{"sources":{"@openzeppelin/contracts/access/Ownable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * The initial owner is set to the address provided by the deployer. This can\n * later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n    address private _owner;\n\n    /**\n     * @dev The caller account is not authorized to perform an operation.\n     */\n    error OwnableUnauthorizedAccount(address account);\n\n    /**\n     * @dev The owner is not a valid owner account. (eg. `address(0)`)\n     */\n    error OwnableInvalidOwner(address owner);\n\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n    /**\n     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.\n     */\n    constructor(address initialOwner) {\n        if (initialOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(initialOwner);\n    }\n\n    /**\n     * @dev Throws if called by any account other than the owner.\n     */\n    modifier onlyOwner() {\n        _checkOwner();\n        _;\n    }\n\n    /**\n     * @dev Returns the address of the current owner.\n     */\n    function owner() public view virtual returns (address) {\n        return _owner;\n    }\n\n    /**\n     * @dev Throws if the sender is not the owner.\n     */\n    function _checkOwner() internal view virtual {\n        if (owner() != _msgSender()) {\n            revert OwnableUnauthorizedAccount(_msgSender());\n        }\n    }\n\n    /**\n     * @dev Leaves the contract without owner. It will not be possible to call\n     * `onlyOwner` functions. Can only be called by the current owner.\n     *\n     * NOTE: Renouncing ownership will leave the contract without an owner,\n     * thereby disabling any functionality that is only available to the owner.\n     */\n    function renounceOwnership() public virtual onlyOwner {\n        _transferOwnership(address(0));\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Can only be called by the current owner.\n     */\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        if (newOwner == address(0)) {\n            revert OwnableInvalidOwner(address(0));\n        }\n        _transferOwnership(newOwner);\n    }\n\n    /**\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\n     * Internal function without access restriction.\n     */\n    function _transferOwnership(address newOwner) internal virtual {\n        address oldOwner = _owner;\n        _owner = newOwner;\n        emit OwnershipTransferred(oldOwner, newOwner);\n    }\n}\n"},"@openzeppelin/contracts/interfaces/draft-IERC6093.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/draft-IERC6093.sol)\npragma solidity ^0.8.20;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"},"@openzeppelin/contracts/interfaces/IERC1363.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC1363.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"},"@openzeppelin/contracts/interfaces/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC165.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"},"@openzeppelin/contracts/interfaces/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"},"@openzeppelin/contracts/interfaces/IERC4626.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (interfaces/IERC4626.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"../token/ERC20/extensions/IERC20Metadata.sol\";\n\n/**\n * @dev Interface of the ERC-4626 \"Tokenized Vault Standard\", as defined in\n * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].\n */\ninterface IERC4626 is IERC20, IERC20Metadata {\n    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);\n\n    event Withdraw(\n        address indexed sender,\n        address indexed receiver,\n        address indexed owner,\n        uint256 assets,\n        uint256 shares\n    );\n\n    /**\n     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.\n     *\n     * - MUST be an ERC-20 token contract.\n     * - MUST NOT revert.\n     */\n    function asset() external view returns (address assetTokenAddress);\n\n    /**\n     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.\n     *\n     * - SHOULD include any compounding that occurs from yield.\n     * - MUST be inclusive of any fees that are charged against assets in the Vault.\n     * - MUST NOT revert.\n     */\n    function totalAssets() external view returns (uint256 totalManagedAssets);\n\n    /**\n     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal\n     * scenario where all the conditions are met.\n     *\n     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.\n     * - MUST NOT show any variations depending on the caller.\n     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.\n     * - MUST NOT revert.\n     *\n     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the\n     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and\n     * from.\n     */\n    function convertToShares(uint256 assets) external view returns (uint256 shares);\n\n    /**\n     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal\n     * scenario where all the conditions are met.\n     *\n     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.\n     * - MUST NOT show any variations depending on the caller.\n     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.\n     * - MUST NOT revert.\n     *\n     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the\n     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and\n     * from.\n     */\n    function convertToAssets(uint256 shares) external view returns (uint256 assets);\n\n    /**\n     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,\n     * through a deposit call.\n     *\n     * - MUST return a limited value if receiver is subject to some deposit limit.\n     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.\n     * - MUST NOT revert.\n     */\n    function maxDeposit(address receiver) external view returns (uint256 maxAssets);\n\n    /**\n     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given\n     * current on-chain conditions.\n     *\n     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit\n     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called\n     *   in the same transaction.\n     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the\n     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.\n     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.\n     * - MUST NOT revert.\n     *\n     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in\n     * share price or some other type of condition, meaning the depositor will lose assets by depositing.\n     */\n    function previewDeposit(uint256 assets) external view returns (uint256 shares);\n\n    /**\n     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.\n     *\n     * - MUST emit the Deposit event.\n     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n     *   deposit execution, and are accounted for during deposit.\n     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not\n     *   approving enough underlying tokens to the Vault contract, etc).\n     *\n     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.\n     */\n    function deposit(uint256 assets, address receiver) external returns (uint256 shares);\n\n    /**\n     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.\n     * - MUST return a limited value if receiver is subject to some mint limit.\n     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.\n     * - MUST NOT revert.\n     */\n    function maxMint(address receiver) external view returns (uint256 maxShares);\n\n    /**\n     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given\n     * current on-chain conditions.\n     *\n     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call\n     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the\n     *   same transaction.\n     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint\n     *   would be accepted, regardless if the user has enough tokens approved, etc.\n     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.\n     * - MUST NOT revert.\n     *\n     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in\n     * share price or some other type of condition, meaning the depositor will lose assets by minting.\n     */\n    function previewMint(uint256 shares) external view returns (uint256 assets);\n\n    /**\n     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.\n     *\n     * - MUST emit the Deposit event.\n     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint\n     *   execution, and are accounted for during mint.\n     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not\n     *   approving enough underlying tokens to the Vault contract, etc).\n     *\n     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.\n     */\n    function mint(uint256 shares, address receiver) external returns (uint256 assets);\n\n    /**\n     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the\n     * Vault, through a withdraw call.\n     *\n     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.\n     * - MUST NOT revert.\n     */\n    function maxWithdraw(address owner) external view returns (uint256 maxAssets);\n\n    /**\n     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,\n     * given current on-chain conditions.\n     *\n     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw\n     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if\n     *   called\n     *   in the same transaction.\n     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though\n     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.\n     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.\n     * - MUST NOT revert.\n     *\n     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in\n     * share price or some other type of condition, meaning the depositor will lose assets by depositing.\n     */\n    function previewWithdraw(uint256 assets) external view returns (uint256 shares);\n\n    /**\n     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.\n     *\n     * - MUST emit the Withdraw event.\n     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n     *   withdraw execution, and are accounted for during withdraw.\n     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner\n     *   not having enough shares, etc).\n     *\n     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.\n     * Those methods should be performed separately.\n     */\n    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);\n\n    /**\n     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,\n     * through a redeem call.\n     *\n     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.\n     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.\n     * - MUST NOT revert.\n     */\n    function maxRedeem(address owner) external view returns (uint256 maxShares);\n\n    /**\n     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,\n     * given current on-chain conditions.\n     *\n     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call\n     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the\n     *   same transaction.\n     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the\n     *   redemption would be accepted, regardless if the user has enough shares, etc.\n     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.\n     * - MUST NOT revert.\n     *\n     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in\n     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.\n     */\n    function previewRedeem(uint256 shares) external view returns (uint256 assets);\n\n    /**\n     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.\n     *\n     * - MUST emit the Withdraw event.\n     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the\n     *   redeem execution, and are accounted for during redeem.\n     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner\n     *   not having enough shares, etc).\n     *\n     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.\n     * Those methods should be performed separately.\n     */\n    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);\n}\n"},"@openzeppelin/contracts/interfaces/IERC5267.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)\n\npragma solidity ^0.8.20;\n\ninterface IERC5267 {\n    /**\n     * @dev MAY be emitted to signal that the domain could have changed.\n     */\n    event EIP712DomainChanged();\n\n    /**\n     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712\n     * signature.\n     */\n    function eip712Domain()\n        external\n        view\n        returns (\n            bytes1 fields,\n            string memory name,\n            string memory version,\n            uint256 chainId,\n            address verifyingContract,\n            bytes32 salt,\n            uint256[] memory extensions\n        );\n}\n"},"@openzeppelin/contracts/token/ERC20/ERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC20Metadata} from \"./extensions/IERC20Metadata.sol\";\nimport {Context} from \"../../utils/Context.sol\";\nimport {IERC20Errors} from \"../../interfaces/draft-IERC6093.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {\n    mapping(address account => uint256) private _balances;\n\n    mapping(address account => mapping(address spender => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * All two of these values are immutable: they can only be set once during\n     * construction.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the default value returned by this function, unless\n     * it's overridden.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /**\n     * @dev See {IERC20-totalSupply}.\n     */\n    function totalSupply() public view virtual returns (uint256) {\n        return _totalSupply;\n    }\n\n    /**\n     * @dev See {IERC20-balanceOf}.\n     */\n    function balanceOf(address account) public view virtual returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `value`.\n     */\n    function transfer(address to, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-allowance}.\n     */\n    function allowance(address owner, address spender) public view virtual returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Skips emitting an {Approval} event indicating an allowance update. This is not\n     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `value`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `value`.\n     */\n    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, value);\n        _transfer(from, to, value);\n        return true;\n    }\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _transfer(address from, address to, uint256 value) internal {\n        if (from == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        if (to == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(from, to, value);\n    }\n\n    /**\n     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n     * this function.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _update(address from, address to, uint256 value) internal virtual {\n        if (from == address(0)) {\n            // Overflow check required: The rest of the code assumes that totalSupply never overflows\n            _totalSupply += value;\n        } else {\n            uint256 fromBalance = _balances[from];\n            if (fromBalance < value) {\n                revert ERC20InsufficientBalance(from, fromBalance, value);\n            }\n            unchecked {\n                // Overflow not possible: value <= fromBalance <= totalSupply.\n                _balances[from] = fromBalance - value;\n            }\n        }\n\n        if (to == address(0)) {\n            unchecked {\n                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n                _totalSupply -= value;\n            }\n        } else {\n            unchecked {\n                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n                _balances[to] += value;\n            }\n        }\n\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n     * Relies on the `_update` mechanism\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _mint(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(address(0), account, value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n     * Relies on the `_update` mechanism.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead\n     */\n    function _burn(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        _update(account, address(0), value);\n    }\n\n    /**\n     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address owner, address spender, uint256 value) internal {\n        _approve(owner, spender, value, true);\n    }\n\n    /**\n     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n     *\n     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any\n     * `Approval` event during `transferFrom` operations.\n     *\n     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to\n     * true using the following override:\n     *\n     * ```solidity\n     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n     *     super._approve(owner, spender, value, true);\n     * }\n     * ```\n     *\n     * Requirements are the same as {_approve}.\n     */\n    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n        if (owner == address(0)) {\n            revert ERC20InvalidApprover(address(0));\n        }\n        if (spender == address(0)) {\n            revert ERC20InvalidSpender(address(0));\n        }\n        _allowances[owner][spender] = value;\n        if (emitEvent) {\n            emit Approval(owner, spender, value);\n        }\n    }\n\n    /**\n     * @dev Updates `owner` s allowance for `spender` based on spent `value`.\n     *\n     * Does not update the allowance value in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Does not emit an {Approval} event.\n     */\n    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance != type(uint256).max) {\n            if (currentAllowance < value) {\n                revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n            }\n            unchecked {\n                _approve(owner, spender, currentAllowance - value, false);\n            }\n        }\n    }\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/ERC4626.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20, IERC20Metadata, ERC20} from \"../ERC20.sol\";\nimport {SafeERC20} from \"../utils/SafeERC20.sol\";\nimport {IERC4626} from \"../../../interfaces/IERC4626.sol\";\nimport {Math} from \"../../../utils/math/Math.sol\";\n\n/**\n * @dev Implementation of the ERC-4626 \"Tokenized Vault Standard\" as defined in\n * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].\n *\n * This extension allows the minting and burning of \"shares\" (represented using the ERC-20 inheritance) in exchange for\n * underlying \"assets\" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends\n * the ERC-20 standard. Any additional extensions included along it would affect the \"shares\" token represented by this\n * contract and not the \"assets\" token which is an independent contract.\n *\n * [CAUTION]\n * ====\n * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning\n * with a \"donation\" to the vault that inflates the price of a share. This is variously known as a donation or inflation\n * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial\n * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may\n * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by\n * verifying the amount received is as expected, using a wrapper that performs these checks such as\n * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].\n *\n * Since v4.9, this implementation introduces configurable virtual assets and shares to help developers mitigate that risk.\n * The `_decimalsOffset()` corresponds to an offset in the decimal representation between the underlying asset's decimals\n * and the vault decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which\n * itself determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default\n * offset (0) makes it non-profitable even if an attacker is able to capture value from multiple user deposits, as a result\n * of the value being captured by the virtual shares (out of the attacker's donation) matching the attacker's expected gains.\n * With a larger offset, the attack becomes orders of magnitude more expensive than it is profitable. More details about the\n * underlying math can be found xref:erc4626.adoc#inflation-attack[here].\n *\n * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued\n * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets\n * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience\n * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the\n * `_convertToShares` and `_convertToAssets` functions.\n *\n * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].\n * ====\n */\nabstract contract ERC4626 is ERC20, IERC4626 {\n    using Math for uint256;\n\n    IERC20 private immutable _asset;\n    uint8 private immutable _underlyingDecimals;\n\n    /**\n     * @dev Attempted to deposit more assets than the max amount for `receiver`.\n     */\n    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);\n\n    /**\n     * @dev Attempted to mint more shares than the max amount for `receiver`.\n     */\n    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);\n\n    /**\n     * @dev Attempted to withdraw more assets than the max amount for `receiver`.\n     */\n    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);\n\n    /**\n     * @dev Attempted to redeem more shares than the max amount for `receiver`.\n     */\n    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);\n\n    /**\n     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC-20 or ERC-777).\n     */\n    constructor(IERC20 asset_) {\n        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);\n        _underlyingDecimals = success ? assetDecimals : 18;\n        _asset = asset_;\n    }\n\n    /**\n     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.\n     */\n    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool ok, uint8 assetDecimals) {\n        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(\n            abi.encodeCall(IERC20Metadata.decimals, ())\n        );\n        if (success && encodedDecimals.length >= 32) {\n            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));\n            if (returnedDecimals <= type(uint8).max) {\n                return (true, uint8(returnedDecimals));\n            }\n        }\n        return (false, 0);\n    }\n\n    /**\n     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This\n     * \"original\" value is cached during construction of the vault contract. If this read operation fails (e.g., the\n     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.\n     *\n     * See {IERC20Metadata-decimals}.\n     */\n    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {\n        return _underlyingDecimals + _decimalsOffset();\n    }\n\n    /** @dev See {IERC4626-asset}. */\n    function asset() public view virtual returns (address) {\n        return address(_asset);\n    }\n\n    /** @dev See {IERC4626-totalAssets}. */\n    function totalAssets() public view virtual returns (uint256) {\n        return _asset.balanceOf(address(this));\n    }\n\n    /** @dev See {IERC4626-convertToShares}. */\n    function convertToShares(uint256 assets) public view virtual returns (uint256) {\n        return _convertToShares(assets, Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-convertToAssets}. */\n    function convertToAssets(uint256 shares) public view virtual returns (uint256) {\n        return _convertToAssets(shares, Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-maxDeposit}. */\n    function maxDeposit(address) public view virtual returns (uint256) {\n        return type(uint256).max;\n    }\n\n    /** @dev See {IERC4626-maxMint}. */\n    function maxMint(address) public view virtual returns (uint256) {\n        return type(uint256).max;\n    }\n\n    /** @dev See {IERC4626-maxWithdraw}. */\n    function maxWithdraw(address owner) public view virtual returns (uint256) {\n        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-maxRedeem}. */\n    function maxRedeem(address owner) public view virtual returns (uint256) {\n        return balanceOf(owner);\n    }\n\n    /** @dev See {IERC4626-previewDeposit}. */\n    function previewDeposit(uint256 assets) public view virtual returns (uint256) {\n        return _convertToShares(assets, Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-previewMint}. */\n    function previewMint(uint256 shares) public view virtual returns (uint256) {\n        return _convertToAssets(shares, Math.Rounding.Ceil);\n    }\n\n    /** @dev See {IERC4626-previewWithdraw}. */\n    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {\n        return _convertToShares(assets, Math.Rounding.Ceil);\n    }\n\n    /** @dev See {IERC4626-previewRedeem}. */\n    function previewRedeem(uint256 shares) public view virtual returns (uint256) {\n        return _convertToAssets(shares, Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-deposit}. */\n    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {\n        uint256 maxAssets = maxDeposit(receiver);\n        if (assets > maxAssets) {\n            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);\n        }\n\n        uint256 shares = previewDeposit(assets);\n        _deposit(_msgSender(), receiver, assets, shares);\n\n        return shares;\n    }\n\n    /** @dev See {IERC4626-mint}. */\n    function mint(uint256 shares, address receiver) public virtual returns (uint256) {\n        uint256 maxShares = maxMint(receiver);\n        if (shares > maxShares) {\n            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);\n        }\n\n        uint256 assets = previewMint(shares);\n        _deposit(_msgSender(), receiver, assets, shares);\n\n        return assets;\n    }\n\n    /** @dev See {IERC4626-withdraw}. */\n    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {\n        uint256 maxAssets = maxWithdraw(owner);\n        if (assets > maxAssets) {\n            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);\n        }\n\n        uint256 shares = previewWithdraw(assets);\n        _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n        return shares;\n    }\n\n    /** @dev See {IERC4626-redeem}. */\n    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {\n        uint256 maxShares = maxRedeem(owner);\n        if (shares > maxShares) {\n            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);\n        }\n\n        uint256 assets = previewRedeem(shares);\n        _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n        return assets;\n    }\n\n    /**\n     * @dev Internal conversion function (from assets to shares) with support for rounding direction.\n     */\n    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {\n        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);\n    }\n\n    /**\n     * @dev Internal conversion function (from shares to assets) with support for rounding direction.\n     */\n    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {\n        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);\n    }\n\n    /**\n     * @dev Deposit/mint common workflow.\n     */\n    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {\n        // If _asset is ERC-777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the\n        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,\n        // calls the vault, which is assumed not malicious.\n        //\n        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the\n        // assets are transferred and before the shares are minted, which is a valid state.\n        // slither-disable-next-line reentrancy-no-eth\n        SafeERC20.safeTransferFrom(_asset, caller, address(this), assets);\n        _mint(receiver, shares);\n\n        emit Deposit(caller, receiver, assets, shares);\n    }\n\n    /**\n     * @dev Withdraw/redeem common workflow.\n     */\n    function _withdraw(\n        address caller,\n        address receiver,\n        address owner,\n        uint256 assets,\n        uint256 shares\n    ) internal virtual {\n        if (caller != owner) {\n            _spendAllowance(owner, caller, shares);\n        }\n\n        // If _asset is ERC-777, `transfer` can trigger a reentrancy AFTER the transfer happens through the\n        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,\n        // calls the vault, which is assumed not malicious.\n        //\n        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the\n        // shares are burned and after the assets are transferred, which is a valid state.\n        _burn(owner, shares);\n        SafeERC20.safeTransfer(_asset, receiver, assets);\n\n        emit Withdraw(caller, receiver, owner, assets, shares);\n    }\n\n    function _decimalsOffset() internal view virtual returns (uint8) {\n        return 0;\n    }\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"},"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/extensions/IERC20Permit.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * ==== Security Considerations\n *\n * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature\n * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be\n * considered as an intention to spend the allowance in any specific way. The second is that because permits have\n * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should\n * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be\n * generally recommended is:\n *\n * ```solidity\n * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {\n *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}\n *     doThing(..., value);\n * }\n *\n * function doThing(..., uint256 value) public {\n *     token.safeTransferFrom(msg.sender, address(this), value);\n *     ...\n * }\n * ```\n *\n * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of\n * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also\n * {SafeERC20-safeTransferFrom}).\n *\n * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so\n * contracts should have entry points that don't rely on permit.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     *\n     * CAUTION: See Security Considerations above.\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"},"@openzeppelin/contracts/token/ERC20/IERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"},"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\nimport {Address} from \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));\n\n        if (!_callOptionalReturnBool(token, approvalCall)) {\n            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));\n            _callOptionalReturn(token, approvalCall);\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            // bubble errors\n            if iszero(success) {\n                let ptr := mload(0x40)\n                returndatacopy(ptr, 0, returndatasize())\n                revert(ptr, returndatasize())\n            }\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n\n        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     *\n     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.\n     */\n    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {\n        bool success;\n        uint256 returnSize;\n        uint256 returnValue;\n        assembly (\"memory-safe\") {\n            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)\n            returnSize := returndatasize()\n            returnValue := mload(0)\n        }\n        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);\n    }\n}\n"},"@openzeppelin/contracts/utils/Address.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\nimport {Errors} from \"./Errors.sol\";\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert Errors.InsufficientBalance(address(this).balance, amount);\n        }\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        if (!success) {\n            revert Errors.FailedCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {Errors.FailedCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert Errors.InsufficientBalance(address(this).balance, value);\n        }\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {Errors.FailedCall}) in case\n     * of an unsuccessful call.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            // only check if target is a contract if the call was successful and the return data is empty\n            // otherwise we already know that it was a contract\n            if (returndata.length == 0 && target.code.length == 0) {\n                revert AddressEmptyCode(target);\n            }\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {Errors.FailedCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Reverts with returndata if present. Otherwise reverts with {Errors.FailedCall}.\n     */\n    function _revert(bytes memory returndata) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            assembly (\"memory-safe\") {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert Errors.FailedCall();\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Context.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"},"@openzeppelin/contracts/utils/Errors.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Errors.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of common custom errors used in multiple contracts\n *\n * IMPORTANT: Backwards compatibility is not guaranteed in future versions of the library.\n * It is recommended to avoid relying on the error API for critical functionality.\n *\n * _Available since v5.1._\n */\nlibrary Errors {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error InsufficientBalance(uint256 balance, uint256 needed);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedCall();\n\n    /**\n     * @dev The deployment failed.\n     */\n    error FailedDeployment();\n\n    /**\n     * @dev A necessary precompile is missing.\n     */\n    error MissingPrecompile(address);\n}\n"},"@openzeppelin/contracts/utils/introspection/IERC165.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/introspection/IERC165.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"},"@openzeppelin/contracts/utils/math/Math.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.20;\n\nimport {Panic} from \"../Panic.sol\";\nimport {SafeCast} from \"./SafeCast.sol\";\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n    enum Rounding {\n        Floor, // Toward negative infinity\n        Ceil, // Toward positive infinity\n        Trunc, // Toward zero\n        Expand // Away from zero\n    }\n\n    /**\n     * @dev Returns the addition of two unsigned integers, with an success flag (no overflow).\n     */\n    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            uint256 c = a + b;\n            if (c < a) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the subtraction of two unsigned integers, with an success flag (no overflow).\n     */\n    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            if (b > a) return (false, 0);\n            return (true, a - b);\n        }\n    }\n\n    /**\n     * @dev Returns the multiplication of two unsigned integers, with an success flag (no overflow).\n     */\n    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the\n            // benefit is lost if 'b' is also tested.\n            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522\n            if (a == 0) return (true, 0);\n            uint256 c = a * b;\n            if (c / a != b) return (false, 0);\n            return (true, c);\n        }\n    }\n\n    /**\n     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a / b);\n        }\n    }\n\n    /**\n     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).\n     */\n    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {\n        unchecked {\n            if (b == 0) return (false, 0);\n            return (true, a % b);\n        }\n    }\n\n    /**\n     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.\n     *\n     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.\n     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute\n     * one branch when needed, making this function more expensive.\n     */\n    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {\n        unchecked {\n            // branchless ternary works because:\n            // b ^ (a ^ b) == a\n            // b ^ 0 == b\n            return b ^ ((a ^ b) * SafeCast.toUint(condition));\n        }\n    }\n\n    /**\n     * @dev Returns the largest of two numbers.\n     */\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a > b, a, b);\n    }\n\n    /**\n     * @dev Returns the smallest of two numbers.\n     */\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\n        return ternary(a < b, a, b);\n    }\n\n    /**\n     * @dev Returns the average of two numbers. The result is rounded towards\n     * zero.\n     */\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\n        // (a + b) / 2 can overflow.\n        return (a & b) + (a ^ b) / 2;\n    }\n\n    /**\n     * @dev Returns the ceiling of the division of two numbers.\n     *\n     * This differs from standard division with `/` in that it rounds towards infinity instead\n     * of rounding towards zero.\n     */\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n        if (b == 0) {\n            // Guarantee the same behavior as in a regular Solidity division.\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n\n        // The following calculation ensures accurate ceiling division without overflow.\n        // Since a is non-zero, (a - 1) / b will not overflow.\n        // The largest possible result occurs when (a - 1) / b is type(uint256).max,\n        // but the largest value we can obtain is type(uint256).max - 1, which happens\n        // when a = type(uint256).max and b = 1.\n        unchecked {\n            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);\n        }\n    }\n\n    /**\n     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or\n     * denominator == 0.\n     *\n     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by\n     * Uniswap Labs also under MIT license.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\n        unchecked {\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use\n            // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n            // variables such that product = prod1 * 2²⁵⁶ + prod0.\n            uint256 prod0 = x * y; // Least significant 256 bits of the product\n            uint256 prod1; // Most significant 256 bits of the product\n            assembly {\n                let mm := mulmod(x, y, not(0))\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n            }\n\n            // Handle non-overflow cases, 256 by 256 division.\n            if (prod1 == 0) {\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\n                // The surrounding unchecked block does not change this fact.\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\n                return prod0 / denominator;\n            }\n\n            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.\n            if (denominator <= prod1) {\n                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));\n            }\n\n            ///////////////////////////////////////////////\n            // 512 by 256 division.\n            ///////////////////////////////////////////////\n\n            // Make division exact by subtracting the remainder from [prod1 prod0].\n            uint256 remainder;\n            assembly {\n                // Compute remainder using mulmod.\n                remainder := mulmod(x, y, denominator)\n\n                // Subtract 256 bit number from 512 bit number.\n                prod1 := sub(prod1, gt(remainder, prod0))\n                prod0 := sub(prod0, remainder)\n            }\n\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.\n            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.\n\n            uint256 twos = denominator & (0 - denominator);\n            assembly {\n                // Divide denominator by twos.\n                denominator := div(denominator, twos)\n\n                // Divide [prod1 prod0] by twos.\n                prod0 := div(prod0, twos)\n\n                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.\n                twos := add(div(sub(0, twos), twos), 1)\n            }\n\n            // Shift in bits from prod1 into prod0.\n            prod0 |= prod1 * twos;\n\n            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such\n            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for\n            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.\n            uint256 inverse = (3 * denominator) ^ 2;\n\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also\n            // works in modular arithmetic, doubling the correct bits in each step.\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶\n            inverse *= 2 - denominator * inverse; // inverse mod 2³²\n            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴\n            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸\n            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶\n\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is\n            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and prod1\n            // is no longer required.\n            result = prod0 * inverse;\n            return result;\n        }\n    }\n\n    /**\n     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.\n     */\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\n        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);\n    }\n\n    /**\n     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.\n     *\n     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.\n     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.\n     *\n     * If the input value is not inversible, 0 is returned.\n     *\n     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the\n     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.\n     */\n    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {\n        unchecked {\n            if (n == 0) return 0;\n\n            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)\n            // Used to compute integers x and y such that: ax + ny = gcd(a, n).\n            // When the gcd is 1, then the inverse of a modulo n exists and it's x.\n            // ax + ny = 1\n            // ax = 1 + (-y)n\n            // ax ≡ 1 (mod n) # x is the inverse of a modulo n\n\n            // If the remainder is 0 the gcd is n right away.\n            uint256 remainder = a % n;\n            uint256 gcd = n;\n\n            // Therefore the initial coefficients are:\n            // ax + ny = gcd(a, n) = n\n            // 0a + 1n = n\n            int256 x = 0;\n            int256 y = 1;\n\n            while (remainder != 0) {\n                uint256 quotient = gcd / remainder;\n\n                (gcd, remainder) = (\n                    // The old remainder is the next gcd to try.\n                    remainder,\n                    // Compute the next remainder.\n                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd\n                    // where gcd is at most n (capped to type(uint256).max)\n                    gcd - remainder * quotient\n                );\n\n                (x, y) = (\n                    // Increment the coefficient of a.\n                    y,\n                    // Decrement the coefficient of n.\n                    // Can overflow, but the result is casted to uint256 so that the\n                    // next value of y is \"wrapped around\" to a value between 0 and n - 1.\n                    x - y * int256(quotient)\n                );\n            }\n\n            if (gcd != 1) return 0; // No inverse exists.\n            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.\n        }\n    }\n\n    /**\n     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.\n     *\n     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is\n     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that\n     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.\n     *\n     * NOTE: this function does NOT check that `p` is a prime greater than `2`.\n     */\n    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {\n        unchecked {\n            return Math.modExp(a, p - 2, p);\n        }\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)\n     *\n     * Requirements:\n     * - modulus can't be zero\n     * - underlying staticcall to precompile must succeed\n     *\n     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make\n     * sure the chain you're using it on supports the precompiled contract for modular exponentiation\n     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,\n     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly\n     * interpreted as 0.\n     */\n    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {\n        (bool success, uint256 result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).\n     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying\n     * to operate modulo 0 or if the underlying precompile reverted.\n     *\n     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain\n     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in\n     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack\n     * of a revert, but the result may be incorrectly interpreted as 0.\n     */\n    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {\n        if (m == 0) return (false, 0);\n        assembly (\"memory-safe\") {\n            let ptr := mload(0x40)\n            // | Offset    | Content    | Content (Hex)                                                      |\n            // |-----------|------------|--------------------------------------------------------------------|\n            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |\n            // | 0x60:0x7f | value of b | 0x<.............................................................b> |\n            // | 0x80:0x9f | value of e | 0x<.............................................................e> |\n            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |\n            mstore(ptr, 0x20)\n            mstore(add(ptr, 0x20), 0x20)\n            mstore(add(ptr, 0x40), 0x20)\n            mstore(add(ptr, 0x60), b)\n            mstore(add(ptr, 0x80), e)\n            mstore(add(ptr, 0xa0), m)\n\n            // Given the result < m, it's guaranteed to fit in 32 bytes,\n            // so we can use the memory scratch space located at offset 0.\n            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)\n            result := mload(0x00)\n        }\n    }\n\n    /**\n     * @dev Variant of {modExp} that supports inputs of arbitrary length.\n     */\n    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {\n        (bool success, bytes memory result) = tryModExp(b, e, m);\n        if (!success) {\n            Panic.panic(Panic.DIVISION_BY_ZERO);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.\n     */\n    function tryModExp(\n        bytes memory b,\n        bytes memory e,\n        bytes memory m\n    ) internal view returns (bool success, bytes memory result) {\n        if (_zeroBytes(m)) return (false, new bytes(0));\n\n        uint256 mLen = m.length;\n\n        // Encode call args in result and move the free memory pointer\n        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);\n\n        assembly (\"memory-safe\") {\n            let dataPtr := add(result, 0x20)\n            // Write result on top of args to avoid allocating extra memory.\n            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)\n            // Overwrite the length.\n            // result.length > returndatasize() is guaranteed because returndatasize() == m.length\n            mstore(result, mLen)\n            // Set the memory pointer after the returned data.\n            mstore(0x40, add(dataPtr, mLen))\n        }\n    }\n\n    /**\n     * @dev Returns whether the provided byte array is zero.\n     */\n    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {\n        for (uint256 i = 0; i < byteArray.length; ++i) {\n            if (byteArray[i] != 0) {\n                return false;\n            }\n        }\n        return true;\n    }\n\n    /**\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded\n     * towards zero.\n     *\n     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only\n     * using integer operations.\n     */\n    function sqrt(uint256 a) internal pure returns (uint256) {\n        unchecked {\n            // Take care of easy edge cases when a == 0 or a == 1\n            if (a <= 1) {\n                return a;\n            }\n\n            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a\n            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between\n            // the current value as `ε_n = | x_n - sqrt(a) |`.\n            //\n            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root\n            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is\n            // bigger than any uint256.\n            //\n            // By noticing that\n            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`\n            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar\n            // to the msb function.\n            uint256 aa = a;\n            uint256 xn = 1;\n\n            if (aa >= (1 << 128)) {\n                aa >>= 128;\n                xn <<= 64;\n            }\n            if (aa >= (1 << 64)) {\n                aa >>= 64;\n                xn <<= 32;\n            }\n            if (aa >= (1 << 32)) {\n                aa >>= 32;\n                xn <<= 16;\n            }\n            if (aa >= (1 << 16)) {\n                aa >>= 16;\n                xn <<= 8;\n            }\n            if (aa >= (1 << 8)) {\n                aa >>= 8;\n                xn <<= 4;\n            }\n            if (aa >= (1 << 4)) {\n                aa >>= 4;\n                xn <<= 2;\n            }\n            if (aa >= (1 << 2)) {\n                xn <<= 1;\n            }\n\n            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).\n            //\n            // We can refine our estimation by noticing that the middle of that interval minimizes the error.\n            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).\n            // This is going to be our x_0 (and ε_0)\n            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)\n\n            // From here, Newton's method give us:\n            // x_{n+1} = (x_n + a / x_n) / 2\n            //\n            // One should note that:\n            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a\n            //              = ((x_n² + a) / (2 * x_n))² - a\n            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a\n            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)\n            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)\n            //              = (x_n² - a)² / (2 * x_n)²\n            //              = ((x_n² - a) / (2 * x_n))²\n            //              ≥ 0\n            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n\n            //\n            // This gives us the proof of quadratic convergence of the sequence:\n            // ε_{n+1} = | x_{n+1} - sqrt(a) |\n            //         = | (x_n + a / x_n) / 2 - sqrt(a) |\n            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |\n            //         = | (x_n - sqrt(a))² / (2 * x_n) |\n            //         = | ε_n² / (2 * x_n) |\n            //         = ε_n² / | (2 * x_n) |\n            //\n            // For the first iteration, we have a special case where x_0 is known:\n            // ε_1 = ε_0² / | (2 * x_0) |\n            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))\n            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))\n            //     ≤ 2**(e-3) / 3\n            //     ≤ 2**(e-3-log2(3))\n            //     ≤ 2**(e-4.5)\n            //\n            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:\n            // ε_{n+1} = ε_n² / | (2 * x_n) |\n            //         ≤ (2**(e-k))² / (2 * 2**(e-1))\n            //         ≤ 2**(2*e-2*k) / 2**e\n            //         ≤ 2**(e-2*k)\n            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above\n            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5\n            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9\n            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18\n            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36\n            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72\n\n            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision\n            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either\n            // sqrt(a) or sqrt(a) + 1.\n            return xn - SafeCast.toUint(xn > a / xn);\n        }\n    }\n\n    /**\n     * @dev Calculates sqrt(a), following the selected rounding direction.\n     */\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = sqrt(a);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 2 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        uint256 exp;\n        unchecked {\n            exp = 128 * SafeCast.toUint(value > (1 << 128) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 64 * SafeCast.toUint(value > (1 << 64) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 32 * SafeCast.toUint(value > (1 << 32) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 16 * SafeCast.toUint(value > (1 << 16) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 8 * SafeCast.toUint(value > (1 << 8) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 4 * SafeCast.toUint(value > (1 << 4) - 1);\n            value >>= exp;\n            result += exp;\n\n            exp = 2 * SafeCast.toUint(value > (1 << 2) - 1);\n            value >>= exp;\n            result += exp;\n\n            result += SafeCast.toUint(value > 1);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log2(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 10 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        unchecked {\n            if (value >= 10 ** 64) {\n                value /= 10 ** 64;\n                result += 64;\n            }\n            if (value >= 10 ** 32) {\n                value /= 10 ** 32;\n                result += 32;\n            }\n            if (value >= 10 ** 16) {\n                value /= 10 ** 16;\n                result += 16;\n            }\n            if (value >= 10 ** 8) {\n                value /= 10 ** 8;\n                result += 8;\n            }\n            if (value >= 10 ** 4) {\n                value /= 10 ** 4;\n                result += 4;\n            }\n            if (value >= 10 ** 2) {\n                value /= 10 ** 2;\n                result += 2;\n            }\n            if (value >= 10 ** 1) {\n                result += 1;\n            }\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log10(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);\n        }\n    }\n\n    /**\n     * @dev Return the log in base 256 of a positive value rounded towards zero.\n     * Returns 0 if given 0.\n     *\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n     */\n    function log256(uint256 value) internal pure returns (uint256) {\n        uint256 result = 0;\n        uint256 isGt;\n        unchecked {\n            isGt = SafeCast.toUint(value > (1 << 128) - 1);\n            value >>= isGt * 128;\n            result += isGt * 16;\n\n            isGt = SafeCast.toUint(value > (1 << 64) - 1);\n            value >>= isGt * 64;\n            result += isGt * 8;\n\n            isGt = SafeCast.toUint(value > (1 << 32) - 1);\n            value >>= isGt * 32;\n            result += isGt * 4;\n\n            isGt = SafeCast.toUint(value > (1 << 16) - 1);\n            value >>= isGt * 16;\n            result += isGt * 2;\n\n            result += SafeCast.toUint(value > (1 << 8) - 1);\n        }\n        return result;\n    }\n\n    /**\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\n     * Returns 0 if given 0.\n     */\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n        unchecked {\n            uint256 result = log256(value);\n            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);\n        }\n    }\n\n    /**\n     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.\n     */\n    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {\n        return uint8(rounding) % 2 == 1;\n    }\n}\n"},"@openzeppelin/contracts/utils/math/SafeCast.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n */\nlibrary SafeCast {\n    /**\n     * @dev Value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);\n\n    /**\n     * @dev An int value doesn't fit in an uint of `bits` size.\n     */\n    error SafeCastOverflowedIntToUint(int256 value);\n\n    /**\n     * @dev Value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);\n\n    /**\n     * @dev An uint value doesn't fit in an int of `bits` size.\n     */\n    error SafeCastOverflowedUintToInt(uint256 value);\n\n    /**\n     * @dev Returns the downcasted uint248 from uint256, reverting on\n     * overflow (when the input is greater than largest uint248).\n     *\n     * Counterpart to Solidity's `uint248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toUint248(uint256 value) internal pure returns (uint248) {\n        if (value > type(uint248).max) {\n            revert SafeCastOverflowedUintDowncast(248, value);\n        }\n        return uint248(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint240 from uint256, reverting on\n     * overflow (when the input is greater than largest uint240).\n     *\n     * Counterpart to Solidity's `uint240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toUint240(uint256 value) internal pure returns (uint240) {\n        if (value > type(uint240).max) {\n            revert SafeCastOverflowedUintDowncast(240, value);\n        }\n        return uint240(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint232 from uint256, reverting on\n     * overflow (when the input is greater than largest uint232).\n     *\n     * Counterpart to Solidity's `uint232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toUint232(uint256 value) internal pure returns (uint232) {\n        if (value > type(uint232).max) {\n            revert SafeCastOverflowedUintDowncast(232, value);\n        }\n        return uint232(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint224 from uint256, reverting on\n     * overflow (when the input is greater than largest uint224).\n     *\n     * Counterpart to Solidity's `uint224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toUint224(uint256 value) internal pure returns (uint224) {\n        if (value > type(uint224).max) {\n            revert SafeCastOverflowedUintDowncast(224, value);\n        }\n        return uint224(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint216 from uint256, reverting on\n     * overflow (when the input is greater than largest uint216).\n     *\n     * Counterpart to Solidity's `uint216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toUint216(uint256 value) internal pure returns (uint216) {\n        if (value > type(uint216).max) {\n            revert SafeCastOverflowedUintDowncast(216, value);\n        }\n        return uint216(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint208 from uint256, reverting on\n     * overflow (when the input is greater than largest uint208).\n     *\n     * Counterpart to Solidity's `uint208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toUint208(uint256 value) internal pure returns (uint208) {\n        if (value > type(uint208).max) {\n            revert SafeCastOverflowedUintDowncast(208, value);\n        }\n        return uint208(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint200 from uint256, reverting on\n     * overflow (when the input is greater than largest uint200).\n     *\n     * Counterpart to Solidity's `uint200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toUint200(uint256 value) internal pure returns (uint200) {\n        if (value > type(uint200).max) {\n            revert SafeCastOverflowedUintDowncast(200, value);\n        }\n        return uint200(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint192 from uint256, reverting on\n     * overflow (when the input is greater than largest uint192).\n     *\n     * Counterpart to Solidity's `uint192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toUint192(uint256 value) internal pure returns (uint192) {\n        if (value > type(uint192).max) {\n            revert SafeCastOverflowedUintDowncast(192, value);\n        }\n        return uint192(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint184 from uint256, reverting on\n     * overflow (when the input is greater than largest uint184).\n     *\n     * Counterpart to Solidity's `uint184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toUint184(uint256 value) internal pure returns (uint184) {\n        if (value > type(uint184).max) {\n            revert SafeCastOverflowedUintDowncast(184, value);\n        }\n        return uint184(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint176 from uint256, reverting on\n     * overflow (when the input is greater than largest uint176).\n     *\n     * Counterpart to Solidity's `uint176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toUint176(uint256 value) internal pure returns (uint176) {\n        if (value > type(uint176).max) {\n            revert SafeCastOverflowedUintDowncast(176, value);\n        }\n        return uint176(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint168 from uint256, reverting on\n     * overflow (when the input is greater than largest uint168).\n     *\n     * Counterpart to Solidity's `uint168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toUint168(uint256 value) internal pure returns (uint168) {\n        if (value > type(uint168).max) {\n            revert SafeCastOverflowedUintDowncast(168, value);\n        }\n        return uint168(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint160 from uint256, reverting on\n     * overflow (when the input is greater than largest uint160).\n     *\n     * Counterpart to Solidity's `uint160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toUint160(uint256 value) internal pure returns (uint160) {\n        if (value > type(uint160).max) {\n            revert SafeCastOverflowedUintDowncast(160, value);\n        }\n        return uint160(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint152 from uint256, reverting on\n     * overflow (when the input is greater than largest uint152).\n     *\n     * Counterpart to Solidity's `uint152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toUint152(uint256 value) internal pure returns (uint152) {\n        if (value > type(uint152).max) {\n            revert SafeCastOverflowedUintDowncast(152, value);\n        }\n        return uint152(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint144 from uint256, reverting on\n     * overflow (when the input is greater than largest uint144).\n     *\n     * Counterpart to Solidity's `uint144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toUint144(uint256 value) internal pure returns (uint144) {\n        if (value > type(uint144).max) {\n            revert SafeCastOverflowedUintDowncast(144, value);\n        }\n        return uint144(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint136 from uint256, reverting on\n     * overflow (when the input is greater than largest uint136).\n     *\n     * Counterpart to Solidity's `uint136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toUint136(uint256 value) internal pure returns (uint136) {\n        if (value > type(uint136).max) {\n            revert SafeCastOverflowedUintDowncast(136, value);\n        }\n        return uint136(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint128 from uint256, reverting on\n     * overflow (when the input is greater than largest uint128).\n     *\n     * Counterpart to Solidity's `uint128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toUint128(uint256 value) internal pure returns (uint128) {\n        if (value > type(uint128).max) {\n            revert SafeCastOverflowedUintDowncast(128, value);\n        }\n        return uint128(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint120 from uint256, reverting on\n     * overflow (when the input is greater than largest uint120).\n     *\n     * Counterpart to Solidity's `uint120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toUint120(uint256 value) internal pure returns (uint120) {\n        if (value > type(uint120).max) {\n            revert SafeCastOverflowedUintDowncast(120, value);\n        }\n        return uint120(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint112 from uint256, reverting on\n     * overflow (when the input is greater than largest uint112).\n     *\n     * Counterpart to Solidity's `uint112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toUint112(uint256 value) internal pure returns (uint112) {\n        if (value > type(uint112).max) {\n            revert SafeCastOverflowedUintDowncast(112, value);\n        }\n        return uint112(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint104 from uint256, reverting on\n     * overflow (when the input is greater than largest uint104).\n     *\n     * Counterpart to Solidity's `uint104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toUint104(uint256 value) internal pure returns (uint104) {\n        if (value > type(uint104).max) {\n            revert SafeCastOverflowedUintDowncast(104, value);\n        }\n        return uint104(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint96 from uint256, reverting on\n     * overflow (when the input is greater than largest uint96).\n     *\n     * Counterpart to Solidity's `uint96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toUint96(uint256 value) internal pure returns (uint96) {\n        if (value > type(uint96).max) {\n            revert SafeCastOverflowedUintDowncast(96, value);\n        }\n        return uint96(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint88 from uint256, reverting on\n     * overflow (when the input is greater than largest uint88).\n     *\n     * Counterpart to Solidity's `uint88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toUint88(uint256 value) internal pure returns (uint88) {\n        if (value > type(uint88).max) {\n            revert SafeCastOverflowedUintDowncast(88, value);\n        }\n        return uint88(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint80 from uint256, reverting on\n     * overflow (when the input is greater than largest uint80).\n     *\n     * Counterpart to Solidity's `uint80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toUint80(uint256 value) internal pure returns (uint80) {\n        if (value > type(uint80).max) {\n            revert SafeCastOverflowedUintDowncast(80, value);\n        }\n        return uint80(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint72 from uint256, reverting on\n     * overflow (when the input is greater than largest uint72).\n     *\n     * Counterpart to Solidity's `uint72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toUint72(uint256 value) internal pure returns (uint72) {\n        if (value > type(uint72).max) {\n            revert SafeCastOverflowedUintDowncast(72, value);\n        }\n        return uint72(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint64 from uint256, reverting on\n     * overflow (when the input is greater than largest uint64).\n     *\n     * Counterpart to Solidity's `uint64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toUint64(uint256 value) internal pure returns (uint64) {\n        if (value > type(uint64).max) {\n            revert SafeCastOverflowedUintDowncast(64, value);\n        }\n        return uint64(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint56 from uint256, reverting on\n     * overflow (when the input is greater than largest uint56).\n     *\n     * Counterpart to Solidity's `uint56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toUint56(uint256 value) internal pure returns (uint56) {\n        if (value > type(uint56).max) {\n            revert SafeCastOverflowedUintDowncast(56, value);\n        }\n        return uint56(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint48 from uint256, reverting on\n     * overflow (when the input is greater than largest uint48).\n     *\n     * Counterpart to Solidity's `uint48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toUint48(uint256 value) internal pure returns (uint48) {\n        if (value > type(uint48).max) {\n            revert SafeCastOverflowedUintDowncast(48, value);\n        }\n        return uint48(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint40 from uint256, reverting on\n     * overflow (when the input is greater than largest uint40).\n     *\n     * Counterpart to Solidity's `uint40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toUint40(uint256 value) internal pure returns (uint40) {\n        if (value > type(uint40).max) {\n            revert SafeCastOverflowedUintDowncast(40, value);\n        }\n        return uint40(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint32 from uint256, reverting on\n     * overflow (when the input is greater than largest uint32).\n     *\n     * Counterpart to Solidity's `uint32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toUint32(uint256 value) internal pure returns (uint32) {\n        if (value > type(uint32).max) {\n            revert SafeCastOverflowedUintDowncast(32, value);\n        }\n        return uint32(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint24 from uint256, reverting on\n     * overflow (when the input is greater than largest uint24).\n     *\n     * Counterpart to Solidity's `uint24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toUint24(uint256 value) internal pure returns (uint24) {\n        if (value > type(uint24).max) {\n            revert SafeCastOverflowedUintDowncast(24, value);\n        }\n        return uint24(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint16 from uint256, reverting on\n     * overflow (when the input is greater than largest uint16).\n     *\n     * Counterpart to Solidity's `uint16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toUint16(uint256 value) internal pure returns (uint16) {\n        if (value > type(uint16).max) {\n            revert SafeCastOverflowedUintDowncast(16, value);\n        }\n        return uint16(value);\n    }\n\n    /**\n     * @dev Returns the downcasted uint8 from uint256, reverting on\n     * overflow (when the input is greater than largest uint8).\n     *\n     * Counterpart to Solidity's `uint8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toUint8(uint256 value) internal pure returns (uint8) {\n        if (value > type(uint8).max) {\n            revert SafeCastOverflowedUintDowncast(8, value);\n        }\n        return uint8(value);\n    }\n\n    /**\n     * @dev Converts a signed int256 into an unsigned uint256.\n     *\n     * Requirements:\n     *\n     * - input must be greater than or equal to 0.\n     */\n    function toUint256(int256 value) internal pure returns (uint256) {\n        if (value < 0) {\n            revert SafeCastOverflowedIntToUint(value);\n        }\n        return uint256(value);\n    }\n\n    /**\n     * @dev Returns the downcasted int248 from int256, reverting on\n     * overflow (when the input is less than smallest int248 or\n     * greater than largest int248).\n     *\n     * Counterpart to Solidity's `int248` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 248 bits\n     */\n    function toInt248(int256 value) internal pure returns (int248 downcasted) {\n        downcasted = int248(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(248, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int240 from int256, reverting on\n     * overflow (when the input is less than smallest int240 or\n     * greater than largest int240).\n     *\n     * Counterpart to Solidity's `int240` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 240 bits\n     */\n    function toInt240(int256 value) internal pure returns (int240 downcasted) {\n        downcasted = int240(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(240, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int232 from int256, reverting on\n     * overflow (when the input is less than smallest int232 or\n     * greater than largest int232).\n     *\n     * Counterpart to Solidity's `int232` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 232 bits\n     */\n    function toInt232(int256 value) internal pure returns (int232 downcasted) {\n        downcasted = int232(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(232, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int224 from int256, reverting on\n     * overflow (when the input is less than smallest int224 or\n     * greater than largest int224).\n     *\n     * Counterpart to Solidity's `int224` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 224 bits\n     */\n    function toInt224(int256 value) internal pure returns (int224 downcasted) {\n        downcasted = int224(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(224, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int216 from int256, reverting on\n     * overflow (when the input is less than smallest int216 or\n     * greater than largest int216).\n     *\n     * Counterpart to Solidity's `int216` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 216 bits\n     */\n    function toInt216(int256 value) internal pure returns (int216 downcasted) {\n        downcasted = int216(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(216, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int208 from int256, reverting on\n     * overflow (when the input is less than smallest int208 or\n     * greater than largest int208).\n     *\n     * Counterpart to Solidity's `int208` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 208 bits\n     */\n    function toInt208(int256 value) internal pure returns (int208 downcasted) {\n        downcasted = int208(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(208, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int200 from int256, reverting on\n     * overflow (when the input is less than smallest int200 or\n     * greater than largest int200).\n     *\n     * Counterpart to Solidity's `int200` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 200 bits\n     */\n    function toInt200(int256 value) internal pure returns (int200 downcasted) {\n        downcasted = int200(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(200, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int192 from int256, reverting on\n     * overflow (when the input is less than smallest int192 or\n     * greater than largest int192).\n     *\n     * Counterpart to Solidity's `int192` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 192 bits\n     */\n    function toInt192(int256 value) internal pure returns (int192 downcasted) {\n        downcasted = int192(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(192, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int184 from int256, reverting on\n     * overflow (when the input is less than smallest int184 or\n     * greater than largest int184).\n     *\n     * Counterpart to Solidity's `int184` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 184 bits\n     */\n    function toInt184(int256 value) internal pure returns (int184 downcasted) {\n        downcasted = int184(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(184, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int176 from int256, reverting on\n     * overflow (when the input is less than smallest int176 or\n     * greater than largest int176).\n     *\n     * Counterpart to Solidity's `int176` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 176 bits\n     */\n    function toInt176(int256 value) internal pure returns (int176 downcasted) {\n        downcasted = int176(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(176, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int168 from int256, reverting on\n     * overflow (when the input is less than smallest int168 or\n     * greater than largest int168).\n     *\n     * Counterpart to Solidity's `int168` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 168 bits\n     */\n    function toInt168(int256 value) internal pure returns (int168 downcasted) {\n        downcasted = int168(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(168, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int160 from int256, reverting on\n     * overflow (when the input is less than smallest int160 or\n     * greater than largest int160).\n     *\n     * Counterpart to Solidity's `int160` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 160 bits\n     */\n    function toInt160(int256 value) internal pure returns (int160 downcasted) {\n        downcasted = int160(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(160, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int152 from int256, reverting on\n     * overflow (when the input is less than smallest int152 or\n     * greater than largest int152).\n     *\n     * Counterpart to Solidity's `int152` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 152 bits\n     */\n    function toInt152(int256 value) internal pure returns (int152 downcasted) {\n        downcasted = int152(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(152, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int144 from int256, reverting on\n     * overflow (when the input is less than smallest int144 or\n     * greater than largest int144).\n     *\n     * Counterpart to Solidity's `int144` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 144 bits\n     */\n    function toInt144(int256 value) internal pure returns (int144 downcasted) {\n        downcasted = int144(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(144, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int136 from int256, reverting on\n     * overflow (when the input is less than smallest int136 or\n     * greater than largest int136).\n     *\n     * Counterpart to Solidity's `int136` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 136 bits\n     */\n    function toInt136(int256 value) internal pure returns (int136 downcasted) {\n        downcasted = int136(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(136, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int128 from int256, reverting on\n     * overflow (when the input is less than smallest int128 or\n     * greater than largest int128).\n     *\n     * Counterpart to Solidity's `int128` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 128 bits\n     */\n    function toInt128(int256 value) internal pure returns (int128 downcasted) {\n        downcasted = int128(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(128, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int120 from int256, reverting on\n     * overflow (when the input is less than smallest int120 or\n     * greater than largest int120).\n     *\n     * Counterpart to Solidity's `int120` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 120 bits\n     */\n    function toInt120(int256 value) internal pure returns (int120 downcasted) {\n        downcasted = int120(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(120, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int112 from int256, reverting on\n     * overflow (when the input is less than smallest int112 or\n     * greater than largest int112).\n     *\n     * Counterpart to Solidity's `int112` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 112 bits\n     */\n    function toInt112(int256 value) internal pure returns (int112 downcasted) {\n        downcasted = int112(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(112, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int104 from int256, reverting on\n     * overflow (when the input is less than smallest int104 or\n     * greater than largest int104).\n     *\n     * Counterpart to Solidity's `int104` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 104 bits\n     */\n    function toInt104(int256 value) internal pure returns (int104 downcasted) {\n        downcasted = int104(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(104, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int96 from int256, reverting on\n     * overflow (when the input is less than smallest int96 or\n     * greater than largest int96).\n     *\n     * Counterpart to Solidity's `int96` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 96 bits\n     */\n    function toInt96(int256 value) internal pure returns (int96 downcasted) {\n        downcasted = int96(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(96, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int88 from int256, reverting on\n     * overflow (when the input is less than smallest int88 or\n     * greater than largest int88).\n     *\n     * Counterpart to Solidity's `int88` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 88 bits\n     */\n    function toInt88(int256 value) internal pure returns (int88 downcasted) {\n        downcasted = int88(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(88, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int80 from int256, reverting on\n     * overflow (when the input is less than smallest int80 or\n     * greater than largest int80).\n     *\n     * Counterpart to Solidity's `int80` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 80 bits\n     */\n    function toInt80(int256 value) internal pure returns (int80 downcasted) {\n        downcasted = int80(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(80, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int72 from int256, reverting on\n     * overflow (when the input is less than smallest int72 or\n     * greater than largest int72).\n     *\n     * Counterpart to Solidity's `int72` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 72 bits\n     */\n    function toInt72(int256 value) internal pure returns (int72 downcasted) {\n        downcasted = int72(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(72, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int64 from int256, reverting on\n     * overflow (when the input is less than smallest int64 or\n     * greater than largest int64).\n     *\n     * Counterpart to Solidity's `int64` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 64 bits\n     */\n    function toInt64(int256 value) internal pure returns (int64 downcasted) {\n        downcasted = int64(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(64, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int56 from int256, reverting on\n     * overflow (when the input is less than smallest int56 or\n     * greater than largest int56).\n     *\n     * Counterpart to Solidity's `int56` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 56 bits\n     */\n    function toInt56(int256 value) internal pure returns (int56 downcasted) {\n        downcasted = int56(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(56, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int48 from int256, reverting on\n     * overflow (when the input is less than smallest int48 or\n     * greater than largest int48).\n     *\n     * Counterpart to Solidity's `int48` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 48 bits\n     */\n    function toInt48(int256 value) internal pure returns (int48 downcasted) {\n        downcasted = int48(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(48, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int40 from int256, reverting on\n     * overflow (when the input is less than smallest int40 or\n     * greater than largest int40).\n     *\n     * Counterpart to Solidity's `int40` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 40 bits\n     */\n    function toInt40(int256 value) internal pure returns (int40 downcasted) {\n        downcasted = int40(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(40, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int32 from int256, reverting on\n     * overflow (when the input is less than smallest int32 or\n     * greater than largest int32).\n     *\n     * Counterpart to Solidity's `int32` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 32 bits\n     */\n    function toInt32(int256 value) internal pure returns (int32 downcasted) {\n        downcasted = int32(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(32, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int24 from int256, reverting on\n     * overflow (when the input is less than smallest int24 or\n     * greater than largest int24).\n     *\n     * Counterpart to Solidity's `int24` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 24 bits\n     */\n    function toInt24(int256 value) internal pure returns (int24 downcasted) {\n        downcasted = int24(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(24, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int16 from int256, reverting on\n     * overflow (when the input is less than smallest int16 or\n     * greater than largest int16).\n     *\n     * Counterpart to Solidity's `int16` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 16 bits\n     */\n    function toInt16(int256 value) internal pure returns (int16 downcasted) {\n        downcasted = int16(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(16, value);\n        }\n    }\n\n    /**\n     * @dev Returns the downcasted int8 from int256, reverting on\n     * overflow (when the input is less than smallest int8 or\n     * greater than largest int8).\n     *\n     * Counterpart to Solidity's `int8` operator.\n     *\n     * Requirements:\n     *\n     * - input must fit into 8 bits\n     */\n    function toInt8(int256 value) internal pure returns (int8 downcasted) {\n        downcasted = int8(value);\n        if (downcasted != value) {\n            revert SafeCastOverflowedIntDowncast(8, value);\n        }\n    }\n\n    /**\n     * @dev Converts an unsigned uint256 into a signed int256.\n     *\n     * Requirements:\n     *\n     * - input must be less than or equal to maxInt256.\n     */\n    function toInt256(uint256 value) internal pure returns (int256) {\n        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n        if (value > uint256(type(int256).max)) {\n            revert SafeCastOverflowedUintToInt(value);\n        }\n        return int256(value);\n    }\n\n    /**\n     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.\n     */\n    function toUint(bool b) internal pure returns (uint256 u) {\n        assembly (\"memory-safe\") {\n            u := iszero(iszero(b))\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Panic.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Helper library for emitting standardized panic codes.\n *\n * ```solidity\n * contract Example {\n *      using Panic for uint256;\n *\n *      // Use any of the declared internal constants\n *      function foo() { Panic.GENERIC.panic(); }\n *\n *      // Alternatively\n *      function foo() { Panic.panic(Panic.GENERIC); }\n * }\n * ```\n *\n * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].\n *\n * _Available since v5.1._\n */\n// slither-disable-next-line unused-state\nlibrary Panic {\n    /// @dev generic / unspecified error\n    uint256 internal constant GENERIC = 0x00;\n    /// @dev used by the assert() builtin\n    uint256 internal constant ASSERT = 0x01;\n    /// @dev arithmetic underflow or overflow\n    uint256 internal constant UNDER_OVERFLOW = 0x11;\n    /// @dev division or modulo by zero\n    uint256 internal constant DIVISION_BY_ZERO = 0x12;\n    /// @dev enum conversion error\n    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;\n    /// @dev invalid encoding in storage\n    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;\n    /// @dev empty array pop\n    uint256 internal constant EMPTY_ARRAY_POP = 0x31;\n    /// @dev array out of bounds access\n    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;\n    /// @dev resource error (too large allocation or too large array)\n    uint256 internal constant RESOURCE_ERROR = 0x41;\n    /// @dev calling invalid internal function\n    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;\n\n    /// @dev Reverts with a panic code. Recommended to use with\n    /// the internal constants with predefined codes.\n    function panic(uint256 code) internal pure {\n        assembly (\"memory-safe\") {\n            mstore(0x00, 0x4e487b71)\n            mstore(0x20, code)\n            revert(0x1c, 0x24)\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/Pausable.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)\n\npragma solidity ^0.8.20;\n\nimport {Context} from \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which allows children to implement an emergency stop\n * mechanism that can be triggered by an authorized account.\n *\n * This module is used through inheritance. It will make available the\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\n * the functions of your contract. Note that they will not be pausable by\n * simply including this module, only once the modifiers are put in place.\n */\nabstract contract Pausable is Context {\n    bool private _paused;\n\n    /**\n     * @dev Emitted when the pause is triggered by `account`.\n     */\n    event Paused(address account);\n\n    /**\n     * @dev Emitted when the pause is lifted by `account`.\n     */\n    event Unpaused(address account);\n\n    /**\n     * @dev The operation failed because the contract is paused.\n     */\n    error EnforcedPause();\n\n    /**\n     * @dev The operation failed because the contract is not paused.\n     */\n    error ExpectedPause();\n\n    /**\n     * @dev Initializes the contract in unpaused state.\n     */\n    constructor() {\n        _paused = false;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is not paused.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    modifier whenNotPaused() {\n        _requireNotPaused();\n        _;\n    }\n\n    /**\n     * @dev Modifier to make a function callable only when the contract is paused.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    modifier whenPaused() {\n        _requirePaused();\n        _;\n    }\n\n    /**\n     * @dev Returns true if the contract is paused, and false otherwise.\n     */\n    function paused() public view virtual returns (bool) {\n        return _paused;\n    }\n\n    /**\n     * @dev Throws if the contract is paused.\n     */\n    function _requireNotPaused() internal view virtual {\n        if (paused()) {\n            revert EnforcedPause();\n        }\n    }\n\n    /**\n     * @dev Throws if the contract is not paused.\n     */\n    function _requirePaused() internal view virtual {\n        if (!paused()) {\n            revert ExpectedPause();\n        }\n    }\n\n    /**\n     * @dev Triggers stopped state.\n     *\n     * Requirements:\n     *\n     * - The contract must not be paused.\n     */\n    function _pause() internal virtual whenNotPaused {\n        _paused = true;\n        emit Paused(_msgSender());\n    }\n\n    /**\n     * @dev Returns to normal state.\n     *\n     * Requirements:\n     *\n     * - The contract must be paused.\n     */\n    function _unpause() internal virtual whenPaused {\n        _paused = false;\n        emit Unpaused(_msgSender());\n    }\n}\n"},"@openzeppelin/contracts/utils/ReentrancyGuardTransient.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuardTransient.sol)\n\npragma solidity ^0.8.24;\n\nimport {TransientSlot} from \"./TransientSlot.sol\";\n\n/**\n * @dev Variant of {ReentrancyGuard} that uses transient storage.\n *\n * NOTE: This variant only works on networks where EIP-1153 is available.\n *\n * _Available since v5.1._\n */\nabstract contract ReentrancyGuardTransient {\n    using TransientSlot for *;\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ReentrancyGuard\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant REENTRANCY_GUARD_STORAGE =\n        0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        if (_reentrancyGuardEntered()) {\n            revert ReentrancyGuardReentrantCall();\n        }\n\n        // Any calls to nonReentrant after this point will fail\n        REENTRANCY_GUARD_STORAGE.asBoolean().tstore(true);\n    }\n\n    function _nonReentrantAfter() private {\n        REENTRANCY_GUARD_STORAGE.asBoolean().tstore(false);\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return REENTRANCY_GUARD_STORAGE.asBoolean().tload();\n    }\n}\n"},"@openzeppelin/contracts/utils/TransientSlot.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/TransientSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/TransientSlot.js.\n\npragma solidity ^0.8.24;\n\n/**\n * @dev Library for reading and writing value-types to specific transient storage slots.\n *\n * Transient slots are often used to store temporary values that are removed after the current transaction.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n *  * Example reading and writing values using transient storage:\n * ```solidity\n * contract Lock {\n *     using TransientSlot for *;\n *\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _LOCK_SLOT = 0xf4678858b2b588224636b8522b729e7722d32fc491da849ed75b3fdf3c84f542;\n *\n *     modifier locked() {\n *         require(!_LOCK_SLOT.asBoolean().tload());\n *\n *         _LOCK_SLOT.asBoolean().tstore(true);\n *         _;\n *         _LOCK_SLOT.asBoolean().tstore(false);\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary TransientSlot {\n    /**\n     * @dev UDVT that represent a slot holding a address.\n     */\n    type AddressSlot is bytes32;\n\n    /**\n     * @dev Cast an arbitrary slot to a AddressSlot.\n     */\n    function asAddress(bytes32 slot) internal pure returns (AddressSlot) {\n        return AddressSlot.wrap(slot);\n    }\n\n    /**\n     * @dev UDVT that represent a slot holding a bool.\n     */\n    type BooleanSlot is bytes32;\n\n    /**\n     * @dev Cast an arbitrary slot to a BooleanSlot.\n     */\n    function asBoolean(bytes32 slot) internal pure returns (BooleanSlot) {\n        return BooleanSlot.wrap(slot);\n    }\n\n    /**\n     * @dev UDVT that represent a slot holding a bytes32.\n     */\n    type Bytes32Slot is bytes32;\n\n    /**\n     * @dev Cast an arbitrary slot to a Bytes32Slot.\n     */\n    function asBytes32(bytes32 slot) internal pure returns (Bytes32Slot) {\n        return Bytes32Slot.wrap(slot);\n    }\n\n    /**\n     * @dev UDVT that represent a slot holding a uint256.\n     */\n    type Uint256Slot is bytes32;\n\n    /**\n     * @dev Cast an arbitrary slot to a Uint256Slot.\n     */\n    function asUint256(bytes32 slot) internal pure returns (Uint256Slot) {\n        return Uint256Slot.wrap(slot);\n    }\n\n    /**\n     * @dev UDVT that represent a slot holding a int256.\n     */\n    type Int256Slot is bytes32;\n\n    /**\n     * @dev Cast an arbitrary slot to a Int256Slot.\n     */\n    function asInt256(bytes32 slot) internal pure returns (Int256Slot) {\n        return Int256Slot.wrap(slot);\n    }\n\n    /**\n     * @dev Load the value held at location `slot` in transient storage.\n     */\n    function tload(AddressSlot slot) internal view returns (address value) {\n        assembly (\"memory-safe\") {\n            value := tload(slot)\n        }\n    }\n\n    /**\n     * @dev Store `value` at location `slot` in transient storage.\n     */\n    function tstore(AddressSlot slot, address value) internal {\n        assembly (\"memory-safe\") {\n            tstore(slot, value)\n        }\n    }\n\n    /**\n     * @dev Load the value held at location `slot` in transient storage.\n     */\n    function tload(BooleanSlot slot) internal view returns (bool value) {\n        assembly (\"memory-safe\") {\n            value := tload(slot)\n        }\n    }\n\n    /**\n     * @dev Store `value` at location `slot` in transient storage.\n     */\n    function tstore(BooleanSlot slot, bool value) internal {\n        assembly (\"memory-safe\") {\n            tstore(slot, value)\n        }\n    }\n\n    /**\n     * @dev Load the value held at location `slot` in transient storage.\n     */\n    function tload(Bytes32Slot slot) internal view returns (bytes32 value) {\n        assembly (\"memory-safe\") {\n            value := tload(slot)\n        }\n    }\n\n    /**\n     * @dev Store `value` at location `slot` in transient storage.\n     */\n    function tstore(Bytes32Slot slot, bytes32 value) internal {\n        assembly (\"memory-safe\") {\n            tstore(slot, value)\n        }\n    }\n\n    /**\n     * @dev Load the value held at location `slot` in transient storage.\n     */\n    function tload(Uint256Slot slot) internal view returns (uint256 value) {\n        assembly (\"memory-safe\") {\n            value := tload(slot)\n        }\n    }\n\n    /**\n     * @dev Store `value` at location `slot` in transient storage.\n     */\n    function tstore(Uint256Slot slot, uint256 value) internal {\n        assembly (\"memory-safe\") {\n            tstore(slot, value)\n        }\n    }\n\n    /**\n     * @dev Load the value held at location `slot` in transient storage.\n     */\n    function tload(Int256Slot slot) internal view returns (int256 value) {\n        assembly (\"memory-safe\") {\n            value := tload(slot)\n        }\n    }\n\n    /**\n     * @dev Store `value` at location `slot` in transient storage.\n     */\n    function tstore(Int256Slot slot, int256 value) internal {\n        assembly (\"memory-safe\") {\n            tstore(slot, value)\n        }\n    }\n}\n"},"contracts/base/BaseSBold.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.0;\n\nimport {ERC4626} from \"@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol\";\nimport {Ownable} from \"@openzeppelin/contracts/access/Ownable.sol\";\nimport {Pausable} from \"@openzeppelin/contracts/utils/Pausable.sol\";\nimport {ReentrancyGuardTransient} from \"@openzeppelin/contracts/utils/ReentrancyGuardTransient.sol\";\nimport {IStabilityPool} from \"../external/IStabilityPool.sol\";\nimport {IPriceOracle} from \"../interfaces/IPriceOracle.sol\";\nimport {ISBold} from \"../interfaces/ISBold.sol\";\nimport {ICommon} from \"../interfaces/ICommon.sol\";\nimport {Constants} from \"../libraries/helpers/Constants.sol\";\nimport {Common} from \"../libraries/Common.sol\";\nimport {TransientStorage} from \"../libraries/helpers/TransientStorage.sol\";\n\n/// @title sBold Protocol\n/// @notice The $sBOLD represents an ERC4626 yield-bearing token.\nabstract contract BaseSBold is ISBold, ICommon, ERC4626, ReentrancyGuardTransient, Pausable, Ownable {\n    /// @notice Data for stability pools.\n    SP[] public sps;\n    /// @notice The fee in basis points.\n    uint256 public feeBps;\n    /// @notice The fee applied over the swap in basis points.\n    uint256 public swapFeeBps;\n    /// @notice The reward for the `caller` applied over the swap in basis points.\n    uint256 public rewardBps;\n    /// @notice The maximum slippage tolerance on swap in basis points.\n    uint256 public maxSlippage;\n    /// @notice The maximum Coll value aggregated and owned.\n    uint256 public maxCollInBold;\n    /// @notice Price oracle instance.\n    IPriceOracle public priceOracle;\n    /// @notice Swap adapter instance.\n    address public swapAdapter;\n    /// @notice An address to which a fee amount in $BOLD is transferred.\n    address public vault;\n\n    /*//////////////////////////////////////////////////////////////\n                               CONSTRUCTOR\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Deploys sBold.\n    /// @param _sps The Stability Pools memory array.\n    /// @param _priceOracle The address of the price oracle adapter.\n    /// @param _vault The address of the vault for fee transfers.\n    constructor(SPConfig[] memory _sps, address _priceOracle, address _vault) Ownable(_msgSender()) {\n        _setSPs(_sps);\n        priceOracle = IPriceOracle(_priceOracle);\n        vault = _vault;\n    }\n\n    /// @dev Stores and loads collateral in $BOLD value in transient storage.\n    /// Operates with three values, the collateral in USD, in $BOLD and a flag.\n    modifier execCollateralOps() {\n        _checkAndStoreCollValueInBold();\n        _;\n        TransientStorage.switchOffCollInBoldFlag();\n    }\n\n    /// @dev Check for reentrancy on read functions.\n    modifier nonReentrantReadOnly() {\n        if (_reentrancyGuardEntered()) {\n            revert ReentrancyGuardReentrantCall();\n        }\n        _;\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                               SETTERS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Sets `priceOracle` address which will be used for price derivation.\n    /// @param _priceOracle The address of the price oracle.\n    function setPriceOracle(address _priceOracle) external onlyOwner {\n        Common.revertZeroAddress(_priceOracle);\n\n        priceOracle = IPriceOracle(_priceOracle);\n\n        emit PriceOracleSet(_priceOracle);\n    }\n\n    /// @notice Sets `vault` address to which fees will be transferred.\n    /// @param _vault The address of the vault.\n    function setVault(address _vault) external onlyOwner {\n        Common.revertZeroAddress(_vault);\n        if (_vault == asset() || _vault == address(this)) revert InvalidAddress();\n\n        vault = _vault;\n\n        emit VaultSet(_vault);\n    }\n\n    /// @notice Sets the fee in BPS.\n    /// @param _feeBps The fee in BPS.\n    /// @param _swapFeeBps The swap fee in BPS.\n    function setFees(uint256 _feeBps, uint256 _swapFeeBps) external onlyOwner {\n        if (_feeBps > Constants.BPS_MAX_DEPOSIT_FEE || _swapFeeBps > Constants.BPS_MAX_FEE)\n            revert InvalidConfiguration();\n\n        feeBps = _feeBps;\n        swapFeeBps = _swapFeeBps;\n\n        emit FeesSet(_feeBps, _swapFeeBps);\n    }\n\n    /// @notice Sets the reward in BPS.\n    /// @param _rewardBps The reward in BPS.\n    function setReward(uint256 _rewardBps) external onlyOwner {\n        if (_rewardBps > Constants.BPS_MAX_REWARD) revert InvalidConfiguration();\n\n        rewardBps = _rewardBps;\n\n        emit RewardSet(_rewardBps);\n    }\n\n    /// @notice Sets the maximum slippage tolerance in BPS.\n    /// @param _maxSlippage The maximum slippage tolerance in BPS.\n    function setMaxSlippage(uint256 _maxSlippage) external onlyOwner {\n        if (_maxSlippage > Constants.BPS_MAX_SLIPPAGE) revert InvalidConfiguration();\n\n        maxSlippage = _maxSlippage;\n\n        emit MaxSlippageSet(_maxSlippage);\n    }\n\n    /// @notice Sets the swap adapter address.\n    /// @param _swapAdapter The swap adapter address.\n    function setSwapAdapter(address _swapAdapter) external onlyOwner {\n        Common.revertZeroAddress(_swapAdapter);\n        if (_swapAdapter == asset()) revert InvalidAddress();\n        for (uint256 i = 0; i < sps.length; i++) {\n            if (_swapAdapter == sps[i].sp || _swapAdapter == sps[i].coll) revert InvalidAddress();\n        }\n\n        swapAdapter = _swapAdapter;\n\n        emit SwapAdapterSet(_swapAdapter);\n    }\n\n    /// @notice Sets the maximum Coll value aggregated and owned.\n    /// @param _maxCollInBold The maximum Coll value.\n    function setMaxCollInBold(uint256 _maxCollInBold) external onlyOwner {\n        if (_maxCollInBold == 0 || _maxCollInBold > Constants.MAX_COLL_IN_BOLD_UPPER_BOUND) {\n            revert InvalidConfiguration();\n        }\n\n        maxCollInBold = _maxCollInBold;\n\n        emit MaxCollValueSet(_maxCollInBold);\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                PAUSE\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Pauses contract.\n    function pause() external onlyOwner {\n        _pause();\n    }\n\n    /// @notice Unpauses contract.\n    function unpause() external onlyOwner {\n        _unpause();\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                INTERNAL\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Sets Stability Pools and Coll assets structures.\n    /// The total weight of all Stability Pools should be equal to `BPS_DENOMINATOR`.\n    /// Each Stability Pool Coll is derived from the pools themselves.\n    /// The decimal precision for each Coll is dynamically extracted.\n    /// @param _sps Address and weight of Stability Pools.\n    function _setSPs(SPConfig[] memory _sps) internal {\n        if (_sps.length == 0) revert InvalidSPLength();\n\n        uint256 totalWeight;\n        for (uint256 i = 0; i < _sps.length; i++) {\n            address spAddress = _sps[i].addr;\n            uint96 weight = _sps[i].weight;\n\n            // Verify input\n            Common.revertZeroAddress(spAddress);\n            if (weight == 0) revert ZeroWeight();\n            for (uint256 j = 0; j < _sps.length; j++) {\n                if (i != j && spAddress == _sps[j].addr) {\n                    revert DuplicateAddress();\n                }\n            }\n\n            // Update Storage related to SP\n            sps.push(SP({sp: spAddress, weight: weight, coll: address(IStabilityPool(spAddress).collToken())}));\n\n            totalWeight += weight;\n        }\n\n        if (totalWeight != Constants.BPS_DENOMINATOR) revert InvalidTotalWeight();\n    }\n\n    /// @notice Check and store collateral value in $BOLD if transient storage load is not enabled.\n    function _checkAndStoreCollValueInBold() internal virtual {}\n}\n"},"contracts/external/IBoldToken.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {IERC20Permit} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol\";\nimport {IERC5267} from \"@openzeppelin/contracts/interfaces/IERC5267.sol\";\n\ninterface IBoldToken is IERC20Metadata, IERC20Permit, IERC5267 {\n    function setBranchAddresses(\n        address _troveManagerAddress,\n        address _stabilityPoolAddress,\n        address _borrowerOperationsAddress,\n        address _activePoolAddress\n    ) external;\n\n    function setCollateralRegistry(address _collateralRegistryAddress) external;\n\n    function mint(address _account, uint256 _amount) external;\n\n    function burn(address _account, uint256 _amount) external;\n\n    function sendToPool(address _sender, address poolAddress, uint256 _amount) external;\n\n    function returnFromPool(address poolAddress, address user, uint256 _amount) external;\n}\n"},"contracts/external/IStabilityPool.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IBoldToken} from \"./IBoldToken.sol\";\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\n\n/*\n * The Stability Pool holds Bold tokens deposited by Stability Pool depositors.\n *\n * When a trove is liquidated, then depending on system conditions, some of its Bold debt gets offset with\n * Bold in the Stability Pool:  that is, the offset debt evaporates, and an equal amount of Bold tokens in the Stability Pool is burned.\n *\n * Thus, a liquidation causes each depositor to receive a Bold loss, in proportion to their deposit as a share of total deposits.\n * They also receive an Coll gain, as the collateral of the liquidated trove is distributed among Stability depositors,\n * in the same proportion.\n *\n * When a liquidation occurs, it depletes every deposit by the same fraction: for example, a liquidation that depletes 40%\n * of the total Bold in the Stability Pool, depletes 40% of each deposit.\n *\n * A deposit that has experienced a series of liquidations is termed a \"compounded deposit\": each liquidation depletes the deposit,\n * multiplying it by some factor in range ]0,1[\n *\n * Please see the implementation spec in the proof document, which closely follows on from the compounded deposit / Coll gain derivations:\n * https://github.com/liquity/liquity/blob/master/papers/Scalable_Reward_Distribution_with_Compounding_Stakes.pdf\n *\n */\ninterface IStabilityPool {\n    function collToken() external view returns (IERC20);\n\n    function boldToken() external view returns (IBoldToken);\n\n    /*  provideToSP():\n     * - Calculates depositor's Coll gain\n     * - Calculates the compounded deposit\n     * - Increases deposit, and takes new snapshots of accumulators P and S\n     * - Sends depositor's accumulated Coll gains to depositor\n     */\n    function provideToSP(uint256 _amount, bool _doClaim) external;\n\n    /*  withdrawFromSP():\n     * - Calculates depositor's Coll gain\n     * - Calculates the compounded deposit\n     * - Sends the requested BOLD withdrawal to depositor\n     * - (If _amount > userDeposit, the user withdraws all of their compounded deposit)\n     * - Decreases deposit by withdrawn amount and takes new snapshots of accumulators P and S\n     */\n    function withdrawFromSP(uint256 _amount, bool doClaim) external;\n\n    /*\n     * Initial checks:\n     * - Caller is TroveManager\n     * ---\n     * Cancels out the specified debt against the Bold contained in the Stability Pool (as far as possible)\n     * and transfers the Trove's collateral from ActivePool to StabilityPool.\n     * Only called by liquidation functions in the TroveManager.\n     */\n    function offset(uint256 _debt, uint256 _coll) external;\n\n    function deposits(address _depositor) external view returns (uint256 initialValue);\n\n    function stashedColl(address _depositor) external view returns (uint256);\n\n    /*\n     * Returns the total amount of Coll held by the pool, accounted in an internal variable instead of `balance`,\n     * to exclude edge cases like Coll received from a self-destruct.\n     */\n    function getCollBalance() external view returns (uint256);\n\n    /*\n     * Returns Bold held in the pool. Changes when users deposit/withdraw, and when Trove debt is offset.\n     */\n    function getTotalBoldDeposits() external view returns (uint256);\n\n    function getYieldGainsOwed() external view returns (uint256);\n\n    /*\n     * Calculates the Coll gain earned by the deposit since its last snapshots were taken.\n     */\n    function getDepositorCollGain(address _depositor) external view returns (uint256);\n\n    /*\n     * Calculates the BOLD yield gain earned by the deposit since its last snapshots were taken.\n     */\n    function getDepositorYieldGain(address _depositor) external view returns (uint256);\n\n    /*\n     * Calculates what `getDepositorYieldGain` will be if interest is minted now.\n     */\n    function getDepositorYieldGainWithPending(address _depositor) external view returns (uint256);\n\n    /*\n     * Return the user's compounded deposit.\n     */\n    function getCompoundedBoldDeposit(address _depositor) external view returns (uint256);\n\n    function epochToScaleToS(uint128 _epoch, uint128 _scale) external view returns (uint256);\n\n    function epochToScaleToB(uint128 _epoch, uint128 _scale) external view returns (uint256);\n\n    function P() external view returns (uint256);\n\n    function currentScale() external view returns (uint128);\n\n    function currentEpoch() external view returns (uint128);\n}\n"},"contracts/interfaces/ICommon.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\n/// @title IPriceOracle\n\n/// @notice PriceOracle interface.\ninterface ICommon {\n    /*//////////////////////////////////////////////////////////////\n                                 ERRORS\n    //////////////////////////////////////////////////////////////*/\n\n    error InvalidAddress();\n}\n"},"contracts/interfaces/IPriceOracle.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\n/// @title IPriceOracle\n/// @notice PriceOracle interface.\ninterface IPriceOracle {\n    /*//////////////////////////////////////////////////////////////\n                                 ERRORS\n    //////////////////////////////////////////////////////////////*/\n\n    error InvalidMaxStalenessUpperBound();\n\n    error InvalidMaxStaleness();\n\n    error InvalidMaxConfWidthLowerBound();\n\n    error InvalidFeed();\n\n    error InvalidBaseDecimals();\n\n    error TooStalePrice();\n\n    error TooAheadPrice();\n\n    error InvalidPrice();\n\n    error InvalidPriceExponent();\n\n    error DuplicateFeed();\n\n    /*//////////////////////////////////////////////////////////////\n                                 FUNCTIONS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Check if the `base` token is supported.\n    /// @param base The token that is being priced.\n    /// @return The boolean if the token is supported.\n    function isBaseSupported(address base) external view returns (bool);\n\n    /// @notice Fetch the latest price and transform it to a quote.\n    /// @param inAmount The amount of `base` to convert.\n    /// @return outAmount The amount of `quote` that is equivalent to `inAmount` of `base`.\n    function getQuote(uint256 inAmount, address base) external view returns (uint256 outAmount);\n}\n"},"contracts/interfaces/ISBold.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\ninterface ISBold {\n    /*//////////////////////////////////////////////////////////////\n                                STRUCTS\n    //////////////////////////////////////////////////////////////*/\n\n    struct SPConfig {\n        address addr;\n        uint96 weight;\n    }\n\n    struct SP {\n        address sp;\n        uint96 weight;\n        address coll;\n    }\n\n    struct CollBalance {\n        address addr;\n        uint256 balance;\n    }\n\n    struct SwapDataWithColl {\n        address addr;\n        uint256 balance;\n        uint256 collInBold;\n        bytes data;\n    }\n\n    struct SwapData {\n        address sp;\n        uint256 balance;\n        bytes data;\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                 ERRORS\n    //////////////////////////////////////////////////////////////*/\n\n    error InvalidConfiguration();\n\n    error ExecutionFailed(bytes data);\n\n    error CollOverLimit();\n\n    error InsufficientAmount(uint256 amountOut);\n\n    error InvalidDataArray();\n\n    error InvalidSPLength();\n\n    error ZeroWeight();\n\n    error InvalidTotalWeight();\n\n    error DuplicateAddress();\n\n    /*//////////////////////////////////////////////////////////////\n                                 EVENTS\n    //////////////////////////////////////////////////////////////*/\n\n    event PriceOracleSet(address addr);\n\n    event VaultSet(address account);\n\n    event FeesSet(uint256 feeBps, uint256 swapFeeBps);\n\n    event MaxCollValueSet(uint256 value);\n\n    event SwapAdapterSet(address addr);\n\n    event RewardSet(uint256 value);\n\n    event MaxSlippageSet(uint256 value);\n\n    event Swap(\n        address indexed adapter,\n        address indexed src,\n        address indexed dst,\n        uint256 amountIn,\n        uint256 amountOut,\n        uint256 minOut\n    );\n\n    event Rebalance(SPConfig[] _sps);\n\n    /*//////////////////////////////////////////////////////////////\n                                 FUNCTIONS\n    //////////////////////////////////////////////////////////////*/\n\n    function setPriceOracle(address _priceOracle) external;\n\n    function setVault(address _vault) external;\n}\n"},"contracts/libraries/Common.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {ICommon} from \"../interfaces/ICommon.sol\";\n\nlibrary Common {\n    function revertZeroAddress(address _address) internal pure {\n        if (_address == address(0)) revert ICommon.InvalidAddress();\n    }\n}\n"},"contracts/libraries/helpers/Constants.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\n/// @title Constants\n/// @notice Presents common constants.\nlibrary Constants {\n    /// @notice The maximum value in BPS.\n    uint256 internal constant BPS_DENOMINATOR = 10_000;\n    /// @notice The maximum fee on deposit in BPS.\n    uint256 internal constant BPS_MAX_DEPOSIT_FEE = 500;\n    /// @notice The maximum fee in BPS.\n    uint256 internal constant BPS_MAX_FEE = 250;\n    /// @notice The minimum reward in BPS.\n    uint256 internal constant BPS_MAX_REWARD = 250;\n    /// @notice The upper boundary for maximum slippage tolerance in BPS.\n    uint256 internal constant BPS_MAX_SLIPPAGE = 500;\n    /// @notice The upper boundary for maximum collateral denominated in $BOLD.\n    uint256 internal constant MAX_COLL_IN_BOLD_UPPER_BOUND = 1_000_000e18;\n    /// @notice The price precision returned from oracle.\n    uint256 internal constant ORACLE_PRICE_PRECISION = 18;\n}\n"},"contracts/libraries/helpers/Decimals.sol":{"content":"// SPDX-License-Identifier: MIT\npragma solidity ^0.8.0;\n\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\n\n/// @title Decimals\n/// @notice Utility library for deriving decimals from assets.\nlibrary Decimals {\n    /// @dev Returns decimals for asset on success. Defaults to 18 in case the attempt failed in some way.\n    function getDecimals(address asset) internal view returns (uint8) {\n        (bool success, uint8 decimals) = tryGetDecimals(asset);\n\n        return success ? decimals : 18;\n    }\n\n    /// @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.\n    function tryGetDecimals(address asset) internal view returns (bool, uint8) {\n        (bool success, bytes memory encodedDecimals) = asset.staticcall(abi.encodeCall(IERC20Metadata.decimals, ()));\n\n        if (success && encodedDecimals.length >= 32) {\n            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));\n            if (returnedDecimals <= type(uint8).max) {\n                return (true, uint8(returnedDecimals));\n            }\n        }\n\n        return (false, 0);\n    }\n}\n"},"contracts/libraries/helpers/TransientStorage.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.24;\n\nimport {TransientSlot} from \"@openzeppelin/contracts/utils/TransientSlot.sol\";\n\n/// @title Transient storage\n/// @notice Library for loading and storing data in transient storage.\nlibrary TransientStorage {\n    using TransientSlot for *;\n\n    // keccak256(abi.encode(uint256(keccak256(\"sBold.collateralInBold\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 internal constant COLLATERAL_IN_BOLD_STORAGE =\n        0x93de9a8576a62ce59fcb637d8053d0e5fadcf7d26694489a7981d83007528a00;\n    // keccak256(abi.encode(uint256(keccak256(\"sBold.collateralValue\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 internal constant COLLATERAL_VALUE_STORAGE =\n        0xb9119c9d507ab94e0f4429b4c7bbf0463ef7a3523c74e225b6641cfb04e67a00;\n    // keccak256(abi.encode(uint256(keccak256(\"sBold.collateralInBoldFlag\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 internal constant COLLATERALS_FLAG_STORAGE =\n        0x7f4a0d96299dae48c93382764b8799886298548aad0eae1e31f8351df5706900;\n\n    /// @dev Stores the collateral values in transient storage.\n    /// @param collValue The collateral in USD value to be stored.\n    /// @param collInBold The collateral in $BOLD value to be stored.\n    function storeCollValues(uint256 collValue, uint256 collInBold) internal {\n        // Transient store for collateral in $BOLD flag\n        COLLATERALS_FLAG_STORAGE.asBoolean().tstore(true);\n        // Transient store for collateral in USD\n        COLLATERAL_VALUE_STORAGE.asUint256().tstore(collValue);\n        // Transient store for collateral in $BOLD\n        COLLATERAL_IN_BOLD_STORAGE.asUint256().tstore(collInBold);\n    }\n\n    /// @dev Clears the collateral in $BOLD value from transient storage.\n    function switchOffCollInBoldFlag() internal {\n        COLLATERALS_FLAG_STORAGE.asBoolean().tstore(false);\n    }\n\n    /// @dev Loads the collaterals flag from transient storage.\n    /// @return The boolean flag.\n    function loadCollsFlag() internal view returns (bool) {\n        return COLLATERALS_FLAG_STORAGE.asBoolean().tload();\n    }\n\n    /// @dev Loads the collateral in $BOLD value from transient storage.\n    /// @return The value.\n    function loadCollInBold() internal view returns (uint256) {\n        return COLLATERAL_IN_BOLD_STORAGE.asUint256().tload();\n    }\n\n    /// @dev Loads the collateral in USD value from transient storage.\n    /// @return The value.\n    function loadCollValue() internal view returns (uint256) {\n        return COLLATERAL_VALUE_STORAGE.asUint256().tload();\n    }\n}\n"},"contracts/libraries/logic/QuoteLogic.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.0;\n\nimport {ISBold} from \"../../interfaces/ISBold.sol\";\nimport {IPriceOracle} from \"../../interfaces/IPriceOracle.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {Constants} from \"../helpers/Constants.sol\";\n\n/// @title QuoteLogic\n/// @notice Logic for quotes derivation.\nlibrary QuoteLogic {\n    using Math for uint256;\n\n    /// @param oracle The oracle to use for getting the quote.\n    /// @param balances The collateral balance structs.\n    /// @param _revert If the getQuote should revert or not.\n    /// @return success The success result of this function.\n    /// @return amount The aggregated amount of collateral in USD.\n    function getAggregatedQuote(\n        IPriceOracle oracle,\n        ISBold.CollBalance[] memory balances,\n        bool _revert\n    ) internal view returns (bool success, uint256 amount) {\n        for (uint256 i = 0; i < balances.length; i++) {\n            if (balances[i].balance == 0) continue;\n\n            try oracle.getQuote(balances[i].balance, balances[i].addr) returns (uint256 amount_) {\n                amount += amount_;\n            } catch (bytes memory data) {\n                if (_revert) revert(string(data));\n\n                return (false, amount);\n            }\n        }\n\n        return (true, amount);\n    }\n\n    /// @param oracle The oracle to use for getting the quote.\n    /// @param bold The address of $BOLD.\n    /// @param coll The address of the collateral.\n    /// @param balance The balance to return quote for.\n    /// @return amount The quote amount of collateral in $BOLD.\n    function getInBoldQuote(\n        IPriceOracle oracle,\n        address bold,\n        address coll,\n        uint256 balance,\n        uint8 decimals\n    ) internal view returns (uint256) {\n        // Get collateral value in USD\n        uint256 collQuote = oracle.getQuote(balance, coll);\n        // Get $BOLD value in USD\n        uint256 boldUnitQuote = oracle.getQuote(10 ** decimals, bold);\n        // Calculate 1 $BOLD * `n` collateral\n        return collQuote.mulDiv(10 ** Constants.ORACLE_PRICE_PRECISION, boldUnitQuote);\n    }\n}\n"},"contracts/libraries/logic/SpLogic.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.0;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport {IStabilityPool} from \"../../external/IStabilityPool.sol\";\nimport {ISBold} from \"../../interfaces/ISBold.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {Constants} from \"../../libraries/helpers/Constants.sol\";\n\n/// @title SpLogic\n/// @notice Manages liquidity in Stability Pools.\nlibrary SpLogic {\n    using Math for uint256;\n\n    /// @notice Provides $BOLD to SPs, based on the weight of each pool.\n    /// @param sps The SPs to provide $BOLD to.\n    /// @param assets The $BOLD amount.\n    function provideToSP(ISBold.SP[] memory sps, uint256 assets) internal {\n        for (uint256 i = 0; i < sps.length; i++) {\n            ISBold.SP memory sp = sps[i];\n            // Calculate amount for SP, based on the specified weight\n            uint256 amount = assets.mulDiv(sp.weight, Constants.BPS_DENOMINATOR);\n            if (amount > 0) {\n                // Provide amount to SP (accumulated gains are not transferred).\n                IStabilityPool(sp.sp).provideToSP(amount, false);\n            }\n        }\n    }\n\n    /// @notice Withdraws $BOLD from SPs.\n    /// @param sps The SPs to withdraw $BOLD from.\n    /// @param bold The $BOLD instance.\n    /// @param decimals The $BOLD decimals.\n    /// @param assets The $BOLD assets.\n    /// @param shouldProvide Should the withdraw provide leftover assets to current pools\n    function withdrawFromSP(\n        ISBold.SP[] memory sps,\n        IERC20 bold,\n        uint8 decimals,\n        uint256 assets,\n        bool shouldProvide\n    ) internal {\n        for (uint256 i = 0; i < sps.length; i++) {\n            IStabilityPool sp = IStabilityPool(sps[i].sp);\n            // Get compounded $BOLD amount from SP\n            uint256 amountCompoundedFromSp = sp.getCompoundedBoldDeposit(address(this));\n            // Get pending yield gain in $BOLD amount from SP\n            uint256 amountPendingFromSp = sp.getDepositorYieldGainWithPending(address(this));\n\n            if (amountCompoundedFromSp == 0 && amountPendingFromSp == 0) continue;\n            // Withdraw amount from SP (accumulated gains are transferred).\n            sp.withdrawFromSP(amountCompoundedFromSp, true);\n        }\n\n        uint256 balanceAfter = bold.balanceOf(address(this));\n        uint256 balanceToProvide = balanceAfter - assets;\n        uint256 deadShare = 10 ** decimals;\n\n        if (balanceToProvide > deadShare) {\n            // Provide the accumulated asset amount back to SPs.\n            if (shouldProvide) provideToSP(sps, balanceToProvide - deadShare);\n        }\n    }\n\n    /// @notice Aggregates $BOLD assets from each pool and returns the total holdings.\n    /// @param sps The SPs to get $BOLD from.\n    /// @param bold The $BOLD address.\n    /// @return amount The aggregated compounded $BOLD deposits.\n    function getBoldAssets(ISBold.SP[] memory sps, IERC20 bold) internal view returns (uint256 amount) {\n        for (uint256 i = 0; i < sps.length; i++) {\n            // Add $BOLD compounded deposits from each SP\n            amount += _getBoldAssetsSP(sps[i].sp);\n        }\n        // Add $BOLD internal balance\n        amount += bold.balanceOf(address(this));\n    }\n\n    /// @notice Aggregates collateral assets from each pool and returns an array with collateral assets structures.\n    /// @param sps The SPs to get collateral from.\n    /// @param onlyInternal The flag used to aggregate only internal balances.\n    /// @return collBalances The aggregated collateral structs containing address and balance.\n    function getCollBalances(\n        ISBold.SP[] memory sps,\n        bool onlyInternal\n    ) internal view returns (ISBold.CollBalance[] memory collBalances) {\n        collBalances = new ISBold.CollBalance[](sps.length);\n\n        for (uint256 i = 0; i < sps.length; i++) {\n            collBalances[i] = _getCollBalanceSP(sps[i], onlyInternal);\n        }\n    }\n\n    /// @notice Returns $BOLD assets from SP.\n    /// @param _sp The SP address.\n    /// @return The aggregated compounded $BOLD deposit from SP.\n    function _getBoldAssetsSP(address _sp) internal view returns (uint256) {\n        IStabilityPool sp = IStabilityPool(_sp);\n        // Accounted yield gains from deposits\n        uint256 compoundedBold = sp.getCompoundedBoldDeposit(address(this));\n        // Pending yield gains from deposits\n        uint256 pendingYield = sp.getDepositorYieldGainWithPending(address(this));\n\n        return compoundedBold + pendingYield;\n    }\n\n    /// @notice Returns collateral assets structure from SP.\n    /// @param _sp The SP address.\n    /// @param _onlyInternal The flag used to aggregate only internal balances.\n    /// @return collBalance The collateral struct containing address and balance from SP.\n    function _getCollBalanceSP(\n        ISBold.SP memory _sp,\n        bool _onlyInternal\n    ) internal view returns (ISBold.CollBalance memory) {\n        // Get collateral balance in contract\n        uint256 collInternal = IERC20(_sp.coll).balanceOf(address(this));\n        // Return only internal collateral holdings\n        if (_onlyInternal) return ISBold.CollBalance({addr: _sp.coll, balance: collInternal});\n        // Get collateral accumulated amounts\n        uint256 collAccumulatedGains = IStabilityPool(_sp.sp).getDepositorCollGain(address(this));\n        // Get collateral accumulated stashed amounts\n        uint256 collAccumulatedStashedGains = IStabilityPool(_sp.sp).stashedColl(address(this));\n        // Calculate total amount\n        uint256 totalBalance = collAccumulatedGains + collAccumulatedStashedGains + collInternal;\n\n        return ISBold.CollBalance({addr: _sp.coll, balance: totalBalance});\n    }\n}\n"},"contracts/libraries/logic/SwapLogic.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.0;\n\nimport {ERC20, IERC20} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport {ISBold} from \"../../interfaces/ISBold.sol\";\nimport {IPriceOracle} from \"../../interfaces/IPriceOracle.sol\";\nimport {IStabilityPool} from \"../../external/IStabilityPool.sol\";\nimport {Constants} from \"../../libraries/helpers/Constants.sol\";\nimport {Decimals} from \"../../libraries/helpers/Decimals.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {QuoteLogic} from \"./QuoteLogic.sol\";\nimport {SpLogic} from \"./SpLogic.sol\";\n\n/// @title SwapLogic\n/// @notice Logic for swap execution.\nlibrary SwapLogic {\n    using Math for uint256;\n\n    /// @notice Swaps each SP collateral for $BOLD and returns total swapped amount.\n    /// @param dst The unit in which the `src` is swapped.\n    /// @param adapter The adapter to use to execute swap\n    /// @param swapData The swap data.\n    /// @param maxSlippage The minimum amount to receive after the swap.\n    /// @return amount The quote amount with subtracted fees.\n    function swap(\n        address dst,\n        address adapter,\n        ISBold.SwapDataWithColl[] memory swapData,\n        uint256 maxSlippage\n    ) internal returns (uint256 amount) {\n        // Execute swap for each Coll\n        for (uint256 i = 0; i < swapData.length; i++) {\n            if (swapData[i].balance == 0) continue;\n            // Calculate minimum amount out in $BOLD\n            uint256 minOut = calcMinOut(swapData[i].collInBold, maxSlippage);\n            // Swap `src` for `bold`\n            uint256 amountOut = _execute(adapter, swapData[i].addr, dst, swapData[i].balance, minOut, swapData[i].data);\n            // Aggregate total amount of $BOLD received after swap\n            amount += amountOut;\n            // Emit on each swap\n            emit ISBold.Swap(adapter, swapData[i].addr, dst, swapData[i].balance, amountOut, minOut);\n        }\n    }\n\n    /// @notice Prepare swap data and claim collateral from protocol for each provided SP.\n    /// @param bold Address of the underlying asset of the protocol.\n    /// @param priceOracle Address of the price oracle.\n    /// @param sps The available SPs within the protocol.\n    /// @param swapData Input data for swap.\n    /// @return swapDataWithColl Prepared data for swap.\n    function prepareSwap(\n        address bold,\n        IPriceOracle priceOracle,\n        ISBold.SP[] memory sps,\n        ISBold.SwapData[] memory swapData\n    ) internal returns (ISBold.SwapDataWithColl[] memory swapDataWithColl) {\n        if (swapData.length > sps.length || swapData.length == 0) {\n            revert ISBold.InvalidDataArray();\n        }\n\n        swapDataWithColl = new ISBold.SwapDataWithColl[](swapData.length);\n\n        // Cycle through the input list of SP data for swap and find matching available SPs in protocol.\n        for (uint256 i = 0; i < swapData.length; i++) {\n            for (uint256 j = 0; j < sps.length; j++) {\n                if (sps[j].sp == swapData[i].sp) {\n                    // Claim collateral.\n                    IStabilityPool(sps[j].sp).withdrawFromSP(0, true);\n\n                    // If the input balance is not equal to the maximum claimed from SPs, the collateral will stay idle in this contract,\n                    // until next swap utilizes the funds.\n                    uint256 currentBalance = SpLogic._getCollBalanceSP(sps[j], true).balance;\n                    uint256 balance = currentBalance < swapData[i].balance ? currentBalance : swapData[i].balance;\n\n                    // Get collateral in $BOLD.\n                    uint256 collInBold = QuoteLogic.getInBoldQuote(\n                        priceOracle,\n                        bold,\n                        sps[j].coll,\n                        balance,\n                        ERC20(bold).decimals()\n                    );\n                    // Prepare data for swap by including details regarding collateral.\n                    swapDataWithColl[i] = ISBold.SwapDataWithColl({\n                        addr: sps[j].coll,\n                        balance: balance,\n                        collInBold: collInBold,\n                        data: swapData[i].data\n                    });\n                }\n            }\n\n            // Revert if input SP address is not matching one of current SPs.\n            if (swapDataWithColl[i].addr == address(0)) revert ISBold.InvalidDataArray();\n        }\n    }\n\n    /// @notice Calculates minimum amount to be returned, based on the maximum slippage set.\n    /// @param amount The amount to be swapped.\n    /// @param maxSlippage The maximum slippage tolerance on swap in basis points.\n    /// @return amount The amount returned by swap adapter after fees.\n    function calcMinOut(uint256 amount, uint256 maxSlippage) internal pure returns (uint256) {\n        return amount - amount.mulDiv(maxSlippage, Constants.BPS_DENOMINATOR);\n    }\n\n    /// @notice Deducts swap fee in BPS and reward for `caller` in BPS.\n    /// @param amountOut The amount returned by swap adapter before fees.\n    /// @param swapFeeBps The fee applied over the swap in basis points.\n    /// @param rewardBps The reward for the `caller` applied over the swap in basis points.\n    function applyFees(\n        uint256 amountOut,\n        uint256 swapFeeBps,\n        uint256 rewardBps\n    ) internal pure returns (uint256, uint256, uint256) {\n        uint256 fee = amountOut.mulDiv(swapFeeBps, Constants.BPS_DENOMINATOR);\n        uint256 reward = amountOut.mulDiv(rewardBps, Constants.BPS_DENOMINATOR);\n        return (amountOut - fee - reward, fee, reward);\n    }\n\n    /// @notice Executes `call()` to swap `inAmount` of `src` token to `dst`.\n    /// @param _src The unit that is swapped.\n    /// @param _dst The unit in which the `src` is swapped.\n    /// @param _inAmount The amount of `base` to be swapped.\n    /// @param _minOut The minimum amount to receive after the swap.\n    /// @param _swapData The swap data for 1inch router.\n    function _execute(\n        address _adapter,\n        address _src,\n        address _dst,\n        uint256 _inAmount,\n        uint256 _minOut,\n        bytes memory _swapData\n    ) private returns (uint256) {\n        IERC20 dst = IERC20(_dst);\n        // Get balance before the swap\n        uint256 balance0 = dst.balanceOf(address(this));\n        // Approve `_inAmount` for `adapter`\n        IERC20(_src).approve(_adapter, _inAmount);\n        // Execute swap\n        (bool success, bytes memory data) = _adapter.call(_swapData);\n        // Revert on failed swap\n        if (!success) revert ISBold.ExecutionFailed(data);\n        // Get balance after the swap\n        uint256 balance1 = dst.balanceOf(address(this));\n        // Get the amount received\n        uint256 amountOut = balance1 - balance0;\n        // Check if the amount received is equal or higher to the minimum\n        if (amountOut < _minOut) revert ISBold.InsufficientAmount(amountOut);\n        // Return decoded data\n        return amountOut;\n    }\n}\n"},"contracts/sBold.sol":{"content":"// SPDX-License-Identifier: BUSL-1.1\npragma solidity ^0.8.0;\n\nimport {ERC20, IERC20} from \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport {ERC4626} from \"@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol\";\nimport {Math} from \"@openzeppelin/contracts/utils/math/Math.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {BaseSBold} from \"./base/BaseSBold.sol\";\nimport {SpLogic} from \"./libraries/logic/SpLogic.sol\";\nimport {SwapLogic} from \"./libraries/logic/SwapLogic.sol\";\nimport {QuoteLogic} from \"./libraries/logic/QuoteLogic.sol\";\nimport {Constants} from \"./libraries/helpers/Constants.sol\";\nimport {Decimals} from \"./libraries/helpers/Decimals.sol\";\nimport {TransientStorage} from \"./libraries/helpers/TransientStorage.sol\";\n\n/// @title sBold Protocol\n/// @notice The $BOLD ERC4626 yield-bearing token.\ncontract sBold is BaseSBold {\n    using Math for uint256;\n\n    /// @notice Deploys sBold.\n    /// @param _asset The address of the $BOLD instance.\n    /// @param _name The name of `this` contract.\n    /// @param _symbol The symbol of `this` contract.\n    /// @param _sps The Stability Pools memory array.\n    /// @param _priceOracle The address of the price oracle adapter.\n    /// @param _vault The address of the vault for fee transfers.\n    constructor(\n        address _asset,\n        string memory _name,\n        string memory _symbol,\n        SPConfig[] memory _sps,\n        address _priceOracle,\n        address _vault\n    ) ERC4626(ERC20(_asset)) ERC20(_name, _symbol) BaseSBold(_sps, _priceOracle, _vault) {\n        super.deposit(10 ** decimals(), address(this));\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                 LOGIC\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Deposits $BOLD in SP and mints corresponding $sBOLD.\n    /// @param assets The amount of assets to deposit + fee to collect.\n    /// @param receiver The address to mint the shares to.\n    /// @return The amount of shares.\n    function deposit(\n        uint256 assets,\n        address receiver\n    ) public override whenNotPaused nonReentrant execCollateralOps returns (uint256) {\n        uint256 maxAssets = _maxDeposit(receiver);\n        if (assets > maxAssets) {\n            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);\n        }\n\n        uint256 fee = _feeOnTotal(assets, feeBps);\n\n        uint256 shares = super.previewDeposit(assets - fee);\n\n        _deposit(_msgSender(), receiver, assets, shares);\n\n        if (fee > 0) SafeERC20.safeTransfer(IERC20(asset()), vault, fee);\n\n        SpLogic.provideToSP(sps, assets - fee);\n\n        return shares;\n    }\n\n    /// @notice Mints shares of $sBOLD and provides corresponding $BOLD to SP.\n    /// @param shares The amount of shares to mint.\n    /// @param receiver The address to send the shares to.\n    /// @return The amount of assets.\n    function mint(\n        uint256 shares,\n        address receiver\n    ) public override whenNotPaused nonReentrant execCollateralOps returns (uint256) {\n        uint256 maxShares = _maxMint(receiver);\n        if (shares > maxShares) {\n            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);\n        }\n\n        uint256 assets = super.previewMint(shares);\n\n        uint256 fee = _feeOnRaw(assets, feeBps);\n\n        _deposit(_msgSender(), receiver, assets + fee, shares);\n\n        if (fee > 0) SafeERC20.safeTransfer(IERC20(asset()), vault, fee);\n\n        SpLogic.provideToSP(sps, assets);\n\n        return assets + fee;\n    }\n\n    /// @notice Redeems shares of $sBOLD in $BOLD and burns $sBOLD.\n    /// @param shares The amount of shares to redeem.\n    /// @param receiver The address to send the assets to.\n    /// @param owner The owner of the shares.\n    /// @return The amount of assets.\n    function redeem(\n        uint256 shares,\n        address receiver,\n        address owner\n    ) public override whenNotPaused nonReentrant execCollateralOps returns (uint256) {\n        uint256 maxShares = _maxRedeem(owner);\n        if (shares > maxShares) {\n            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);\n        }\n\n        uint256 assets = super.previewRedeem(shares);\n\n        SpLogic.withdrawFromSP(sps, IERC20(asset()), decimals(), assets, true);\n\n        _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n        return assets;\n    }\n\n    /// @notice Withdraws assets $BOLD from the SP and burns $sBOLD.\n    /// @param assets The amount of assets to withdraw.\n    /// @param receiver The address to send the shares to.\n    /// @param owner The owner of the shares.\n    /// @return The amount of shares.\n    function withdraw(\n        uint256 assets,\n        address receiver,\n        address owner\n    ) public override whenNotPaused nonReentrant execCollateralOps returns (uint256) {\n        uint256 maxAssets = _maxWithdraw(owner);\n        if (assets > maxAssets) {\n            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);\n        }\n\n        uint256 shares = super.previewWithdraw(assets);\n\n        SpLogic.withdrawFromSP(sps, IERC20(asset()), decimals(), assets, true);\n\n        _withdraw(_msgSender(), receiver, owner, assets, shares);\n\n        return shares;\n    }\n\n    /// @notice Swaps collateral balances to $BOLD.\n    /// @param swapData The swap data.\n    /// @param receiver The reward receiver.\n    function swap(SwapData[] memory swapData, address receiver) public whenNotPaused nonReentrant {\n        address bold = asset();\n\n        // Prepare swap data and claim collateral.\n        SwapDataWithColl[] memory swapDataWithColl = SwapLogic.prepareSwap(bold, priceOracle, sps, swapData);\n        // Execute swaps for each collateral to $BOLD\n        uint256 assets = SwapLogic.swap(bold, swapAdapter, swapDataWithColl, maxSlippage);\n\n        (, uint256 swapFee, uint256 reward) = SwapLogic.applyFees(assets, swapFeeBps, rewardBps);\n\n        IERC20 iBold = IERC20(bold);\n\n        if (swapFee > 0) SafeERC20.safeTransfer(iBold, vault, swapFee);\n        if (reward > 0) SafeERC20.safeTransfer(iBold, receiver, reward);\n\n        uint256 assetsInternal = ERC20(bold).balanceOf(address(this));\n        uint256 deadShareAmount = 10 ** decimals();\n\n        if (assetsInternal > deadShareAmount) {\n            SpLogic.provideToSP(sps, assetsInternal - deadShareAmount);\n        }\n    }\n\n    /// @notice This function is able to both re-balance in terms of weights and change entirely current SPs.\n    /// @param _sps The Stability Pools memory array.\n    /// @param _swapData The swap data.\n    function rebalanceSPs(SPConfig[] calldata _sps, SwapData[] memory _swapData) external onlyOwner nonReentrant {\n        address bold = asset();\n\n        // Prepare swap data and claim collateral.\n        SwapDataWithColl[] memory swapDataWithColl = SwapLogic.prepareSwap(bold, priceOracle, sps, _swapData);\n        // Execute swaps for each collateral to $BOLD.\n        SwapLogic.swap(bold, swapAdapter, swapDataWithColl, maxSlippage);\n\n        _checkCollHealth(true);\n\n        uint256 boldAmount;\n        for (uint256 i = 0; i < sps.length; i++) {\n            // Add $BOLD compounded deposits from each SP\n            boldAmount += SpLogic._getBoldAssetsSP(sps[i].sp);\n        }\n\n        // Withdraw all assets from current SPs.\n        SpLogic.withdrawFromSP(sps, IERC20(bold), decimals(), boldAmount, false);\n\n        // Sanitize\n        delete sps;\n        // Set new SPs.\n        _setSPs(_sps);\n\n        uint256 assetsInternal = ERC20(bold).balanceOf(address(this));\n        uint256 deadShareAmount = 10 ** decimals();\n\n        if (assetsInternal > deadShareAmount) {\n            // Provide all assets to new SPs.\n            SpLogic.provideToSP(sps, assetsInternal - deadShareAmount);\n        }\n\n        emit Rebalance(_sps);\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                MAXIMUMS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @dev Max deposit function returning result from `_maxDeposit`. See {IERC4626-maxDeposit} and {sBold-_maxDeposit}.\n    function maxDeposit(address account) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _maxDeposit(account);\n    }\n\n    /// @dev Max deposit function returning result from `_maxMint`. See {IERC4626-maxMint} and {sBold-_maxMint}.\n    function maxMint(address account) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _maxMint(account);\n    }\n\n    /// @dev Max withdraw function returning result from `_maxWithdraw`. See {IERC4626-maxWithdraw} and {sBold-maxWithdraw}.\n    function maxWithdraw(address owner) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _maxWithdraw(owner);\n    }\n\n    /// @dev Max redeem function returning result from `_maxRedeem`. See {IERC4626-maxRedeem} and {sBold-_maxRedeem}.\n    function maxRedeem(address owner) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _maxRedeem(owner);\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                               PREVIEWS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @dev Preview deducting an entry fee on deposit. See {IERC4626-previewDeposit}.\n    function previewDeposit(uint256 assets) public view virtual override nonReentrantReadOnly returns (uint256) {\n        uint256 fee = _feeOnTotal(assets, feeBps);\n\n        return super.previewDeposit(assets - fee);\n    }\n\n    /// @dev Preview adding an entry fee on mint. See {IERC4626-previewMint}.\n    function previewMint(uint256 shares) public view virtual override nonReentrantReadOnly returns (uint256) {\n        uint256 assets = super.previewMint(shares);\n\n        return assets + _feeOnRaw(assets, feeBps);\n    }\n\n    /// @dev Preview withdraw add readOnly reentrancy check. See {IERC4626-previewWithdraw}.\n    function previewWithdraw(uint256 assets) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return super.previewWithdraw(assets);\n    }\n\n    /// @dev Preview redeem add readOnly reentrancy check. See {IERC4626-previewRedeem}.\n    function previewRedeem(uint256 shares) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return super.previewRedeem(shares);\n    }\n\n    /** @dev See {IERC4626-convertToShares}. */\n    function convertToShares(uint256 assets) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _convertToShares(assets, Math.Rounding.Floor);\n    }\n\n    /** @dev See {IERC4626-convertToAssets}. */\n    function convertToAssets(uint256 shares) public view virtual override nonReentrantReadOnly returns (uint256) {\n        return _convertToAssets(shares, Math.Rounding.Floor);\n    }\n\n    /// @dev Total underlying assets owned by the sBOLD contract which are utilized in stability pools.\n    function totalAssets() public view virtual override nonReentrantReadOnly returns (uint256) {\n        (uint256 totalBold, , , ) = _calcFragments();\n\n        return totalBold;\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                                TRANSIENT\n    //////////////////////////////////////////////////////////////*/\n\n    /// @inheritdoc BaseSBold\n    function _checkAndStoreCollValueInBold() internal virtual override {\n        (, uint256 collValue, uint256 collInBold) = _checkCollHealth(true);\n        // Transient store for collaterals and flag\n        TransientStorage.storeCollValues(collValue, collInBold);\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                               GETTERS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Calculates the $sBOLD:BOLD rate.\n    /// @return The $sBOLD:$BOLD rate.\n    function getSBoldRate() public view nonReentrantReadOnly returns (uint256) {\n        (uint256 totalBold, , , ) = _calcFragments();\n\n        return (totalBold + 1).mulDiv(10 ** decimals(), totalSupply() + 10 ** _decimalsOffset());\n    }\n\n    function calcFragments() public view nonReentrantReadOnly returns (uint256, uint256, uint256, uint256) {\n        return _calcFragments();\n    }\n\n    /// @dev Max deposit returns 0 if collateral is above max, the contract is paused or call to oracle has failed. See {IERC4626-maxDeposit}.\n    function _maxDeposit(address account) private view returns (uint256) {\n        (bool success, , ) = _checkCollHealth(false);\n\n        if (!success || paused()) return 0;\n\n        return super.maxDeposit(account);\n    }\n\n    /// @dev Max mint returns 0 if collateral is above max, the contract is paused or call to oracle has failed. See {IERC4626-maxMint}.\n    function _maxMint(address account) private view returns (uint256) {\n        (bool success, , ) = _checkCollHealth(false);\n\n        if (!success || paused()) return 0;\n\n        return super.maxMint(account);\n    }\n\n    /// @dev Max withdraw returns 0 if collateral is above max. See {IERC4626-maxWithdraw}.\n    /// note: Returns an amount up to the one available in $BOLD.\n    function _maxWithdraw(address owner) private view returns (uint256) {\n        (bool success, , ) = _checkCollHealth(false);\n\n        if (!success || paused()) return 0;\n\n        uint256 maxWithdrawAssets = super.maxWithdraw(owner);\n\n        uint256 boldAmount = SpLogic.getBoldAssets(sps, IERC20(asset()));\n\n        if (maxWithdrawAssets > boldAmount) {\n            uint256 deadShareAmount = 10 ** decimals();\n\n            if (boldAmount < deadShareAmount) return 0;\n\n            return boldAmount - deadShareAmount;\n        }\n\n        return maxWithdrawAssets;\n    }\n\n    /// @dev Max redeem returns 0 if collateral is above max. See {IERC4626-maxRedeem}.\n    /// note: Returns an amount up to the one available in $BOLD, converted in shares.\n    function _maxRedeem(address owner) private view returns (uint256) {\n        (bool success, , ) = _checkCollHealth(false);\n\n        if (!success || paused()) return 0;\n\n        uint256 maxWithdrawAssets = super.maxWithdraw(owner);\n\n        uint256 boldAmount = SpLogic.getBoldAssets(sps, IERC20(asset()));\n\n        if (maxWithdrawAssets > boldAmount) {\n            uint256 deadShareAmount = 10 ** decimals();\n\n            if (boldAmount < deadShareAmount) return 0;\n\n            return _convertToShares(boldAmount - deadShareAmount, Math.Rounding.Floor);\n        }\n\n        return super.maxRedeem(owner);\n    }\n\n    /// @notice Calculates the total value in $BOLD of the assets in the contract.\n    /// @return The total value in USD, $BOLD amount and collateral in USD.\n    function _calcFragments() private view returns (uint256, uint256, uint256, uint256) {\n        address bold = asset();\n        // Get compounded $BOLD amount\n        uint256 boldAmount = SpLogic.getBoldAssets(sps, IERC20(bold));\n        // Get collateral value in USD and $BOLD\n        (, uint256 collValue, uint256 collInBold) = _calcCollValue(bold, true);\n        // Calculate based on the minimum amount to be received after swap\n        uint256 collToBoldMinOut = SwapLogic.calcMinOut(collInBold, maxSlippage);\n        // Apply fees after swap\n        (uint256 collInBoldNet, , ) = SwapLogic.applyFees(collToBoldMinOut, swapFeeBps, rewardBps);\n        // Calculate total $BOLD value\n        uint256 totalBold = boldAmount + collInBoldNet;\n\n        return (totalBold, boldAmount, collValue, collInBold);\n    }\n\n    /// @notice Converts the $BOLD assets to shares based on $sBOLD exchange rate.\n    /// @return The calculated $sBOLD share, based on the total value held.\n    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view override returns (uint256) {\n        return\n            assets.mulDiv(\n                10 ** decimals(),\n                _getSBoldRateWithRounding(rounding == Math.Rounding.Floor ? Math.Rounding.Ceil : Math.Rounding.Floor),\n                rounding\n            );\n    }\n\n    /// @notice Converts the $sBOLD shares to $BOLD assets based on $sBOLD exchange rate.\n    /// @return The calculated $BOLD assets, based on the total value held.\n    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view override returns (uint256) {\n        return shares.mulDiv(_getSBoldRateWithRounding(rounding), 10 ** decimals(), rounding);\n    }\n\n    /// @notice Calculates the $sBOLD:BOLD rate with input rounding.\n    /// @param rounding Type of rounding on math calculations.\n    /// @return The $sBOLD:$BOLD rate.\n    function _getSBoldRateWithRounding(Math.Rounding rounding) private view returns (uint256) {\n        (uint256 totalBold, , , ) = _calcFragments();\n\n        return (totalBold + 1).mulDiv(10 ** decimals(), totalSupply() + 10 ** _decimalsOffset(), rounding);\n    }\n\n    /// @dev Calculates the fees that should be added to an amount `assets` that does not already include fees.\n    /// Used in {IERC4626-mint} operations.\n    function _feeOnRaw(uint256 assets, uint256 feeBasisPoints) internal pure returns (uint256) {\n        return assets.mulDiv(feeBasisPoints, Constants.BPS_DENOMINATOR, Math.Rounding.Ceil);\n    }\n\n    /// @dev Calculates the fee part of an amount `assets` that already includes fees.\n    /// Used in {IERC4626-deposit} operations.\n    function _feeOnTotal(uint256 assets, uint256 feeBasisPoints) internal pure returns (uint256) {\n        return assets.mulDiv(feeBasisPoints, feeBasisPoints + Constants.BPS_DENOMINATOR, Math.Rounding.Ceil);\n    }\n\n    /// @notice Calculates the collateral value in USD and $BOLD from all SPs.\n    /// @param _bold Asset contract address.\n    /// @param _revert Indication to revert on errors.\n    /// @return success Success result from function.\n    /// @return collValue The total collateral value.\n    /// @return collInBold The collateral value denominated in $BOLD.\n    function _calcCollValue(\n        address _bold,\n        bool _revert\n    ) private view returns (bool success, uint256 collValue, uint256 collInBold) {\n        // Return values from transient storage\n        if (TransientStorage.loadCollsFlag())\n            return (true, TransientStorage.loadCollValue(), TransientStorage.loadCollInBold());\n\n        CollBalance[] memory collBalances = SpLogic.getCollBalances(sps, false);\n\n        (success, collValue) = QuoteLogic.getAggregatedQuote(priceOracle, collBalances, _revert);\n\n        if (success)\n            try priceOracle.getQuote(10 ** decimals(), _bold) returns (uint256 boldUnitQuote) {\n                collInBold = collValue.mulDiv(10 ** Constants.ORACLE_PRICE_PRECISION, boldUnitQuote);\n            } catch (bytes memory data) {\n                if (_revert) revert(string(data));\n\n                return (false, collValue, 0);\n            }\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                               VALIDATIONS\n    //////////////////////////////////////////////////////////////*/\n\n    /// @notice Checks if the collateral value in $BOLD is over the maximum allowed.\n    function _checkCollHealth(bool _revert) private view returns (bool, uint256, uint256) {\n        (bool success, uint256 collValue, uint256 collValueInBold) = _calcCollValue(asset(), _revert);\n\n        if (!success) return (false, 0, 0);\n\n        if (collValueInBold <= maxCollInBold) return (true, collValue, collValueInBold);\n\n        if (_revert) revert CollOverLimit();\n\n        return (false, collValue, collValueInBold);\n    }\n}\n"}},"matchId":"6437260","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2025-06-12T11:56:48Z","match":"exact_match","chainId":"1","address":"0x50Bd66D59911F5e086Ec87aE43C811e0D059DD11"}