdminDelay() external view returns (uint48);\n\n    /**\n     * @dev Returns a tuple of `newDelay` and an effect schedule.\n     *\n     * After the `schedule` passes, the `newDelay` will get into effect immediately for every\n     * new {defaultAdmin} transfer started with {beginDefaultAdminTransfer}.\n     *\n     * A zero value only in `effectSchedule` indicates no pending delay change.\n     *\n     * NOTE: A zero value only for `newDelay` means that the next {defaultAdminDelay}\n     * will be zero after the effect schedule.\n     */\n    function pendingDefaultAdminDelay() external view returns (uint48 newDelay, uint48 effectSchedule);\n\n    /**\n     * @dev Starts a {defaultAdmin} transfer by setting a {pendingDefaultAdmin} scheduled for acceptance\n     * after the current timestamp plus a {defaultAdminDelay}.\n     *\n     * Requirements:\n     *\n     * - Only can be called by the current {defaultAdmin}.\n     *\n     * Emits a DefaultAdminRoleChangeStarted event.\n     */\n    function beginDefaultAdminTransfer(address newAdmin) external;\n\n    /**\n     * @dev Cancels a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.\n     *\n     * A {pendingDefaultAdmin} not yet accepted can also be cancelled with this function.\n     *\n     * Requirements:\n     *\n     * - Only can be called by the current {defaultAdmin}.\n     *\n     * May emit a DefaultAdminTransferCanceled event.\n     */\n    function cancelDefaultAdminTransfer() external;\n\n    /**\n     * @dev Completes a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.\n     *\n     * After calling the function:\n     *\n     * - `DEFAULT_ADMIN_ROLE` should be granted to the caller.\n     * - `DEFAULT_ADMIN_ROLE` should be revoked from the previous holder.\n     * - {pendingDefaultAdmin} should be reset to zero values.\n     *\n     * Requirements:\n     *\n     * - Only can be called by the {pendingDefaultAdmin}'s `newAdmin`.\n     * - The {pendingDefaultAdmin}'s `acceptSchedule` should've passed.\n     */\n    function acceptDefaultAdminTransfer() external;\n\n    /**\n     * @dev Initiates a {defaultAdminDelay} update by setting a {pendingDefaultAdminDelay} scheduled for getting\n     * into effect after the current timestamp plus a {defaultAdminDelay}.\n     *\n     * This function guarantees that any call to {beginDefaultAdminTransfer} done between the timestamp this\n     * method is called and the {pendingDefaultAdminDelay} effect schedule will use the current {defaultAdminDelay}\n     * set before calling.\n     *\n     * The {pendingDefaultAdminDelay}'s effect schedule is defined in a way that waiting until the schedule and then\n     * calling {beginDefaultAdminTransfer} with the new delay will take at least the same as another {defaultAdmin}\n     * complete transfer (including acceptance).\n     *\n     * The schedule is designed for two scenarios:\n     *\n     * - When the delay is changed for a larger one the schedule is `block.timestamp + newDelay` capped by\n     * {defaultAdminDelayIncreaseWait}.\n     * - When the delay is changed for a shorter one, the schedule is `block.timestamp + (current delay - new delay)`.\n     *\n     * A {pendingDefaultAdminDelay} that never got into effect will be canceled in favor of a new scheduled change.\n     *\n     * Requirements:\n     *\n     * - Only can be called by the current {defaultAdmin}.\n     *\n     * Emits a DefaultAdminDelayChangeScheduled event and may emit a DefaultAdminDelayChangeCanceled event.\n     */\n    function changeDefaultAdminDelay(uint48 newDelay) external;\n\n    /**\n     * @dev Cancels a scheduled {defaultAdminDelay} change.\n     *\n     * Requirements:\n     *\n     * - Only can be called by the current {defaultAdmin}.\n     *\n     * May emit a DefaultAdminDelayChangeCanceled event.\n     */\n    function rollbackDefaultAdminDelay() external;\n\n    /**\n     * @dev Maximum time in seconds for an increase to {defaultAdminDelay} (that is scheduled using {changeDefaultAdminDelay})\n     * to take effect. Default to 5 days.\n     *\n     * When the {defaultAdminDelay} is scheduled to be increased, it goes into effect after the new delay has passed with\n     * the purpose of giving enough time for reverting any accidental change (i.e. using milliseconds instead of seconds)\n     * that may lock the contract. However, to avoid excessive schedules, the wait is capped by this function and it can\n     * be overrode for a custom {defaultAdminDelay} increase scheduling.\n     *\n     * IMPORTANT: Make sure to add a reasonable amount of time while overriding this value, otherwise,\n     * there's a risk of setting a high new delay that goes into effect almost immediately without the\n     * possibility of human intervention in the case of an input error (eg. set milliseconds instead of seconds).\n     */\n    function defaultAdminDelayIncreaseWait() external view returns (uint48);\n}\n"},"@openzeppelin/contracts-upgradeable/access/IAccessControlUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev External interface of AccessControl declared to support ERC165 detection.\n */\ninterface IAccessControlUpgradeable {\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted signaling this.\n     *\n     * _Available since v3.1._\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call, an admin role\n     * bearer except when using {AccessControl-_setupRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `account`.\n     */\n    function renounceRole(bytes32 role, address account) external;\n}\n"},"@openzeppelin/contracts-upgradeable/interfaces/draft-IERC1822Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\n * proxy whose upgrades are fully controlled by the current implementation.\n */\ninterface IERC1822ProxiableUpgradeable {\n    /**\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\n     * address.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy.\n     */\n    function proxiableUUID() external view returns (bytes32);\n}\n"},"@openzeppelin/contracts-upgradeable/interfaces/IERC1967Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1967.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.\n *\n * _Available since v4.8.3._\n */\ninterface IERC1967Upgradeable {\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n}\n"},"@openzeppelin/contracts-upgradeable/interfaces/IERC5313Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5313.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface for the Light Contract Ownership Standard.\n *\n * A standardized minimal interface required to identify an account that controls a contract\n *\n * _Available since v4.9._\n */\ninterface IERC5313Upgradeable {\n    /**\n     * @dev Gets the address of the owner.\n     */\n    function owner() external view returns (address);\n}\n"},"@openzeppelin/contracts-upgradeable/proxy/beacon/IBeaconUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeaconUpgradeable {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {BeaconProxy} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"},"@openzeppelin/contracts-upgradeable/proxy/ERC1967/ERC1967UpgradeUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/ERC1967/ERC1967Upgrade.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../beacon/IBeaconUpgradeable.sol\";\nimport \"../../interfaces/IERC1967Upgradeable.sol\";\nimport \"../../interfaces/draft-IERC1822Upgradeable.sol\";\nimport \"../../utils/AddressUpgradeable.sol\";\nimport \"../../utils/StorageSlotUpgradeable.sol\";\nimport {Initializable} from \"../utils/Initializable.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n *\n * _Available since v4.1._\n */\nabstract contract ERC1967UpgradeUpgradeable is Initializable, IERC1967Upgradeable {\n    // This is the keccak-256 hash of \"eip1967.proxy.rollback\" subtracted by 1\n    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;\n\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    function __ERC1967Upgrade_init() internal onlyInitializing {\n    }\n\n    function __ERC1967Upgrade_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function _getImplementation() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        require(AddressUpgradeable.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n        StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Perform implementation upgrade\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeTo(address newImplementation) internal {\n        _setImplementation(newImplementation);\n        emit Upgraded(newImplementation);\n    }\n\n    /**\n     * @dev Perform implementation upgrade with additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {\n        _upgradeTo(newImplementation);\n        if (data.length > 0 || forceCall) {\n            AddressUpgradeable.functionDelegateCall(newImplementation, data);\n        }\n    }\n\n    /**\n     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.\n     *\n     * Emits an {Upgraded} event.\n     */\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data, bool forceCall) internal {\n        // Upgrades from old implementations will perform a rollback test. This test requires the new\n        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing\n        // this special case will break upgrade paths from old UUPS implementation to new ones.\n        if (StorageSlotUpgradeable.getBooleanSlot(_ROLLBACK_SLOT).value) {\n            _setImplementation(newImplementation);\n        } else {\n            try IERC1822ProxiableUpgradeable(newImplementation).proxiableUUID() returns (bytes32 slot) {\n                require(slot == _IMPLEMENTATION_SLOT, \"ERC1967Upgrade: unsupported proxiableUUID\");\n            } catch {\n                revert(\"ERC1967Upgrade: new implementation is not UUPS\");\n            }\n            _upgradeToAndCall(newImplementation, data, forceCall);\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1, and is\n     * validated in the constructor.\n     */\n    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     */\n    function _getAdmin() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        require(newAdmin != address(0), \"ERC1967: new admin is the zero address\");\n        StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {AdminChanged} event.\n     */\n    function _changeAdmin(address newAdmin) internal {\n        emit AdminChanged(_getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.\n     */\n    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function _getBeacon() internal view returns (address) {\n        return StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        require(AddressUpgradeable.isContract(newBeacon), \"ERC1967: new beacon is not a contract\");\n        require(\n            AddressUpgradeable.isContract(IBeaconUpgradeable(newBeacon).implementation()),\n            \"ERC1967: beacon implementation is not a contract\"\n        );\n        StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value = newBeacon;\n    }\n\n    /**\n     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does\n     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).\n     *\n     * Emits a {BeaconUpgraded} event.\n     */\n    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {\n        _setBeacon(newBeacon);\n        emit BeaconUpgraded(newBeacon);\n        if (data.length > 0 || forceCall) {\n            AddressUpgradeable.functionDelegateCall(IBeaconUpgradeable(newBeacon).implementation(), data);\n        }\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)\n\npragma solidity ^0.8.2;\n\nimport \"../../utils/AddressUpgradeable.sol\";\n\n/**\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\n *\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\n * reused. This mechanism prevents re-execution of each \"step\" but allows the creation of new initialization steps in\n * case an upgrade adds a module that needs to be initialized.\n *\n * For example:\n *\n * [.hljs-theme-light.nopadding]\n * ```solidity\n * contract MyToken is ERC20Upgradeable {\n *     function initialize() initializer public {\n *         __ERC20_init(\"MyToken\", \"MTK\");\n *     }\n * }\n *\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\n *     function initializeV2() reinitializer(2) public {\n *         __ERC20Permit_init(\"MyToken\");\n *     }\n * }\n * ```\n *\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\n *\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\n *\n * [CAUTION]\n * ====\n * Avoid leaving a contract uninitialized.\n *\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\n *\n * [.hljs-theme-light.nopadding]\n * ```\n * /// @custom:oz-upgrades-unsafe-allow constructor\n * constructor() {\n *     _disableInitializers();\n * }\n * ```\n * ====\n */\nabstract contract Initializable {\n    /**\n     * @dev Indicates that the contract has been initialized.\n     * @custom:oz-retyped-from bool\n     */\n    uint8 private _initialized;\n\n    /**\n     * @dev Indicates that the contract is in the process of being initialized.\n     */\n    bool private _initializing;\n\n    /**\n     * @dev Triggered when the contract has been initialized or reinitialized.\n     */\n    event Initialized(uint8 version);\n\n    /**\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\n     * `onlyInitializing` functions can be used to initialize parent contracts.\n     *\n     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a\n     * constructor.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier initializer() {\n        bool isTopLevelCall = !_initializing;\n        require(\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\n            \"Initializable: contract is already initialized\"\n        );\n        _initialized = 1;\n        if (isTopLevelCall) {\n            _initializing = true;\n        }\n        _;\n        if (isTopLevelCall) {\n            _initializing = false;\n            emit Initialized(1);\n        }\n    }\n\n    /**\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\n     * used to initialize parent contracts.\n     *\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\n     * are added through upgrades and that require initialization.\n     *\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\n     *\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\n     * a contract, executing them in the right order is up to the developer or operator.\n     *\n     * WARNING: setting the version to 255 will prevent any future reinitialization.\n     *\n     * Emits an {Initialized} event.\n     */\n    modifier reinitializer(uint8 version) {\n        require(!_initializing && _initialized < version, \"Initializable: contract is already initialized\");\n        _initialized = version;\n        _initializing = true;\n        _;\n        _initializing = false;\n        emit Initialized(version);\n    }\n\n    /**\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\n     */\n    modifier onlyInitializing() {\n        require(_initializing, \"Initializable: contract is not initializing\");\n        _;\n    }\n\n    /**\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\n     * through proxies.\n     *\n     * Emits an {Initialized} event the first time it is successfully executed.\n     */\n    function _disableInitializers() internal virtual {\n        require(!_initializing, \"Initializable: contract is initializing\");\n        if (_initialized != type(uint8).max) {\n            _initialized = type(uint8).max;\n            emit Initialized(type(uint8).max);\n        }\n    }\n\n    /**\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\n     */\n    function _getInitializedVersion() internal view returns (uint8) {\n        return _initialized;\n    }\n\n    /**\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\n     */\n    function _isInitializing() internal view returns (bool) {\n        return _initializing;\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/UUPSUpgradeable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../../interfaces/draft-IERC1822Upgradeable.sol\";\nimport \"../ERC1967/ERC1967UpgradeUpgradeable.sol\";\nimport {Initializable} from \"./Initializable.sol\";\n\n/**\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\n *\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\n * `UUPSUpgradeable` with a custom implementation of upgrades.\n *\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\n *\n * _Available since v4.1._\n */\nabstract contract UUPSUpgradeable is Initializable, IERC1822ProxiableUpgradeable, ERC1967UpgradeUpgradeable {\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment\n    address private immutable __self = address(this);\n\n    /**\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\n     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\n     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\n     * fail.\n     */\n    modifier onlyProxy() {\n        require(address(this) != __self, \"Function must be called through delegatecall\");\n        require(_getImplementation() == __self, \"Function must be called through active proxy\");\n        _;\n    }\n\n    /**\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\n     * callable on the implementing contract but not through proxies.\n     */\n    modifier notDelegated() {\n        require(address(this) == __self, \"UUPSUpgradeable: must not be called through delegatecall\");\n        _;\n    }\n\n    function __UUPSUpgradeable_init() internal onlyInitializing {\n    }\n\n    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\n     *\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\n     */\n    function proxiableUUID() external view virtual override notDelegated returns (bytes32) {\n        return _IMPLEMENTATION_SLOT;\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeTo(address newImplementation) public virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, new bytes(0), false);\n    }\n\n    /**\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\n     * encoded in `data`.\n     *\n     * Calls {_authorizeUpgrade}.\n     *\n     * Emits an {Upgraded} event.\n     *\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\n        _authorizeUpgrade(newImplementation);\n        _upgradeToAndCallUUPS(newImplementation, data, true);\n    }\n\n    /**\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\n     * {upgradeTo} and {upgradeToAndCall}.\n     *\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\n     *\n     * ```solidity\n     * function _authorizeUpgrade(address) internal override onlyOwner {}\n     * ```\n     */\n    function _authorizeUpgrade(address newImplementation) internal virtual;\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary AddressUpgradeable {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     *\n     * Furthermore, `isContract` will also return true if the target contract within\n     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,\n     * which only has an effect at the end of a transaction.\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)\n\npragma solidity ^0.8.0;\nimport {Initializable} from \"../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract ContextUpgradeable is Initializable {\n    function __Context_init() internal onlyInitializing {\n    }\n\n    function __Context_init_unchained() internal onlyInitializing {\n    }\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC165Upgradeable.sol\";\nimport {Initializable} from \"../../proxy/utils/Initializable.sol\";\n\n/**\n * @dev Implementation of the {IERC165} interface.\n *\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\n * for the additional interface id that will be supported. For example:\n *\n * ```solidity\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\n * }\n * ```\n *\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\n */\nabstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {\n    function __ERC165_init() internal onlyInitializing {\n    }\n\n    function __ERC165_init_unchained() internal onlyInitializing {\n    }\n    /**\n     * @dev See {IERC165-supportsInterface}.\n     */\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\n        return interfaceId == type(IERC165Upgradeable).interfaceId;\n    }\n\n    /**\n     * @dev This empty reserved space is put in place to allow future versions to add new\n     * variables without shifting down storage in the inheritance chain.\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n     */\n    uint256[50] private __gap;\n}\n"},"@openzeppelin/contracts-upgradeable/utils/introspection/IERC165Upgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165Upgradeable {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},"@openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary MathUpgradeable {\n    enum Rounding {\n        Down, // Toward negative infinity\n        Up, // Toward infinity\n        Zero // Toward zero\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds up instead\n     * of rounding down.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)\n     * with further edits by Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod0 := mul(x, y)\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            require(denominator > prod1, \"Math: mulDiv overflow\");\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.\n            // See https://cs.stackexchange.com/q/138556/92363.\n\n            // Does not overflow because the denominator cannot be zero at this stage in the function.\n            uint256 twos = denominator & (~denominator + 1);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works\n            // in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/utils/math/SafeCastUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCastUpgradeable {\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     *\n     * _Available since v3.0._\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        require(value >= 0, \"SafeCast: value must be positive\");\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 248 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 240 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 232 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 224 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 216 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 208 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 200 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 192 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 184 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 176 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 168 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 160 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 152 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 144 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 136 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 128 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 120 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 112 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 104 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 96 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 88 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 80 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 72 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 64 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 56 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 48 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 40 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 32 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 24 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 16 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 8 bits\");\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     *\n     * _Available since v3.0._\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n        return int256(value);\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/utils/math/SignedMathUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMathUpgradeable {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/utils/StorageSlotUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(Address.isContract(newImplementation), \"ERC1967: new implementation is not a contract\");\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._\n * _Available since v4.9 for `string`, `bytes`._\n */\nlibrary StorageSlotUpgradeable {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n}\n"},"@openzeppelin/contracts-upgradeable/utils/StringsUpgradeable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./math/MathUpgradeable.sol\";\nimport \"./math/SignedMathUpgradeable.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary StringsUpgradeable {\n    bytes16 private constant _SYMBOLS = \"0123456789abcdef\";\n    uint8 private constant _ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = MathUpgradeable.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toString(int256 value) internal pure returns (string memory) {\n        return string(abi.encodePacked(value < 0 ? \"-\" : \"\", toString(SignedMathUpgradeable.abs(value))));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, MathUpgradeable.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = _SYMBOLS[value & 0xf];\n            value >>= 4;\n        }\n        require(value == 0, \"Strings: hex length insufficient\");\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n"},"@openzeppelin/contracts/access/IAccessControl.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev External interface of AccessControl declared to support ERC165 detection.\n */\ninterface IAccessControl {\n    /**\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\n     *\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\n     * {RoleAdminChanged} not being emitted signaling this.\n     *\n     * _Available since v3.1._\n     */\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\n\n    /**\n     * @dev Emitted when `account` is granted `role`.\n     *\n     * `sender` is the account that originated the contract call, an admin role\n     * bearer except when using {AccessControl-_setupRole}.\n     */\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Emitted when `account` is revoked `role`.\n     *\n     * `sender` is the account that originated the contract call:\n     *   - if using `revokeRole`, it is the admin role bearer\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\n     */\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\n\n    /**\n     * @dev Returns `true` if `account` has been granted `role`.\n     */\n    function hasRole(bytes32 role, address account) external view returns (bool);\n\n    /**\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\n     * {revokeRole}.\n     *\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\n     */\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\n\n    /**\n     * @dev Grants `role` to `account`.\n     *\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function grantRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from `account`.\n     *\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\n     *\n     * Requirements:\n     *\n     * - the caller must have ``role``'s admin role.\n     */\n    function revokeRole(bytes32 role, address account) external;\n\n    /**\n     * @dev Revokes `role` from the calling account.\n     *\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\n     * purpose is to provide a mechanism for accounts to lose their privileges\n     * if they are compromised (such as when a trusted device is misplaced).\n     *\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\n     * event.\n     *\n     * Requirements:\n     *\n     * - the caller must be `account`.\n     */\n    function renounceRole(bytes32 role, address account) external;\n}\n"},"@openzeppelin/contracts/interfaces/IERC1271.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC1271 standard signature validation method for\n * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].\n *\n * _Available since v4.1._\n */\ninterface IERC1271 {\n    /**\n     * @dev Should return whether the signature provided is valid for the provided data\n     * @param hash      Hash of the data to be signed\n     * @param signature Signature byte array associated with _data\n     */\n    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);\n}\n"},"@openzeppelin/contracts/utils/cryptography/ECDSA.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Strings.sol\";\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n    enum RecoverError {\n        NoError,\n        InvalidSignature,\n        InvalidSignatureLength,\n        InvalidSignatureS,\n        InvalidSignatureV // Deprecated in v4.8\n    }\n\n    function _throwError(RecoverError error) private pure {\n        if (error == RecoverError.NoError) {\n            return; // no error: do nothing\n        } else if (error == RecoverError.InvalidSignature) {\n            revert(\"ECDSA: invalid signature\");\n        } else if (error == RecoverError.InvalidSignatureLength) {\n            revert(\"ECDSA: invalid signature length\");\n        } else if (error == RecoverError.InvalidSignatureS) {\n            revert(\"ECDSA: invalid signature 's' value\");\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature` or error string. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {toEthSignedMessageHash} on it.\n     *\n     * Documentation for signature generation:\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\n        if (signature.length == 65) {\n            bytes32 r;\n            bytes32 s;\n            uint8 v;\n            // ecrecover takes the signature parameters, and the only way to get them\n            // currently is to use assembly.\n            /// @solidity memory-safe-assembly\n            assembly {\n                r := mload(add(signature, 0x20))\n                s := mload(add(signature, 0x40))\n                v := byte(0, mload(add(signature, 0x60)))\n            }\n            return tryRecover(hash, v, r, s);\n        } else {\n            return (address(0), RecoverError.InvalidSignatureLength);\n        }\n    }\n\n    /**\n     * @dev Returns the address that signed a hashed message (`hash`) with\n     * `signature`. This address can then be used for verification purposes.\n     *\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n     * this function rejects them by requiring the `s` value to be in the lower\n     * half order, and the `v` value to be either 27 or 28.\n     *\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n     * verification to be secure: it is possible to craft signatures that\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n     * this is by receiving a hash of the original message (which may otherwise\n     * be too long), and then calling {toEthSignedMessageHash} on it.\n     */\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, signature);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n     *\n     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {\n        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n        uint8 v = uint8((uint256(vs) >> 255) + 27);\n        return tryRecover(hash, v, r, s);\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n     *\n     * _Available since v4.2._\n     */\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, r, vs);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     *\n     * _Available since v4.3._\n     */\n    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n        //\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n        // these malleable signatures as well.\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n            return (address(0), RecoverError.InvalidSignatureS);\n        }\n\n        // If the signature is valid (and not malleable), return the signer address\n        address signer = ecrecover(hash, v, r, s);\n        if (signer == address(0)) {\n            return (address(0), RecoverError.InvalidSignature);\n        }\n\n        return (signer, RecoverError.NoError);\n    }\n\n    /**\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\n     * `r` and `s` signature fields separately.\n     */\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\n        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\n        _throwError(error);\n        return recovered;\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Message, created from a `hash`. This\n     * produces hash corresponding to the one signed with the\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n     * JSON-RPC method as part of EIP-191.\n     *\n     * See {recover}.\n     */\n    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {\n        // 32 is the length in bytes of hash,\n        // enforced by the type signature above\n        /// @solidity memory-safe-assembly\n        assembly {\n            mstore(0x00, \"\\x19Ethereum Signed Message:\\n32\")\n            mstore(0x1c, hash)\n            message := keccak256(0x00, 0x3c)\n        }\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Message, created from `s`. This\n     * produces hash corresponding to the one signed with the\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n     * JSON-RPC method as part of EIP-191.\n     *\n     * See {recover}.\n     */\n    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n\", Strings.toString(s.length), s));\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Typed Data, created from a\n     * `domainSeparator` and a `structHash`. This produces hash corresponding\n     * to the one signed with the\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\n     * JSON-RPC method as part of EIP-712.\n     *\n     * See {recover}.\n     */\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            let ptr := mload(0x40)\n            mstore(ptr, \"\\x19\\x01\")\n            mstore(add(ptr, 0x02), domainSeparator)\n            mstore(add(ptr, 0x22), structHash)\n            data := keccak256(ptr, 0x42)\n        }\n    }\n\n    /**\n     * @dev Returns an Ethereum Signed Data with intended validator, created from a\n     * `validator` and `data` according to the version 0 of EIP-191.\n     *\n     * See {recover}.\n     */\n    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {\n        return keccak256(abi.encodePacked(\"\\x19\\x00\", validator, data));\n    }\n}\n"},"@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/SignatureChecker.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./ECDSA.sol\";\nimport \"../../interfaces/IERC1271.sol\";\n\n/**\n * @dev Signature verification helper that can be used instead of `ECDSA.recover` to seamlessly support both ECDSA\n * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets like\n * Argent and Gnosis Safe.\n *\n * _Available since v4.1._\n */\nlibrary SignatureChecker {\n    /**\n     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the\n     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECDSA.recover`.\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     */\n    function isValidSignatureNow(address signer, bytes32 hash, bytes memory signature) internal view returns (bool) {\n        (address recovered, ECDSA.RecoverError error) = ECDSA.tryRecover(hash, signature);\n        return\n            (error == ECDSA.RecoverError.NoError && recovered == signer) ||\n            isValidERC1271SignatureNow(signer, hash, signature);\n    }\n\n    /**\n     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated\n     * against the signer smart contract using ERC1271.\n     *\n     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus\n     * change through time. It could return true at block N and false at block N+1 (or the opposite).\n     */\n    function isValidERC1271SignatureNow(\n        address signer,\n        bytes32 hash,\n        bytes memory signature\n    ) internal view returns (bool) {\n        (bool success, bytes memory result) = signer.staticcall(\n            abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature)\n        );\n        return (success &&\n            result.length >= 32 &&\n            abi.decode(result, (bytes32)) == bytes32(IERC1271.isValidSignature.selector));\n    }\n}\n"},"@openzeppelin/contracts/utils/math/Math.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Down, // Toward negative infinity\n        Up, // Toward infinity\n        Zero // Toward zero\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds up instead\n     * of rounding down.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b - 1) / b can overflow on addition, so we distribute.\n        return a == 0 ? 0 : (a - 1) / b + 1;\n    }\n\n    /**\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)\n     * with further edits by Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2^256 + prod0.\n            uint256 prod0; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod0 := mul(x, y)\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\n            require(denominator > prod1, \"Math: mulDiv overflow\");\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.\n            // See https://cs.stackexchange.com/q/138556/92363.\n\n            // Does not overflow because the denominator cannot be zero at this stage in the function.\n            uint256 twos = denominator & (~denominator + 1);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv = 1 mod 2^4.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works\n            // in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        uint256 result = mulDiv(x, y, denominator);\n        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {\n            result += 1;\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.\n     *\n     * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        if (a == 0) {\n            return 0;\n        }\n\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n        //\n        // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n        //\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n        //\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n        uint256 result = 1 << (log2(a) >> 1);\n\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n        // into the expected uint128 result.\n        unchecked {\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            result = (result + a / result) >> 1;\n            return min(result, a / result);\n        }\n    }\n\n    /**\n     * @notice Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 128;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 64;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 32;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 16;\n            }\n            if (value >> 8 > 0) {\n                value >>= 8;\n                result += 8;\n            }\n            if (value >> 4 > 0) {\n                value >>= 4;\n                result += 4;\n            }\n            if (value >> 2 > 0) {\n                value >>= 2;\n                result += 2;\n            }\n            if (value >> 1 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256, rounded down, of a positive value.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >> 128 > 0) {\n                value >>= 128;\n                result += 16;\n            }\n            if (value >> 64 > 0) {\n                value >>= 64;\n                result += 8;\n            }\n            if (value >> 32 > 0) {\n                value >>= 32;\n                result += 4;\n            }\n            if (value >> 16 > 0) {\n                value >>= 16;\n                result += 2;\n            }\n            if (value >> 8 > 0) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/math/SafeCast.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCast {\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.2._\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v2.5._\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     *\n     * _Available since v3.0._\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        require(value >= 0, \"SafeCast: value must be positive\");\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 248 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 240 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 232 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 224 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 216 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 208 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 200 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 192 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 184 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 176 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 168 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 160 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 152 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 144 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 136 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 128 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 120 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 112 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 104 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 96 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 88 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 80 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 72 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 64 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 56 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 48 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 40 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 32 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     *\n     * _Available since v4.7._\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 24 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 16 bits\");\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     *\n     * _Available since v3.1._\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        require(downcasted == value, \"SafeCast: value doesn't fit in 8 bits\");\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     *\n     * _Available since v3.0._\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n        return int256(value);\n    }\n}\n"},"@openzeppelin/contracts/utils/math/SafeMath.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)\n\npragma solidity ^0.8.0;\n\n// CAUTION\n// This version of SafeMath should only be used with Solidity 0.8 or later,\n// because it relies on the compiler's built in overflow checks.\n\n/**\n * @dev Wrappers over Solidity's arithmetic operations.\n *\n * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler\n * now has built in overflow checking.\n */\nlibrary SafeMath {\n    /**\n     * @dev Returns the addition of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.\n     *\n     * _Available since v3.4._\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `+` operator.\n     *\n     * Requirements:\n     *\n     * - Addition cannot overflow.\n     */\n    function add(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a + b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting on\n     * overflow (when the result is negative).\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a - b;\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, reverting on\n     * overflow.\n     *\n     * Counterpart to Solidity's `*` operator.\n     *\n     * Requirements:\n     *\n     * - Multiplication cannot overflow.\n     */\n    function mul(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a * b;\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator.\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a / b;\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting when dividing by zero.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b) internal pure returns (uint256) {\n        return a % b;\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on\n     * overflow (when the result is negative).\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {trySub}.\n     *\n     * Counterpart to Solidity's `-` operator.\n     *\n     * Requirements:\n     *\n     * - Subtraction cannot overflow.\n     */\n    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        unchecked {\n            require(b <= a, errorMessage);\n            return a - b;\n        }\n    }\n\n    /**\n     * @dev Returns the integer division of two unsigned integers, reverting with custom message on\n     * division by zero. The result is rounded towards zero.\n     *\n     * Counterpart to Solidity's `/` operator. Note: this function uses a\n     * `revert` opcode (which leaves remaining gas untouched) while Solidity\n     * uses an invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        unchecked {\n            require(b > 0, errorMessage);\n            return a / b;\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),\n     * reverting with custom message when dividing by zero.\n     *\n     * CAUTION: This function is deprecated because it requires allocating memory for the error\n     * message unnecessarily. For custom revert reasons use {tryMod}.\n     *\n     * Counterpart to Solidity's `%` operator. This function uses a `revert`\n     * opcode (which leaves remaining gas untouched) while Solidity uses an\n     * invalid opcode to revert (consuming all remaining gas).\n     *\n     * Requirements:\n     *\n     * - The divisor cannot be zero.\n     */\n    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {\n        unchecked {\n            require(b > 0, errorMessage);\n            return a % b;\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/math/SignedMath.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard signed math utilities missing in the Solidity language.\n */\nlibrary SignedMath {\n    /**\n     * @dev Returns the largest of two signed numbers.\n     */\n    function max(int256 a, int256 b) internal pure returns (int256) {\n        return a > b ? a : b;\n    }\n\n    /**\n     * @dev Returns the smallest of two signed numbers.\n     */\n    function min(int256 a, int256 b) internal pure returns (int256) {\n        return a < b ? a : b;\n    }\n\n    /**\n     * @dev Returns the average of two signed numbers without overflow.\n     * The result is rounded towards zero.\n     */\n    function average(int256 a, int256 b) internal pure returns (int256) {\n        // Formula from the book \"Hacker's Delight\"\n        int256 x = (a & b) + ((a ^ b) >> 1);\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\n    }\n\n    /**\n     * @dev Returns the absolute unsigned value of a signed value.\n     */\n    function abs(int256 n) internal pure returns (uint256) {\n        unchecked {\n            // must be unchecked in order to support `n = type(int256).min`\n            return uint256(n >= 0 ? n : -n);\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Strings.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./math/Math.sol\";\nimport \"./math/SignedMath.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n    bytes16 private constant _SYMBOLS = \"0123456789abcdef\";\n    uint8 private constant _ADDRESS_LENGTH = 20;\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n     */\n    function toString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            uint256 length = Math.log10(value) + 1;\n            string memory buffer = new string(length);\n            uint256 ptr;\n            /// @solidity memory-safe-assembly\n            assembly {\n                ptr := add(buffer, add(32, length))\n            }\n            while (true) {\n                ptr--;\n                /// @solidity memory-safe-assembly\n                assembly {\n                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))\n                }\n                value /= 10;\n                if (value == 0) break;\n            }\n            return buffer;\n        }\n    }\n\n    /**\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\n     */\n    function toString(int256 value) internal pure returns (string memory) {\n        return string(abi.encodePacked(value < 0 ? \"-\" : \"\", toString(SignedMath.abs(value))));\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n     */\n    function toHexString(uint256 value) internal pure returns (string memory) {\n        unchecked {\n            return toHexString(value, Math.log256(value) + 1);\n        }\n    }\n\n    /**\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n     */\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n        bytes memory buffer = new bytes(2 * length + 2);\n        buffer[0] = \"0\";\n        buffer[1] = \"x\";\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\n            buffer[i] = _SYMBOLS[value & 0xf];\n            value >>= 4;\n        }\n        require(value == 0, \"Strings: hex length insufficient\");\n        return string(buffer);\n    }\n\n    /**\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n     */\n    function toHexString(address addr) internal pure returns (string memory) {\n        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n    }\n\n    /**\n     * @dev Returns true if the two strings are equal.\n     */\n    function equal(string memory a, string memory b) internal pure returns (bool) {\n        return keccak256(bytes(a)) == keccak256(bytes(b));\n    }\n}\n"},"@openzeppelin/contracts/utils/structs/DoubleEndedQueue.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/DoubleEndedQueue.sol)\npragma solidity ^0.8.4;\n\nimport \"../math/SafeCast.sol\";\n\n/**\n * @dev A sequence of items with the ability to efficiently push and pop items (i.e. insert and remove) on both ends of\n * the sequence (called front and back). Among other access patterns, it can be used to implement efficient LIFO and\n * FIFO queues. Storage use is optimized, and all operations are O(1) constant time. This includes {clear}, given that\n * the existing queue contents are left in storage.\n *\n * The struct is called `Bytes32Deque`. Other types can be cast to and from `bytes32`. This data structure can only be\n * used in storage, and not in memory.\n * ```solidity\n * DoubleEndedQueue.Bytes32Deque queue;\n * ```\n *\n * _Available since v4.6._\n */\nlibrary DoubleEndedQueue {\n    /**\n     * @dev An operation (e.g. {front}) couldn't be completed due to the queue being empty.\n     */\n    error Empty();\n\n    /**\n     * @dev An operation (e.g. {at}) couldn't be completed due to an index being out of bounds.\n     */\n    error OutOfBounds();\n\n    /**\n     * @dev Indices are signed integers because the queue can grow in any direction. They are 128 bits so begin and end\n     * are packed in a single storage slot for efficient access. Since the items are added one at a time we can safely\n     * assume that these 128-bit indices will not overflow, and use unchecked arithmetic.\n     *\n     * Struct members have an underscore prefix indicating that they are \"private\" and should not be read or written to\n     * directly. Use the functions provided below instead. Modifying the struct manually may violate assumptions and\n     * lead to unexpected behavior.\n     *\n     * Indices are in the range [begin, end) which means the first item is at data[begin] and the last item is at\n     * data[end - 1].\n     */\n    struct Bytes32Deque {\n        int128 _begin;\n        int128 _end;\n        mapping(int128 => bytes32) _data;\n    }\n\n    /**\n     * @dev Inserts an item at the end of the queue.\n     */\n    function pushBack(Bytes32Deque storage deque, bytes32 value) internal {\n        int128 backIndex = deque._end;\n        deque._data[backIndex] = value;\n        unchecked {\n            deque._end = backIndex + 1;\n        }\n    }\n\n    /**\n     * @dev Removes the item at the end of the queue and returns it.\n     *\n     * Reverts with `Empty` if the queue is empty.\n     */\n    function popBack(Bytes32Deque storage deque) internal returns (bytes32 value) {\n        if (empty(deque)) revert Empty();\n        int128 backIndex;\n        unchecked {\n            backIndex = deque._end - 1;\n        }\n        value = deque._data[backIndex];\n        delete deque._data[backIndex];\n        deque._end = backIndex;\n    }\n\n    /**\n     * @dev Inserts an item at the beginning of the queue.\n     */\n    function pushFront(Bytes32Deque storage deque, bytes32 value) internal {\n        int128 frontIndex;\n        unchecked {\n            frontIndex = deque._begin - 1;\n        }\n        deque._data[frontIndex] = value;\n        deque._begin = frontIndex;\n    }\n\n    /**\n     * @dev Removes the item at the beginning of the queue and returns it.\n     *\n     * Reverts with `Empty` if the queue is empty.\n     */\n    function popFront(Bytes32Deque storage deque) internal returns (bytes32 value) {\n        if (empty(deque)) revert Empty();\n        int128 frontIndex = deque._begin;\n        value = deque._data[frontIndex];\n        delete deque._data[frontIndex];\n        unchecked {\n            deque._begin = frontIndex + 1;\n        }\n    }\n\n    /**\n     * @dev Returns the item at the beginning of the queue.\n     *\n     * Reverts with `Empty` if the queue is empty.\n     */\n    function front(Bytes32Deque storage deque) internal view returns (bytes32 value) {\n        if (empty(deque)) revert Empty();\n        int128 frontIndex = deque._begin;\n        return deque._data[frontIndex];\n    }\n\n    /**\n     * @dev Returns the item at the end of the queue.\n     *\n     * Reverts with `Empty` if the queue is empty.\n     */\n    function back(Bytes32Deque storage deque) internal view returns (bytes32 value) {\n        if (empty(deque)) revert Empty();\n        int128 backIndex;\n        unchecked {\n            backIndex = deque._end - 1;\n        }\n        return deque._data[backIndex];\n    }\n\n    /**\n     * @dev Return the item at a position in the queue given by `index`, with the first item at 0 and last item at\n     * `length(deque) - 1`.\n     *\n     * Reverts with `OutOfBounds` if the index is out of bounds.\n     */\n    function at(Bytes32Deque storage deque, uint256 index) internal view returns (bytes32 value) {\n        // int256(deque._begin) is a safe upcast\n        int128 idx = SafeCast.toInt128(int256(deque._begin) + SafeCast.toInt256(index));\n        if (idx >= deque._end) revert OutOfBounds();\n        return deque._data[idx];\n    }\n\n    /**\n     * @dev Resets the queue back to being empty.\n     *\n     * NOTE: The current items are left behind in storage. This does not affect the functioning of the queue, but misses\n     * out on potential gas refunds.\n     */\n    function clear(Bytes32Deque storage deque) internal {\n        deque._begin = 0;\n        deque._end = 0;\n    }\n\n    /**\n     * @dev Returns the number of items in the queue.\n     */\n    function length(Bytes32Deque storage deque) internal view returns (uint256) {\n        // The interface preserves the invariant that begin <= end so we assume this will not overflow.\n        // We also assume there are at most int256.max items in the queue.\n        unchecked {\n            return uint256(int256(deque._end) - int256(deque._begin));\n        }\n    }\n\n    /**\n     * @dev Returns true if the queue is empty.\n     */\n    function empty(Bytes32Deque storage deque) internal view returns (bool) {\n        return deque._end <= deque._begin;\n    }\n}\n"},"@openzeppelin/contracts/utils/structs/EnumerableSet.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)\n// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Library for managing\n * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive\n * types.\n *\n * Sets have the following properties:\n *\n * - Elements are added, removed, and checked for existence in constant time\n * (O(1)).\n * - Elements are enumerated in O(n). No guarantees are made on the ordering.\n *\n * ```solidity\n * contract Example {\n *     // Add the library methods\n *     using EnumerableSet for EnumerableSet.AddressSet;\n *\n *     // Declare a set state variable\n *     EnumerableSet.AddressSet private mySet;\n * }\n * ```\n *\n * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)\n * and `uint256` (`UintSet`) are supported.\n *\n * [WARNING]\n * ====\n * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure\n * unusable.\n * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.\n *\n * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an\n * array of EnumerableSet.\n * ====\n */\nlibrary EnumerableSet {\n    // To implement this library for multiple types with as little code\n    // repetition as possible, we write it in terms of a generic Set type with\n    // bytes32 values.\n    // The Set implementation uses private functions, and user-facing\n    // implementations (such as AddressSet) are just wrappers around the\n    // underlying Set.\n    // This means that we can only create new EnumerableSets for types that fit\n    // in bytes32.\n\n    struct Set {\n        // Storage of set values\n        bytes32[] _values;\n        // Position of the value in the `values` array, plus 1 because index 0\n        // means a value is not in the set.\n        mapping(bytes32 => uint256) _indexes;\n    }\n\n    /**\n     * @dev Add a value to a set. O(1).\n     *\n     * Returns true if the value was added to the set, that is if it was not\n     * already present.\n     */\n    function _add(Set storage set, bytes32 value) private returns (bool) {\n        if (!_contains(set, value)) {\n            set._values.push(value);\n            // The value is stored at length-1, but we add 1 to all indexes\n            // and use 0 as a sentinel value\n            set._indexes[value] = set._values.length;\n            return true;\n        } else {\n            return false;\n        }\n    }\n\n    /**\n     * @dev Removes a value from a set. O(1).\n     *\n     * Returns true if the value was removed from the set, that is if it was\n     * present.\n     */\n    function _remove(Set storage set, bytes32 value) private returns (bool) {\n        // We read and store the value's index to prevent multiple reads from the same storage slot\n        uint256 valueIndex = set._indexes[value];\n\n        if (valueIndex != 0) {\n            // Equivalent to contains(set, value)\n            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in\n            // the array, and then remove the last element (sometimes called as 'swap and pop').\n            // This modifies the order of the array, as noted in {at}.\n\n            uint256 toDeleteIndex = valueIndex - 1;\n            uint256 lastIndex = set._values.length - 1;\n\n            if (lastIndex != toDeleteIndex) {\n                bytes32 lastValue = set._values[lastIndex];\n\n                // Move the last value to the index where the value to delete is\n                set._values[toDeleteIndex] = lastValue;\n                // Update the index for the moved value\n                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex\n            }\n\n            // Delete the slot where the moved value was stored\n            set._values.pop();\n\n            // Delete the index for the deleted slot\n            delete set._indexes[value];\n\n            return true;\n        } else {\n            return false;\n        }\n    }\n\n    /**\n     * @dev Returns true if the value is in the set. O(1).\n     */\n    function _contains(Set storage set, bytes32 value) private view returns (bool) {\n        return set._indexes[value] != 0;\n    }\n\n    /**\n     * @dev Returns the number of values on the set. O(1).\n     */\n    function _length(Set storage set) private view returns (uint256) {\n        return set._values.length;\n    }\n\n    /**\n     * @dev Returns the value stored at position `index` in the set. O(1).\n     *\n     * Note that there are no guarantees on the ordering of values inside the\n     * array, and it may change when more values are added or removed.\n     *\n     * Requirements:\n     *\n     * - `index` must be strictly less than {length}.\n     */\n    function _at(Set storage set, uint256 index) private view returns (bytes32) {\n        return set._values[index];\n    }\n\n    /**\n     * @dev Return the entire set in an array\n     *\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n     */\n    function _values(Set storage set) private view returns (bytes32[] memory) {\n        return set._values;\n    }\n\n    // Bytes32Set\n\n    struct Bytes32Set {\n        Set _inner;\n    }\n\n    /**\n     * @dev Add a value to a set. O(1).\n     *\n     * Returns true if the value was added to the set, that is if it was not\n     * already present.\n     */\n    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {\n        return _add(set._inner, value);\n    }\n\n    /**\n     * @dev Removes a value from a set. O(1).\n     *\n     * Returns true if the value was removed from the set, that is if it was\n     * present.\n     */\n    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {\n        return _remove(set._inner, value);\n    }\n\n    /**\n     * @dev Returns true if the value is in the set. O(1).\n     */\n    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {\n        return _contains(set._inner, value);\n    }\n\n    /**\n     * @dev Returns the number of values in the set. O(1).\n     */\n    function length(Bytes32Set storage set) internal view returns (uint256) {\n        return _length(set._inner);\n    }\n\n    /**\n     * @dev Returns the value stored at position `index` in the set. O(1).\n     *\n     * Note that there are no guarantees on the ordering of values inside the\n     * array, and it may change when more values are added or removed.\n     *\n     * Requirements:\n     *\n     * - `index` must be strictly less than {length}.\n     */\n    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {\n        return _at(set._inner, index);\n    }\n\n    /**\n     * @dev Return the entire set in an array\n     *\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n     */\n    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {\n        bytes32[] memory store = _values(set._inner);\n        bytes32[] memory result;\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            result := store\n        }\n\n        return result;\n    }\n\n    // AddressSet\n\n    struct AddressSet {\n        Set _inner;\n    }\n\n    /**\n     * @dev Add a value to a set. O(1).\n     *\n     * Returns true if the value was added to the set, that is if it was not\n     * already present.\n     */\n    function add(AddressSet storage set, address value) internal returns (bool) {\n        return _add(set._inner, bytes32(uint256(uint160(value))));\n    }\n\n    /**\n     * @dev Removes a value from a set. O(1).\n     *\n     * Returns true if the value was removed from the set, that is if it was\n     * present.\n     */\n    function remove(AddressSet storage set, address value) internal returns (bool) {\n        return _remove(set._inner, bytes32(uint256(uint160(value))));\n    }\n\n    /**\n     * @dev Returns true if the value is in the set. O(1).\n     */\n    function contains(AddressSet storage set, address value) internal view returns (bool) {\n        return _contains(set._inner, bytes32(uint256(uint160(value))));\n    }\n\n    /**\n     * @dev Returns the number of values in the set. O(1).\n     */\n    function length(AddressSet storage set) internal view returns (uint256) {\n        return _length(set._inner);\n    }\n\n    /**\n     * @dev Returns the value stored at position `index` in the set. O(1).\n     *\n     * Note that there are no guarantees on the ordering of values inside the\n     * array, and it may change when more values are added or removed.\n     *\n     * Requirements:\n     *\n     * - `index` must be strictly less than {length}.\n     */\n    function at(AddressSet storage set, uint256 index) internal view returns (address) {\n        return address(uint160(uint256(_at(set._inner, index))));\n    }\n\n    /**\n     * @dev Return the entire set in an array\n     *\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n     */\n    function values(AddressSet storage set) internal view returns (address[] memory) {\n        bytes32[] memory store = _values(set._inner);\n        address[] memory result;\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            result := store\n        }\n\n        return result;\n    }\n\n    // UintSet\n\n    struct UintSet {\n        Set _inner;\n    }\n\n    /**\n     * @dev Add a value to a set. O(1).\n     *\n     * Returns true if the value was added to the set, that is if it was not\n     * already present.\n     */\n    function add(UintSet storage set, uint256 value) internal returns (bool) {\n        return _add(set._inner, bytes32(value));\n    }\n\n    /**\n     * @dev Removes a value from a set. O(1).\n     *\n     * Returns true if the value was removed from the set, that is if it was\n     * present.\n     */\n    function remove(UintSet storage set, uint256 value) internal returns (bool) {\n        return _remove(set._inner, bytes32(value));\n    }\n\n    /**\n     * @dev Returns true if the value is in the set. O(1).\n     */\n    function contains(UintSet storage set, uint256 value) internal view returns (bool) {\n        return _contains(set._inner, bytes32(value));\n    }\n\n    /**\n     * @dev Returns the number of values in the set. O(1).\n     */\n    function length(UintSet storage set) internal view returns (uint256) {\n        return _length(set._inner);\n    }\n\n    /**\n     * @dev Returns the value stored at position `index` in the set. O(1).\n     *\n     * Note that there are no guarantees on the ordering of values inside the\n     * array, and it may change when more values are added or removed.\n     *\n     * Requirements:\n     *\n     * - `index` must be strictly less than {length}.\n     */\n    function at(UintSet storage set, uint256 index) internal view returns (uint256) {\n        return uint256(_at(set._inner, index));\n    }\n\n    /**\n     * @dev Return the entire set in an array\n     *\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\n     */\n    function values(UintSet storage set) internal view returns (uint256[] memory) {\n        bytes32[] memory store = _values(set._inner);\n        uint256[] memory result;\n\n        /// @solidity memory-safe-assembly\n        assembly {\n            result := store\n        }\n\n        return result;\n    }\n}\n"},"contracts/BaseStorage.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { SupplyControl } from \"./SupplyControl.sol\";\n\n/**\n * @title BaseStorage\n * @notice The BaseStorage contract is a storage abstraction contract for the PaxosToken.\n * @custom:security-contact smart-contract-security@paxos.com\n */\ncontract BaseStorage {\n    // Check if contract is initialized until version 1.\n    bool internal initializedV1;\n\n    // ERC20 Basic data to capture balances and total supply.\n    mapping(address => uint256) internal balances;\n    uint256 internal totalSupply_;\n\n    // Storage to keep track of allowances.\n    mapping(address => mapping(address => uint256)) internal allowed;\n\n    // Owner of contract: Deprecated.\n    address public ownerDeprecated;\n\n    // Represents if the contact is paused or not.\n    bool public paused;\n\n    // Asset protection data: Deprecated.\n    address public assetProtectionRoleDeprecated;\n\n    // Mapping to keep track of frozen addresses.\n    mapping(address => bool) internal frozen;\n\n    // Supply controller of the contract.\n    address public supplyControllerDeprecated;\n\n    // Proposed owner of the contract: Deprecated.\n    address public proposedOwnerDeprecated;\n\n    // Delegated transfer data: Deprecated.\n    address public betaDelegateWhitelisterDeprecated;\n    mapping(address => bool) internal betaDelegateWhitelistDeprecated;\n    mapping(address => uint256) internal nextSeqsDeprecated;\n    // Hash of the EIP712 Domain Separator data: Deprecated.\n    // solhint-disable-next-line var-name-mixedcase\n    bytes32 public EIP712_DOMAIN_HASH_DEPRECATED;\n\n    // Address of the supply control contract\n    SupplyControl public supplyControl;\n\n    // Storage gap: https://docs.openzeppelin.com/upgrades-plugins/1.x/writing-upgradeable#storage-gaps\n    uint256[24] __gap_BaseStorage;\n}\n"},"contracts/lib/EIP2612.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { PaxosBaseAbstract } from \"./PaxosBaseAbstract.sol\";\nimport { EIP712Domain } from \"./EIP712Domain.sol\";\nimport { EIP2612Definitions } from \"./EIP2612Definitions.sol\";\nimport { SignatureChecker } from \"@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol\";\n\n/**\n * @title EIP2612 contract\n * @dev An abstract contract to provide EIP2612 functionality.\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract EIP2612 is PaxosBaseAbstract, EIP712Domain, EIP2612Definitions {\n    mapping(address => uint256) internal _nonces;\n    // Storage gap: https://docs.openzeppelin.com/upgrades-plugins/1.x/writing-upgradeable#storage-gaps\n    uint256[10] __gap_EIP2612;\n\n    /**\n     * @notice Nonces for permit\n     * @param owner Token owner's address\n     * @return Next nonce\n     */\n    function nonces(address owner) external view returns (uint256) {\n        return _nonces[owner];\n    }\n\n    /**\n     * @notice Update allowance with a signed permit\n     * @param owner     Token owner's address (Authorizer)\n     * @param spender   Spender's address\n     * @param value     Amount of allowance\n     * @param deadline  The time at which this expires (unix time)\n     * @param v         v of the signature\n     * @param r         r of the signature\n     * @param s         s of the signature\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external whenNotPaused isNonZeroAddress(owner) isNonZeroAddress(spender) {\n        bytes memory signature = abi.encodePacked(r, s, v);\n        _permit(owner, spender, value, deadline, signature);\n    }\n\n    /**\n     * @notice Update allowance with a signed permit\n     * @param owner     Token owner's address (Authorizer)\n     * @param spender   Spender's address\n     * @param value     Amount of allowance\n     * @param deadline  The time at which this expires (unix time)\n     * @param signature Unstructured bytes signature signed by an EOA wallet or a contract wallet\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        bytes memory signature\n    ) external whenNotPaused isNonZeroAddress(owner) isNonZeroAddress(spender) {\n        _permit(owner, spender, value, deadline, signature);\n    }\n\n    /**\n     * @dev Internal function to execute a permit with a signed authorization using bytes signature\n     * @param owner     Token owner's address (Authorizer)\n     * @param spender   Spender's address\n     * @param value     Amount of allowance\n     * @param deadline  The time at which this expires (unix time)\n     * @param signature Signature byte array produced by an EOA wallet or a contract wallet\n     */\n    function _permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        bytes memory signature\n    ) internal {\n        if (deadline < block.timestamp) revert PermitExpired();\n        if (_isAddrFrozen(spender) || _isAddrFrozen(owner)) revert AddressFrozen();\n\n        bytes32 digest = keccak256(abi.encodePacked(\n            EIP712_VERSION_PREFIX,\n            DOMAIN_SEPARATOR(),\n            keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _nonces[owner]++, deadline))\n        ));\n\n        if (!SignatureChecker.isValidSignatureNow(owner, digest, signature)) revert InvalidSignature();\n\n        _approve(owner, spender, value);\n    }\n\n    /**\n     * @notice Cancel one or more pending permits\n     * @dev This function increments the caller's nonce by the specified count,\n     * effectively invalidating all permits signed with nonces from the current\n     * nonce up to (current + count - 1).\n     *\n     * Provides a mechanism to cancel pending EIP-2612 permits before expiry.\n     *\n     * @param count Number of permits to cancel (must be > 0 and <= MAX_NONCE_INCREMENT)\n     *\n     * Example:\n     * - Current nonce: 5\n     * - Call cancelPermits(3)\n     * - New nonce: 8\n     * - Canceled permits: those signed with nonces 5, 6, and 7\n     */\n    function cancelPermits(uint256 count) external {\n        if (count == 0 || count > MAX_NONCE_INCREMENT) revert InvalidNonceCount();\n\n        _nonces[msg.sender] += count;\n        emit PermitInvalidated(msg.sender, _nonces[msg.sender]);\n    }\n}"},"contracts/lib/EIP2612Definitions.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\n/**\n * @title EIP2612Definitions\n * @dev Shared constants and errors for EIP-2612 (Permit) functionality\n * @notice This contract only defines constants and errors - no storage or functions\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract EIP2612Definitions {\n    // keccak256(\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\")\n    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;\n    \n    // Maximum number of permits that can be canceled in a single transaction\n    uint256 public constant MAX_NONCE_INCREMENT = 100;\n\n    /**\n     * @dev Emitted when an owner invalidates their nonces to cancel pending permits\n     * @param owner The address whose nonces were invalidated\n     * @param newNonce The new nonce value after invalidation\n     */\n    event PermitInvalidated(address indexed owner, uint256 newNonce);\n\n    error PermitExpired();\n    error InvalidNonceCount();\n}"},"contracts/lib/EIP3009.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { PaxosBaseAbstract } from \"./PaxosBaseAbstract.sol\";\nimport { EIP712Domain } from \"./EIP712Domain.sol\";\nimport { EIP3009Definitions } from \"./EIP3009Definitions.sol\";\nimport { SignatureChecker } from \"@openzeppelin/contracts/utils/cryptography/SignatureChecker.sol\";\n\n/**\n * @title EIP3009 contract\n * @dev An abstract contract to provide EIP3009 functionality.\n * @notice These functions do not prevent replay attacks when an initial\n * transaction fails. If conditions change, such as the contract going\n * from paused to unpaused, an external observer can reuse the data from the\n * failed transaction to execute it later.\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract EIP3009 is PaxosBaseAbstract, EIP712Domain, EIP3009Definitions {\n    /**\n     * @dev authorizer address => nonce => state (true = used / false = unused)\n     */\n    mapping(address => mapping(bytes32 => bool)) internal _authorizationStates;\n\n    // Storage gap: https://docs.openzeppelin.com/upgrades-plugins/1.x/writing-upgradeable#storage-gaps\n    uint256[10] __gap_EIP3009;\n\n    /**\n     * @notice Returns the state of an authorization\n     * @dev Nonces are randomly generated 32-byte data unique to the authorizer's\n     * address\n     * @param authorizer    Authorizer's address\n     * @param nonce         Nonce of the authorization\n     * @return True if the nonce is used\n     */\n    function authorizationState(address authorizer, bytes32 nonce) external view returns (bool) {\n        return _authorizationStates[authorizer][nonce];\n    }\n\n    /**\n     * @notice Execute a transfer with a signed authorization\n     * @param from          Payer's address (Authorizer)\n     * @param to            Payee's address\n     * @param value         Amount to be transferred\n     * @param validAfter    The time after which this is valid (unix time)\n     * @param validBefore   The time before which this is valid (unix time)\n     * @param nonce         Unique nonce\n     * @param v             v of the signature\n     * @param r             r of the signature\n     * @param s             s of the signature\n     */\n    function transferWithAuthorization(\n        address from,\n        address to,\n        uint256 value,\n        uint256 validAfter,\n        uint256 validBefore,\n        bytes32 nonce,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external whenNotPaused {\n        bytes memory signature = abi.encodePacked(r, s, v);\n        _transferWithAuthorization(\n            TRANSFER_WITH_AUTHORIZATION_TYPEHASH,\n            from,\n            to,\n            value,\n            validAfter,\n            validBefore,\n            nonce,\n            signature\n        );\n    }\n\n    /**\n     * @notice Execute a transfer with a signed authorization\n     * @param from          Payer's address (Authorizer)\n     * @param to            Payee's address\n     * @param value         Amount to be transferred\n     * @param validAfter    The time after which this is valid (unix time)\n     * @param validBefore   The time before which this is valid (unix time)\n     * @param nonce         Unique nonce\n     * @param signature     Unstructured bytes signature signed by an EOA wallet or a contract wallet\n     */\n    function transferWithAuthorization(\n        address from,\n        address to,\n        uint256 value,\n        uint256 validAfter,\n        uint256 validBefore,\n        bytes32 nonce,\n        bytes memory signature\n    ) external whenNotPaused {\n        _transferWithAuthorization(\n            TRANSFER_WITH_AUTHORIZATION_TYPEHASH,\n            from,\n            to,\n            value,\n            validAfter,\n            validBefore,\n            nonce,\n            signature\n        );\n    }\n\n    /**\n     * @notice Execute multiple transfers with signed authorizations\n     * @param from          Array of Payer's addresses (Authorizers)\n     * @param to            Array of Payee's addresses\n     * @param value         Array of amounts to be transferred\n     * @param validAfter    Array of times after which this is valid (unix time)\n     * @param validBefore   Array of times before which this is valid (unix time)\n     * @param nonce         Array of unique nonces\n     * @param v             Array of v values of the signatures\n     * @param r             Array of r values of the signatures\n     * @param s             Array of s values of the signatures\n     */\n    function transferWithAuthorizationBatch(\n        address[] memory from,\n        address[] memory to,\n        uint256[] memory value,\n        uint256[] memory validAfter,\n        uint256[] memory validBefore,\n        bytes32[] memory nonce,\n        uint8[] memory v,\n        bytes32[] memory r,\n        bytes32[] memory s\n    ) external whenNotPaused {\n        // Validate length of each parameter with \"from\" argument to make sure lengths of all input arguments are the same.\n        if (\n            !(to.length == from.length &&\n                value.length == from.length &&\n                validAfter.length == from.length &&\n                validBefore.length == from.length &&\n                nonce.length == from.length &&\n                v.length == from.length &&\n                r.length == from.length &&\n                s.length == from.length)\n        ) {\n            revert ArgumentLengthMismatch();\n        }\n\n        for (uint16 i = 0; i < from.length; i++) {\n            bytes memory signature = abi.encodePacked(r[i], s[i], v[i]);\n            _transferWithAuthorization(\n                TRANSFER_WITH_AUTHORIZATION_TYPEHASH,\n                from[i],\n                to[i],\n                value[i],\n                validAfter[i],\n                validBefore[i],\n                nonce[i],\n                signature\n            );\n        }\n    }\n\n    /**\n     * @notice Execute multiple transfers with signed authorizations (bytes signature version)\n     * @param from          Array of Payer's addresses (Authorizers)\n     * @param to            Array of Payee's addresses\n     * @param value         Array of amounts to be transferred\n     * @param validAfter    Array of times after which this is valid (unix time)\n     * @param validBefore   Array of times before which this is valid (unix time)\n     * @param nonce         Array of unique nonces\n     * @param signature     Array of packed signatures (bytes format)\n     */\n    function transferWithAuthorizationBatch(\n        address[] memory from,\n        address[] memory to,\n        uint256[] memory value,\n        uint256[] memory validAfter,\n        uint256[] memory validBefore,\n        bytes32[] memory nonce,\n        bytes[] memory signature\n    ) external whenNotPaused {\n        // Validate length of each parameter with \"from\" argument to make sure lengths of all input arguments are the same.\n        if (\n            !(to.length == from.length &&\n                value.length == from.length &&\n                validAfter.length == from.length &&\n                validBefore.length == from.length &&\n                nonce.length == from.length &&\n                signature.length == from.length)\n        ) {\n            revert ArgumentLengthMismatch();\n        }\n\n        for (uint16 i = 0; i < from.length; i++) {\n            _transferWithAuthorization(\n                TRANSFER_WITH_AUTHORIZATION_TYPEHASH,\n                from[i],\n                to[i],\n                value[i],\n                validAfter[i],\n                validBefore[i],\n                nonce[i],\n                signature[i]\n            );\n        }\n    }\n\n    /**\n     * @notice Receive a transfer with a signed authorization from the payer\n     * @dev This has an additional check to ensure that the payee's address matches\n     * the caller of this function to prevent front-running attacks. (See security\n     * considerations)\n     * @param from          Payer's address (Authorizer)\n     * @param to            Payee's address\n     * @param value         Amount to be transferred\n     * @param validAfter    The time after which this is valid (unix time)\n     * @param validBefore   The time before which this is valid (unix time)\n     * @param nonce         Unique nonce\n     * @param v             v of the signature\n     * @param r             r of the signature\n     * @param s             s of the signature\n     */\n    function receiveWithAuthorization(\n        address from,\n        address to,\n        uint256 value,\n        uint256 validAfter,\n        uint256 validBefore,\n        bytes32 nonce,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external whenNotPaused {\n        if (to != msg.sender) revert CallerMustBePayee();\n\n        bytes memory signature = abi.encodePacked(r, s, v);\n        _transferWithAuthorization(\n            RECEIVE_WITH_AUTHORIZATION_TYPEHASH,\n            from,\n            to,\n            value,\n            validAfter,\n            validBefore,\n            nonce,\n            signature\n        );\n    }\n\n    /**\n     * @notice Receive a transfer with a signed authorization from the payer\n     * @dev This has an additional check to ensure that the payee's address matches\n     * the caller of this function to prevent front-running attacks. (See security\n     * considerations)\n     * @param from          Payer's address (Authorizer)\n     * @param to            Payee's address\n     * @param value         Amount to be transferred\n     * @param validAfter    The time after which this is valid (unix time)\n     * @param validBefore   The time before which this is valid (unix time)\n     * @param nonce         Unique nonce\n     * @param signature     Unstructured bytes signature signed by an EOA wallet or a contract wallet\n     */\n    function receiveWithAuthorization(\n        address from,\n        address to,\n        uint256 value,\n        uint256 validAfter,\n        uint256 validBefore,\n        bytes32 nonce,\n        bytes memory signature\n    ) external whenNotPaused {\n        if (to != msg.sender) revert CallerMustBePayee();\n\n        _transferWithAuthorization(\n            RECEIVE_WITH_AUTHORIZATION_TYPEHASH,\n            from,\n            to,\n            value,\n            validAfter,\n            validBefore,\n            nonce,\n            signature\n        );\n    }\n\n    /**\n     * @notice Attempt to cancel an authorization\n     * @param authorizer    Authorizer's address\n     * @param nonce         Nonce of the authorization\n     * @param v             v of the signature\n     * @param r             r of the signature\n     * @param s             s of the signature\n     */\n    function cancelAuthorization(\n        address authorizer,\n        bytes32 nonce,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external whenNotPaused {\n        bytes memory signature = abi.encodePacked(r, s, v);\n        _cancelAuthorization(authorizer, nonce, signature);\n    }\n\n    /**\n     * @notice Attempt to cancel an authorization\n     * @param authorizer    Authorizer's address\n     * @param nonce         Nonce of the authorization\n     * @param signature     Unstructured bytes signature signed by an EOA wallet or a contract wallet\n     */\n    function cancelAuthorization(\n        address authorizer,\n        bytes32 nonce,\n        bytes memory signature\n    ) external whenNotPaused {\n        _cancelAuthorization(authorizer, nonce, signature);\n    }\n\n    /**\n     * @dev Internal function to cancel an authorization using bytes signature\n     * @param authorizer    Authorizer's address\n     * @param nonce         Nonce of the authorization\n     * @param signature     Packed signature bytes\n     */\n    function _cancelAuthorization(\n        address authorizer,\n        bytes32 nonce,\n        bytes memory signature\n    ) internal {\n        if (_isAddrFrozen(authorizer)) revert AddressFrozen();\n        if (_authorizationStates[authorizer][nonce]) {\n            emit AuthorizationAlreadyUsed(authorizer, nonce);\n            return; //Return instead of throwing an error to prevent front running from blocking complex txs\n        }\n\n        bytes32 digest = keccak256(abi.encodePacked(\n            EIP712_VERSION_PREFIX,\n            DOMAIN_SEPARATOR(),\n            keccak256(abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce))\n        ));\n\n        if (!SignatureChecker.isValidSignatureNow(authorizer, digest, signature)) revert InvalidSignature();\n\n        _authorizationStates[authorizer][nonce] = true;\n        emit AuthorizationCanceled(authorizer, nonce);\n    }\n\n\n    /*\n     * @dev Internal function to execute a single transfer with a signed authorization using bytes signature\n     * @param typeHash      The typehash of transfer or receive.\n     * @param from          Payer's address (Authorizer)\n     * @param to            Payee's address\n     * @param value         Amount to be transferred\n     * @param validAfter    The time after which this is valid (unix time)\n     * @param validBefore   The time before which this is valid (unix time)\n     * @param nonce         Unique nonce\n     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet\n     */\n    function _transferWithAuthorization(\n        bytes32 typeHash,\n        address from,\n        address to,\n        uint256 value,\n        uint256 validAfter,\n        uint256 validBefore,\n        bytes32 nonce,\n        bytes memory signature\n    ) internal {\n        if (block.timestamp <= validAfter) revert AuthorizationInvalid();\n        if (block.timestamp >= validBefore) revert AuthorizationExpired();\n\n        if (_authorizationStates[from][nonce]) {\n            emit AuthorizationAlreadyUsed(from, nonce);\n            return; //Return instead of throwing an error to prevent front running from blocking batches\n        }\n\n        bytes32 digest = keccak256(abi.encodePacked(\n            EIP712_VERSION_PREFIX,\n            DOMAIN_SEPARATOR(),\n            keccak256(abi.encode(typeHash, from, to, value, validAfter, validBefore, nonce))\n        ));\n\n        if (!SignatureChecker.isValidSignatureNow(from, digest, signature)) revert InvalidSignature();\n\n        _authorizationStates[from][nonce] = true;\n        emit AuthorizationUsed(from, nonce);\n\n        _transfer(from, to, value);\n    }\n}"},"contracts/lib/EIP3009Definitions.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\n/**\n * @title EIP3009Definitions\n * @dev Shared constants, errors, and events for EIP-3009 (Transfer with Authorization) functionality\n * @notice This contract only defines constants, errors, and events - no storage or functions\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract EIP3009Definitions {\n    // keccak256(\"TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)\")\n    bytes32 public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH =\n        0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;\n\n    // keccak256(\"ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)\")\n    bytes32 public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH =\n        0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;\n\n    // keccak256(\"CancelAuthorization(address authorizer,bytes32 nonce)\")\n    bytes32 public constant CANCEL_AUTHORIZATION_TYPEHASH =\n        0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;\n\n    error CallerMustBePayee();\n    error AuthorizationInvalid();\n    error AuthorizationExpired();\n    error BlockedAccountAuthorizer();\n\n    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);\n    event AuthorizationCanceled(address indexed authorizer, bytes32 indexed nonce);\n    event AuthorizationAlreadyUsed(address indexed authorizer, bytes32 indexed nonce);\n}"},"contracts/lib/EIP712.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\n/**\n * @title EIP712\n * @notice A library that provides EIP712 helper functions\n * @custom:security-contact smart-contract-security@paxos.com\n */\nlibrary EIP712 {\n    // keccak256(\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\")\n    bytes32 public constant EIP712_DOMAIN_TYPEHASH = 0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f;\n\n    /**\n     * @notice Make EIP712 domain separator\n     * @param name      Contract name\n     * @param version   Contract version\n     * @return Domain separator\n     */\n    function _makeDomainSeparator(string memory name, string memory version) internal view returns (bytes32) {\n        return\n            keccak256(\n                abi.encode(\n                    EIP712_DOMAIN_TYPEHASH,\n                    keccak256(bytes(name)),\n                    keccak256(bytes(version)),\n                    block.chainid,\n                    address(this)\n                )\n            );\n    }\n}\n"},"contracts/lib/EIP712Domain.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\n/**\n * @title EIP712Domain contract\n * @dev An Abstract contract to provide the domain separator for EIP712 signatures.\n * This contract is inherited by EIP3009 and EIP2612.\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract EIP712Domain {\n    // EIP-712 version prefix used in signature verification\n    bytes2 public constant EIP712_VERSION_PREFIX = hex\"1901\";\n\n    /**\n     * @dev Storage slot for deprecated domain separator (kept for storage compatibility)\n     * @dev This storage variable is no longer used as domain separator is always recomputed\n     */\n    bytes32 private DOMAIN_SEPARATOR_DEPRECATED; // solhint-disable-line var-name-mixedcase\n\n    /**\n     * @notice EIP712 Domain Separator\n     * @dev Returns domain separator, always recomputed to handle chain forks\n     * @return The domain separator for EIP-712 signatures\n     */\n    function DOMAIN_SEPARATOR() public view virtual returns (bytes32);\n}"},"contracts/lib/PaxosBaseAbstract.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\n/**\n * @title PaxosBaseAbstract contract\n * @dev An abstract contract for Paxos tokens with additional internal functions.\n * @custom:security-contact smart-contract-security@paxos.com\n */\nabstract contract PaxosBaseAbstract {\n    // keccak256(\"PAUSE_ROLE\")\n    bytes32 public constant PAUSE_ROLE = 0x139c2898040ef16910dc9f44dc697df79363da767d8bc92f2e310312b816e46d;\n    // keccak256(\"ASSET_PROTECTION_ROLE\")\n    bytes32 public constant ASSET_PROTECTION_ROLE = 0xe3e4f9d7569515307c0cdec302af069a93c9e33f325269bac70e6e22465a9796;\n\n    // All base errors.\n    error ZeroAddress();\n    error ContractPaused();\n    error AddressFrozen();\n    error InvalidPermission();\n    error AccessControlUnauthorizedAccount(address account, bytes32 role);\n    error InvalidSignature();\n    error ArgumentLengthMismatch();\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     */\n    modifier whenNotPaused() {\n        if (_isPaused()) revert ContractPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to check for zero address.\n     */\n    modifier isNonZeroAddress(address addr) {\n        if (addr == address(0)) revert ZeroAddress();\n        _;\n    }\n\n    /*\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return \"PaxosToken USD\";\n    }\n\n    /*\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return \"PaxosToken\";\n    }\n\n    /*\n     * @dev Returns the decimal count of the token.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /**\n     * @dev Set allowance for a given spender, of a given owner.\n     * @param owner address The address which owns the funds.\n     * @param spender address The address which will spend the funds.\n     * @param value uint256 The amount of tokens to increase the allowance by.\n     */\n    function _approve(address owner, address spender, uint256 value) internal virtual;\n\n    /**\n     * @dev Transfer `value` amount `from` => `to`.\n     * @param from address The address which you want to send tokens from\n     * @param to address The address which you want to send tokens to\n     * @param value uint256 the amount of tokens to be transferred\n     */\n    function _transfer(address from, address to, uint256 value) internal virtual;\n\n    /**\n     * @dev Check if contract is paused.\n     * @return bool True if the contract is paused, false otherwise.\n     */\n    function _isPaused() internal view virtual returns (bool);\n\n    /**\n     * @dev Internal function to check whether the address is currently frozen by checking\n     * the sanctioned list first.\n     * @param addr The address to check if frozen.\n     * @return A bool representing whether the given address is frozen.\n     */\n    function _isAddrFrozen(address addr) internal view virtual returns (bool);\n}"},"contracts/lib/RateLimit.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { DoubleEndedQueue } from \"@openzeppelin/contracts/utils/structs/DoubleEndedQueue.sol\";\nimport { Math } from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport { SafeMath } from \"@openzeppelin/contracts/utils/math/SafeMath.sol\";\nimport \"hardhat/console.sol\";\n\n/**\n * @title RateLimit library\n * @dev Performs rate limiting using an elapsed time algorithm\n * @custom:security-contact smart-contract-security@paxos.com\n */\nlibrary RateLimit {\n    uint256 constant SKIP_RATE_LIMIT_CHECK = 0;\n    struct Storage {\n        // Limit configuration\n        LimitConfig limitConfig;    // 64 bytes (2 uint256s)\n        // Remaining amount for the time period\n        uint256 remainingAmount;    // 32 bytes\n        //Timestamp of last event\n        uint256 lastRefillTime;     // 32 bytes\n        // Total: 128 bytes (4 slots of 32 bytes each)\n    }\n    struct LimitConfig {\n        // Max amount for the rate limit\n        uint256 limitCapacity;      // 32 bytes\n        // Amount to add to limit each second up to the limitCapacity\n        uint256 refillPerSecond;    // 32 bytes\n        // Total: 64 bytes (2 slots of 32 bytes each)\n    }\n\n    error RateLimitExceeded();\n    error OldTimestamp(uint256 timestamp, uint256 expected);\n\n    /**\n     * @dev Uses an elapsed time algorithm to determine if the new event is allowed or not.\n     * High level steps:\n     *   1. Calculate elapsed time since last event\n     *   2. Calculate amount that can be sent at the current `timestamp`\n     *   3. Check if rate limit is exceeded or not and update remaining amount\n     *\n     * @param timestamp Timestamp of the new event\n     * @param amount Amount of the new event\n     * @param limitStorage Storage data specific to the rate limit check\n     */\n    function checkNewEvent(uint256 timestamp, uint256 amount, Storage storage limitStorage) internal {\n        //Limit time period of 0 is a special value indicating we should skip rate limit checking\n        if (limitStorage.limitConfig.refillPerSecond == SKIP_RATE_LIMIT_CHECK) {\n            return;\n        }\n        limitStorage.remainingAmount = refill(timestamp, limitStorage);\n        limitStorage.lastRefillTime = timestamp;\n        if (amount > limitStorage.remainingAmount) {\n            revert RateLimitExceeded();\n        }\n        limitStorage.remainingAmount -= amount;\n    }\n\n    /**\n     * @dev Gets remaining amount that can be sent in the window\n     * @param timestamp Timestamp to check remaining amount for\n     * @param limitStorage Storage data specific to the rate limit check\n     */\n    function getRemainingAmount(uint256 timestamp, Storage storage limitStorage) internal view returns (uint256) {\n        // Limit time period of 0 is a special value indicating we should skip rate limit checking\n        if (limitStorage.limitConfig.refillPerSecond == SKIP_RATE_LIMIT_CHECK) {\n            return type(uint256).max;\n        }\n        return refill(timestamp, limitStorage);\n    }\n\n    /**\n     * @dev Refills the amount based on the elapsed time from the previous event.\n     * `timestamp` cannot be older than the `lastRefillTime`.\n     * @param timestamp Timestamp of the new event\n     * @param limitStorage Storage data specific to the rate limit check\n     */\n    function refill(uint256 timestamp, Storage storage limitStorage) private view returns (uint256) {\n        if (limitStorage.lastRefillTime > timestamp) {\n            revert OldTimestamp(timestamp, limitStorage.lastRefillTime);\n        }\n        uint256 secondsElapsed = timestamp - limitStorage.lastRefillTime;\n        (bool safeMul, uint256 newTokens) = SafeMath.tryMul(secondsElapsed, limitStorage.limitConfig.refillPerSecond);\n        (bool safeAdd, uint256 amount) = SafeMath.tryAdd(limitStorage.remainingAmount, newTokens);\n        if (!safeMul || !safeAdd) {\n            return limitStorage.limitConfig.limitCapacity;\n        }\n        return Math.min(limitStorage.limitConfig.limitCapacity, amount);\n    }\n}\n"},"contracts/PaxosTokenV2.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { BaseStorage } from \"./BaseStorage.sol\";\nimport { SupplyControl } from \"./SupplyControl.sol\";\nimport { EIP2612 } from \"./lib/EIP2612.sol\";\nimport { EIP3009 } from \"./lib/EIP3009.sol\";\nimport { EIP712 } from \"./lib/EIP712.sol\";\nimport { AccessControlDefaultAdminRulesUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/AccessControlDefaultAdminRulesUpgradeable.sol\";\n\n/**\n * @title PaxosTokenV2\n * @dev this contract is a Pausable ERC20 token with Burn and Mint\n * controlled by a `SupplyControl` contract.\n * NOTE: The storage defined here will actually be held in the Proxy\n * contract and all calls to this contract should be made through\n * the proxy, including admin actions done as owner or supplyController.\n * Any call to transfer against this contract should fail\n * with insufficient funds since no tokens will be issued there.\n * @custom:security-contact smart-contract-security@paxos.com\n */\ncontract PaxosTokenV2 is BaseStorage, EIP2612, EIP3009, AccessControlDefaultAdminRulesUpgradeable {\n    /**\n     * EVENTS\n     */\n\n    // ERC20 BASIC EVENTS\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    // ERC20 EVENTS\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    // PAUSABLE EVENTS\n    event Pause();\n    event Unpause();\n\n    // ASSET PROTECTION EVENTS\n    event FrozenAddressWiped(address indexed addr);\n    event FreezeAddress(address indexed addr);\n    event UnfreezeAddress(address indexed addr);\n\n    // SUPPLY CONTROL EVENTS\n    event SupplyIncreased(address indexed to, uint256 value);\n    event SupplyDecreased(address indexed from, uint256 value);\n    event SupplyControlSet(address supplyControlAddress);\n\n    // Event when sanction address changes.\n    event SanctionedAddressListUpdate(address newSanctionedAddress);\n\n    /**\n     * ERRORS\n     */\n    error OnlySupplyController();\n    error InsufficientFunds();\n    error AddressNotFrozen();\n    error ZeroValue();\n    error AlreadyPaused();\n    error AlreadyUnPaused();\n    error InsufficientAllowance();\n    error SupplyControllerUnchanged();\n    error OnlySupplyControllerOrOwner();\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor() {\n        _disableInitializers();\n    }\n\n    /**\n     * External Functions\n     */\n\n    /**\n     * @notice Reclaim all tokens at the contract address\n     * @dev Transfers the tokens this contract holds, to the owner of smart contract.\n     * Note: This is not affected by freeze constraints.\n     */\n    function reclaimToken() external onlyRole(DEFAULT_ADMIN_ROLE) {\n        uint256 _balance = balances[address(this)];\n        address owner = owner();\n        balances[address(this)] = 0;\n        balances[owner] += _balance;\n        emit Transfer(address(this), owner, _balance);\n    }\n\n    /**\n     * @dev Update the supply control contract which controls minting and burning for this token.\n     * @param supplyControlAddress Supply control contract address\n     */\n    function setSupplyControl(\n        address supplyControlAddress\n    ) external onlyRole(DEFAULT_ADMIN_ROLE) isNonZeroAddress(supplyControlAddress) {\n        supplyControl = SupplyControl(supplyControlAddress);\n        emit SupplyControlSet(supplyControlAddress);\n    }\n\n    /**\n     * @notice Return the freeze status of an address.\n     * @dev Check if whether the address is currently frozen.\n     * @param addr The address to check if frozen.\n     * @return A bool representing whether the given address is frozen.\n     */\n    function isFrozen(address addr) external view returns (bool) {\n        return _isAddrFrozen(addr);\n    }\n\n    /**\n     * Public Functions\n     */\n\n    /**\n     * @notice Initialize the contract.\n     * @dev Wrapper around {_initialize}. This is useful to get the version before\n     * it is updated by {reinitializer}.\n     * @param initialDelay Initial delay for changing the owner\n     * @param initialOwner Address of the initial owner\n     * @param pauser Address of the pauser\n     * @param assetProtector Address of the asset protector\n     */\n    function initialize(uint48 initialDelay, address initialOwner, address pauser, address assetProtector) public {\n        uint64 pastVersion = _getInitializedVersion();\n        _initialize(pastVersion, initialDelay, initialOwner, pauser, assetProtector);\n    }\n\n    /**\n     * @notice Returns the total supply of the token.\n     * @return An uint256 representing the total supply of the token.\n     */\n    function totalSupply() public view returns (uint256) {\n        return totalSupply_;\n    }\n\n    /**\n     * @notice Execute a transfer\n     * @dev Transfer token to the specified address from msg.sender\n     * @param to The address to transfer to\n     * @param value The amount to be transferred\n     * @return True if successful\n     */\n    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {\n        _transfer(msg.sender, to, value);\n        return true;\n    }\n\n    /**\n     * @notice Gets the balance of the specified address\n     * @param addr The address to query the the balance of\n     * @return An uint256 representing the amount owned by the passed address\n     */\n    function balanceOf(address addr) public view returns (uint256) {\n        return balances[addr];\n    }\n\n    /**\n     * @notice Transfer tokens from one address to another\n     * @param from address The address which you want to send tokens from\n     * @param to address The address which you want to transfer to\n     * @param value uint256 the amount of tokens to be transferred\n     * @return True if successful\n     */\n    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {\n        if (_isAddrFrozen(msg.sender)) revert AddressFrozen();\n        _transferFromAllowance(from, to, value);\n        return true;\n    }\n\n    /**\n     * @notice Transfer tokens from one set of addresses to another in a single transaction\n     * @param from addres[] The addresses which you want to send tokens from\n     * @param to address[] The addresses which you want to transfer to\n     * @param value uint256[] The amounts of tokens to be transferred\n     * @return True if successful\n     */\n    function transferFromBatch(\n        address[] calldata from,\n        address[] calldata to,\n        uint256[] calldata value\n    ) public whenNotPaused returns (bool) {\n        // Validate length of each parameter with \"_from\" argument to make sure lengths of all input arguments are the same.\n        if (to.length != from.length || value.length != from.length) revert ArgumentLengthMismatch();\n        if (_isAddrFrozen(msg.sender)) revert AddressFrozen();\n        for (uint16 i = 0; i < from.length; i++) {\n            _transferFromAllowance(from[i], to[i], value[i]);\n        }\n        return true;\n    }\n\n    /**\n     * @notice Set allowance of spender to spend tokens on behalf of msg.sender\n     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.\n     * Beware that changing an allowance with this method brings the risk that someone may use both the old\n     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this\n     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     * @param spender The address which will spend the funds\n     * @param value The amount of tokens to be spent\n     * @return True if successful\n     */\n    function approve(address spender, uint256 value) public whenNotPaused isNonZeroAddress(spender) returns (bool) {\n        if (_isAddrFrozen(spender) || _isAddrFrozen(msg.sender)) revert AddressFrozen();\n        _approve(msg.sender, spender, value);\n        return true;\n    }\n\n    /**\n     * @notice Increase the allowance of spender to spend tokens on behalf of msg.sender\n     * @dev Increase the amount of tokens that an owner allowed to a spender.\n     * To increment allowed value is better to use this function to avoid 2 calls (and wait until the first transaction\n     * is mined) instead of approve.\n     * @param spender The address which will spend the funds\n     * @param addedValue The amount of tokens to increase the allowance by\n     * @return True if successful\n     */\n    function increaseApproval(address spender, uint256 addedValue) public whenNotPaused returns (bool) {\n        if (_isAddrFrozen(spender) || _isAddrFrozen(msg.sender)) revert AddressFrozen();\n        if (addedValue == 0) revert ZeroValue();\n        allowed[msg.sender][spender] += addedValue;\n        emit Approval(msg.sender, spender, allowed[msg.sender][spender]);\n        return true;\n    }\n\n    /**\n     * @notice Decrease the allowance of spender to spend tokens on behalf of msg.sender\n     * @dev Decrease the amount of tokens that an owner allowed to a spender.\n     * To decrement allowed value is better to use this function to avoid 2 calls (and wait until the first transaction\n     * is mined) instead of approve.\n     * @param spender The address which will spend the funds\n     * @param subtractedValue The amount of tokens to decrease the allowance by\n     * @return True if successful\n     */\n    function decreaseApproval(address spender, uint256 subtractedValue) public whenNotPaused returns (bool) {\n        if (_isAddrFrozen(spender) || _isAddrFrozen(msg.sender)) revert AddressFrozen();\n        if (subtractedValue == 0) revert ZeroValue();\n        if (subtractedValue > allowed[msg.sender][spender]) {\n            allowed[msg.sender][spender] = 0;\n        } else {\n            allowed[msg.sender][spender] -= subtractedValue;\n        }\n        emit Approval(msg.sender, spender, allowed[msg.sender][spender]);\n        return true;\n    }\n\n    /**\n     * @dev Get the amount of token allowance that an owner allowed to a spender\n     * @param owner address The address which owns the funds\n     * @param spender address The address which will spend the funds\n     * @return A uint256 specifying the amount of tokens still available for the spender\n     */\n    function allowance(address owner, address spender) public view returns (uint256) {\n        return allowed[owner][spender];\n    }\n\n    /**\n     * @notice Pause the contract\n     * @dev called by the owner to pause, triggers stopped state\n     */\n    function pause() public onlyRole(PAUSE_ROLE) {\n        if (paused) revert AlreadyPaused();\n        paused = true;\n        emit Pause();\n    }\n\n    /**\n     * @notice Unpause the contract\n     * @dev called by the owner to unpause, returns to normal state\n     */\n    function unpause() public onlyRole(PAUSE_ROLE) {\n        if (!paused) revert AlreadyUnPaused();\n        paused = false;\n        emit Unpause();\n    }\n\n    // ASSET PROTECTION FUNCTIONALITY\n    /**\n     * @notice Wipe the token balance of a frozen address\n     * @dev Wipes the balance of a frozen address, and burns the tokens\n     * @param addr The new frozen address to wipe\n     */\n    function wipeFrozenAddress(address addr) public onlyRole(ASSET_PROTECTION_ROLE) {\n        if (!_isAddrFrozen(addr)) revert AddressNotFrozen();\n        uint256 balance = balances[addr];\n        balances[addr] = 0;\n        totalSupply_ -= balance;\n        emit FrozenAddressWiped(addr);\n        emit SupplyDecreased(addr, balance);\n        emit Transfer(addr, address(0), balance);\n    }\n\n    /**\n     * @dev Freezes an address balance from being transferred.\n     * @param addr The address to freeze.\n     */\n    function freeze(address addr) public onlyRole(ASSET_PROTECTION_ROLE) {\n        _freeze(addr);\n    }\n\n    /**\n     * @dev Freezes all addresses balance from being transferred.\n     * @param addresses The addresses to freeze.\n     */\n    function freezeBatch(address[] calldata addresses) public onlyRole(ASSET_PROTECTION_ROLE) {\n        for (uint256 i = 0; i < addresses.length; ) {\n            _freeze(addresses[i]);\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    /**\n     * @dev Unfreezes an address balance allowing transfer.\n     * @param addr The new address to unfreeze.\n     */\n    function unfreeze(address addr) public onlyRole(ASSET_PROTECTION_ROLE) {\n        _unfreeze(addr);\n    }\n\n    /**\n     * @dev Unfreezes all addresses balance from being transferred.\n     * @param addresses The addresses to unfreeze.\n     */\n    function unfreezeBatch(address[] calldata addresses) public onlyRole(ASSET_PROTECTION_ROLE) {\n        for (uint256 i = 0; i < addresses.length; ) {\n            _unfreeze(addresses[i]);\n            unchecked {\n                ++i;\n            }\n        }\n    }\n\n    /**\n     * @notice Increases the total supply by minting the specified number of tokens to the supply controller account.\n     * Function is marked virtual to aid in testing, but is never overridden on the actual token.\n     * @param value The number of tokens to add\n     * @param mintToAddress Address to mint tokens to.\n     * @return success A boolean that indicates if the operation was successful\n     */\n    function increaseSupplyToAddress(uint256 value, address mintToAddress) public virtual returns (bool success) {\n        require(!_isAddrFrozen(mintToAddress), \"mintToAddress frozen\");\n        supplyControl.canMintToAddress(mintToAddress, value, msg.sender);\n\n        totalSupply_ += value;\n        balances[mintToAddress] += value;\n        emit SupplyIncreased(mintToAddress, value);\n        emit Transfer(address(0), mintToAddress, value);\n        return true;\n    }\n\n    /**\n     * @dev Wrapper around 'increaseSupplyToAddress' to extend the API\n     * @param value The number of tokens to add. \n     * @return success A boolean that indicates if the operation was successful\n     */\n    function increaseSupply(uint256 value) public returns (bool success) {\n        return increaseSupplyToAddress(value, msg.sender);\n    }\n\n    /**\n     * @dev Wrapper around `increaseSupplyToAddress` to extend the API\n     * @param account Address to mint tokens to\n     * @param amount The number of tokens to add\n     */\n    function mint(address account, uint256 amount) public {\n        increaseSupplyToAddress(amount, account);\n    }\n\n    /**\n     * @notice Decreases the total supply by burning the specified number of tokens.  Can only be called by a\n     * supply controller. Function is marked virtual to aid in testing, but is never overridden on the actual token.\n     * @param value The number of tokens to remove\n     * @param burnFromAddress Address to burn tokens from.\n     * @return success A boolean that indicates if the operation was successful\n     */\n    function decreaseSupplyFromAddress(uint256 value, address burnFromAddress) public virtual returns (bool success) {\n        require(!_isAddrFrozen(burnFromAddress), \"burnFromAddress frozen\");\n        supplyControl.canBurnFromAddress(burnFromAddress, msg.sender);\n        if (value > balances[burnFromAddress]) revert InsufficientFunds();\n\n        balances[burnFromAddress] -= value;\n        totalSupply_ -= value;\n        emit SupplyDecreased(burnFromAddress, value);\n        emit Transfer(burnFromAddress, address(0), value);\n        return true;\n    }\n\n    /**\n     * @dev Wrapper around 'decreaseSupplyFromAddress' to extend the API\n     * @param value The number of tokens to remove.  \n     * @return success A boolean that indicates if the operation was successful\n     */\n    function decreaseSupply(uint256 value) public returns (bool success) {\n        return decreaseSupplyFromAddress(value, msg.sender);\n    }\n\n    /**\n     * @dev Wrapper around `decreaseSupply` to extend the API\n     * @param amount The number of tokens to remove\n     */\n    function burn(uint256 amount) public {\n        decreaseSupply(amount);\n    }\n\n    /**\n     * Internal Functions\n     */\n\n    /**\n     * @dev See {PaxosBaseAbstract-_isPaused}\n     */\n    function _isPaused() internal view override returns (bool) {\n        return paused;\n    }\n\n    /**\n     * @dev See {PaxosBaseAbstract-_isAddrFrozen}\n     */\n    function _isAddrFrozen(address addr) internal view override returns (bool) {\n        return frozen[addr];\n    }\n\n    /**\n     * @dev Internal function to transfer balances from => to.\n     * Internal to the contract - see transferFrom and transferFromBatch.\n     * @param from address The address which you want to send tokens from\n     * @param to address The address which you want to transfer to\n     * @param value uint256 the amount of tokens to be transferred\n     */\n    function _transferFromAllowance(address from, address to, uint256 value) internal {\n        if (value > allowed[from][msg.sender]) revert InsufficientAllowance();\n        _transfer(from, to, value);\n        allowed[from][msg.sender] -= value;\n    }\n\n    /**\n     * @dev See {PaxosBaseAbstract-_approve}\n     */\n    function _approve(address owner, address spender, uint256 value) internal override {\n        allowed[owner][spender] = value;\n        emit Approval(owner, spender, value);\n    }\n\n    /**\n     * @dev See {PaxosBaseAbstract-_transfer}\n     */\n    function _transfer(address from, address to, uint256 value) internal override isNonZeroAddress(to) {\n        if (_isAddrFrozen(to) || _isAddrFrozen(from)) revert AddressFrozen();\n        if (value > balances[from]) revert InsufficientFunds();\n\n        balances[from] -= value;\n        balances[to] += value;\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * Private Functions\n     */\n\n    /**\n     * @dev Called on deployment, can only be called once. If the contract is ever upgraded,\n     * the version in reinitializer will be incremented and additional initialization logic\n     * can be added for the new version.\n     * @param pastVersion Previous contract version\n     * @param initialDelay Initial delay for changing the owner\n     * @param initialOwner Address of the initial owner\n     * @param pauser Address of the pauser\n     * @param assetProtector Address of the asset protector\n     */\n    function _initialize(\n        uint64 pastVersion,\n        uint48 initialDelay,\n        address initialOwner,\n        address pauser,\n        address assetProtector\n    ) private reinitializer(2) {\n        _initializeV1(pastVersion);\n        _initializeV2(initialDelay, initialOwner, pauser, assetProtector);\n    }\n\n    /**\n     * @dev Called on deployment to initialize V1 state. If contract already initialized,\n     * it returns immediately.\n     * @param pastVersion Previous contract version\n     */\n    function _initializeV1(uint64 pastVersion) private {\n        if (pastVersion < 1 && !initializedV1) {\n            //Need this second condition since V1 could have used old upgrade pattern\n            totalSupply_ = 0;\n            initializedV1 = true;\n        }\n    }\n\n    /**\n     * @dev Called on deployment to initialize V2 state\n     * @param initialDelay Initial delay for changing the owner\n     * @param initialOwner Address of the initial owner\n     * @param pauser Address of the pauser\n     * @param assetProtector Address of the assetProtector\n     */\n    function _initializeV2(\n        uint48 initialDelay,\n        address initialOwner,\n        address pauser,\n        address assetProtector\n    ) private isNonZeroAddress(pauser) isNonZeroAddress(assetProtector) {\n        __AccessControlDefaultAdminRules_init(initialDelay, initialOwner);\n        _grantRole(PAUSE_ROLE, pauser);\n        _grantRole(ASSET_PROTECTION_ROLE, assetProtector);\n    }\n\n    /**\n     * @dev Private function to Freezes an address balance from being transferred.\n     * @param addr The addresses to freeze.\n     */\n    function _freeze(address addr) private {\n        frozen[addr] = true;\n        emit FreezeAddress(addr);\n    }\n\n    /**\n     * @dev Private function to Unfreezes an address balance from being transferred.\n     * @param addr The addresses to unfreeze.\n     */\n    function _unfreeze(address addr) private {\n        delete frozen[addr];\n        emit UnfreezeAddress(addr);\n    }\n\n    /**\n     * @notice EIP712 Domain Separator\n     * @dev Returns domain separator, always recomputed to handle chain forks\n     * @return The domain separator for EIP-712 signatures\n     */\n    function DOMAIN_SEPARATOR() public view override returns (bytes32) {\n        return EIP712._makeDomainSeparator(name(), \"1\");\n    }\n}\n"},"contracts/stablecoins/USDP.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.28;\n\n\nimport { PaxosTokenV2 } from \"./../PaxosTokenV2.sol\";\n\n/**\n * @title USDP Smart contract\n * @dev This contract is a {PaxosTokenV2-PaxosTokenV2} ERC20 token.\n * @custom:security-contact smart-contract-security@paxos.com\n */\ncontract USDP is PaxosTokenV2 {\n    /*\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual override returns (string memory) {\n        return \"Pax Dollar\";\n    }\n\n    /*\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() public view virtual override returns (string memory) {\n        return \"USDP\";\n    }\n\n    /*\n     * @dev Returns the decimal count of the token.\n     */\n    function decimals() public view virtual override returns (uint8) {\n        return 18;\n    }\n}\n"},"contracts/SupplyControl.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport { AccessControlDefaultAdminRulesUpgradeable } from \"@openzeppelin/contracts-upgradeable/access/AccessControlDefaultAdminRulesUpgradeable.sol\";\nimport { UUPSUpgradeable } from \"@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol\";\nimport { IAccessControl } from \"@openzeppelin/contracts/access/IAccessControl.sol\";\nimport { EnumerableSet } from \"@openzeppelin/contracts/utils/structs/EnumerableSet.sol\";\nimport { DoubleEndedQueue } from \"@openzeppelin/contracts/utils/structs/DoubleEndedQueue.sol\";\nimport { PaxosBaseAbstract } from \"./lib/PaxosBaseAbstract.sol\";\nimport { RateLimit } from \"./lib/RateLimit.sol\";\n\n/**\n * @title SupplyControl\n * @dev control the token supply. The `SUPPLY_CONTROLLER_MANAGER_ROLE` role is responsible for managing\n * addresses with the `SUPPLY_CONTROLLER_ROLE`, referred to as supplyControllers. Only supplyControllers can\n * mint and burn tokens. SupplyControllers can optionally have rate limits to limit how many tokens can be\n * minted over a given time frame.\n * @custom:security-contact smart-contract-security@paxos.com\n */\ncontract SupplyControl is AccessControlDefaultAdminRulesUpgradeable, UUPSUpgradeable {\n    using EnumerableSet for EnumerableSet.AddressSet;\n    // Access control roles\n    // keccak256(\"SUPPLY_CONTROLLER_MANAGER_ROLE\")\n    // Can add, update, and remove `SupplyController`s\n    bytes32 public constant SUPPLY_CONTROLLER_MANAGER_ROLE =\n        0x5d3e9f1ecbcdad7b0da30e7d29c9eddaef83a4502dafe3d2dd85cfdb12e4af10;\n    // keccak256(\"SUPPLY_CONTROLLER_ROLE\")\n    // Can mint/burn tokens\n    bytes32 public constant SUPPLY_CONTROLLER_ROLE = 0x9c00d6f280439b1dfa4da90321e0a3f3c2e87280f4d07fea9fa43ff2cf02df2b;\n    // keccak256(\"TOKEN_CONTRACT_ROLE\")\n    // Tracks the token contract to protect functions which impact rate limits\n    bytes32 public constant TOKEN_CONTRACT_ROLE = 0xd32fd1ee5f4f111da6f27444787e5200ec57a8849509c00ef2998467052b32a3;\n\n    // SUPPLY CONTROL DATA\n    mapping(address => SupplyController) internal supplyControllerMap;\n\n    //Used to get all supply controllers\n    EnumerableSet.AddressSet internal supplyControllerSet;\n\n    uint256[35] private __gap_SC; // solhint-disable-line var-name-mixedcase\n\n    /**\n     * @dev Struct defines a supply controller. Different supply controllers can have different rules.\n     * @param rateLimit Contract which handles rate limit logic\n     * @param mintAddressWhitelist Addresses the {SupplyController} can mint to\n     * @param allowAnyMintAndBurnAddress If true, allows the supply controller to mint to and burn from any address\n     */\n    struct SupplyController {\n        RateLimit.Storage rateLimitStorage;           // 96 bytes (3 uint256s)\n        EnumerableSet.AddressSet mintAddressWhitelist; // 32 bytes (mapping storage pointer)\n        bool allowAnyMintAndBurnAddress;              // 1 byte\n        // Total: 129 bytes across multiple 32-byte slots\n    }\n\n    /**\n     * @dev Struct defines the configuration needed when creating a new supply controller.\n     * @param newSupplyController Address of the new supply controller\n     * @param limitConfig Limit configuration\n     * @param mintAddressWhitelist Addresses the supply controller can mint to\n     * @param allowAnyMintAndBurnAddress If true, allows the supply controller to mint to and burn from any address\n     */\n    struct SupplyControllerInitialization {\n        address newSupplyController;      // 20 bytes\n        RateLimit.LimitConfig limitConfig; // 64 bytes (2 uint256s)\n        address[] mintAddressWhitelist;   // dynamic array (32 bytes + length + data)\n        bool allowAnyMintAndBurnAddress;  // 1 byte\n        // Total: 117+ bytes across multiple 32-byte slots (dynamic due to array)\n    }\n\n    /**\n     * @dev Emitted when {addSupplyController} is called.\n     * @param newSupplyController Address of the new supply controller\n     * @param limitCapacity Max amount for the rate limit. Checked in `_checkCurrentPeriodAmount`\n     * @param refillPerSecond Amount to add to limit each second up to the `limitCapacity`\n     * @param mintAddressWhitelist Addresses the supply controller can mint to\n     * @param allowAnyMintAndBurnAddress If true, allows the supply controller to mint to and burn from any address\n     */\n    event SupplyControllerAdded(\n        address indexed newSupplyController,\n        uint256 limitCapacity,\n        uint256 refillPerSecond,\n        address[] mintAddressWhitelist,\n        bool allowAnyMintAndBurnAddress\n    );\n\n    /**\n     * @dev Emitted when {removeSupplyController} is called.\n     * @param oldSupplyController The old supply controller address\n     */\n    event SupplyControllerRemoved(address indexed oldSupplyController);\n\n    /**\n     * @dev Emitted when limit configuration is updated for `supplyController`.\n     * Occurs when {updateLimitConfig} is called.\n     * @param supplyController Supply controller address\n     * @param newLimitConfig New limit configuration\n     * @param oldLimitConfig Old limit configuration\n     */\n    event LimitConfigUpdated(\n        address indexed supplyController,\n        RateLimit.LimitConfig newLimitConfig,\n        RateLimit.LimitConfig oldLimitConfig\n    );\n\n    /**\n     * @dev Emitted when `allowAnyMintAndBurnAddress` is updated for `supplyController`.\n     * Occurs when {updateAllowAnyMintAndBurnAddress} is called.\n     * @param supplyController Supply controller address\n     * @param newAllowAnyMintAndBurnAddress New allow config\n     * @param oldAllowAnyMintAndBurnAddress Old allow config\n     */\n    event AllowAnyMintAndBurnAddressUpdated(\n        address indexed supplyController,\n        bool newAllowAnyMintAndBurnAddress,\n        bool oldAllowAnyMintAndBurnAddress\n    );\n\n    /**\n     * @dev Emitted when `mintAddress` is added to `mintAddressWhitelist` in `supplyController`.\n     * Occurs when {addMintAddressToWhitelist} is called\n     * @param supplyController Supply controller address\n     * @param mintAddress New address which can be minted to\n     */\n    event MintAddressAddedToWhitelist(address indexed supplyController, address indexed mintAddress);\n\n    /**\n     * @dev Emitted when `mintAddress` is removed from `mintAddressWhitelist` in `supplyController`.\n     * Occurs when {removeMintAddressFromWhitelist} is called\n     * @param supplyController Supply controller address\n     * @param mintAddress Address which can no longer be minted to\n     */\n    event MintAddressRemovedFromWhitelist(address indexed supplyController, address indexed mintAddress);\n\n    error AccountMissingSupplyControllerRole(address account);\n    error AccountAlreadyHasSupplyControllerRole(address account);\n    error CannotMintToAddress(address supplyController, address mintToAddress);\n    error CannotBurnFromAddress(address supplyController, address burnFromAddress);\n    error CannotAddDuplicateAddress(address addressToAdd);\n    error CannotRemoveNonExistantAddress(address addressToRemove);\n    error ZeroAddress();\n\n    /**\n     * @dev Modifier which checks that the specified `supplyController` address has the SUPPLY_CONTROLLER_ROLE\n     * @param supplyController Supply controller address\n     */\n    modifier onlySupplyController(address supplyController) {\n        if (!hasRole(SUPPLY_CONTROLLER_ROLE, supplyController)) {\n            revert AccountMissingSupplyControllerRole(supplyController);\n        }\n        _;\n    }\n\n    /**\n     * @dev Modifier which checks that the specified `supplyController` address does not have the SUPPLY_CONTROLLER_ROLE\n     * @param supplyController Supply controller address\n     */\n    modifier notSupplyController(address supplyController) {\n        if (hasRole(SUPPLY_CONTROLLER_ROLE, supplyController)) {\n            revert AccountAlreadyHasSupplyControllerRole(supplyController);\n        }\n        _;\n    }\n\n    /**\n     * @dev Modifier to check for zero address.\n     */\n    modifier isNonZeroAddress(address addr) {\n        if (addr == address(0)) {\n            revert ZeroAddress();\n        }\n        _;\n    }\n\n    /// @custom:oz-upgrades-unsafe-allow constructor\n    constructor() {\n        _disableInitializers();\n    }\n\n    /**\n     * @dev Initializer for SupplyControl.\n     * Proper order of setting up the contracts:\n     *  1. Deploy/reinitialize PaxosToken\n     *  2. Deploy SupplyControl with `SupplyControllerInitialization` config\n     *  3. Set SupplyControl address in PaxosToken via `setSupplyControl`\n     * @param initialOwner Initial owner address\n     * @param supplyControllerManager SupplyControllerManager address\n     * @param tokenAddress Token contract address\n     * @param scInitializationConfig Configuration to initialize a list of supply controllers\n     */\n    function initialize(\n        address initialOwner,\n        address supplyControllerManager,\n        address tokenAddress,\n        SupplyControllerInitialization[] calldata scInitializationConfig\n    ) external initializer isNonZeroAddress(supplyControllerManager) isNonZeroAddress(tokenAddress) {\n        __AccessControlDefaultAdminRules_init(3 hours, initialOwner);\n        __UUPSUpgradeable_init();\n        _grantRole(SUPPLY_CONTROLLER_MANAGER_ROLE, supplyControllerManager);\n        _grantRole(TOKEN_CONTRACT_ROLE, tokenAddress);\n        for (uint256 i = 0; i < scInitializationConfig.length; ) {\n            _addSupplyController(scInitializationConfig[i]);\n            unchecked {\n                i++;\n            }\n        }\n    }\n\n    /**\n     * @dev Adds a new supply controller which can be used to control the supply of a token.\n     * Can be called externally by the `SUPPLY_CONTROLLER_MANAGER_ROLE`.\n     * @param newSupplyController Address of the new supply controller\n     * @param limitCapacity Max amount for the rate limit.\n     * @param refillPerSecond Amount to add to limit each second up to the `limitCapacity`\n     * @param mintAddressWhitelist Addresses the supply controller can mint to\n     * @param allowAnyMintAndBurnAddress If true, allows the supply controller to mint to and burn from any address\n     */\n    function addSupplyController(\n        address newSupplyController,\n        uint256 limitCapacity,\n        uint256 refillPerSecond,\n        address[] memory mintAddressWhitelist,\n        bool allowAnyMintAndBurnAddress\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) {\n        RateLimit.LimitConfig memory limitConfig = RateLimit.LimitConfig(limitCapacity, refillPerSecond);\n        SupplyControllerInitialization memory scInitializationConfig = SupplyControllerInitialization(\n            newSupplyController,\n            limitConfig,\n            mintAddressWhitelist,\n            allowAnyMintAndBurnAddress\n        );\n        _addSupplyController(scInitializationConfig);\n    }\n\n    /**\n     * @dev Removes `oldSupplyController`\n     * @param oldSupplyController The old supply controller address\n     */\n    function removeSupplyController(\n        address oldSupplyController\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) onlySupplyController(oldSupplyController) {\n        _revokeRole(SUPPLY_CONTROLLER_ROLE, oldSupplyController);\n        SupplyController storage supplyController = supplyControllerMap[oldSupplyController];\n        _removeAddressSet(supplyController.mintAddressWhitelist);\n        EnumerableSet.remove(supplyControllerSet, oldSupplyController);\n        delete supplyControllerMap[oldSupplyController];\n        emit SupplyControllerRemoved(oldSupplyController);\n    }\n\n    /**\n     * Update limit configuration\n     * @param supplyController_ Supply controller address.\n     * @param limitCapacity Max amount for the rate limit\n     * @param refillPerSecond Amount to add to limit each second up to the `limitCapacity`\n     */\n    function updateLimitConfig(\n        address supplyController_,\n        uint256 limitCapacity,\n        uint256 refillPerSecond\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) onlySupplyController(supplyController_) {\n        RateLimit.LimitConfig memory limitConfig = RateLimit.LimitConfig(limitCapacity, refillPerSecond);\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        RateLimit.LimitConfig memory oldLimitConfig = supplyController.rateLimitStorage.limitConfig;\n        supplyController.rateLimitStorage.limitConfig = limitConfig;\n        emit LimitConfigUpdated(supplyController_, limitConfig, oldLimitConfig);\n    }\n\n    function updateAllowAnyMintAndBurnAddress(\n        address supplyController_,\n        bool allowAnyMintAndBurnAddress\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) onlySupplyController(supplyController_) {\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        bool oldAllowValue = supplyController.allowAnyMintAndBurnAddress;\n        supplyController.allowAnyMintAndBurnAddress = allowAnyMintAndBurnAddress;\n        emit AllowAnyMintAndBurnAddressUpdated(supplyController_, allowAnyMintAndBurnAddress, oldAllowValue);\n    }\n\n    /**\n     * @dev Adds `mintAddress` to `mintAddressWhitelist` in `supplyController`.\n     * @param supplyController_ Supply controller address\n     * @param mintAddress Address which can be minted to\n     */\n    function addMintAddressToWhitelist(\n        address supplyController_,\n        address mintAddress\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) onlySupplyController(supplyController_) {\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        if (EnumerableSet.contains(supplyController.mintAddressWhitelist, mintAddress)) {\n            revert CannotAddDuplicateAddress(mintAddress);\n        }\n        EnumerableSet.add(supplyController.mintAddressWhitelist, mintAddress);\n        emit MintAddressAddedToWhitelist(supplyController_, mintAddress);\n    }\n\n    /**\n     * @dev Removes `mintAddress` from `mintAddressWhitelist` in `supplyController`.\n     * @param supplyController_ Supply controller address\n     * @param mintAddress Address which can no longer be minted to\n     */\n    function removeMintAddressFromWhitelist(\n        address supplyController_,\n        address mintAddress\n    ) external onlyRole(SUPPLY_CONTROLLER_MANAGER_ROLE) onlySupplyController(supplyController_) {\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        if (!EnumerableSet.contains(supplyController.mintAddressWhitelist, mintAddress)) {\n            revert CannotRemoveNonExistantAddress(mintAddress);\n        }\n\n        EnumerableSet.remove(supplyController.mintAddressWhitelist, mintAddress);\n        emit MintAddressRemovedFromWhitelist(supplyController_, mintAddress);\n    }\n\n    /**\n     * @dev Gets supply controller configuration\n     * @param supplyController_ Supply controller address\n     */\n    function getSupplyControllerConfig(\n        address supplyController_\n    )\n        external\n        view\n        onlySupplyController(supplyController_)\n        returns (\n            RateLimit.LimitConfig memory limitConfig,\n            address[] memory mintAddressWhitelist,\n            bool allowAnyMintAndBurnAddress\n        )\n    {\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        RateLimit.LimitConfig memory limitConfig_ = supplyController.rateLimitStorage.limitConfig;\n        address[] memory mintAddressWhitelist_ = EnumerableSet.values(\n            supplyControllerMap[supplyController_].mintAddressWhitelist\n        );\n        return (limitConfig_, mintAddressWhitelist_, supplyController.allowAnyMintAndBurnAddress);\n    }\n\n    /**\n     * @dev Gets all supply controller addresses\n     */\n    function getAllSupplyControllerAddresses() external view returns (address[] memory) {\n        return EnumerableSet.values(supplyControllerSet);\n    }\n\n    /**\n     * @dev Get remaining amount which can be minted at `timestamp`\n     * @param supplyController_ Supply controller address\n     * @param timestamp Time to check remaining amount for\n     */\n    function getRemainingMintAmount(\n        address supplyController_,\n        uint256 timestamp\n    ) external view onlySupplyController(supplyController_) returns (uint256) {\n        SupplyController storage supplyController = supplyControllerMap[supplyController_];\n        RateLimit.Storage storage limitStorage = supplyController.rateLimitStorage;\n        return RateLimit.getRemainingAmount(timestamp, limitStorage);\n    }\n\n    /**\n     * @dev Function which checks that `mintToAddress` is in the whitelisted map for msg.sender\n     * and the amount does not exceed the rate limit\n     * @param mintToAddress Mint to address\n     * @param amount Amount to check\n     * @param sender Supply controller address\n     */\n    function canMintToAddress(\n        address mintToAddress,\n        uint256 amount,\n        address sender\n    ) external onlySupplyController(sender) onlyRole(TOKEN_CONTRACT_ROLE) {\n        SupplyController storage supplyController = supplyControllerMap[sender];\n        if (\n            !supplyController.allowAnyMintAndBurnAddress &&\n            !EnumerableSet.contains(supplyController.mintAddressWhitelist, mintToAddress)\n        ) {\n            revert CannotMintToAddress(sender, mintToAddress);\n        }\n        RateLimit.Storage storage limitStorage = supplyController.rateLimitStorage;\n        RateLimit.checkNewEvent(block.timestamp, amount, limitStorage);\n    }\n\n    /**\n     * @dev Function which checks that `burnFromAddress` is the 'sender' or that the 'sender' is allowed to burn\n     * from any address.\n     * Also checks that the `sender` is a supply controller since only a supply controller can burn tokens.\n     * @param burnFromAddress Burn from address\n     * @param sender Supply controller address\n     */\n    function canBurnFromAddress(address burnFromAddress, address sender) external view onlySupplyController(sender) {\n        SupplyController storage supplyController = supplyControllerMap[sender];\n        if (!supplyController.allowAnyMintAndBurnAddress && sender != burnFromAddress) {\n            revert CannotBurnFromAddress(sender, burnFromAddress);\n        }\n    }\n\n    /**\n     * @dev Adds a new supply controller which can be used to control the supply of a token.\n     * Can only be called internally.\n     * @param scInitializationConfig Configuration to setup a new supply controller\n     */\n    function _addSupplyController(\n        SupplyControllerInitialization memory scInitializationConfig\n    )\n        internal\n        notSupplyController(scInitializationConfig.newSupplyController)\n        isNonZeroAddress(scInitializationConfig.newSupplyController)\n    {\n        SupplyController storage supplyController = supplyControllerMap[scInitializationConfig.newSupplyController];\n        supplyController.rateLimitStorage.limitConfig = scInitializationConfig.limitConfig;\n        supplyController.allowAnyMintAndBurnAddress = scInitializationConfig.allowAnyMintAndBurnAddress;\n        _addressArrayToSet(scInitializationConfig.mintAddressWhitelist, supplyController.mintAddressWhitelist);\n        _grantRole(SUPPLY_CONTROLLER_ROLE, scInitializationConfig.newSupplyController);\n        EnumerableSet.add(supplyControllerSet, scInitializationConfig.newSupplyController);\n        emit SupplyControllerAdded(\n            scInitializationConfig.newSupplyController,\n            scInitializationConfig.limitConfig.limitCapacity,\n            scInitializationConfig.limitConfig.refillPerSecond,\n            scInitializationConfig.mintAddressWhitelist,\n            scInitializationConfig.allowAnyMintAndBurnAddress\n        );\n    }\n\n    /**\n     * @dev required by the OZ UUPS module to authorize an upgrade\n     * of the contract. Restricted to DEFAULT_ADMIN_ROLE.\n     */\n    function _authorizeUpgrade(address) internal override onlyRole(DEFAULT_ADMIN_ROLE) {} // solhint-disable-line no-empty-blocks\n\n    /**\n     * @dev Helper function for setting `mintAddressWhitelist`\n     * @param addressArray Array containing mint addresses\n     * @param addressSet Set which addresses should be added to\n     */\n    function _addressArrayToSet(address[] memory addressArray, EnumerableSet.AddressSet storage addressSet) private {\n        for (uint256 i = 0; i < addressArray.length; ) {\n            EnumerableSet.add(addressSet, addressArray[i]);\n            unchecked {\n                i++;\n            }\n        }\n    }\n\n    /**\n     * @dev Helper function for removing all addresses from `mintAddressWhitelist`\n     * Removes elements in reverse order to reduce array reordering and improve gas efficiency\n     * @param addressSet Set of addresses\n     */\n    function _removeAddressSet(EnumerableSet.AddressSet storage addressSet) private {\n        uint256 length = EnumerableSet.length(addressSet);\n        for (uint256 i = length; i > 0; ) {\n            unchecked {\n                i--;\n            }\n            EnumerableSet.remove(addressSet, EnumerableSet.at(addressSet, i));\n        }\n    }\n}\n"},"hardhat/console.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity >=0.4.22 <0.9.0;\n\nlibrary console {\n    address constant CONSOLE_ADDRESS =\n        0x000000000000000000636F6e736F6c652e6c6f67;\n\n    function _sendLogPayloadImplementation(bytes memory payload) internal view {\n        address consoleAddress = CONSOLE_ADDRESS;\n        /// @solidity memory-safe-assembly\n        assembly {\n            pop(\n                staticcall(\n                    gas(),\n                    consoleAddress,\n                    add(payload, 32),\n                    mload(payload),\n                    0,\n                    0\n                )\n            )\n        }\n    }\n\n    function _castToPure(\n      function(bytes memory) internal view fnIn\n    ) internal pure returns (function(bytes memory) pure fnOut) {\n        assembly {\n            fnOut := fnIn\n        }\n    }\n\n    function _sendLogPayload(bytes memory payload) internal pure {\n        _castToPure(_sendLogPayloadImplementation)(payload);\n    }\n\n    function log() internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log()\"));\n    }\n\n    function logInt(int256 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(int256)\", p0));\n    }\n\n    function logUint(uint256 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256)\", p0));\n    }\n\n    function logString(string memory p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string)\", p0));\n    }\n\n    function logBool(bool p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool)\", p0));\n    }\n\n    function logAddress(address p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address)\", p0));\n    }\n\n    function logBytes(bytes memory p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes)\", p0));\n    }\n\n    function logBytes1(bytes1 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes1)\", p0));\n    }\n\n    function logBytes2(bytes2 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes2)\", p0));\n    }\n\n    function logBytes3(bytes3 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes3)\", p0));\n    }\n\n    function logBytes4(bytes4 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes4)\", p0));\n    }\n\n    function logBytes5(bytes5 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes5)\", p0));\n    }\n\n    function logBytes6(bytes6 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes6)\", p0));\n    }\n\n    function logBytes7(bytes7 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes7)\", p0));\n    }\n\n    function logBytes8(bytes8 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes8)\", p0));\n    }\n\n    function logBytes9(bytes9 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes9)\", p0));\n    }\n\n    function logBytes10(bytes10 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes10)\", p0));\n    }\n\n    function logBytes11(bytes11 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes11)\", p0));\n    }\n\n    function logBytes12(bytes12 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes12)\", p0));\n    }\n\n    function logBytes13(bytes13 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes13)\", p0));\n    }\n\n    function logBytes14(bytes14 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes14)\", p0));\n    }\n\n    function logBytes15(bytes15 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes15)\", p0));\n    }\n\n    function logBytes16(bytes16 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes16)\", p0));\n    }\n\n    function logBytes17(bytes17 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes17)\", p0));\n    }\n\n    function logBytes18(bytes18 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes18)\", p0));\n    }\n\n    function logBytes19(bytes19 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes19)\", p0));\n    }\n\n    function logBytes20(bytes20 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes20)\", p0));\n    }\n\n    function logBytes21(bytes21 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes21)\", p0));\n    }\n\n    function logBytes22(bytes22 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes22)\", p0));\n    }\n\n    function logBytes23(bytes23 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes23)\", p0));\n    }\n\n    function logBytes24(bytes24 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes24)\", p0));\n    }\n\n    function logBytes25(bytes25 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes25)\", p0));\n    }\n\n    function logBytes26(bytes26 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes26)\", p0));\n    }\n\n    function logBytes27(bytes27 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes27)\", p0));\n    }\n\n    function logBytes28(bytes28 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes28)\", p0));\n    }\n\n    function logBytes29(bytes29 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes29)\", p0));\n    }\n\n    function logBytes30(bytes30 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes30)\", p0));\n    }\n\n    function logBytes31(bytes31 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes31)\", p0));\n    }\n\n    function logBytes32(bytes32 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bytes32)\", p0));\n    }\n\n    function log(uint256 p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256)\", p0));\n    }\n\n    function log(string memory p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string)\", p0));\n    }\n\n    function log(bool p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool)\", p0));\n    }\n\n    function log(address p0) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address)\", p0));\n    }\n\n    function log(uint256 p0, uint256 p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256)\", p0, p1));\n    }\n\n    function log(uint256 p0, string memory p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string)\", p0, p1));\n    }\n\n    function log(uint256 p0, bool p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool)\", p0, p1));\n    }\n\n    function log(uint256 p0, address p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address)\", p0, p1));\n    }\n\n    function log(string memory p0, uint256 p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256)\", p0, p1));\n    }\n\n    function log(string memory p0, string memory p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string)\", p0, p1));\n    }\n\n    function log(string memory p0, bool p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool)\", p0, p1));\n    }\n\n    function log(string memory p0, address p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address)\", p0, p1));\n    }\n\n    function log(bool p0, uint256 p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256)\", p0, p1));\n    }\n\n    function log(bool p0, string memory p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string)\", p0, p1));\n    }\n\n    function log(bool p0, bool p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool)\", p0, p1));\n    }\n\n    function log(bool p0, address p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address)\", p0, p1));\n    }\n\n    function log(address p0, uint256 p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256)\", p0, p1));\n    }\n\n    function log(address p0, string memory p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string)\", p0, p1));\n    }\n\n    function log(address p0, bool p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool)\", p0, p1));\n    }\n\n    function log(address p0, address p1) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address)\", p0, p1));\n    }\n\n    function log(uint256 p0, uint256 p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,uint256)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, uint256 p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,string)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, uint256 p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,bool)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, uint256 p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,address)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, string memory p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,uint256)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, string memory p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,string)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, string memory p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,bool)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, string memory p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,address)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, bool p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,uint256)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, bool p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,string)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, bool p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,bool)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, bool p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,address)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, address p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,uint256)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, address p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,string)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, address p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,bool)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, address p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,address)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, uint256 p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,uint256)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, uint256 p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,string)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, uint256 p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,bool)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, uint256 p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,address)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, string memory p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,uint256)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, string memory p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,string)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, string memory p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,bool)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, string memory p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,address)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, bool p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,uint256)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, bool p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,string)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, bool p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,bool)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, bool p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,address)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, address p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,uint256)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, address p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,string)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, address p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,bool)\", p0, p1, p2));\n    }\n\n    function log(string memory p0, address p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,address)\", p0, p1, p2));\n    }\n\n    function log(bool p0, uint256 p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,uint256)\", p0, p1, p2));\n    }\n\n    function log(bool p0, uint256 p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,string)\", p0, p1, p2));\n    }\n\n    function log(bool p0, uint256 p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,bool)\", p0, p1, p2));\n    }\n\n    function log(bool p0, uint256 p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,address)\", p0, p1, p2));\n    }\n\n    function log(bool p0, string memory p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,uint256)\", p0, p1, p2));\n    }\n\n    function log(bool p0, string memory p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,string)\", p0, p1, p2));\n    }\n\n    function log(bool p0, string memory p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,bool)\", p0, p1, p2));\n    }\n\n    function log(bool p0, string memory p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,address)\", p0, p1, p2));\n    }\n\n    function log(bool p0, bool p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,uint256)\", p0, p1, p2));\n    }\n\n    function log(bool p0, bool p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,string)\", p0, p1, p2));\n    }\n\n    function log(bool p0, bool p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,bool)\", p0, p1, p2));\n    }\n\n    function log(bool p0, bool p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,address)\", p0, p1, p2));\n    }\n\n    function log(bool p0, address p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,uint256)\", p0, p1, p2));\n    }\n\n    function log(bool p0, address p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,string)\", p0, p1, p2));\n    }\n\n    function log(bool p0, address p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,bool)\", p0, p1, p2));\n    }\n\n    function log(bool p0, address p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,address)\", p0, p1, p2));\n    }\n\n    function log(address p0, uint256 p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,uint256)\", p0, p1, p2));\n    }\n\n    function log(address p0, uint256 p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,string)\", p0, p1, p2));\n    }\n\n    function log(address p0, uint256 p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,bool)\", p0, p1, p2));\n    }\n\n    function log(address p0, uint256 p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,address)\", p0, p1, p2));\n    }\n\n    function log(address p0, string memory p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,uint256)\", p0, p1, p2));\n    }\n\n    function log(address p0, string memory p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,string)\", p0, p1, p2));\n    }\n\n    function log(address p0, string memory p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,bool)\", p0, p1, p2));\n    }\n\n    function log(address p0, string memory p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,address)\", p0, p1, p2));\n    }\n\n    function log(address p0, bool p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,uint256)\", p0, p1, p2));\n    }\n\n    function log(address p0, bool p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,string)\", p0, p1, p2));\n    }\n\n    function log(address p0, bool p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,bool)\", p0, p1, p2));\n    }\n\n    function log(address p0, bool p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,address)\", p0, p1, p2));\n    }\n\n    function log(address p0, address p1, uint256 p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,uint256)\", p0, p1, p2));\n    }\n\n    function log(address p0, address p1, string memory p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,string)\", p0, p1, p2));\n    }\n\n    function log(address p0, address p1, bool p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,bool)\", p0, p1, p2));\n    }\n\n    function log(address p0, address p1, address p2) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,address)\", p0, p1, p2));\n    }\n\n    function log(uint256 p0, uint256 p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, uint256 p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,uint256,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, string memory p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,string,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, bool p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,bool,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(uint256 p0, address p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(uint256,address,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, uint256 p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,uint256,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, string memory p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,string,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, bool p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,bool,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(string memory p0, address p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(string,address,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, uint256 p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,uint256,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, string memory p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,string,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, bool p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,bool,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(bool p0, address p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(bool,address,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, uint256 p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,uint256,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, string memory p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,string,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, bool p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,bool,address,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, uint256 p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,uint256,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, uint256 p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,uint256,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, uint256 p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,uint256,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, uint256 p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,uint256,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, string memory p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,string,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, string memory p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,string,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, string memory p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,string,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, string memory p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,string,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, bool p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,bool,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, bool p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,bool,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, bool p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,bool,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, bool p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,bool,address)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, address p2, uint256 p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,address,uint256)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, address p2, string memory p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,address,string)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, address p2, bool p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,address,bool)\", p0, p1, p2, p3));\n    }\n\n    function log(address p0, address p1, address p2, address p3) internal pure {\n        _sendLogPayload(abi.encodeWithSignature(\"log(address,address,address,address)\", p0, p1, p2, p3));\n    }\n}\n"}},"matchId":"10995023","creationMatch":"match","runtimeMatch":"match","verifiedAt":"2025-12-19T21:03:22Z","match":"match","chainId":"1","address":"0xf459Ff5EC7d1F371CB34754BDA5FE5FCE2c9054d"}