{"sources":{"@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Proxy.sol)\n\npragma solidity ^0.8.20;\n\nimport {Proxy} from \"../Proxy.sol\";\nimport {ERC1967Utils} from \"./ERC1967Utils.sol\";\n\n/**\n * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an\n * implementation address that can be changed. This address is stored in storage in the location specified by\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the\n * implementation behind the proxy.\n */\ncontract ERC1967Proxy is Proxy {\n    /**\n     * @dev Initializes the upgradeable proxy with an initial implementation specified by `implementation`.\n     *\n     * If `_data` is nonempty, it's used as data in a delegate call to `implementation`. This will typically be an\n     * encoded function call, and allows initializing the storage of the proxy like a Solidity constructor.\n     *\n     * Requirements:\n     *\n     * - If `data` is empty, `msg.value` must be zero.\n     */\n    constructor(address implementation, bytes memory _data) payable {\n        ERC1967Utils.upgradeToAndCall(implementation, _data);\n    }\n\n    /**\n     * @dev Returns the current implementation address.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`\n     */\n    function _implementation() internal view virtual override returns (address) {\n        return ERC1967Utils.getImplementation();\n    }\n}\n"},"@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Utils.sol)\n\npragma solidity ^0.8.20;\n\nimport {IBeacon} from \"../beacon/IBeacon.sol\";\nimport {Address} from \"../../utils/Address.sol\";\nimport {StorageSlot} from \"../../utils/StorageSlot.sol\";\n\n/**\n * @dev This abstract contract provides getters and event emitting update functions for\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\n */\nlibrary ERC1967Utils {\n    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.\n    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.\n    /**\n     * @dev Emitted when the implementation is upgraded.\n     */\n    event Upgraded(address indexed implementation);\n\n    /**\n     * @dev Emitted when the admin account has changed.\n     */\n    event AdminChanged(address previousAdmin, address newAdmin);\n\n    /**\n     * @dev Emitted when the beacon is changed.\n     */\n    event BeaconUpgraded(address indexed beacon);\n\n    /**\n     * @dev Storage slot with the address of the current implementation.\n     * This is the keccak-256 hash of \"eip1967.proxy.implementation\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n\n    /**\n     * @dev The `implementation` of the proxy is invalid.\n     */\n    error ERC1967InvalidImplementation(address implementation);\n\n    /**\n     * @dev The `admin` of the proxy is invalid.\n     */\n    error ERC1967InvalidAdmin(address admin);\n\n    /**\n     * @dev The `beacon` of the proxy is invalid.\n     */\n    error ERC1967InvalidBeacon(address beacon);\n\n    /**\n     * @dev An upgrade function sees `msg.value > 0` that may be lost.\n     */\n    error ERC1967NonPayable();\n\n    /**\n     * @dev Returns the current implementation address.\n     */\n    function getImplementation() internal view returns (address) {\n        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 implementation slot.\n     */\n    function _setImplementation(address newImplementation) private {\n        if (newImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(newImplementation);\n        }\n        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;\n    }\n\n    /**\n     * @dev Performs implementation upgrade with additional setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-Upgraded} event.\n     */\n    function upgradeToAndCall(address newImplementation, bytes memory data) internal {\n        _setImplementation(newImplementation);\n        emit Upgraded(newImplementation);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(newImplementation, data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Storage slot with the admin of the contract.\n     * This is the keccak-256 hash of \"eip1967.proxy.admin\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\n\n    /**\n     * @dev Returns the current admin.\n     *\n     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using\n     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.\n     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`\n     */\n    function getAdmin() internal view returns (address) {\n        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new address in the EIP1967 admin slot.\n     */\n    function _setAdmin(address newAdmin) private {\n        if (newAdmin == address(0)) {\n            revert ERC1967InvalidAdmin(address(0));\n        }\n        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;\n    }\n\n    /**\n     * @dev Changes the admin of the proxy.\n     *\n     * Emits an {IERC1967-AdminChanged} event.\n     */\n    function changeAdmin(address newAdmin) internal {\n        emit AdminChanged(getAdmin(), newAdmin);\n        _setAdmin(newAdmin);\n    }\n\n    /**\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\n     * This is the keccak-256 hash of \"eip1967.proxy.beacon\" subtracted by 1.\n     */\n    // solhint-disable-next-line private-vars-leading-underscore\n    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\n\n    /**\n     * @dev Returns the current beacon.\n     */\n    function getBeacon() internal view returns (address) {\n        return StorageSlot.getAddressSlot(BEACON_SLOT).value;\n    }\n\n    /**\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\n     */\n    function _setBeacon(address newBeacon) private {\n        if (newBeacon.code.length == 0) {\n            revert ERC1967InvalidBeacon(newBeacon);\n        }\n\n        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;\n\n        address beaconImplementation = IBeacon(newBeacon).implementation();\n        if (beaconImplementation.code.length == 0) {\n            revert ERC1967InvalidImplementation(beaconImplementation);\n        }\n    }\n\n    /**\n     * @dev Change the beacon and trigger a setup call if data is nonempty.\n     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected\n     * to avoid stuck value in the contract.\n     *\n     * Emits an {IERC1967-BeaconUpgraded} event.\n     *\n     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since\n     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for\n     * efficiency.\n     */\n    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {\n        _setBeacon(newBeacon);\n        emit BeaconUpgraded(newBeacon);\n\n        if (data.length > 0) {\n            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);\n        } else {\n            _checkNonPayable();\n        }\n    }\n\n    /**\n     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract\n     * if an upgrade doesn't perform an initialization call.\n     */\n    function _checkNonPayable() private {\n        if (msg.value > 0) {\n            revert ERC1967NonPayable();\n        }\n    }\n}\n"},"@openzeppelin/contracts/proxy/Proxy.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/Proxy.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM\n * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to\n * be specified by overriding the virtual {_implementation} function.\n *\n * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a\n * different contract through the {_delegate} function.\n *\n * The success and return data of the delegated call will be returned back to the caller of the proxy.\n */\nabstract contract Proxy {\n    /**\n     * @dev Delegates the current call to `implementation`.\n     *\n     * This function does not return to its internal call site, it will return directly to the external caller.\n     */\n    function _delegate(address implementation) internal virtual {\n        assembly {\n            // Copy msg.data. We take full control of memory in this inline assembly\n            // block because it will not return to Solidity code. We overwrite the\n            // Solidity scratch pad at memory position 0.\n            calldatacopy(0, 0, calldatasize())\n\n            // Call the implementation.\n            // out and outsize are 0 because we don't know the size yet.\n            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)\n\n            // Copy the returned data.\n            returndatacopy(0, 0, returndatasize())\n\n            switch result\n            // delegatecall returns 0 on error.\n            case 0 {\n                revert(0, returndatasize())\n            }\n            default {\n                return(0, returndatasize())\n            }\n        }\n    }\n\n    /**\n     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback\n     * function and {_fallback} should delegate.\n     */\n    function _implementation() internal view virtual returns (address);\n\n    /**\n     * @dev Delegates the current call to the address returned by `_implementation()`.\n     *\n     * This function does not return to its internal call site, it will return directly to the external caller.\n     */\n    function _fallback() internal virtual {\n        _delegate(_implementation());\n    }\n\n    /**\n     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other\n     * function in the contract matches the call data.\n     */\n    fallback() external payable virtual {\n        _fallback();\n    }\n}\n"},"@openzeppelin/contracts/proxy/beacon/IBeacon.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\n */\ninterface IBeacon {\n    /**\n     * @dev Must return an address that can be used as a delegate call target.\n     *\n     * {UpgradeableBeacon} will check that this address is a contract.\n     */\n    function implementation() external view returns (address);\n}\n"},"@openzeppelin/contracts/utils/Address.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev The ETH balance of the account is not enough to perform the operation.\n     */\n    error AddressInsufficientBalance(address account);\n\n    /**\n     * @dev There's no code at `target` (it is not a contract).\n     */\n    error AddressEmptyCode(address target);\n\n    /**\n     * @dev A call to an address target failed. The target may have reverted.\n     */\n    error FailedInnerCall();\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        if (address(this).balance < amount) {\n            revert AddressInsufficientBalance(address(this));\n        }\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        if (!success) {\n            revert FailedInnerCall();\n        }\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason or custom error, it is bubbled\n     * up by this function (like regular Solidity function calls). However, if\n     * the call reverted with no returned reason, this function reverts with a\n     * {FailedInnerCall} error.\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     */\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\n        if (address(this).balance < value) {\n            revert AddressInsufficientBalance(address(this));\n        }\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target\n     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an\n     * unsuccessful call.\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata\n    ) internal view returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            // only check if target is a contract if the call was successful and the return data is empty\n            // otherwise we already know that it was a contract\n            if (returndata.length == 0 && target.code.length == 0) {\n                revert AddressEmptyCode(target);\n            }\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the\n     * revert reason or with a default {FailedInnerCall} error.\n     */\n    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {\n        if (!success) {\n            _revert(returndata);\n        } else {\n            return returndata;\n        }\n    }\n\n    /**\n     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.\n     */\n    function _revert(bytes memory returndata) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert FailedInnerCall();\n        }\n    }\n}\n"},"@openzeppelin/contracts/utils/StorageSlot.sol":{"content":"// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        /// @solidity memory-safe-assembly\n        assembly {\n            r.slot := store.slot\n        }\n    }\n}\n"}},"abi":[{"type":"constructor","inputs":[{"name":"implementation","type":"address","internalType":"address"},{"name":"_data","type":"bytes","internalType":"bytes"}],"stateMutability":"payable"},{"name":"AddressEmptyCode","type":"error","inputs":[{"name":"target","type":"address","internalType":"address"}]},{"name":"ERC1967InvalidImplementation","type":"error","inputs":[{"name":"implementation","type":"address","internalType":"address"}]},{"name":"ERC1967NonPayable","type":"error","inputs":[]},{"name":"FailedInnerCall","type":"error","inputs":[]},{"name":"Upgraded","type":"event","inputs":[{"name":"implementation","type":"address","indexed":true,"internalType":"address"}],"anonymous":false},{"type":"fallback","stateMutability":"payable"}],"matchId":"23097409","creationMatch":"exact_match","runtimeMatch":"exact_match","verifiedAt":"2026-03-13T18:59:47Z","match":"exact_match","chainId":"1","address":"0x5086bf358635B81D8C47C66d1C8b9E567Db70c72"}