{"sources":{"contracts/PythiaTokenStaking.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"./interfaces/ILiquidityDistributionManager.sol\";\nimport \"./base/AbstractRewards.sol\";\nimport \"./interfaces/IEscrow.sol\";\n\ncontract PythiaTokenStaking is Ownable, ReentrancyGuard, ERC20, AbstractRewards {\n using SafeERC20 for IERC20;\n\n IERC20 public depositToken;\n IERC20 public rewardToken;\n ILiquidityDistributionManager public distributor;\n address feeReceiver;\n uint256 public withdrawFee;\n uint256 constant base = 100;\n\n IEscrow public escrowPool;\n uint256 public escrowPortion; // how much is escrowed 1e18 == 100%\n\n struct Epoch {\n uint256 length; // in seconds\n uint256 end; // timestamp\n uint256 distributed; // amount\n }\n Epoch public epoch;\n\n event Deposited(uint256 amount, address depositor);\n event Withdrawn(address depositor, uint256 amount);\n event RewardsClaimed(address _user, uint256 _escrowedAmount, uint256 _nonEscrowedAmount);\n\n constructor(\n string memory poolName,\n string memory poolSymbol,\n address _distributor,\n uint256 _epochLength, \n address _escrowPool, \n uint256 _escrowPortion\n )\n ERC20(poolName, poolSymbol)\n AbstractRewards(balanceOf, totalSupply)\n Ownable(msg.sender)\n {\n distributor = ILiquidityDistributionManager(_distributor);\n epoch = Epoch({\n length: _epochLength,\n end: block.timestamp,\n distributed: 0\n });\n escrowPool = IEscrow(_escrowPool);\n escrowPortion = _escrowPortion;\n }\n\n function updateEcrowPool(address _escrow) external onlyOwner {\n require(_escrow != address(0), \"zero add\");\n escrowPool = IEscrow(_escrow);\n }\n\n function mint(address account, uint256 amount) internal {\n super._update(address(0), account, amount);\n adjustPoints(account, -int256(amount));\n }\n\n function burn(address account, uint256 amount) internal {\n super._update(account, address(0), amount);\n adjustPoints(account, int256(amount));\n }\n\n function stake(uint256 amount) external nonReentrant {\n require(amount > 0, \"Amount must be greater than 0\");\n\n depositToken.safeTransferFrom(_msgSender(), address(this), amount);\n\n // mints staked share\n mint(_msgSender(), amount);\n emit Deposited(amount, _msgSender());\n }\n\n function unstake() external nonReentrant {\n require(\n balanceOf(msg.sender) > 0,\n \"Deposit does not exist\"\n );\n uint256 amount = balanceOf(msg.sender);\n\n // Burn staked share\n burn(_msgSender(), amount);\n\n // withdraw fee\n uint256 fee = (amount * withdrawFee) / base;\n if(fee > 0) {\n depositToken.transfer(feeReceiver, fee);\n }\n uint256 userShare = amount - fee;\n // Return tokens\n depositToken.safeTransfer(_msgSender(), userShare);\n emit Withdrawn(_msgSender(), amount);\n }\n\n function setFeeReceiver(address _add) external onlyOwner() {\n require(_add != address(0), \"zero address\");\n feeReceiver = _add;\n }\n\n function setWithdrawFee(uint256 _fee) external onlyOwner {\n require(_fee <= 10, \"max 10% is allowed\");\n withdrawFee = _fee;\n }\n\n function distributeRewards() public nonReentrant {\n if (epoch.end <= block.timestamp) {\n uint256 timePassed = epoch.length + (block.timestamp - epoch.end);\n epoch.end = block.timestamp + epoch.length;\n\n uint256 amount = distributor.distributor(timePassed);\n if(amount > 0) {\n _distributeRewards(amount);\n epoch.distributed += amount;\n }\n }\n }\n\n function claimRewards() external {\n distributeRewards();\n uint256 rewardAmount = setupClaim(_msgSender());\n uint256 escrowedRewardAmount = rewardAmount * escrowPortion / 1e18;\n uint256 nonEscrowedRewardAmount = rewardAmount - escrowedRewardAmount;\n\n if(escrowedRewardAmount != 0 && address(escrowPool) != address(0)) {\n escrowPool.vestingLock(_msgSender(), escrowedRewardAmount);\n }\n\n // ignore dust\n if(nonEscrowedRewardAmount > 1) {\n rewardToken.safeTransfer(_msgSender(), nonEscrowedRewardAmount);\n }\n\n emit RewardsClaimed(_msgSender(), escrowedRewardAmount, nonEscrowedRewardAmount);\n }\n\n function addDepositRewardToken(address depositTokenAddress, address rewardTokenAddress) external onlyOwner {\n require(depositTokenAddress != address(0), \"Deposit token must be set\");\n require(rewardTokenAddress != address(0), \"reward token must be set\");\n\n depositToken = IERC20(depositTokenAddress);\n rewardToken = IERC20(rewardTokenAddress);\n\n if(rewardTokenAddress != address(0) && address(escrowPool) != address(0)) {\n IERC20(rewardTokenAddress).approve(address(escrowPool), type(uint256).max);\n }\n }\n\n function setEpochTime(uint256 _duration) external onlyOwner {\n require(_duration > 0, \"epoch cannot be zero\");\n\n epoch.length = _duration;\n }\n\n function changeDistributor(ILiquidityDistributionManager _add) external onlyOwner {\n require(address(_add) != address(0), \"zero address\");\n distributor = _add;\n }\n}\n"},"contracts/interfaces/IEscrow.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.15;\n\ninterface IEscrow {\n function vestingLock(\n address owner,\n uint256 amount\n ) external returns (uint256 id);\n}\n"},"contracts/base/AbstractRewards.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.20;\n\nimport \"../interfaces/IAbstractRewards.sol\";\nimport \"@openzeppelin/contracts/utils/math/SafeCast.sol\";\n\nabstract contract AbstractRewards is IAbstractRewards {\n using SafeCast for uint128;\n using SafeCast for uint256;\n using SafeCast for int256;\n\n uint128 public constant SCALING_FACTOR = type(uint128).max;\n\n function(address) view returns (uint256) private immutable getAccountBalance;\n function() view returns (uint256) private immutable getTotalBalance;\n\n uint256 public shareBasedPoints;\n mapping(address => int256) public pointsCorrection;\n mapping(address => uint256) public withdrawnRewards;\n\n constructor(\n function(address) internal view returns (uint256) getAccountBalance_,\n function() internal view returns (uint256) getTotalBalance_\n ) {\n getAccountBalance = getAccountBalance_;\n getTotalBalance = getTotalBalance_;\n }\n\n function getRedeemablePayouts(address _account) public view override returns (uint256) {\n return getCumulativePayouts(_account) - withdrawnRewards[_account];\n }\n\n function getRedeemedPayouts(address _account) public view override returns (uint256) {\n return withdrawnRewards[_account];\n }\n\n function getCumulativePayouts(address _account) public view override returns (uint256) {\n return ((shareBasedPoints * getAccountBalance(_account)).toInt256() + pointsCorrection[_account]).toUint256() / SCALING_FACTOR;\n }\n\n function _distributeRewards(uint256 _amount) internal {\n uint256 totalShares = getTotalBalance();\n require(totalShares > 0, \"AbstractRewards: total share supply is zero\");\n\n if (_amount > 0) {\n shareBasedPoints = shareBasedPoints + (_amount * SCALING_FACTOR / totalShares);\n emit RewardsDistributed(msg.sender, _amount);\n }\n }\n\n function setupClaim(address _account) internal returns (uint256) {\n uint256 redeemableShare = getRedeemablePayouts(_account);\n if (redeemableShare > 0) {\n withdrawnRewards[_account] = withdrawnRewards[_account] + redeemableShare;\n emit RewardsWithdrawn(_account, redeemableShare);\n }\n return redeemableShare;\n }\n\n function adjustPointsForTransfer(address _from, address _to, uint256 _shares) internal {\n int256 magnitudeCorrection = (shareBasedPoints * _shares).toInt256();\n pointsCorrection[_from] = pointsCorrection[_from] + magnitudeCorrection;\n pointsCorrection[_to] = pointsCorrection[_to] - magnitudeCorrection;\n }\n\n function adjustPoints(address _account, int256 _shares) internal {\n pointsCorrection[_account] = pointsCorrection[_account] + (_shares * int256(shareBasedPoints));\n }\n}"},"@openzeppelin/contracts/utils/Address.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n /**\n * @dev The ETH balance of the account is not enough to perform the operation.\n */\n error AddressInsufficientBalance(address account);\n\n /**\n * @dev There's no code at `target` (it is not a contract).\n */\n error AddressEmptyCode(address target);\n\n /**\n * @dev A call to an address target failed. The target may have reverted.\n */\n error FailedInnerCall();\n\n /**\n * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n *\n * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n *\n * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n *\n * IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n */\n function sendValue(address payable recipient, uint256 amount) internal {\n if (address(this).balance < amount) {\n revert AddressInsufficientBalance(address(this));\n }\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n if (!success) {\n revert FailedInnerCall();\n }\n }\n\n /**\n * @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n *\n * If `target` reverts with a revert reason or custom error, it is bubbled\n * up by this function (like regular Solidity function calls). However, if\n * the call reverted with no returned reason, this function reverts with a\n * {FailedInnerCall} error.\n *\n * Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n *\n * Requirements:\n *\n * - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n */\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n *\n * Requirements:\n *\n * - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n */\n function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n if (address(this).balance < value) {\n revert AddressInsufficientBalance(address(this));\n }\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResultFromTarget(target, success, returndata);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n */\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResultFromTarget(target, success, returndata);\n }\n\n /**\n * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n */\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResultFromTarget(target, success, returndata);\n }\n\n /**\n * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an\n * unsuccessful call.\n */\n function verifyCallResultFromTarget(\n address target,\n bool success,\n bytes memory returndata\n ) internal view returns (bytes memory) {\n if (!success) {\n _revert(returndata);\n } else {\n // only check if target is a contract if the call was successful and the return data is empty\n // otherwise we already know that it was a contract\n if (returndata.length == 0 && target.code.length == 0) {\n revert AddressEmptyCode(target);\n }\n return returndata;\n }\n }\n\n /**\n * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n * revert reason or with a default {FailedInnerCall} error.\n */\n function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n if (!success) {\n _revert(returndata);\n } else {\n return returndata;\n }\n }\n\n /**\n * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.\n */\n function _revert(bytes memory returndata) private pure {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n /// @solidity memory-safe-assembly\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert FailedInnerCall();\n }\n }\n}\n"},"@openzeppelin/contracts/utils/Context.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n\n function _contextSuffixLength() internal view virtual returns (uint256) {\n return 0;\n }\n}\n"},"contracts/interfaces/IAbstractRewards.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.19;\n\ninterface IAbstractRewards {\n function getRedeemablePayouts(address _account) external view returns (uint256);\n function getRedeemedPayouts(address _account) external view returns (uint256);\n function getCumulativePayouts(address _account) external view returns (uint256);\n\n event RewardsDistributed(address indexed recipient, uint256 amount);\n event RewardsWithdrawn(address indexed recipient, uint256 amount);\n}\n"},"@openzeppelin/contracts/access/Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n /**\n * @dev The caller account is not authorized to perform an operation.\n */\n error OwnableUnauthorizedAccount(address account);\n\n /**\n * @dev The owner is not a valid owner account. (eg. `address(0)`)\n */\n error OwnableInvalidOwner(address owner);\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n */\n constructor(address initialOwner) {\n if (initialOwner == address(0)) {\n revert OwnableInvalidOwner(address(0));\n }\n _transferOwnership(initialOwner);\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n if (owner() != _msgSender()) {\n revert OwnableUnauthorizedAccount(_msgSender());\n }\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby disabling any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n if (newOwner == address(0)) {\n revert OwnableInvalidOwner(address(0));\n }\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n"},"@openzeppelin/contracts/token/ERC20/ERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC20Metadata} from \"./extensions/IERC20Metadata.sol\";\nimport {Context} from \"../../utils/Context.sol\";\nimport {IERC20Errors} from \"../../interfaces/draft-IERC6093.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC20\n * applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n */\nabstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {\n mapping(address account => uint256) private _balances;\n\n mapping(address account => mapping(address spender => uint256)) private _allowances;\n\n uint256 private _totalSupply;\n\n string private _name;\n string private _symbol;\n\n /**\n * @dev Sets the values for {name} and {symbol}.\n *\n * All two of these values are immutable: they can only be set once during\n * construction.\n */\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev Returns the name of the token.\n */\n function name() public view virtual returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n */\n function symbol() public view virtual returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n *\n * Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the default value returned by this function, unless\n * it's overridden.\n *\n * NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n */\n function decimals() public view virtual returns (uint8) {\n return 18;\n }\n\n /**\n * @dev See {IERC20-totalSupply}.\n */\n function totalSupply() public view virtual returns (uint256) {\n return _totalSupply;\n }\n\n /**\n * @dev See {IERC20-balanceOf}.\n */\n function balanceOf(address account) public view virtual returns (uint256) {\n return _balances[account];\n }\n\n /**\n * @dev See {IERC20-transfer}.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - the caller must have a balance of at least `value`.\n */\n function transfer(address to, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _transfer(owner, to, value);\n return true;\n }\n\n /**\n * @dev See {IERC20-allowance}.\n */\n function allowance(address owner, address spender) public view virtual returns (uint256) {\n return _allowances[owner][spender];\n }\n\n /**\n * @dev See {IERC20-approve}.\n *\n * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n * `transferFrom`. This is semantically equivalent to an infinite approval.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function approve(address spender, uint256 value) public virtual returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, value);\n return true;\n }\n\n /**\n * @dev See {IERC20-transferFrom}.\n *\n * Emits an {Approval} event indicating the updated allowance. This is not\n * required by the EIP. See the note at the beginning of {ERC20}.\n *\n * NOTE: Does not update the allowance if the current allowance\n * is the maximum `uint256`.\n *\n * Requirements:\n *\n * - `from` and `to` cannot be the zero address.\n * - `from` must have a balance of at least `value`.\n * - the caller must have allowance for ``from``'s tokens of at least\n * `value`.\n */\n function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n address spender = _msgSender();\n _spendAllowance(from, spender, value);\n _transfer(from, to, value);\n return true;\n }\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to`.\n *\n * This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n *\n * Emits a {Transfer} event.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _transfer(address from, address to, uint256 value) internal {\n if (from == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n if (to == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(from, to, value);\n }\n\n /**\n * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n * this function.\n *\n * Emits a {Transfer} event.\n */\n function _update(address from, address to, uint256 value) internal virtual {\n if (from == address(0)) {\n // Overflow check required: The rest of the code assumes that totalSupply never overflows\n _totalSupply += value;\n } else {\n uint256 fromBalance = _balances[from];\n if (fromBalance < value) {\n revert ERC20InsufficientBalance(from, fromBalance, value);\n }\n unchecked {\n // Overflow not possible: value <= fromBalance <= totalSupply.\n _balances[from] = fromBalance - value;\n }\n }\n\n if (to == address(0)) {\n unchecked {\n // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n _totalSupply -= value;\n }\n } else {\n unchecked {\n // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n _balances[to] += value;\n }\n }\n\n emit Transfer(from, to, value);\n }\n\n /**\n * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n * Relies on the `_update` mechanism\n *\n * Emits a {Transfer} event with `from` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead.\n */\n function _mint(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidReceiver(address(0));\n }\n _update(address(0), account, value);\n }\n\n /**\n * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n * Relies on the `_update` mechanism.\n *\n * Emits a {Transfer} event with `to` set to the zero address.\n *\n * NOTE: This function is not virtual, {_update} should be overridden instead\n */\n function _burn(address account, uint256 value) internal {\n if (account == address(0)) {\n revert ERC20InvalidSender(address(0));\n }\n _update(account, address(0), value);\n }\n\n /**\n * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.\n *\n * This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n *\n * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n */\n function _approve(address owner, address spender, uint256 value) internal {\n _approve(owner, spender, value, true);\n }\n\n /**\n * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n *\n * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n * `Approval` event during `transferFrom` operations.\n *\n * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n * true using the following override:\n * ```\n * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n * super._approve(owner, spender, value, true);\n * }\n * ```\n *\n * Requirements are the same as {_approve}.\n */\n function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n if (owner == address(0)) {\n revert ERC20InvalidApprover(address(0));\n }\n if (spender == address(0)) {\n revert ERC20InvalidSpender(address(0));\n }\n _allowances[owner][spender] = value;\n if (emitEvent) {\n emit Approval(owner, spender, value);\n }\n }\n\n /**\n * @dev Updates `owner` s allowance for `spender` based on spent `value`.\n *\n * Does not update the allowance value in case of infinite allowance.\n * Revert if not enough allowance is available.\n *\n * Does not emit an {Approval} event.\n */\n function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n uint256 currentAllowance = allowance(owner, spender);\n if (currentAllowance != type(uint256).max) {\n if (currentAllowance < value) {\n revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n }\n unchecked {\n _approve(owner, spender, currentAllowance - value, false);\n }\n }\n }\n}\n"},"@openzeppelin/contracts/token/ERC20/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the value of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the value of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 value) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n * caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 value) external returns (bool);\n\n /**\n * @dev Moves a `value` amount of tokens from `from` to `to` using the\n * allowance mechanism. `value` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},"@openzeppelin/contracts/utils/math/SafeCast.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n /**\n * @dev Value doesn't fit in an uint of `bits` size.\n */\n error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n /**\n * @dev An int value doesn't fit in an uint of `bits` size.\n */\n error SafeCastOverflowedIntToUint(int256 value);\n\n /**\n * @dev Value doesn't fit in an int of `bits` size.\n */\n error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n /**\n * @dev An uint value doesn't fit in an int of `bits` size.\n */\n error SafeCastOverflowedUintToInt(uint256 value);\n\n /**\n * @dev Returns the downcasted uint248 from uint256, reverting on\n * overflow (when the input is greater than largest uint248).\n *\n * Counterpart to Solidity's `uint248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n */\n function toUint248(uint256 value) internal pure returns (uint248) {\n if (value > type(uint248).max) {\n revert SafeCastOverflowedUintDowncast(248, value);\n }\n return uint248(value);\n }\n\n /**\n * @dev Returns the downcasted uint240 from uint256, reverting on\n * overflow (when the input is greater than largest uint240).\n *\n * Counterpart to Solidity's `uint240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n */\n function toUint240(uint256 value) internal pure returns (uint240) {\n if (value > type(uint240).max) {\n revert SafeCastOverflowedUintDowncast(240, value);\n }\n return uint240(value);\n }\n\n /**\n * @dev Returns the downcasted uint232 from uint256, reverting on\n * overflow (when the input is greater than largest uint232).\n *\n * Counterpart to Solidity's `uint232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n */\n function toUint232(uint256 value) internal pure returns (uint232) {\n if (value > type(uint232).max) {\n revert SafeCastOverflowedUintDowncast(232, value);\n }\n return uint232(value);\n }\n\n /**\n * @dev Returns the downcasted uint224 from uint256, reverting on\n * overflow (when the input is greater than largest uint224).\n *\n * Counterpart to Solidity's `uint224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n */\n function toUint224(uint256 value) internal pure returns (uint224) {\n if (value > type(uint224).max) {\n revert SafeCastOverflowedUintDowncast(224, value);\n }\n return uint224(value);\n }\n\n /**\n * @dev Returns the downcasted uint216 from uint256, reverting on\n * overflow (when the input is greater than largest uint216).\n *\n * Counterpart to Solidity's `uint216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n */\n function toUint216(uint256 value) internal pure returns (uint216) {\n if (value > type(uint216).max) {\n revert SafeCastOverflowedUintDowncast(216, value);\n }\n return uint216(value);\n }\n\n /**\n * @dev Returns the downcasted uint208 from uint256, reverting on\n * overflow (when the input is greater than largest uint208).\n *\n * Counterpart to Solidity's `uint208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n */\n function toUint208(uint256 value) internal pure returns (uint208) {\n if (value > type(uint208).max) {\n revert SafeCastOverflowedUintDowncast(208, value);\n }\n return uint208(value);\n }\n\n /**\n * @dev Returns the downcasted uint200 from uint256, reverting on\n * overflow (when the input is greater than largest uint200).\n *\n * Counterpart to Solidity's `uint200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n */\n function toUint200(uint256 value) internal pure returns (uint200) {\n if (value > type(uint200).max) {\n revert SafeCastOverflowedUintDowncast(200, value);\n }\n return uint200(value);\n }\n\n /**\n * @dev Returns the downcasted uint192 from uint256, reverting on\n * overflow (when the input is greater than largest uint192).\n *\n * Counterpart to Solidity's `uint192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n */\n function toUint192(uint256 value) internal pure returns (uint192) {\n if (value > type(uint192).max) {\n revert SafeCastOverflowedUintDowncast(192, value);\n }\n return uint192(value);\n }\n\n /**\n * @dev Returns the downcasted uint184 from uint256, reverting on\n * overflow (when the input is greater than largest uint184).\n *\n * Counterpart to Solidity's `uint184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n */\n function toUint184(uint256 value) internal pure returns (uint184) {\n if (value > type(uint184).max) {\n revert SafeCastOverflowedUintDowncast(184, value);\n }\n return uint184(value);\n }\n\n /**\n * @dev Returns the downcasted uint176 from uint256, reverting on\n * overflow (when the input is greater than largest uint176).\n *\n * Counterpart to Solidity's `uint176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n */\n function toUint176(uint256 value) internal pure returns (uint176) {\n if (value > type(uint176).max) {\n revert SafeCastOverflowedUintDowncast(176, value);\n }\n return uint176(value);\n }\n\n /**\n * @dev Returns the downcasted uint168 from uint256, reverting on\n * overflow (when the input is greater than largest uint168).\n *\n * Counterpart to Solidity's `uint168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n */\n function toUint168(uint256 value) internal pure returns (uint168) {\n if (value > type(uint168).max) {\n revert SafeCastOverflowedUintDowncast(168, value);\n }\n return uint168(value);\n }\n\n /**\n * @dev Returns the downcasted uint160 from uint256, reverting on\n * overflow (when the input is greater than largest uint160).\n *\n * Counterpart to Solidity's `uint160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n */\n function toUint160(uint256 value) internal pure returns (uint160) {\n if (value > type(uint160).max) {\n revert SafeCastOverflowedUintDowncast(160, value);\n }\n return uint160(value);\n }\n\n /**\n * @dev Returns the downcasted uint152 from uint256, reverting on\n * overflow (when the input is greater than largest uint152).\n *\n * Counterpart to Solidity's `uint152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n */\n function toUint152(uint256 value) internal pure returns (uint152) {\n if (value > type(uint152).max) {\n revert SafeCastOverflowedUintDowncast(152, value);\n }\n return uint152(value);\n }\n\n /**\n * @dev Returns the downcasted uint144 from uint256, reverting on\n * overflow (when the input is greater than largest uint144).\n *\n * Counterpart to Solidity's `uint144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n */\n function toUint144(uint256 value) internal pure returns (uint144) {\n if (value > type(uint144).max) {\n revert SafeCastOverflowedUintDowncast(144, value);\n }\n return uint144(value);\n }\n\n /**\n * @dev Returns the downcasted uint136 from uint256, reverting on\n * overflow (when the input is greater than largest uint136).\n *\n * Counterpart to Solidity's `uint136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n */\n function toUint136(uint256 value) internal pure returns (uint136) {\n if (value > type(uint136).max) {\n revert SafeCastOverflowedUintDowncast(136, value);\n }\n return uint136(value);\n }\n\n /**\n * @dev Returns the downcasted uint128 from uint256, reverting on\n * overflow (when the input is greater than largest uint128).\n *\n * Counterpart to Solidity's `uint128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n */\n function toUint128(uint256 value) internal pure returns (uint128) {\n if (value > type(uint128).max) {\n revert SafeCastOverflowedUintDowncast(128, value);\n }\n return uint128(value);\n }\n\n /**\n * @dev Returns the downcasted uint120 from uint256, reverting on\n * overflow (when the input is greater than largest uint120).\n *\n * Counterpart to Solidity's `uint120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n */\n function toUint120(uint256 value) internal pure returns (uint120) {\n if (value > type(uint120).max) {\n revert SafeCastOverflowedUintDowncast(120, value);\n }\n return uint120(value);\n }\n\n /**\n * @dev Returns the downcasted uint112 from uint256, reverting on\n * overflow (when the input is greater than largest uint112).\n *\n * Counterpart to Solidity's `uint112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n */\n function toUint112(uint256 value) internal pure returns (uint112) {\n if (value > type(uint112).max) {\n revert SafeCastOverflowedUintDowncast(112, value);\n }\n return uint112(value);\n }\n\n /**\n * @dev Returns the downcasted uint104 from uint256, reverting on\n * overflow (when the input is greater than largest uint104).\n *\n * Counterpart to Solidity's `uint104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n */\n function toUint104(uint256 value) internal pure returns (uint104) {\n if (value > type(uint104).max) {\n revert SafeCastOverflowedUintDowncast(104, value);\n }\n return uint104(value);\n }\n\n /**\n * @dev Returns the downcasted uint96 from uint256, reverting on\n * overflow (when the input is greater than largest uint96).\n *\n * Counterpart to Solidity's `uint96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n */\n function toUint96(uint256 value) internal pure returns (uint96) {\n if (value > type(uint96).max) {\n revert SafeCastOverflowedUintDowncast(96, value);\n }\n return uint96(value);\n }\n\n /**\n * @dev Returns the downcasted uint88 from uint256, reverting on\n * overflow (when the input is greater than largest uint88).\n *\n * Counterpart to Solidity's `uint88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n */\n function toUint88(uint256 value) internal pure returns (uint88) {\n if (value > type(uint88).max) {\n revert SafeCastOverflowedUintDowncast(88, value);\n }\n return uint88(value);\n }\n\n /**\n * @dev Returns the downcasted uint80 from uint256, reverting on\n * overflow (when the input is greater than largest uint80).\n *\n * Counterpart to Solidity's `uint80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n */\n function toUint80(uint256 value) internal pure returns (uint80) {\n if (value > type(uint80).max) {\n revert SafeCastOverflowedUintDowncast(80, value);\n }\n return uint80(value);\n }\n\n /**\n * @dev Returns the downcasted uint72 from uint256, reverting on\n * overflow (when the input is greater than largest uint72).\n *\n * Counterpart to Solidity's `uint72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n */\n function toUint72(uint256 value) internal pure returns (uint72) {\n if (value > type(uint72).max) {\n revert SafeCastOverflowedUintDowncast(72, value);\n }\n return uint72(value);\n }\n\n /**\n * @dev Returns the downcasted uint64 from uint256, reverting on\n * overflow (when the input is greater than largest uint64).\n *\n * Counterpart to Solidity's `uint64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n */\n function toUint64(uint256 value) internal pure returns (uint64) {\n if (value > type(uint64).max) {\n revert SafeCastOverflowedUintDowncast(64, value);\n }\n return uint64(value);\n }\n\n /**\n * @dev Returns the downcasted uint56 from uint256, reverting on\n * overflow (when the input is greater than largest uint56).\n *\n * Counterpart to Solidity's `uint56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n */\n function toUint56(uint256 value) internal pure returns (uint56) {\n if (value > type(uint56).max) {\n revert SafeCastOverflowedUintDowncast(56, value);\n }\n return uint56(value);\n }\n\n /**\n * @dev Returns the downcasted uint48 from uint256, reverting on\n * overflow (when the input is greater than largest uint48).\n *\n * Counterpart to Solidity's `uint48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n */\n function toUint48(uint256 value) internal pure returns (uint48) {\n if (value > type(uint48).max) {\n revert SafeCastOverflowedUintDowncast(48, value);\n }\n return uint48(value);\n }\n\n /**\n * @dev Returns the downcasted uint40 from uint256, reverting on\n * overflow (when the input is greater than largest uint40).\n *\n * Counterpart to Solidity's `uint40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n */\n function toUint40(uint256 value) internal pure returns (uint40) {\n if (value > type(uint40).max) {\n revert SafeCastOverflowedUintDowncast(40, value);\n }\n return uint40(value);\n }\n\n /**\n * @dev Returns the downcasted uint32 from uint256, reverting on\n * overflow (when the input is greater than largest uint32).\n *\n * Counterpart to Solidity's `uint32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n */\n function toUint32(uint256 value) internal pure returns (uint32) {\n if (value > type(uint32).max) {\n revert SafeCastOverflowedUintDowncast(32, value);\n }\n return uint32(value);\n }\n\n /**\n * @dev Returns the downcasted uint24 from uint256, reverting on\n * overflow (when the input is greater than largest uint24).\n *\n * Counterpart to Solidity's `uint24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n */\n function toUint24(uint256 value) internal pure returns (uint24) {\n if (value > type(uint24).max) {\n revert SafeCastOverflowedUintDowncast(24, value);\n }\n return uint24(value);\n }\n\n /**\n * @dev Returns the downcasted uint16 from uint256, reverting on\n * overflow (when the input is greater than largest uint16).\n *\n * Counterpart to Solidity's `uint16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n */\n function toUint16(uint256 value) internal pure returns (uint16) {\n if (value > type(uint16).max) {\n revert SafeCastOverflowedUintDowncast(16, value);\n }\n return uint16(value);\n }\n\n /**\n * @dev Returns the downcasted uint8 from uint256, reverting on\n * overflow (when the input is greater than largest uint8).\n *\n * Counterpart to Solidity's `uint8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n */\n function toUint8(uint256 value) internal pure returns (uint8) {\n if (value > type(uint8).max) {\n revert SafeCastOverflowedUintDowncast(8, value);\n }\n return uint8(value);\n }\n\n /**\n * @dev Converts a signed int256 into an unsigned uint256.\n *\n * Requirements:\n *\n * - input must be greater than or equal to 0.\n */\n function toUint256(int256 value) internal pure returns (uint256) {\n if (value < 0) {\n revert SafeCastOverflowedIntToUint(value);\n }\n return uint256(value);\n }\n\n /**\n * @dev Returns the downcasted int248 from int256, reverting on\n * overflow (when the input is less than smallest int248 or\n * greater than largest int248).\n *\n * Counterpart to Solidity's `int248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n */\n function toInt248(int256 value) internal pure returns (int248 downcasted) {\n downcasted = int248(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(248, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int240 from int256, reverting on\n * overflow (when the input is less than smallest int240 or\n * greater than largest int240).\n *\n * Counterpart to Solidity's `int240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n */\n function toInt240(int256 value) internal pure returns (int240 downcasted) {\n downcasted = int240(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(240, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int232 from int256, reverting on\n * overflow (when the input is less than smallest int232 or\n * greater than largest int232).\n *\n * Counterpart to Solidity's `int232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n */\n function toInt232(int256 value) internal pure returns (int232 downcasted) {\n downcasted = int232(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(232, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int224 from int256, reverting on\n * overflow (when the input is less than smallest int224 or\n * greater than largest int224).\n *\n * Counterpart to Solidity's `int224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n */\n function toInt224(int256 value) internal pure returns (int224 downcasted) {\n downcasted = int224(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(224, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int216 from int256, reverting on\n * overflow (when the input is less than smallest int216 or\n * greater than largest int216).\n *\n * Counterpart to Solidity's `int216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n */\n function toInt216(int256 value) internal pure returns (int216 downcasted) {\n downcasted = int216(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(216, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int208 from int256, reverting on\n * overflow (when the input is less than smallest int208 or\n * greater than largest int208).\n *\n * Counterpart to Solidity's `int208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n */\n function toInt208(int256 value) internal pure returns (int208 downcasted) {\n downcasted = int208(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(208, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int200 from int256, reverting on\n * overflow (when the input is less than smallest int200 or\n * greater than largest int200).\n *\n * Counterpart to Solidity's `int200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n */\n function toInt200(int256 value) internal pure returns (int200 downcasted) {\n downcasted = int200(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(200, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int192 from int256, reverting on\n * overflow (when the input is less than smallest int192 or\n * greater than largest int192).\n *\n * Counterpart to Solidity's `int192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n */\n function toInt192(int256 value) internal pure returns (int192 downcasted) {\n downcasted = int192(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(192, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int184 from int256, reverting on\n * overflow (when the input is less than smallest int184 or\n * greater than largest int184).\n *\n * Counterpart to Solidity's `int184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n */\n function toInt184(int256 value) internal pure returns (int184 downcasted) {\n downcasted = int184(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(184, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int176 from int256, reverting on\n * overflow (when the input is less than smallest int176 or\n * greater than largest int176).\n *\n * Counterpart to Solidity's `int176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n */\n function toInt176(int256 value) internal pure returns (int176 downcasted) {\n downcasted = int176(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(176, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int168 from int256, reverting on\n * overflow (when the input is less than smallest int168 or\n * greater than largest int168).\n *\n * Counterpart to Solidity's `int168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n */\n function toInt168(int256 value) internal pure returns (int168 downcasted) {\n downcasted = int168(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(168, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int160 from int256, reverting on\n * overflow (when the input is less than smallest int160 or\n * greater than largest int160).\n *\n * Counterpart to Solidity's `int160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n */\n function toInt160(int256 value) internal pure returns (int160 downcasted) {\n downcasted = int160(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(160, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int152 from int256, reverting on\n * overflow (when the input is less than smallest int152 or\n * greater than largest int152).\n *\n * Counterpart to Solidity's `int152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n */\n function toInt152(int256 value) internal pure returns (int152 downcasted) {\n downcasted = int152(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(152, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int144 from int256, reverting on\n * overflow (when the input is less than smallest int144 or\n * greater than largest int144).\n *\n * Counterpart to Solidity's `int144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n */\n function toInt144(int256 value) internal pure returns (int144 downcasted) {\n downcasted = int144(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(144, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int136 from int256, reverting on\n * overflow (when the input is less than smallest int136 or\n * greater than largest int136).\n *\n * Counterpart to Solidity's `int136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n */\n function toInt136(int256 value) internal pure returns (int136 downcasted) {\n downcasted = int136(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(136, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int128 from int256, reverting on\n * overflow (when the input is less than smallest int128 or\n * greater than largest int128).\n *\n * Counterpart to Solidity's `int128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n */\n function toInt128(int256 value) internal pure returns (int128 downcasted) {\n downcasted = int128(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(128, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int120 from int256, reverting on\n * overflow (when the input is less than smallest int120 or\n * greater than largest int120).\n *\n * Counterpart to Solidity's `int120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n */\n function toInt120(int256 value) internal pure returns (int120 downcasted) {\n downcasted = int120(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(120, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int112 from int256, reverting on\n * overflow (when the input is less than smallest int112 or\n * greater than largest int112).\n *\n * Counterpart to Solidity's `int112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n */\n function toInt112(int256 value) internal pure returns (int112 downcasted) {\n downcasted = int112(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(112, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int104 from int256, reverting on\n * overflow (when the input is less than smallest int104 or\n * greater than largest int104).\n *\n * Counterpart to Solidity's `int104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n */\n function toInt104(int256 value) internal pure returns (int104 downcasted) {\n downcasted = int104(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(104, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int96 from int256, reverting on\n * overflow (when the input is less than smallest int96 or\n * greater than largest int96).\n *\n * Counterpart to Solidity's `int96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n */\n function toInt96(int256 value) internal pure returns (int96 downcasted) {\n downcasted = int96(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(96, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int88 from int256, reverting on\n * overflow (when the input is less than smallest int88 or\n * greater than largest int88).\n *\n * Counterpart to Solidity's `int88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n */\n function toInt88(int256 value) internal pure returns (int88 downcasted) {\n downcasted = int88(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(88, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int80 from int256, reverting on\n * overflow (when the input is less than smallest int80 or\n * greater than largest int80).\n *\n * Counterpart to Solidity's `int80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n */\n function toInt80(int256 value) internal pure returns (int80 downcasted) {\n downcasted = int80(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(80, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int72 from int256, reverting on\n * overflow (when the input is less than smallest int72 or\n * greater than largest int72).\n *\n * Counterpart to Solidity's `int72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n */\n function toInt72(int256 value) internal pure returns (int72 downcasted) {\n downcasted = int72(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(72, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int64 from int256, reverting on\n * overflow (when the input is less than smallest int64 or\n * greater than largest int64).\n *\n * Counterpart to Solidity's `int64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n */\n function toInt64(int256 value) internal pure returns (int64 downcasted) {\n downcasted = int64(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(64, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int56 from int256, reverting on\n * overflow (when the input is less than smallest int56 or\n * greater than largest int56).\n *\n * Counterpart to Solidity's `int56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n */\n function toInt56(int256 value) internal pure returns (int56 downcasted) {\n downcasted = int56(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(56, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int48 from int256, reverting on\n * overflow (when the input is less than smallest int48 or\n * greater than largest int48).\n *\n * Counterpart to Solidity's `int48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n */\n function toInt48(int256 value) internal pure returns (int48 downcasted) {\n downcasted = int48(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(48, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int40 from int256, reverting on\n * overflow (when the input is less than smallest int40 or\n * greater than largest int40).\n *\n * Counterpart to Solidity's `int40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n */\n function toInt40(int256 value) internal pure returns (int40 downcasted) {\n downcasted = int40(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(40, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int32 from int256, reverting on\n * overflow (when the input is less than smallest int32 or\n * greater than largest int32).\n *\n * Counterpart to Solidity's `int32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n */\n function toInt32(int256 value) internal pure returns (int32 downcasted) {\n downcasted = int32(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(32, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int24 from int256, reverting on\n * overflow (when the input is less than smallest int24 or\n * greater than largest int24).\n *\n * Counterpart to Solidity's `int24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n */\n function toInt24(int256 value) internal pure returns (int24 downcasted) {\n downcasted = int24(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(24, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int16 from int256, reverting on\n * overflow (when the input is less than smallest int16 or\n * greater than largest int16).\n *\n * Counterpart to Solidity's `int16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n */\n function toInt16(int256 value) internal pure returns (int16 downcasted) {\n downcasted = int16(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(16, value);\n }\n }\n\n /**\n * @dev Returns the downcasted int8 from int256, reverting on\n * overflow (when the input is less than smallest int8 or\n * greater than largest int8).\n *\n * Counterpart to Solidity's `int8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n */\n function toInt8(int256 value) internal pure returns (int8 downcasted) {\n downcasted = int8(value);\n if (downcasted != value) {\n revert SafeCastOverflowedIntDowncast(8, value);\n }\n }\n\n /**\n * @dev Converts an unsigned uint256 into a signed int256.\n *\n * Requirements:\n *\n * - input must be less than or equal to maxInt256.\n */\n function toInt256(uint256 value) internal pure returns (int256) {\n // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n if (value > uint256(type(int256).max)) {\n revert SafeCastOverflowedUintToInt(value);\n }\n return int256(value);\n }\n}\n"},"@openzeppelin/contracts/utils/ReentrancyGuard.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n */\nabstract contract ReentrancyGuard {\n // Booleans are more expensive than uint256 or any type that takes up a full\n // word because each write operation emits an extra SLOAD to first read the\n // slot's contents, replace the bits taken up by the boolean, and then write\n // back. This is the compiler's defense against contract upgrades and\n // pointer aliasing, and it cannot be disabled.\n\n // The values being non-zero value makes deployment a bit more expensive,\n // but in exchange the refund on every call to nonReentrant will be lower in\n // amount. Since refunds are capped to a percentage of the total\n // transaction's gas, it is best to keep them low in cases like this one, to\n // increase the likelihood of the full refund coming into effect.\n uint256 private constant NOT_ENTERED = 1;\n uint256 private constant ENTERED = 2;\n\n uint256 private _status;\n\n /**\n * @dev Unauthorized reentrant call.\n */\n error ReentrancyGuardReentrantCall();\n\n constructor() {\n _status = NOT_ENTERED;\n }\n\n /**\n * @dev Prevents a contract from calling itself, directly or indirectly.\n * Calling a `nonReentrant` function from another `nonReentrant`\n * function is not supported. It is possible to prevent this from happening\n * by making the `nonReentrant` function external, and making it call a\n * `private` function that does the actual work.\n */\n modifier nonReentrant() {\n _nonReentrantBefore();\n _;\n _nonReentrantAfter();\n }\n\n function _nonReentrantBefore() private {\n // On the first call to nonReentrant, _status will be NOT_ENTERED\n if (_status == ENTERED) {\n revert ReentrancyGuardReentrantCall();\n }\n\n // Any calls to nonReentrant after this point will fail\n _status = ENTERED;\n }\n\n function _nonReentrantAfter() private {\n // By storing the original value once again, a refund is triggered (see\n // https://eips.ethereum.org/EIPS/eip-2200)\n _status = NOT_ENTERED;\n }\n\n /**\n * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n * `nonReentrant` function in the call stack.\n */\n function _reentrancyGuardEntered() internal view returns (bool) {\n return _status == ENTERED;\n }\n}\n"},"@openzeppelin/contracts/interfaces/draft-IERC6093.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard ERC20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.\n */\ninterface IERC20Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC20InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC20InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n * @param allowance Amount of tokens a `spender` is allowed to operate with.\n * @param needed Minimum amount required to perform a transfer.\n */\n error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC20InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n * @param spender Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.\n */\ninterface IERC721Errors {\n /**\n * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.\n * Used in balance queries.\n * @param owner Address of the current owner of a token.\n */\n error ERC721InvalidOwner(address owner);\n\n /**\n * @dev Indicates a `tokenId` whose `owner` is the zero address.\n * @param tokenId Identifier number of a token.\n */\n error ERC721NonexistentToken(uint256 tokenId);\n\n /**\n * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param tokenId Identifier number of a token.\n * @param owner Address of the current owner of a token.\n */\n error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC721InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC721InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param tokenId Identifier number of a token.\n */\n error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC721InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.\n */\ninterface IERC1155Errors {\n /**\n * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n * @param balance Current balance for the interacting account.\n * @param needed Minimum amount required to perform a transfer.\n * @param tokenId Identifier number of a token.\n */\n error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n /**\n * @dev Indicates a failure with the token `sender`. Used in transfers.\n * @param sender Address whose tokens are being transferred.\n */\n error ERC1155InvalidSender(address sender);\n\n /**\n * @dev Indicates a failure with the token `receiver`. Used in transfers.\n * @param receiver Address to which tokens are being transferred.\n */\n error ERC1155InvalidReceiver(address receiver);\n\n /**\n * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n * @param owner Address of the current owner of a token.\n */\n error ERC1155MissingApprovalForAll(address operator, address owner);\n\n /**\n * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n * @param approver Address initiating an approval operation.\n */\n error ERC1155InvalidApprover(address approver);\n\n /**\n * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n * @param operator Address that may be allowed to operate on tokens without being their owner.\n */\n error ERC1155InvalidOperator(address operator);\n\n /**\n * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n * Used in batch transfers.\n * @param idsLength Length of the array of token identifiers\n * @param valuesLength Length of the array of token amounts\n */\n error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"},"contracts/interfaces/ILiquidityDistributionManager.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.19;\n\ninterface ILiquidityDistributionManager {\n function distributor(uint256 _duration) external returns (uint256);\n}\n"},"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC20Permit} from \"../extensions/IERC20Permit.sol\";\nimport {Address} from \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n using Address for address;\n\n /**\n * @dev An operation with an ERC20 token failed.\n */\n error SafeERC20FailedOperation(address token);\n\n /**\n * @dev Indicates a failed `decreaseAllowance` request.\n */\n error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n /**\n * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n * non-reverting calls are assumed to be successful.\n */\n function safeTransfer(IERC20 token, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n }\n\n /**\n * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n */\n function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n }\n\n /**\n * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n * non-reverting calls are assumed to be successful.\n */\n function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n uint256 oldAllowance = token.allowance(address(this), spender);\n forceApprove(token, spender, oldAllowance + value);\n }\n\n /**\n * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n * value, non-reverting calls are assumed to be successful.\n */\n function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n unchecked {\n uint256 currentAllowance = token.allowance(address(this), spender);\n if (currentAllowance < requestedDecrease) {\n revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n }\n forceApprove(token, spender, currentAllowance - requestedDecrease);\n }\n }\n\n /**\n * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n * to be set to zero before setting it to a non-zero value, such as USDT.\n */\n function forceApprove(IERC20 token, address spender, uint256 value) internal {\n bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n if (!_callOptionalReturnBool(token, approvalCall)) {\n _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n _callOptionalReturn(token, approvalCall);\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data);\n if (returndata.length != 0 && !abi.decode(returndata, (bool))) {\n revert SafeERC20FailedOperation(address(token));\n }\n }\n\n /**\n * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n *\n * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.\n */\n function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false\n // and not revert is the subcall reverts.\n\n (bool success, bytes memory returndata) = address(token).call(data);\n return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;\n }\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n * try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n * doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n * token.safeTransferFrom(msg.sender, address(this), value);\n * ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n /**\n * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n * given ``owner``'s signed approval.\n *\n * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n * ordering also apply here.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `deadline` must be a timestamp in the future.\n * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n * over the EIP712-formatted function arguments.\n * - the signature must use ``owner``'s current nonce (see {nonces}).\n *\n * For more information on the signature format, see the\n * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n * section].\n *\n * CAUTION: See Security Considerations above.\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n\n /**\n * @dev Returns the current nonce for `owner`. This value must be\n * included whenever a signature is generated for {permit}.\n *\n * Every successful call to {permit} increases ``owner``'s nonce by one. This\n * prevents a signature from being used multiple times.\n */\n function nonces(address owner) external view returns (uint256);\n\n /**\n * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n /**\n * @dev Returns the name of the token.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the symbol of the token.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n"}},"matchId":"5260906","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2024-09-02T18:16:52Z","match":"exact_match","chainId":"1","address":"0xe2910b29252F97bb6F3Cc5E66BfA0551821C7461"}